Professional Documents
Culture Documents
= 103.89 cm^2
SUMMARY OF RESULTS:
= 103.89 cm^2
SUMMARY OF RESULTS:
Weld Group Inertia about the Circumferential Axis ILC 3956.829 cm**4
Weld Group Centroid distance in the Long. Direction YLL 135.000 mm.
Dist. of Weld Group Centroid from Lug bottom YLL_B 125.000 mm.
Weld Group Inertia about the Longitudinal Axis ILL 167.958 cm**4
Weld Group Centroid Distance in the Circ. Direction YLC 22.500 mm.
= Ssll + Sblf
= 38.721 + 54.039
= 92.76 N./mm^2
Summary of Results
Note:
WRC Bulletin 537 provides equations for the dimensionless curves
found in bulletin 107. As noted in the foreword to bulletin 537,
"537 is equivalent to WRC 107". Where 107 is printed in the
results below, "537" can be interchanged with "107".
Str. Int. | 79.1| 54.2| 64.6| 41.5| 218.8| 175.4| 96.0| 98.5|
Note - The ! mark next to the figure name denotes curve value exceeded.
------------------------------------------------------------------------------------------------
272
Because only sustained loads were specified, the Pm+Pl+Q allowable was 3 * Smh.
------------------------------------------------------------------------------------------------
Because only sustained loads were specified, the Pm+Pl+Q allowable was 3 * Smh.
Note:
WRC Bulletin 537 provides equations for the dimensionless curves
found in bulletin 107. As noted in the foreword to bulletin 537,
"537 is equivalent to WRC 107". Where 107 is printed in the
results below, "537" can be interchanged with "107".
Str. Int. | 275.5| 208.9| 84.6| 86.1| 102.9| 66.5| 102.9| 66.5|
Note - The ! mark next to the figure name denotes curve value exceeded.
------------------------------------------------------------------------------------------------
277
Because only sustained loads were specified, the Pm+Pl+Q allowable was 3 * Smh.
------------------------------------------------------------------------------------------------
Because only sustained loads were specified, the Pm+Pl+Q allowable was 3 * Smh.
Note:
WRC Bulletin 537 provides equations for the dimensionless curves
found in bulletin 107. As noted in the foreword to bulletin 537,
"537 is equivalent to WRC 107". Where 107 is printed in the
results below, "537" can be interchanged with "107".
Note - The ! mark next to the figure name denotes curve value exceeded.
Note - The ! mark next to the figure name denotes curve value exceeded.
------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------
Circ. Pm (SUS) | 0.0| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0|
Circ. Pl (SUS) | -39.8| -39.8| -16.1| -16.1| -26.0| -26.0| -26.0| -26.0|
Circ. Q (SUS) | -258.6| 258.6| -68.3| 68.3| -193.7| 193.7| -193.7| 193.7|
------------------------------------------------------------------------------------------------
Long. Pm (SUS) | 0.0| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0|
Long. Pl (SUS) | -32.8| -32.8| -21.7| -21.7| -28.6| -28.6| -28.6| -28.6|
Long. Q (SUS) | -266.8| 266.8| -60.7| 60.7| -128.8| 128.8| -128.8| 128.8|
------------------------------------------------------------------------------------------------
Shear Pm (SUS) | 0.0| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0|
Shear Pl (SUS) | 0.0| 0.0| 0.0| 0.0| -8.0| -8.0| 8.0| 8.0|
Shear Q (SUS) | 0.0| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0|
Pm (SUS) | 0.0| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0| 0.0|
------------------------------------------------------------------------------------------------
Pm+Pl (SUS) | 39.8| 39.8| 21.7| 21.7| 35.4| 35.4| 35.4| 35.4|
------------------------------------------------------------------------------------------------
Pm+Pl+Q (Total)| 299.6| 233.9| 84.4| 52.2| 220.7| 168.6| 220.7| 168.6|
Because only sustained loads were specified, the Pm+Pl+Q allowable was 3 * Smh.
------------------------------------------------------------------------------------------------
Because only sustained loads were specified, the Pm+Pl+Q allowable was 3 * Smh.