Professional Documents
Culture Documents
S. No Contents Page No
2 Object 2
3 Scope 2
4 Responsibilities 2
5 Safety Tests 3
6 Pre-Run Checks 4
7 Functional Test 5
8 Calibration 6
9 Training 7
10 Summary Report 8
Page 1 of 8
Operational Qualification
Objective:
To qualify the Vernier caliper manufactured by China, for use in precision measurement of external, internal,
depth and step modes measurement for quality control.
Scope:
Responsibilities:
Vendor
Purchaser/ Buyer
Page 2 of 8
Operational Qualification
Safety Test
The instrument confirms to the following standards and is supplied fully tested by the manufacturer
BS EN 61326:2006- Electrical equipment for measurement, control and laboratory use -EMC
requirements.
BS EN 61010 part 2-010:2003- Safety requirements for electrical equipment for measurement, control
and laboratory use- particular requirements for laboratory equipment for the heating of material.
The following electrical safety tests should also be carried out by a competent person after installation
✓
Earth Bonding
Insulation ✓
resistance
Pre-Run Checks
Page 3 of 8
Operational Qualification
N/A
Pre-Run Checks Ok Discrepancy
✓
All power switches easily accessible
Functional Test
Page 4 of 8
Operational Qualification
Page 5 of 8
Operational Qualification
Calibration
This equipment supplied fully calibrated by the manufacturer, using equipment traceable to national
standards. Calibration by the user directly following standard installation is not usually required
Page 6 of 8
Operational Qualification
Training
Read
Practical
Trained operators operator Authorizing Signature
Training
manual
Page 7 of 8
Operational Qualification
Model No: china
Summary Report:
Remarks: successful completion of the proceeding activities and checks indicate that this instrument is
operating successfully following delivery and installation. The instrument has passed operational qualification
procedure and may now be released for use.
Page 8 of 8