Professional Documents
Culture Documents
SERIES
ENGINEERED FILTRATION
FLUIDPRO® SERIES
MEMBRANE AIR DRYERS
CLEAN & DRY AIR FOR COMPRESSED AIR APPLICATIONS
The purge ports on the FluidPro Membrane Air Dryers enables users to toggle purge air on or off, or even change purge
flow rates. This helps to reduce purge waste and gives the ability to use a purge gas other than what is being dehydrated.
The purge port can provide more consistent performance in cycling applications.
SPECIFICATIONS
Component Material / Value
Air Dryer Shell Material See dimensions table
Air Dryer End Cap Material See dimensions table
Air Dryer Mounting Orientation Standard Module Any
60°C (140°F) for Standard FluidPro and FluidPro Purge Port sizes 1500-3000
Maximum Operating Temperature
80°C (176°F) for FluidPro with Purge Port sizes 300-800
Maximum Operating Pressure 12.5 barg (180 psig)
Typical Pressure Drop 0.2 to 0.5 bar (3 to 7 psi)
Required Filtration (if mounted on an oil-free compressor) 0.1 micron coalescing filter
Required Filtration (if mounted on a lubricated compressor) 0.01 micron coalescing filter
CC AA DD
BB
INLET END CAP
OUTLET END CAP
Module dimensions, port sizes, port thread types, and materials of construction are same as Standard FluidPro Air Dryer.
FluidPro® 2050
1/4” purge inlet port on outlet end cap, no outlet purge port provided.
FluidPro® 3000
FluidPro® 3000 618 (24.3) 168 (6.6) 114 (4.5) 102 (4.0) 1 1 Aluminum Aluminum
with Purge Outlet Port
* All port dimensions given in inches; all ports must be same thread type on single module.
FluidPro® 300-800 Purge Port FluidPro® 3000 Purge Port (with Purge Outlet Port)
EE
FF
HH
GG
JJ
HH
JJ
FLUIDPRO WITH PURGE PORT MODULE ONLY AIR DRYER SPECS (FOR
INTEGRATION INTO EXISTING ENDCAPS, INCLUDING T-STYLE DESIGNS)
Air Dryer KK LL Thread Connection Type Shell Material KK
FluidPro 300®
248 (9.8) 60 (2.4) 2" - 11 ⁄2 NPSM
1
CPVC
FluidPro 400®
311 (12.3) 60 (2.4) 2" - 11 ⁄2 NPSM
1
CPVC
FluidPro® 600 400 (15.8) 60 (2.4) 2" - 11 1⁄2 NPSM CPVC
FluidPro 800®
527 (20.8) 60 (2.4) 2" - 11 ⁄2 NPSM
1
CPVC
LL
PERFORMANCE DATA
Inlet Conditions: @ 7 barg (100 psig) 35°C (95°F) to:
Outlet Pressure Dew Point 15°C (59°F) 3°C (37°F) -20°C (-4°F) -40°C (-40°F)
% Purge 10% 14% 21% 29%
% Water Removal 69.70% 86.53% 98.20% 99.77%
Air Dryer Purge Air Inlet Air Flow Inlet Air Flow Inlet Air Flow Inlet Air Flow
slpm (scfm) slpm (scfm) slpm (scfm) slpm (scfm) slpm (scfm)
FluidPro® 50 5 (0.2) 50 (1.8) 36 (1.3) 24 (0.8) 17 (0.6)
FluidPro® 100 10 (0.4) 100 (3.5) 71 (2.5) 47 (1.7) 34 (1.2)
FluidPro 150
®
16 (0.6) 150 (5.3) 107 (3.8) 71 (2.5) 51 (1.8)
FluidPro 200
®
19 (0.7) 200 (7.1) 142 (5.0) 95 (3.4) 69 (2.4)
FluidPro® 300* 29 (1.0) 300 (10.6) 213 (7.5) 142 (5.0) 103 (3.6)
FluidPro® 400* 38 (1.3) 400 (14.1) 284 (10.0) 189 (6.7) 137 (4.8)
FluidPro 600*
®
57 (2.0) 600 (21.2) 427 (15.1) 284 (10.0) 206 (7.3)
FluidPro® 800* 76 (2.7) 800 (28.3) 569 (20.1) 379 (13.4) 274 (9.7)
FluidPro 1050
®
103 (3.6) 1050 (37.1) 747 (26.4) 497 (17.6) 360 (12.7)
FluidPro 1500*
®
150 (5.3) 1500 (53.0) 1120 (39.6) 730 (25.8) 518 (18.3)
FluidPro® 2050* 208 (7.3) 2050 (72.4) 1530 (54.0) 980 (34.6) 710 (25.1)
FluidPro 3000*
®
300 (10.6) 3000 (106.0) 2135 (75.4) 1425 (50.3) 1025 (36.2)
* Also available in purge port configurations where purge flow orifice is not included.
ENGINEERED FILTRATION
1350 HAMMOND RD., ST. PAUL , MN 55110, USA . +651.653.2000 MAIN, +651.653.2230 FAX, EFCUSTOMERSERVICE@PENTAIR.COM
§For a detailed list of where Pentair trademarks are registered, please visit www.pentair.com/en/registrations.html. Pentair trademarks and logos are owned by
Pentair plc or its affiliates. Third party registered and unregistered trademarks and logos are the property of their respective owners.
© 2019 Pentair, All Rights Reserved.
TBFPC02_LTR JL19