Professional Documents
Culture Documents
60 Supplementary Manual
This manual explains the functions that are added in
FANTOM version 1.60. Remove License Function Added to
Read this in conjunction with the FANTOM’s owner’s manual, EXPANSION Installation Screen
reference manual (PDF), Version 1.10 Supplementary Manual,
and 1.50 Supplementary Manual. This deletes Roland Cloud license information from the
FANTOM unit and also deletes the previously-installed
content data that is authorized by that license information.
Support for Roland Cloud Sound
Content If you are installing content that is distributed from Roland Cloud,
and the message “Incorrect License! Please Remove License”
appears, use the Remove License function to delete the previously-
Content distributed from Roland Cloud is now supported. For installed license information.
details, refer to the Roland Cloud home page.
NOTE
Changes in the EXPANSION INFO When you use the Remove License function to delete the
previously-installed license information, the content data that is
authorized by the deleted license information is also deleted, and
Screen will no longer be usable.
2. Select a tone whose tone type is “SN-AP.” 2. Select a tone whose tone type is “SN-EP.”
Editing a SuperNATURAL Acoustic Piano Editing a SuperNATURAL E.Piano Tone
Tone For SuperNATURAL E.Piano tones, you can select one
instrument and edit parameters that are specific to that
For SuperNATURAL Acoustic Piano tones, you can select instrument.
one instrument and edit parameters that are specific to that
instrument.
Inst MFX
Inst MFX
Menu Explanation
2
FANTOM Version 1.60 Supplementary Manual
INST
Parameters Added
Parameter Value Explanation
System Parameter Parameters for Specifies the parameters of the selected instrument.
each instrument Refer to “SuperNATURAL Inst Parameters.”
Overall Settings (GENERAL)
MFX
Parameter Value Explanation
Parameter Value Explanation
OFF, 1–5, MAX Adjusts the brightness of all LEDs that are lit.
LED Brightness ** When the SYSTEM screen is shown, you can also change MFX Type Selects the MFX type.
(default) the value by pressing tone category buttons [1]–[6].
MFX Switch OFF, ON Switches the MFX on/off.
If this is “ON,” the ZONE INT/EXT buttons of zones
Zone Sw OFF, ON Adjusts the amount of chorus.
whose sound engine is heard when you play the MFX Chorus Send
Indicator (default) 0–127 If you don’t want to add the chorus effect,
keyboard will blink. Level
set it to 0.
SLOW,
Selects the amount by which the value changes Adjusts the amount of reverb.
Encoder Speed NORMAL, MFX Reverb Send
when you rapidly turn a FUNCTION knob [E1]–[E6]. 0–127 If you don’t want to add the reverb effect,
FAST (default) Level
set it to 0.
3
FANTOM Version 1.60 Supplementary Manual
Utility Functions Added 9. Touch the box at the left of each scene that
you want to import, adding a check mark.
Menu Explanation
Importing Scene Data (IMPORT SCENE) [E1] knob Scrolls the cursor up or down.
[E2] CLEAR ALL Clears all check marks.
Here’s how to import FANTOM sound data (scenes) from a
USB flash drive. [E3] SELECT ALL Adds a check mark to all scenes.
[E6] NEXT Proceeds to the next step.
MEMO
Adds a check mark to multiple scenes in a single
The data that can be imported is the scene data that is exported by Hold down the [SHIFT] action, starting from the tone at the cursor location
the EXPORT SCENE function, but scenes can also be imported from a button and touch a
check box to the tone that you touched while holding down the
backup file created by the BACKUP function. [SHIFT] button.
4. Touch <UTILITY>.
The UTILITY screen appears.
5. Touch <IMPORT>.
6. Touch <IMPORT SCENE>.
The folders and files on the USB flash drive are shown. 11. Touch the box at the left of the import-
destination scene to add a check mark.
NOTE
The scene in the selected import-destination is overwritten.
By default, check boxes are automatically selected so that INITIAL
SCENE is the import-destination.
4
FANTOM Version 1.60 Supplementary Manual
Exporting Scene Data (EXPORT SCENE) 8. Use the [E1] knob to select the save-destination
folder.
Here’s how to export FANTOM sound data (scenes) to a USB
flash drive. 9. If you want to edit the name of the file that is
MEMO saved, select [E1] RENAME and edit the name.
55Data for the tones and drums used in the exported scenes is also Enter a name as described in the explanation of the RENAME
exported together. screen.
When you have finished editing the name, select [E6] OK to
1. Insert the USB flash drive into the FANTOM’s close the window.
USB MEMORY port.
10. Select [E6] EXECUTE.
2. Press the [MENU] button. A confirmation message appears.
The MENU screen appears. If you decide to cancel, choose [E6] CANCEL.
3. Touch <UTILITY>. 11. Select [E5] OK.
The UTILITY screen appears. The export is executed, and you return to the EXPORT MENU
screen.
4. Touch <EXPORT>. The file is saved in the location that you specified in step 8.
5. Touch <EXPORT SCENE>.
The EXPORT SCENE(SELECT SOURCE) screen appears.
PANIC Function Added
Number marked / Number of items This transmits a MIDI All Note Off message to all zones. It also
stops all samples that are being played by the sample pads.
*1 The lower line of the message screen shows the number that is
lacking for each tone type. For example, “Z-Core:10” indicates that
Menu Explanation ten Z-Core type tones are lacking, so you should use Tone Initialize to
allocate ten free Z-Core type tones.
[E1] knob Scrolls the screen up/down to select the save-destination.
[E2] RENAME Edits the name of the file that is exported.
[E6] EXECUTE Executes the export.