Professional Documents
Culture Documents
Bachelor of Technology
Mechanical Engineering
Candidates must satisfy the following requirements to be conferred the degree of BTech (Mechanical
Engineering):
Degree Requirements MC
(1) University Level Requirement (General Education) 20
Culture and Connections (module with prefix GEC) 4
Critique and Expression (module with prefix GEX) 4
Singapore Studies (module with prefix GES) 4
Data Literacy (module with prefix GEA) 4
Digital Literacy (module with prefix GEI) 4
Communities and Engagement (module with prefix GEN)* 4
(2) Programme Requirement 113
Advanced Placement Credits given to holders of diploma or higher 20
(a) Faculty Requirement 8
TTG2415 Ethics in Engineering 4
TTG2901 Communications for Engineering Professionals 4
(b) Major Requirements: Essential Modules 65
TTG1401 Engineering Mathematics I 4
TME2401 Engineering Mathematics II 4
TME2114 Mechanics of Materials II 3
TME2121 Engineering Thermodynamics 4
TME2134 Fluid Mechanics I 4
TME2135 Fluid Mechanics II 4
TME2142 Feedback Control Systems 4
TME2143 Sensors and Actuators 4
TME2151 Principles of Mechanical Engineering Materials 4
TME2115 Mechanics of Machines 4
TME3122 Heat Transfer 4
TME2162 Manufacturing Processes 4
TME2101 Fundamentals of Mechanical Design 4
TME3101 Mechanical Systems Design 6^
TME4102 BTech Dissertation 8
(d) Major Requirements: Technical Elective Modules 20
Bachelor of Technology (Mechanical Engineering) Degree Requirements
Notes:
+ A module with module code TMExxxx is equivalent to the module MExxxx offered to the full-time students.
Subject to the approval from SCALE and Department of Mechanical Engineering, a student may select a full-
time equivalent module in place of any TMExxxx module.
# Subject to the approval from the Dean of SCALE and College of Design and Engineering, a student may select
up to two level 3 or higher modules from other programmes within the College of Design and Engineering.
^ One-semester 6-MC module involving a design-and-built project.
* Students to fulfil an additional 4MCs of Unrestricted Elective requirements in place of Communities and
Engagement (GEN) pillar.
**TME3162 is changed to TME2162
***TME3112 is changed to TME2115
Candidates must satisfy the following requirements to be conferred the degree of BTech (Mechanical
Engineering):
Degree Requirements MC
(1) University Level Requirement (General Education) 20
Culture and Connections (module with prefix GEC) 4
Critique and Expression (module with prefix GEX) 4
Singapore Studies (module with prefix GES) 4
Data Literacy (module with prefix GEA) 4
Digital Literacy (module with prefix GEI) 4
Communities and Engagement (module with prefix GEN)* 4
(2) Programme Requirement 109
Advanced Placement Credits given to holders of diploma or higher 20
(c) Faculty Requirement 4
TTG2415 Ethics in Engineering 4
(d) Major Requirements: Essential Modules 65
TTG1401 Engineering Mathematics I 4
TME2401 Engineering Mathematics II 4
TME2114 Mechanics of Materials II 3
TME2121 Engineering Thermodynamics 4
TME2134 Fluid Mechanics I 4
TME2135 Fluid Mechanics II 4
TME2142 Feedback Control Systems 4
TME2143 Sensors and Actuators 4
TME2151 Principles of Mechanical Engineering Materials 4
TME2115 Mechanics of Machines 4
TME3122 Heat Transfer 4
TME2162 Manufacturing Processes 4
TME2101 Fundamentals of Mechanical Design 4
TME3101 Mechanical Systems Design 6^
TME4102 BTech Dissertation 8
(d) Major Requirements: Technical Elective Modules 20
Select from modules listed in Table 2 20
Bachelor of Technology (Mechanical Engineering) Degree Requirements
Degree Requirements MC
(3) Unrestricted Elective Requirements 32
Advanced Placement Credits given to holders of diploma or higher 20
Unrestricted Elective Modules* 12
Total 161
Notes:
+ A module with module code TMExxxx is equivalent to the module MExxxx offered to the full-time students.
Subject to the approval from SCALE and Department of Mechanical Engineering, a student may select a full-
time equivalent module in place of any TMExxxx module.
# Subject to the approval from the Dean of SCALE and College of Design and Engineering, a student may select
up to two level 3 or higher modules from other programmes within the College of Design and Engineering.
^ One-semester 6-MC module involving a design-and-built project.
* Students to fulfil an additional 4MCs of Unrestricted Elective requirements in place of Communities and
Engagement (GEN) pillar.
**TME3162 is changed to TME2162
***TME3112 is changed to TME2115
Candidates must satisfy the following requirements to be conferred the degree of BTech (Mechanical
Engineering):
Degree Requirements MC
(1) University Level Requirement (General Education) 20
Human Cultures (module with prefix GEH) 4
Quantitative Reasoning (module with prefix GER) 4
Singapore Studies (module with prefix GES) 4
Thinking and Expression (module with prefix GET) 4
Asking Questions (module with prefix GEQ) 4
(2) Programme Requirement 113
Advanced Placement Credits given to holders of diploma or higher 20
(a) Faculty Requirement 4
TTG2415 Ethics in Engineering 4
(b) Major Requirements: Essential Modules 65
TTG1401 Engineering Mathematics I 4
TME2401 Engineering Mathematics II 4
TME2114 Mechanics of Materials II 3
TME2121 Engineering Thermodynamics 4
TME2134 Fluid Mechanics I 4
TME2135 Fluid Mechanics II 4
TME2142 Feedback Control Systems 4
TME2143 Sensors and Actuators 4
TME2151 Principles of Mechanical Engineering Materials 4
TME2115 Mechanics of Machines 4
TME3122 Heat Transfer 4
TME2162 Manufacturing Processes 4
TME2101 Fundamentals of Mechanical Design 4
TME3101 Mechanical Systems Design 6^
TME4102 BTech Dissertation 8
(c) Major Requirements: Technical Elective Modules 24
Select from modules listed in Table 2 24
Bachelor of Technology (Mechanical Engineering) Degree Requirements
Notes:
+ A module with module code TMExxxx is equivalent to the module MExxxx offered to the full-time
students. Subject to the approval from SCALE and Department of Mechanical Engineering, a student
may select a full-time equivalent module in place of any TMExxxx module.
# Subject to the approval from the Dean of SCALE and College of Design and Engineering, a student
may select up to two level 3 or higher modules from other programmes within the College of Design
and Engineering.
^ One-semester 6-MC module involving a design-and-built project.
**TME3162 is changed to TME2162
***TME3112 is changed to TME2115
Candidates must satisfy the following requirements to be conferred the degree of BTech (Mechanical
Engineering):
• Complete a minimum of 161 MCs with a minimum CAP of 2.00.
(Note: 20 MCs of programme requirements and 20 MCs of unrestricted elective requirements will
normally be given as Advanced Placement Credits (APCs) to holders of relevant diploma or higher
qualifications. Students will be required to complete a minimum of 121 MCs of modules as listed in
Table 1 below).
• Comply with the requirement that the limit on the number of Level-1000 modules to be counted
towards fulfilment of graduation requirements being 60 MCs (including 20 MCs of programme
requirements normally be given as APCs to holders of relevant diploma or higher qualifications).
• Satisfy any other additional requirements that may be prescribed by SCALE, the College of Design
and Engineering or the University.
Total 161
Notes:
+ A module with module code MExxxxE is equivalent to the module MExxxx offered to the full-time
students. Subject to the approval from SCALE and Department of Mechanical Engineering, a student
may select a full-time equivalent module in place of any MExxxxE module.
# Subject to the approval from the Dean of SCALE and College of Design and Engineering, a student
may select up to two level 3 or higher modules from other programmes within the College of Design
and Engineering.
^ One-semester 6-MC module involving a design-and-built project.
% To fulfil the GE requirements, students admitted in AY2015/16 will be required to read one module
each from the four pillars (Human Cultures (GEH), Quantitative Reasoning (GER), Singapore Studies
(GES), and Thinking and Expression (GET) and an additional module from one of these pillars: GEH,
GES or GET.
**ME3162E is changed to ME2162E
***ME3112E is changed to ME2115E