Professional Documents
Culture Documents
Henk Kormelink
Product Expert Industrial Components
IEC member IEC 121A/MT6, IEC 121B/MT2
Overview DEKRA Group
COMMITTED TO
SAFETY
Our Mission
We ensure safety
Safet
y
by fostering safety
awareness in every mind and
safety consistent behavior
by supporting excellence in the design,
configuration, operation, and maintenance by developing and advancing
of technical equipment we use whether standards and practices that
on the road, at work and at home support optimal safety performance
Requirements
End customer
Consultants Market
Product
Product National
standards codes
● Partial verification
● Short circuit and/or temperature rise
● Full product verification
● All tests according the standard
● Type testing
● Design verification
● Factory inspections
● Certification
● Product re-examinsations
● Increased competition
● Increased complexity (more automation and control)
● Increased consequences of failures
● Increased quality focus
Design verification
Latest edition of IEC 61439
Overview IEC 61439
1. Scope
2. Normative references
3. Terms and definitions
4. Symbols and abbreviations
5. Interface characteristics
6. Information
7. Service conditions
8. Constructional requirements (old: design and construction)
9. Performance requirements (old: design and construction)
10. Design verification (old: test specifications)
11. Routine verification (old: test specifications)
Special service conditions in Middle East (50-55 ̊C)
at 50 C:
Within enclosures, higher temperatures
Aging effects increase with higher ambients
Trip units:
Electronic circuits (temperature independent)
Derating required for thermal magnetic trip units
Critical temperatures of components (e.g. MCBs)
General approach:
Material limits: Absolute limit is the reference, so temperature
rise limits are reduced with 15 K
Questions?