Professional Documents
Culture Documents
txt
// Created on 10/30/23 at 22:49:38
// AMISCE Utility. Ver 5.05.01.0002
// Copyright (c) 2021 AMI. All rights reserved.
HIICrc32= FC6A7CE0
Setup Question = SAR 2400 MHz Max Allowed for Group 1 (FCC)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =12F // Do NOT change this line
Offset =776
Width =01
BIOS Default =<255>
Value =<255>
Setup Question = SAR 2400 MHz Chain A Offset for Group 1 (FCC)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =130 // Do NOT change this line
Offset =777
Width =01
BIOS Default =<0>
Value =<0>
Setup Question = SAR 2400 MHz Chain B Offset for Group 1 (FCC)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =131 // Do NOT change this line
Offset =778
Width =01
BIOS Default =<0>
Value =<0>
Setup Question = SAR 5200 MHz Max Allowed for Group 1 (FCC)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =132 // Do NOT change this line
Offset =779
Width =01
BIOS Default =<255>
Value =<255>
Setup Question = SAR 5200 MHz Chain A Offset for Group 1 (FCC)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =133 // Do NOT change this line
Offset =77A
Width =01
BIOS Default =<0>
Value =<0>
Setup Question = SAR 5200 MHz Chain B Offset for Group 1 (FCC)
Help String = Defines the WiFi SAR Tx Power Limit - 8bit unsigned with 5bit integer
and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 = 31.875dB.
Each step is equivalent to 0.125dB
Token =134 // Do NOT change this line
Offset =77B
Width =01
BIOS Default =<0>
Value =<0>
Setup Question = SAR 6000-7000 MHz Max Allowed for Group 1 (FCC)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =135 // Do NOT change this line
Offset =A21
Width =01
BIOS Default =<255>
Value =<255>
Setup Question = SAR 6000-7000 MHz Chain A Offset for Group 1 (FCC)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =136 // Do NOT change this line
Offset =A22
Width =01
BIOS Default =<0>
Value =<0>
Setup Question = SAR 6000-7000 MHz Chain B Offset for Group 1 (FCC)
Help String = Defines the WiFi SAR Tx Power Limit - 8bit unsigned with 5bit integer
and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 = 31.875dB.
Each step is equivalent to 0.125dB
Token =137 // Do NOT change this line
Offset =A23
Width =01
BIOS Default =<0>
Value =<0>
Setup Question = SAR 2400 MHz Max Allowed for Group 2 (EU Japan)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =138 // Do NOT change this line
Offset =77C
Width =01
BIOS Default =<255>
Value =<255>
Setup Question = SAR 2400 MHz Chain A Offset for Group 2 (EU Japan)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =139 // Do NOT change this line
Offset =77D
Width =01
BIOS Default =<0>
Value =<0>
Setup Question = SAR 2400 MHz Chain B Offset for Group 2 (EU Japan)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =13A // Do NOT change this line
Offset =77E
Width =01
BIOS Default =<0>
Value =<0>
Setup Question = SAR 5200 MHz Max Allowed for Group 2 (EU Japan)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =13B // Do NOT change this line
Offset =77F
Width =01
BIOS Default =<255>
Value =<255>
Setup Question = SAR 5200 MHz Chain A Offset for Group 2 (EU Japan)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =13C // Do NOT change this line
Offset =780
Width =01
BIOS Default =<0>
Value =<0>
Setup Question = SAR 5200 MHz Chain B Offset for Group 2 (EU Japan)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =13D // Do NOT change this line
Offset =781
Width =01
BIOS Default =<0>
Value =<0>
Setup Question = SAR 6000-7000 MHz Max Allowed for Group 2 (EU Japan)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =13E // Do NOT change this line
Offset =A24
Width =01
BIOS Default =<255>
Value =<255>
Setup Question = SAR 6000-7000 MHz Chain A Offset for Group 2 (EU Japan)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =13F // Do NOT change this line
Offset =A25
Width =01
BIOS Default =<0>
Value =<0>
Setup Question = SAR 6000-7000 MHz Chain B Offset for Group 2 (EU Japan)
Help String = Defines the WiFi SAR Tx Power Limit - 8bit unsigned with 5bit integer
and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 = 31.875dB.
Each step is equivalent to 0.125dB
Token =140 // Do NOT change this line
Offset =A26
Width =01
BIOS Default =<0>
Value =<0>
Setup Question = SAR 2400 MHz Max Allowed for Group 3 (ROW)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =141 // Do NOT change this line
Offset =782
Width =01
BIOS Default =<255>
Value =<255>
Setup Question = SAR 2400 MHz Chain A Offset for Group 3 (ROW)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =142 // Do NOT change this line
Offset =783
Width =01
BIOS Default =<0>
Value =<0>
Setup Question = SAR 2400 MHz Chain B Offset for Group 3 (ROW)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =143 // Do NOT change this line
Offset =784
Width =01
BIOS Default =<0>
Value =<0>
Setup Question = SAR 5200 MHz Max Allowed for Group 3 (ROW)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =144 // Do NOT change this line
Offset =785
Width =01
BIOS Default =<255>
Value =<255>
Setup Question = SAR 5200 MHz Chain A Offset for Group 3 (ROW)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =145 // Do NOT change this line
Offset =786
Width =01
BIOS Default =<0>
Value =<0>
Setup Question = SAR 5200 MHz Chain B Offset for Group 3 (ROW)
Help String = Defines the WiFi SAR Tx Power Limit - 8bit unsigned with 5bit integer
and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 = 31.875dB.
Each step is equivalent to 0.125dB
Token =146 // Do NOT change this line
Offset =787
Width =01
BIOS Default =<0>
Value =<0>
Setup Question = SAR 6000-7000 MHz Max Allowed for Group 3 (ROW)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =147 // Do NOT change this line
Offset =A27
Width =01
BIOS Default =<255>
Value =<255>
Setup Question = SAR 6000-7000 MHz Chain A Offset for Group 3 (ROW)
Help String = Defines the WiFi SAR Delta Value to be applied - 8bit unsigned with
5bit integer and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 =
31.875dB. Each step is equivalent to 0.125dB
Token =148 // Do NOT change this line
Offset =A28
Width =01
BIOS Default =<0>
Value =<0>
Setup Question = SAR 6000-7000 MHz Chain B Offset for Group 3 (ROW)
Help String = Defines the WiFi SAR Tx Power Limit - 8bit unsigned with 5bit integer
and 3bit fractional. 0x00 = 0b00000000 = 0.125dB; 0xFF = 0b11111111 = 31.875dB.
Each step is equivalent to 0.125dB
Token =149 // Do NOT change this line
Offset =A29
Width =01
BIOS Default =<0>
Value =<0>
Setup Question = Frequency Limit for Mixed 2DPC DDR5 1 Rank 8GB and 8GB
Help String = Override the reduced speed in mixed 2DPC config or non-POR 2DPC
config. 0=Auto, otherwise speed in MT/s
Token =5B6 // Do NOT change this line
Offset =469
Width =02
BIOS Default =<2000>
Value =<2000>
Setup Question = Frequency Limit for Mixed 2DPC DDR5 1 Rank 16GB and 16GB
Help String = Override the reduced speed in mixed 2DPC config or non-POR 2DPC
config. 0=Auto, otherwise speed in MT/s
Token =5B7 // Do NOT change this line
Offset =46B
Width =02
BIOS Default =<2000>
Value =<2000>
Setup Question = Frequency Limit for Mixed 2DPC DDR5 1 Rank 8GB and 16GB
Help String = Override the reduced speed in mixed 2DPC config or non-POR 2DPC
config. 0=Auto, otherwise speed in MT/s
Token =5B8 // Do NOT change this line
Offset =46D
Width =02
BIOS Default =<2000>
Value =<2000>
Setup Question = SA GV
Help String = System Agent Geyserville. Can disable, fix to a specific point, or
enable frequency switching.
Token =276B // Do NOT change this line
Offset =1F1
Width =01
BIOS Default =[00]Disabled
Options =*[00]Disabled // Move "*" to the desired Option
[05]Enabled
[01]Fixed to 1st Point
[02]Fixed to 2nd Point
[03]Fixed to 3rd Point
[04]Fixed to 4th Point
Setup Question = For LPDDR Only: DDR PowerDown and idle counter
Help String = For LPDDR Only: BIOS: BIOS is in control of DDR CKE mode and idle
timer value. PCODE: pcode will manage the modes.
Token =6F0 // Do NOT change this line
Offset =220
Width =01
BIOS Default =[01]BIOS
Options =[00]PCODE // Move "*" to the desired Option
*[01]BIOS
Setup Question = RRT volumes can span internal and eSATA drives
Help String = Enable/Disable RRT volumes can span internal and eSATA drives.
Token =9A2 // Do NOT change this line
Offset =184
Width =01
BIOS Default =[01]Enabled
Options =[00]Disabled // Move "*" to the desired Option
*[01]Enabled
Options =[A0]CPU Fan1 Smart Fan Control // Move "*" to the desired Option
[AD]CPU Fan1 level 4 Temperature
[AC]CPU Fan1 level 3 Temperature
[AB]CPU Fan1 level 2 Temperature
[AA]CPU Fan1 level 1 Temperature
[D2]CPU Fan1 level 1 Fan Speed
[D3]CPU Fan1 level 2 Fan Speed
[D4]CPU Fan1 level 3 Fan Speed
[D5]CPU Fan1 level 4 Fan Speed
[D6]please check
Setup Question = UiDB DragDropFrame Group 02
Help String =
Token =2B51 // Do NOT change this line
Offset =11C4
Width =02
Options =[A1]PUMP Fan1 Smart Fan Control // Move "*" to the desired Option
[B1]PUMP Fan1 level 4 Temperature
[B0]PUMP Fan1 level 3 Temperature
[AF]PUMP Fan1 level 2 Temperature
[AE]PUMP Fan1 level 1 Temperature
[D7]PUMP Fan1 level 1 Fan Speed
[D8]PUMP Fan1 level 2 Fan Speed
[D9]PUMP Fan1 level 3 Fan Speed
[DA]PUMP Fan1 level 4 Fan Speed
[DB]please check
Options =[A2]SYS Fan1 Smart Fan Control // Move "*" to the desired Option
[B5]SYS Fan1 level 4 Temperature
[B4]SYS Fan1 level 3 Temperature
[B3]SYS Fan1 level 2 Temperature
[B2]SYS Fan1 level 1 Temperature
[DC]SYS Fan1 level 1 Fan Speed
[DD]SYS Fan1 level 2 Fan Speed
[DE]SYS Fan1 level 3 Fan Speed
[DF]SYS Fan1 level 4 Fan Speed
[E0]SYS Fan1 Control
Options =[A3]SYS Fan2 Smart Fan Control // Move "*" to the desired Option
[B9]SYS Fan2 level 4 Temperature
[B8]SYS Fan2 level 3 Temperature
[B7]SYS Fan2 level 2 Temperature
[B6]SYS Fan2 level 1 Temperature
[E1]SYS Fan2 level 1 Fan Speed
[E2]SYS Fan2 level 2 Fan Speed
[E3]SYS Fan2 level 3 Fan Speed
[E4]SYS Fan2 level 4 Fan Speed
[E5]SYS Fan2 Control
Options =[A4]SYS Fan3 Smart Fan Control // Move "*" to the desired Option
[BD]SYS Fan3 level 4 Temperature
[BC]SYS Fan3 level 3 Temperature
[BB]SYS Fan3 level 2 Temperature
[BA]SYS Fan3 level 1 Temperature
[E6]SYS Fan3 level 1 Fan Speed
[E7]SYS Fan3 level 2 Fan Speed
[E8]SYS Fan3 level 3 Fan Speed
[E9]SYS Fan3 level 4 Fan Speed
[EA]SYS Fan3 Control
Options =[A5]SYS Fan4 Smart Fan Control // Move "*" to the desired Option
[C1]SYS Fan4 level 4 Temperature
[C0]SYS Fan4 level 3 Temperature
[BF]SYS Fan4 level 2 Temperature
[BE]SYS Fan4 level 1 Temperature
[EB]SYS Fan4 level 1 Fan Speed
[EC]SYS Fan4 level 2 Fan Speed
[ED]SYS Fan4 level 3 Fan Speed
[EE]SYS Fan4 level 4 Fan Speed
[EF]SYS Fan4 Control
Options =[A6]SYS Fan5 Smart Fan Control // Move "*" to the desired Option
[C5]SYS Fan5 level 4 Temperature
[C4]SYS Fan5 level 3 Temperature
[C3]SYS Fan5 level 2 Temperature
[C2]SYS Fan5 level 1 Temperature
[F0]SYS Fan5 level 1 Fan Speed
[F1]SYS Fan5 level 2 Fan Speed
[F2]SYS Fan5 level 3 Fan Speed
[F3]SYS Fan5 level 4 Fan Speed
[F4]SYS Fan5 Control
Options =[A7]SYS Fan6 Smart Fan Control // Move "*" to the desired Option
[C9]SYS Fan6 level 4 Temperature
[C8]SYS Fan6 level 3 Temperature
[C7]SYS Fan6 level 2 Temperature
[C6]SYS Fan6 level 1 Temperature
[F5]SYS Fan6 level 1 Fan Speed
[F6]SYS Fan6 level 2 Fan Speed
[F7]SYS Fan6 level 3 Fan Speed
[F8]SYS Fan6 level 4 Fan Speed
[F9]SYS Fan6 Control
Setup Question = UiDB DragDropFrame Group 09
Help String =
Token =2B58 // Do NOT change this line
Offset =11D2
Width =02
Options =[A8]SYS Fan7 Smart Fan Control // Move "*" to the desired Option
[CD]SYS Fan7 level 4 Temperature
[CC]SYS Fan7 level 3 Temperature
[CB]SYS Fan7 level 2 Temperature
[CA]SYS Fan7 level 1 Temperature
[FA]SYS Fan7 level 1 Fan Speed
[FB]SYS Fan7 level 2 Fan Speed
[FC]SYS Fan7 level 3 Fan Speed
[FD]SYS Fan7 level 4 Fan Speed
[FE]SYS Fan7 Control
Options =[A9]SYS Fan8 Smart Fan Control // Move "*" to the desired Option
[D1]SYS Fan8 level 4 Temperature
[D0]SYS Fan8 level 3 Temperature
[CF]SYS Fan8 level 2 Temperature
[CE]SYS Fan8 level 1 Temperature
[FF]SYS Fan8 level 1 Fan Speed
[100]SYS Fan8 level 2 Fan Speed
[101]SYS Fan8 level 3 Fan Speed
[102]SYS Fan8 level 4 Fan Speed
[103]SYS Fan8 Control
Options =[122]SYS Fan9 Smart Fan Control // Move "*" to the desired Option
[126]SYS Fan9 level 4 Temperature
[125]SYS Fan9 level 3 Temperature
[124]SYS Fan9 level 2 Temperature
[123]SYS Fan9 level 1 Temperature
[127]SYS Fan9 level 1 Fan Speed
[128]SYS Fan9 level 2 Fan Speed
[129]SYS Fan9 level 3 Fan Speed
[12A]SYS Fan9 level 4 Fan Speed
[12B]SYS Fan9 Control
Options =[2D3]SYS Fan5 Smart Fan Control // Move "*" to the desired Option
[2D7]SYS Fan10 level 4 Temperature
[2D6]SYS Fan10 level 3 Temperature
[2D5]SYS Fan10 level 2 Temperature
[2D4]SYS Fan10 level 1 Temperature
[2DB]STR_RESEARCH_SPEED01
[2DC]STR_RESEARCH_SPEED02
[2DD]STR_RESEARCH_SPEED03
[2DE]STR_RESEARCH_SPEED04
[2E2]STR_RESEARCH_SPEED_M
Options =[301]SYS Fan5 Smart Fan Control // Move "*" to the desired Option
[305]SYS Fan10 level 4 Temperature
[304]SYS Fan10 level 3 Temperature
[303]SYS Fan10 level 2 Temperature
[302]SYS Fan10 level 1 Temperature
[309]SYS Fan10 level 1 Fan Speed
[30A]SYS Fan10 level 2 Fan Speed
[30B]SYS Fan10 level 3 Fan Speed
[30C]SYS Fan10 level 4 Fan Speed
[310]SYS Fan10 Control