Professional Documents
Culture Documents
Aluminium Melting Crucible Furnace
Aluminium Melting Crucible Furnace
Ceramics &
General Industries
Manufacturing of All Type Industrial Frunace ‘ Furnace Allied Parts ,
Refractory Material & Service Provider for Industrial Fabrication Work.
Regd. Oficee :- Refractory mfg. Unit: -
Plot No: 02, Jeevan Nagar-Ii, Near area office ecl mugma, Near bye
Pratap Garh Disposal, pass road , p.o. Mugma-
Chandela Chowk, Ballabhgarh- 828204,dist. Dhanbad, Jharkhand.
121004, Faridabad Email:- rkceramics2013@gmail.com
Phone No. 09868031882 , rkindustries2013@yahoo.com
07827243850
Company Profile
We introduced ourselves as a well established and experienced engineering company engaged consultancy,
manufacturing, supply, erection & commissioning of all types of Industrial Furnaces, Combustion Equipment ,
boilers , pressure vessels , Air Receivers , Piping , Nitrogen Gas Plane etc.
Our products are well accepted in India and abroad for the last over 6 years under the name and style of“M/S
R.K. CERAMICS & GENERAL INDUSTRIES” in Faridabad. We have not only the practical and technical
manufacturing skill but also on the job experience about our products. We have a team of Highly Experience &
technically qualified Personals in the above Fields. We designs pusher type billet Re-Heating Furnaces and the
boilers, pressure vessels, Air Receivers , Piping , Nitrogen Gas Plane etc and the Related allied Products with
latest technology, keeping in mind to ensure qualitative products with optimum advantages to maintain
the maximum output at the lowest running cost and as such, our products are well accepted by our clients.
The Re- Heating furnaces and boilers, pressure vessels supplied by us in India and aboard are successfully
giving the Mode rate performance with the entire satisfaction & result oriented. We ensure proper after sale
services in case of any need to the entire satisfaction of our clients.
We also deal in supply of all types of refractory, castable and non-fired items of branded names An undertake the
fabrication of vessels , heavy structure , chimneys etc in MILD STEEL and STAINLESS STEEL of all
grades.We also take fabrication work under THIRD PARTY inspection . We follow all inspection procedures, use
approved welders for the job.
We undertake the projects on turnkey Basis also, from layout planning to successful trial run of all above mention
items with full responsibility and guarantee of attaining the optimum projected targets. We have a competent team
consisting of qualified and experienced technical staff who can undertake complete design, manufacturing,
supervision of erection & commissioning of any size of above items, ensuring the specific targets and time
management. The Managing Director of the company “Mr. RAVI GUPTA” himself i a technocrat having 15 years
of experience in the line of activity, and personally undertakes the design and implementation of the project within
the time frame.
Should you need any further query or clarification about our products, we shall feel pleasure in attending to thesame.
Kindly apprise us about your any requirement and we assure you of our qualitative best and prompt services at all
times.
THANKING YOU AND ASSURING YOU OF OUR BEST SERVICES AT ALL TIME, WE REMAIN
OUR PRODUCTS RANGE CONSISTS OF:-
1. Industrial Furnaces
i) Oil/Gas and pulverized coal fired Billet Re-heating Furnaces of various capacities
ii) All types of Aluminum melting Furnaces
iii) All types of copper melting Furnaces including Hydraulic tilting crucible type
iv) Ladle Pre-heating systems(Vertical/Horizontal)
v) Heat Treatment Furnaces including Quenching systems
vi) Heavy duty coal pulverizer units for billet re-heating furnaces and aluminum dross
vii) Gasified Plants
viii) Conveyor for material Handling systems
ix) Pollution control systems
x) All types of Fabrication work relating thereto including Chimneys
xi) Modifications/re-modeling and repairs with refractory linings of all types of existing
and newindustrial furnaces
2. Combustion Equipments
i) Heating & Pumping units Model Simplex I & II and Duplex I &II
ii) All types of Blowers
iii) Waste heat recovery recuperator of various capacities
iv) All types of Burners (coal fired and dual fired)
Our Products Are Also Consisting Of: -
a.) All type of refractories such as Fire Bricks STD, IS-6, IS-8, End Arch & Side Arch Bricks, Chrome
Magnesite Bricks, Lock Bricks, Burner Blocks, Skew Blocks, Hanger & Shoulder Bricks etc. within
High Alumina ranging from 30% to 90%, Insulation Bricks, Fire Cement, Whyte Heat ‘K’ and ‘A’ ,
Fire Clays, Fiber Blankets etc and lining jobs of refractory.
b.) All type of Engineering & Fabrication of Industrial Furnaces, Heat Resistance Doors, Oil Feeding
Pumps, Micro Valves, Oil, Air & Gas Pipe Lines, all types and sizes of Burners, Blowers, Heating
and Pumping Units, Boiler Nozzles, S.S. Studs with Washers etc.
c.) All the C.I. Castings required in Industrial Furnace and Boilers.
Billet Re- Heating Furnace
1. Minimum burning losses
2. Coal and oil & gas fired (Dual fired).
3. Available in various capacities and specification.
4. Low fuel consumption.
5. Re-heating temperature: 1150 to1250OC.
6. For charge with higher thickness burners are
provided below & above the skids
7. Highly fuel efficient operation
Features:
A lead production system based on this technology has certain distinct characteristics such as:
Mechanical/Hydraulic
Pusher
We manufacture and supply a durable range of
mechanical and hydraulic pushers to our clients
which are ideal for pushing the raw material
into furnace. Designed with the aid of latest
technology, these mechanical driven pushers
ensure high capacity to push the material.
These are well accepted by our clients for their
energy efficiency and negligible maintenance cost.
Billet Re Heating
Furnace Injector
Our extensive domain expertise assists us in
manufacturing a wide range of mechanical
Injector. These are available in different
specifications and dimensions, which can
also be customized as per the requirement of
our customers. Moreover, our range is
offered at competitive prices to the clients.
Boiler Nozzle
Pioneers in the industry, we offer
Hysil Block
The hysil blocks are made by the professionals of
our associates using calcium silicate. These products
are widely used to insulate high-temperature applications
like boilers, ducts, steam pipe lines and furnaces.
These are with high compressive strength and low
shrinkage at high temperature. These are commonly
used in Iron & steel- Reheating and wThe hysil blocks
are made by the professionals of our associates using
calcium silicate. These products are widely used to
insulate high-temperature applications like boilers,
ducts, steam pipe lines and furnaces. These are with
high compressive strength and low shrinkage at high
temperature. These are commonly used in Iron
& steel- Reheating Furnace.
Ceramics Fiber Blanket
Availability (for all grades)
Burner Block
Asbestos Millboard
We bring forward to our clients a wide of asbestos
millboard. This versatile thermal insulation and
heat resistant material is developed in sheet form.
Supercera anchored modules
and veneering modules
Anchored Modules are made from folds of Supercera
Ceramic fibre - the only superspun double-needled fibre
in the country. The module is held in compression by
removable strapping. Each module has an integral
anchoring system- the result of continuous R & D and
advanced design.
We supply ceramic fiber modules of different sizes as per
requirements which are used in re-heating furnaces, ladle
pre-heaters etc.
Whytheat –K& A
Accoset-50
Address
R.K.Ceramics & General Industries
Plot no.2, jivan nagar part-ii,
Chandela chowk, near
Pratapgarh disposal,
ballabhgarh, faridabad-121005
Contact Number
Prop. Mr. Ravi Gupta
09868031882
07827243850
Email
rkceramics2013@gmail.com
rkindustries2013@gmail.com
Website;- www.rkceramicsandgeneralindustries.com
Thank You
For
Watching