Professional Documents
Culture Documents
• red display of -19999…99999 digits (optional green, orange, blue or tricolour display)
• Schmitt-Trigger-Input
• digital frequency filter for contact bounce suppression and interference suppression
• zero key for actuation of tara-function /hold-function, display change, setpoint setting, alarm actuator
• mathematical functions like reciprocal value, square root, squaring and rounding
• constant setting / respectively setpoint setting
• sliding averaging
• optional: galv. isolated digital input for the triggering of Tara, Hold, display change
Advice: Using Namur sensors with a nominal voltage of approx. 8 V, a sensor supply of 12 VDC needs to be provided.
M 2- 1 F R 5 B. 0 3 0 7. 5 7 0 C D
M 2- 1 F R 5 B. 0 0 0 7. 6 7 0 C D EUR
2 2 relay outputs 33,00
1 Without keypad, operation via PC-Software PM-TOOL 10,00
X Analog output 0/4-20 mA, 0-10 VDC 120,00
2 Sensor supply 10 VDC / 20 mA incl. digital input 55,00
3 Sensor supply 24 VDC / 50 mA incl. digital input 55,00
6 Sensor supply 12 VDC / 50 mA incl. digital input 55,00
K Pulse output max. 10 kHz, incl. sensor supply / incl. digital input 65,00
B Blue 44,00
G Green 10,00
Y Orange 4,00
T Tricolour (Red-Green-Orange)* 30,00
* 230 VAC voltage supply is not available with relay outputs.
Please state physical unit on demand, e.g. U/min.
PC based configuration software PM-Tool for devices without keypad, PM-TOOL-MUSB4 89,00
for a simple adjustment of standard devices, incl. CD & USB-adapter.
Programming happens via an interface on the back.
Measuring input Signal impulse input, TTL, Namur, 3-wire initiator PNP/NPN
Input resistance Ri at 24 V / 4 kΩ
HTL level >15 V / < 4 V
TTL level >4.6 V / <1.9 V
Input frequency 0.01 Hz…999.99 kHz,
0.01 Hz…9.9999 kHz with rev counter,
0…2.5000 kHz with position recording
Measuring fault 0.05% of measuring range, ± 1 digit
Digital input Input galv. isolated <2.4 OFF; >10 V ON; max. 30 VDC, Ri at ~ 5 kΩ
Housing:
3,0
M2
Se
alin
g
48,0
l
ina
term
,0 ion
89 ect
conn
l.
inc
Gap for physical dimension
pth
n de
atio
nstall
I
M 2- 1 F R 5 B. 0 3 0 7. 6 7 0 C D