Material UNS Number S30400 Material Form used Plate Allowable Stress At Temperature S 1290.01 kgf/cm² Allowable Stress At Ambient SA 1406.14 kgf/cm² Yield Stress At Temperature Sy 1464.95 kgf/cm² Joint efficiency for Shell Joint E 1.00
Design Length of Section L 6999.9995 mm
Inside Diameter of Cylindrical Shell D 1350.0000 mm Minimum Thickness of Pipe or Plate T 6.0000 mm
Shell/Head Int. Corrosion Allowance CA 0.0000 mm
Skip UG-16(b) Min. thickness calculation NO
Type of Element: Cylindrical Shell
Internal pressure results, Shell Number 1, Desc.: shell 105cp1b
ASME Code, Section VIII, Division 1, 2007
Thickness Due to Internal Pressure (Tr):
= (P*(D/2+CA)) / (S*E-0.6*P) per UG-27 (c)(1) = (10.50*(1350.0000/2+0.0000))/(1290.01*1.00-0.6*10.50) = 5.5211 + 0.0000 = 5.5211 mm
Max. All. Working Pressure at Given Thickness (MAWP):
Required Thickness plus Corrosion Allowance, Trca 5.5211 mm Actual Thickness as Given in Input 6.0000 mm Maximum Allowable Working Pressure MAWP 11.406 kgf/cm² Maximum Allowable Pressure, NC MAPNC 12.433 kgf/cm² Design Pressure as Given in Input P 10.500 kgf/cm²
Hydrostatic Test Pressures ( Measured at High Point ):
Hydrotest per UG-99(b); 1.3 * MAWP * Sa/S 16.16 kgf/cm² Hydrotest per UG-99(c); 1.3 * MAPNC 16.16 kgf/cm² Pneumatic per UG-100 ; 1.1 * MAWP * Sa/S 13.68 kgf/cm²