Professional Documents
Culture Documents
DE120 Example Spec
DE120 Example Spec
Example Specification
Drift eliminators shall be of the blade-type, Brentwood DE120. The modules shall be made from UV-protected rigid PVC that meets CTI
STD-136 and have a minimum Oxygen Index of 30 per ASTM D2863. The modules shall be solvent bonded at designated glue pads and
shall be designed to nest to prevent drift-bypass between modules. The passageways shall cause the air to make at least three (3) directional
changes.
The modules shall measure 5.75” (146mm) D x up to 24” (610mm) W x up to 144” (3658mm) L.
The modules shall be able to be supported on 72” (1829mm) centers with minimal deflection at design conditions.
The installation shall be accordance with manufacturers recommendations and guidelines in order to meet the specified drift rate.