Type of Line: FROM: Diesel Tank TO: Dispenser Sump
Pipe type: Lined Thin wall fill / vent
Select Primary Pipe Size (highlight or circle relevant column) UPP Ø mm 32 mm 50 mm 63 mm 90 mm 110 mm 110 mm Fill 160 mm Wall Thickness 3.0 mm 4.6 mm 4.7 mm 6.7 mm 8.1 mm 6.6 mm 11.8 mm Pressure Rating PN 10 PN 10 PN 10 PN 10 PN 10 PN 6 PN 10
Conformance Control and Visual Inspection
Number of compression joints in pipe line: 9 Notes: Number of welded joints in pipe line: 25 Notes: Welding times marked on all joints? Yes Notes: Scraping marks? Yes Notes: Joints square? 7 Notes: Welding pins extended? Yes Notes: Pipe routing / separations? Yes Notes: Minimum fall-back correct? Notes:
Tightness Testing of Primary Containment
PRESSURE TEST Pressure Test 3.5 bar for up to 63 mm Ø. For larger than 63 mm, use desired working pressure. Test Medium Air Inert Gas (Nitrogen) Test time Start Time: End Time: PASS (at least 90 minutes) Start temperature: °C End Temperature: °C FAIL Pressure drop m bar over test period
Certification Sign Off
The above described pipe run has been checked for correct installation visually and by means of an integrity test. It has been found to be installed in accordance with the UPP Systems installation guidelines and has been certified by:
The information given above is true and correct.
Signed by: Date: (day/month/year)
Franklin Fueling Systems • 3760 Marsh Rd. • Madison, WI 53718 USA
Select Primary Pipe Size (highlight or circle relevant column) UPP Ø mm 32 mm 50 mm 63 mm 90 mm 110 mm 110 mm Fill 160 mm Wall Thickness 3.0 mm 4.6 mm 4.7 mm 6.7 mm 8.1 mm 6.6 mm 11.8 mm Pressure Rating PN 10 PN 10 PN 10 PN 10 PN 10 PN 6 PN 10
Conformance Control and Visual Inspection
Number of compression joints in pipe line: Notes: Number of welded joints in pipe line: Notes: Welding times marked on all joints? Notes: Scraping marks? Notes: Joints square? Notes: Welding pins extended? Notes: Pipe routing / separations? Notes: Minimum fall-back correct? Notes:
Tightness Testing of Primary Containment
PRESSURE TEST Pressure Test 3.5 bar for up to 63 mm Ø. For larger than 63 mm, use desired working pressure. Test Medium Air Inert Gas (Nitrogen) Test time Start Time: End Time: PASS (at least 90 minutes) Start temperature: °C End Temperature: °C FAIL Pressure drop m bar over test period
Certification Sign Off
The above described pipe run has been checked for correct installation visually and by means of an integrity test. It has been found to be installed in accordance with the UPP Systems installation guidelines and has been certified by:
The information given above is true and correct.
Signed by: Date: (day/month/year)
Franklin Fueling Systems • 3760 Marsh Rd. • Madison, WI 53718 USA
Select Primary Pipe Size (highlight or circle relevant column) UPP Ø mm 32 mm 50 mm 63 mm 90 mm 110 mm 110 mm Fill 160 mm Wall Thickness 3.0 mm 4.6 mm 4.7 mm 6.7 mm 8.1 mm 6.6 mm 11.8 mm Pressure Rating PN 10 PN 10 PN 10 PN 10 PN 10 PN 6 PN 10
Conformance Control and Visual Inspection
Number of compression joints in pipe line: Notes: Number of welded joints in pipe line: Notes: Welding times marked on all joints? Notes: Scraping marks? Notes: Joints square? Notes: Welding pins extended? Notes: Pipe routing / separations? Notes: Minimum fall-back correct? Notes:
Tightness Testing of Primary Containment
PRESSURE TEST Pressure Test 3.5 bar for up to 63 mm Ø. For larger than 63 mm, use desired working pressure. Test Medium Air Inert Gas (Nitrogen) Test time Start Time: End Time: PASS (at least 90 minutes) Start temperature: °C End Temperature: °C FAIL Pressure drop m bar over test period
Certification Sign Off
The above described pipe run has been checked for correct installation visually and by means of an integrity test. It has been found to be installed in accordance with the UPP Systems installation guidelines and has been certified by:
The information given above is true and correct.
Signed by: Date: (day/month/year)
Franklin Fueling Systems • 3760 Marsh Rd. • Madison, WI 53718 USA