Professional Documents
Culture Documents
How it works
Graco’s InvisiPac uses an integrated vacuum system to
feed adhesive to an in-line melter. An ultrasonic sensor
monitors adhesive in the chamber, and additional
adhesive is automatically added as needed based on
the demand of your application. With its efficient heat
transfer design, the InvisiPac System has adhesive
throughput capability equivalent to or better than many
hot melt tank systems. The result? You get a continuous
flow of adhesive during production that significantly
reduces the time adhesive sits at temperature. Less time
at high temperature means less char, less maintenance
and more uptime.
2
2
Optional Light Tower Filter
• Indicates system status at a glance • Large surface area for months
of maintenance free operation
InvisiPac GS35
• Patent-pending module
filter design provides
plug-free operation
Visit www.invisipac.com for more information on the InvisiPac HM25 and HM50 3
Tank-free design: setting a new packaging industry standard
4
Boost production uptime
Solenoid
• Graco-engineered for optimal control
• Designed to withstand high speed,
high temperature operation
Safety
• Third-party certification to UL/CSA standards
Module Filter
• Design protects ball and seat from debris and char
• Eliminates nozzle plugging when used
with InvisiPac System
Free-Flow Path
Manifold • Designed to eliminate dead zones
where char will build up
• Manifold filter traps debris and char so it’s
removed when you replace the filter
• Manifold filter is included in a heated zone,
eliminating cold spots and ensuring
consistent adhesive application
• Reaches operating temperature in less
than 10 minutes
Visit www.invisipac.com for more information on the InvisiPac HM25 and HM50 5
Superior tracking and monitoring capabilities
Y
ER DA
E USAGE P
SIV
ADHE
1
Superior heated hose design
Graco’s char-resistant hose is designed to reduce 3
adhesive char buildup, resulting in more uptime and
lower maintenance costs. An additional silicone layer
promotes even heating, eliminating hot and cold spots
that cause char and skin formation
2
• Available in many lengths for easy installation 1 Built in over-temperature safety interlock
6
Technical specifications
* Melt rates typical for packaging grade adhesives. Actual melt rates may vary due to chemistry and other factors.
** From 21°C to 177°C (70°F to 350°F), dependent upon power supply, machine configuration and glue type.
For detailed dimensions and configurations, see instruction manuals 3A2347, 333347 and 3A2805 available on www.graco.com.
7
ABOUT GRACO
Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products
move, measure, control, dispense and apply a wide range of fluids and viscous materials used
in vehicle lubrication, commercial and industrial settings.
The company’s success is based on its unwavering commitment to technical excellence, world-class
manufacturing and unparalleled customer service. Working closely with qualified distributors, Graco
offers systems, products and technology that set the quality standard in a wide range of fluid handling
solutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication,
and dispensing sealants and adhesives, along with power application equipment for the contractor
industry. Graco’s ongoing investment in fluid management and control will continue to provide
innovative solutions to a diverse global market.
© 2013-2018 Graco Inc. 348801 Rev. D 9/18 All written and visual data contained in this document are based on the latest product information available
at the time of publication. Graco reserves the right to make changes at any time without notice. All other brand names or marks are used for identification
purposes and are trademarks of their respective owners.