Professional Documents
Culture Documents
2016-2017
Sl.No. Groups BOM PROJECT TITLE Cate- Plant/ Number Spokes- Date of Date of
gory Unit person Start Compl.
1. SP, MCL 1 Development of nano structured BR RDCIS 01:78:18 Dr Santosh Jan’15 Jun’17
FR, SR, steels Kumar
M&SL, (Champion)
MT&CE
2. SM, 2 Production of special quality slabs PPI RSP 02:78:19 Dr R Datta Apr’15 Jan’17
Casting, for export and value added plates (Co-
FR, SP, through new Plate Mill ordinator)
AEC
3. Casting, 3 Designing of heat transfer SID RDCIS 02:28:22 Dr R Datta Apr’16 Jul’17
D&E, laboratory to simulate secondary (Co-
M&SL cooling of continuous caster ordinator)
4. CCT, CCL 4 Enhancing the Crude Benzol PPI BSP 50:03:62 PK Jha Apr’16 Jun’17
yield
5. CCT, CCL 5 Improvement in coke quality PPI DSP 50:70:59 PK Pankaj Jun’15 May’16
through process optimization of
coke oven
6. CCT, CCL 6 Improvement in coke screen PPI RSP 50:70:61 R Srivastava Apr’16 Jul’17
efficiency and performance by
replacing metal deck with rubber
deck at COB # 6
7. CCL, CCT 7 Coke oven battery health PPI RSP 51:70:60 B Apr’16 Mar’17
monitoring through cross-leakage Chakraborty
determination
8. CCL, CCT 8 Characterization of new TS CCSO 51:01:51 KN Ghosh Sep’15 Aug’16
indigenous coal and creation of a
coal testing laboratory at CCSO,
Dhanbad
9. CCL, CCT 9 Development of procedure for SID RDCIS 51:01:50 Ms N Jul’15 Jun’16
Pilot Oven carbonisation test for Chakraborty
producing coke having properties
similar to that of commercial
ovens
10. CCL, CCT 10 Evaluation of new imported SID RDCIS 51:01:52 Dr BK Sahoo Apr’16 Mar’17
coking coals through Pilot
Carbonization tests
11. CCL, CCT 11 To study the effect of SID RDCIS 51:01:53 B Ghosh Apr’16 May’17
microlithotype distribution on coke
quality
12. TE, EC 12 Improvement in ladle heating PPI RSP 17:74:23 INP Gupta Jan’15 Jan’17
system at SMS-II
13. TE, EC, 13 Simulation of mixed-gas fired flat- BR RDCIS 17:74:28 M Sen Apr’16 Mar’18
LS, D&E, flame burner
Casting
14. TE, EC, 14 Combustion simulation of existing TS RDCIS 17:74:27 M Sen Apr’16 Mar’17
Casting side burner of sinter machine of
IISCO Steel Plant and work out
improved burner design.
15. EC, Env 15 Assessment of bio-sequestration TS RSP 81:76:08 P Banerjee Apr’13 Sep’19
potential and carbon-
sequestration through
afforestation
I
Sl.No. Groups BOM PROJECT TITLE Cate- Plant/ Number Spokes- Date of Date of
gory Unit person Start Compl.
16. Env 16 Improving suspension-dissolution PPI DSP 65:76:13 S Apr’15 Jan’17
efficiency of scrubber-clarifier- Mitramazum
thickener circuit at BOF dar
17. Env, P&C 17 Feasibility study of BOF slag by SID BSL 65:56:44 Dr SN Apr’15 Jan’17
steam maturing for its use in Tiwary
cement concrete
18. Env 18 Investigative study of cyanide and SID ISP 65:76:15 SN Singh Apr’16 Nov’16
ammonia in effluent of BF # 5
GCP
19. Env, D&E, 19 Exploring use of air cooled BF SID RDCIS 65:76:11 GD Jan’15 Jan’17
C&M slag in construction of rigid Maheshwari
concrete pavement in RDCIS
complex
20. Env 20 Development of a coupled SID RDCIS 65:76:16 S Apr’16 Dec’17
abiotic-biotic process for Mitramazum
improved treatment and dar
recyclability of organic wastewater
generated in an Integrated Steel
Plant
21. Agglmn 21 Improvement in performance of PPI BSP 52:73:23 A Das Apr’16 Mar’17
M/c # 2 & 3 of SP-2, BSP through
improvement of under-grate
suction
22. Agglmn, 22 Optimisation of sintering air flow PPI BSL 52:73:22 Subhra Apr’16 Mar’17
ME and process parameters at Sinter Dhara
Plant
23. ME, 23 Process up-gradation in slime PPI BSP 12:05:50 V Dayal Jul’15 Dec’16
MT&CE, beneficiation unit at CSW Plant,
Agglmn Dalli Mines
24. ME, 24 Optimization of classifier PPI RMD 12:05:52 R Ram Apr’16 Mar’17
MT&CE operation to reduce gangue
content in ore fines at washing
plant, MIOM
25. ME, 25 Study of major factors effecting BR RDCIS 12:73:21 S Acharyya Oct’15 Mar’18
MT&CE, quality of iron ore sinter and
CCL, develop ways to improve it in
Agglmn context of SAIL operation
26. BFT, 26 Introduction of hot metal PPI DSP 13:67:84 BK Das Jun’15 Dec’16
AAPC temperature measurement
system in Cast House of
BF# 3
27. BFT, Ref 27 Introduction of coated tuyere in PPI RSP 13:67:86 Raju Kumar Apr’16 Sep’17
BF # 4 Singh
28. BFT, 28 Characterization of high TS BSP 13:67:85 VK Jha Apr’16 Mar’17
Agglomn temperature properties of ferrous
burden being used in blast
furnaces
29. BFT, TE 29 Extending campaign life TS DSP 13:67:87 Sandeep Apr’16 Dec’16
of BF # 4 Kumar
II
Sl.No. Groups BOM PROJECT TITLE Cate- Plant/ Number Spokes- Date of Date of
gory Unit person Start Compl.
31. SM, 31 Development of low cost flux PPI BSP 28:15:38 Somnath Apr’15 Jun’16
Casting practice and reduction in pipe Kumar
defect at SMS-I
32. SM 32 Use of alternate coolant in BOF at PPI DSP 28:15:40 A Chatterjee Jun’16 May’17
SMS
33. SM, 33 Sequence casting & quality PPI DSP 02:29:71 Dr R Datta Apr’16 Mar’17
Casting, improvement of Wheel steel (Co-
through Bloom cum Round caster ordinator)
34. SM, 34 Development of model for steel SID RDCIS 28:15:41 Vikash Apr’16 Mar’17
Casting superheat control Kumar
35. Casting, 35 Improvement in cast quality of PPI RSP 26:29:70 K Patwari Apr’16 Jun’17
SM, ML slabs from Caster #1 & 2 of SMS-
II
36. Casting 36 Introduction of mould coating in PPI BSL 26:29:68 A Paul Apr’15 Mar’17
caster for improving mould life
37. Casting 37 Development of mathematical SID RDCIS 26:26:30 A Gupta Apr’16 Sep’17
model for study of fluid flow
characteristics in Beam Blank
Mould
38. M&SL, 38 Creation of databank on melting SID RDCIS 53:53:42 Jwala Apr’15 Jun’16
SM, CCL, behavior of various steelmaking Prasad
MT&CE slags of SAIL Plants
39. M&SL, 39 Study the effect of CaO, FeO, SID RDCIS 53:18:06 Ms Sujata Apr’16 Dec’17
SM, MgO, MnO, SiO2 and Al2O3 Devi
MT&CE contents of slag on
dephosphorisation of steel
40. Ref 40 Improvement in performance of PPI BSP 15:75:17 MK Kujur Apr’15 Dec’16
RHF by enhancing life of skid pipe
insulation in R&S Mill
41. Ref, SM 41 Improvement in steel ladle life PPI DSP 15:75:18 P Barua/ KK Apr’15 Mar’17
Keshari
42. Ref 42 Development of alternate quality PPI DSP 15:79:05 I Roy Jul’16 Dec’17
refractory for improvement in
performance of preheating zone
hearth of reheating furnace of
Merchant Mill
43. Ref 43 Improvement in refractory lining PPI ASP 15:75:19 D Halder Apr’15 Dec’16
performance of EAF roof
44. Ref, LS 44 Development of refractory plastic PD SRU 15:79:02 Ms A Apr’15 Sep’16
mass for RHF Bhattacharyy
a
45. Ref 45 Development of carbon PD SRU 15:79:06 K Kumar Apr’16 Sep’17
containing castables by using
nano carbon and water wettable
graphite
46. Ref, LS 46 Development of tundish spray PD SRCL 15:79:01 A Rauf Apr’15 Sep’16
mass
47. Ref 47 Development of MgAl2O4 solid BR RDCIS 15:79:04 Dr SK Nandy Aug’15 Dec’17
solution layer on MgO grains
through addition of nano ceramic
components for application as
superior refractory materials
III
Sl.No. Groups BOM PROJECT TITLE Cate- Plant/ Number Spokes- Date of Date of
gory Unit person Start Compl.
48. Ref 48 Application of Nano-Technology BR RDCIS 15:79:07 Ms A May’16 Apr’19
for improvement of sintering & Bhattacharyy
firing process in manufacturing of a
refractories to reduce energy cost
49. FR 49 Reduction of cobble generation at PPI RSP 20:77:21 S Rath Apr’16 Dec’17
HSM
50. FR 50 Improvement in surface quality of PPI RSP 20:77:22 SK Thakur Apr’16 Oct’17
CR coils at CRM
51. FR 51 Improvement in surface quality of PPI BSL 20:77:20 P Pathak Apr’16 Sep’17
CR Coils at CRM-III
52. FR, EC, 52 Study the feasibility for tempering SID BSP 20:77:23 PK Thakur Apr’16 Mar’17
TE, SP of steel plates in the existing
Normalising Furnace #2, Plate
Mill
53. SR 53 Consistency in PPI BSP 19:77:24 SK Jha Apr’16 Jun’17
achieving/maintaining section in
rails and modification in roll pass
design
54. SR 54 Introduction of die lubrication PPI DSP 19:77:16 SK Jha Apr’15 Oct’16
system at Wheel & Axle Shop
55. SR, FR 55 Stabilisation of heat treatment of PPI RSP 19:37:18 DK Jain Apr’14 Dec’16
armour plates in polymer
quenchant at SPP
56. SR, FR, 56 Qualifying criteria test of rails as TS BSP 19:77:25 Neeldeep Apr’16 Mar’17
MCL per IRS-T-12-2009/EN-13674- Chandra
2011 specification
57. LS, C&IT 57 Introduction of 20 KW Roof Top SID RDCIS 63:74:29 KK Toppo Apr’16 Sep’17
Solar Photo Voltaic (PV) system
at RDCIS complex
58. AEC, 58 Development of special steel PD RSP 64:78:22 Ms P Apr’15 Dec’16
Casting, products (ASTM A 537 Cl.2, Pandey
SM ASTM 517 Gr F, Hardox 400,
Weldox 700 etc.)
59. AEC, LS 59 Development of semi-processed PD BSL 64:78:23 SK De Apr’15 Dec’17
electrical steel as per IS 15391
60. AEC, FR 60 Development of thinner gauge PD BSL 64:78:30 Dr (Ms) A Apr’16 Mar’17
high strength steels Deva
61. AEC, SR, 61 Development of Fe 500S grade PD ISP 64:78:26 D Karmakar Aug’15 Dec’16
SM, P&C TMT rebars
62. AEC, ML, 62 Study of microstructure and BR RDCIS 64:79:03 Dr (Ms) A Jun’15 Dec’16
SP, FR texture evolution in low carbon Deva
formable steels
63. AEC, 63 Evaluation of bond strength TS RDCIS 64:72:33 SK De Oct’15 Sep’16
D&E, SR properties of SAIL TMT rebars
64. SP, 64 Development of seismic resistant PD BSP 21:78:20 SK Shukla Apr’15 Sep’16
MT&CE HCR grade TMT rebars and
stabilisation of Fe 415 S/ 500 S
grade TMT rebars
65. SP, AEC 65 Development of special quality PD BSP 21:78:27 Md S Alam Apr’16 Sep’17
steel plates
66. SP, AEC, 66 Development of Ship Building PD BSL 21:78:29 SK Shukla Apr’16 Mar’18
MCL Quality (SBQ) grades
IV
Sl.No. Groups BOM PROJECT TITLE Cate- Plant/ Number Spokes- Date of Date of
gory Unit person Start Compl.
67. SP, AEC, 67 Development of T91 Creep PD ASP 21:78:28 K Apr’16 Mar’18
PMG Resistant Steel Nageswaran
68. SP 68 Thermomechanical simulation of SID RDCIS 21:70:62 K Apr’16 Jun’18
stress induced sensitization in Nageswaran
HAZ of arc welded austenitic
stainless steel
69. SP, MCL, 69 Understanding precipitation BR RDCIS 21:78:31 KA Anand Apr’16 Jun’18
FR behaviour and microstructural
evolution at different stages of
processing of CRGO steel
70. ML, SM, 70 Development of armour plates for PD ASP- 94:78:33 Dr G Sahoo Jun’16 May’17
SP defence application RSP
71. ML, FR, 71 Development of Texture in CRNO BR RDCIS 61:78:25 Dr G Sahoo Nov’15 Oct’17
M&SL Steel
72. MCL, LS, 72 Upgradation of Instron 8801 SID RDCIS 61:51:22 Dr SK Dhua Sep’14 Sep’16
SR servo-hydraulic universal testing
machine
73. MCL 73 Study on the corrosion fatigue SID RDCIS 61:41:61 PP Sarkar Apr’15 Mar’17
behaviour of rail steels
74. MT&CE, 74 Development of ferritic stainless PD SSP 23:78:24 Dr P Jul’15 Dec’16
MCL, ML steel for elevator application with Saravanan
improved mechanical properties
and corrosion resistance
75. MT&CE, 75 Development of TRIP-enhanced SID RDCIS 23:78:32 S Srikanth Jul’16 Jun’18
M&SL, lean duplex stainless steel on
FR, SP, laboratory scale
ML, MCL
76. EM&T 76 Improvement in performance of PPI BSP 30:71:42 KK Singh Apr’16 Apr’17
mixer tools of intensive Sinter
Mixer of Machine #2 of SP-III
77. EM&T 77 Life enhancement of mould rolls PPI RSP 30:71:43 P Sahana May’16 Dec’17
and Segment #1 rolls of Slab
Caster #3 SMS-II
78. PA, 78 Development of an automatic lime PPI RSP 59:68:84 Anup Prasad Apr’15 Sep’17
Agglmn, dosing control system by on-line
D&E, analysis of basicity of sinter raw
C&IT, mix in SP#3
BFT
79. PA, AAPC 79 Development of system for SID RDCIS 59:68:86 Anup Prasad Apr’16 Oct’17
real time sensing of
poisonous gases, GHG
emissions & Industrial
surveillances for Steel &
Mining Industry
80. P&C 80 Centralized monitoring and PPI DSP 32:68:83 S Singh Apr’15 Dec’16
Control for wheel handling system
at Wheel & Axle plant
81. P&C, PA, 81 Performance improvement of roll PPI BSL 32:68:87 Deepak Apr’16 Jun’17
D&E grinding machine #2 of RGBS #1, Kumar
CRM
V
Sl.No. Groups BOM PROJECT TITLE Cate- Plant/ Number Spokes- Date of Date of
gory Unit person Start Compl.
82. P&C, 82 Indigenous development of mould SID RSP 32:68:85 I Banerjee Apr’16 Mar’18
C&IT, monitoring system for Continuous
Casting, Casters
D&E
83. AAPC, 83 Development of an advanced PPI BSL 86:68:82 RS Kumar Apr’15 Mar’17
CCT process control system for COB
#3 & 4
84. AAPC, 84 Implementation of SID DSP 86:68:88 M Apr’16 Oct’17
C&IT, computerized heating control Gangadaran
CCT, CCL model system (COHC) in
COB#5
85. AAPC, 85 Development of a laboratory for SID RDCIS 86:51:23 PA Aneesh Aug’15 Jul’17
D&E industrial robotics
86. C&IT, EC 86 Energy optimization for air-gas PPI BSP 31:74:24 Ms Apr’15 Oct’16
control at stoves by HT VVVF Manjushree
drives for combustion air fan
motors at BF #6
87. C&IT 87 Implementation of an information PPI BSL 31:46:98 S Khan Apr’16 Sep’17
system for streamlining of
inventory at CRM 1 & 2 complex
88. C&IT 88 Computerisation of contract SID RDCIS 31:46:94 Ms Apr’15 Sep’16
activities, cylinder rent Manjushree
management, registration of
vendors, risk purchase tracking
and MIS generation for MMD
89. C&IT 89 Development of software for bank SID RDCIS 31:46:99 Ms Apr’16 Mar’18
guarantee, budget control, estate Manjushree
dues, invoicing for external
earning & PF functions and its
integration with Finance
90. C&IT 90 Computerisation of HR functions SID RDCIS 31:80:01 Ms S Selvi Apr’16 Nov’17
and its integration with Finance
software
91. D&E 91 Automation of slab extractor PPI BSP 35:46:97 Ashit Prasad Apr’15 Jan’17
mechanism of RHFs and slab
thickness measuring system
before Roughing stand of Plate
Mill
92. D&E 92 Design and development of a PPI BSP 35:46:96 RR Apr’15 Sep’16
system for monitoring of critical Choudhary
process parameters and
protection of the welding
machines at R&S Mill
93. D&E 93 Design of an improved system for PPI BSL 35:77:19 Ashit Prasad Apr’15 Dec’16
synchronisation of arms of slab
kick off mechanism at HSM
94. D&E 94 Design and development of an PPI BSL 35:76:14 ST Selvam Apr’15 Dec’16
online de-clogging system for pre-
scrubber of Gas Cleaning plant
(GCP) at BF#2
95. D&E 95 Electrical energy conservation PPI BSL 35:74:26 A Prasad Apr’16 Sep’17
through emulsion flow control in
TCM #2, CRM
VI
PLANT / UNIT WISE DISTRIBUTION OF PROJECTS
BSP 11 4 15
DSP 9 3 12
RSP 5 9 14
BSL 7 6 13
ISP 2 - 2
ASP 1 2 3
SSP 1 - 1
RMD 1 - 1
CCSO 1 - 1
SRU 1 1 2
SRCL 1 - 1
RDCIS 11 19 30
Total 51 44 95
VII
PROJECTS TO BE COMPLETED DURING 2016-17
(PLANT WISE AND CATEGORY WISE)
BSP 7 1 1 2 11
DSP 7 2 9
RSP 4 1 5
BSL 5 1 1 7
ISP 1 1 2
ASP 1 1
SSP 1 1
RMD 1 1
CCSO 1 1
SRU 1 1
SRCL 1 1
RDCIS 8 1 2 11
Total 25 7 11 1 7 51
VIII
DISTRIBUTION OF PROJECTS TO BE COMPLETED
DURING 2016-17: PLANT WISE
2016 2017
Plant Total
Apr May Jun Jul Aug Sep Oct Nov Dec Jan Feb Mar
BSP 1 2 1 2 1 4 11
DSP 1 1 3 1 3 9
RSP 2 2 1 5
BSL 2 1 4 7
ISP 1 1 2
ASP 1 1
SSP 1 1
RMD 1 1
CCSO 1 1
SRU 1 1
SRCL 1 1
RDCIS 2 3 1 1 4 11
Total 1 3 1 7 2 1 13 6 17 51
IX
DISTRIBUTION OF PROJECTS TO BE COMPLETED
DURING 2016-17: GROUP WISE
2016 2017
Group Total
Apr May Jun Jul Aug Sep Oct Nov Dec Jan Feb Mar
CCT 1 1
CCL 1 1 2 4
TE 1 1 2
EC 0
Env 1 3 4
Agglmn 2 2
ME 1 1 2
BFT 2 2 4
SM 1 1 2 4
Casting 1 1
M&S
1 1
Lab
Ref 2 2 1 5
FR 1 1
SR 1 1 1 3
EM&T 0
LS 0
SP 1 1
AEC 1 3 1 5
MCL 1 1 2
MT&CE 1 1
PA 0
P&C 1 1
AAPC 1 1
C&IT 1 1 2
D&E 1 2 1 4
Total 0 1 3 0 1 7 2 1 13 6 0 17 51
X
DISTRIBUTION OF MILESTONES TO BE COMPLETED
DURING 2016-17: PLANT WISE
2016 2017
Plant Total
Apr May Jun Jul Aug Sep Oct Nov Dec Jan Feb Mar
BSP 6 7 14 4 10 10 6 2 12 6 5 10 92
DSP 5 3 7 3 3 5 4 10 8 1 6 4 59
RSP 2 9 6 12 3 6 7 5 12 6 8 2 78
BSL 1 8 2 10 5 7 4 4 10 7 11 7 76
ISP 0 1 1 2 0 3 2 2 1 0 0 0 12
ASP 1 2 5 1 0 0 3 2 6 2 0 0 22
SSP 1 1 1 1 2 6
RMD 1 1 2 1 1 1 7
CCSO 1 1 1 3
SRU 0 2 0 3 1 2 0 0 2 0 0 0 10
SRCL 1 1 1 2 5
RDCIS 5 15 23 19 16 26 7 16 13 11 13 15 179
Total 22 51 59 56 39 62 35 42 66 34 44 39 549
Updated
XI
DISTRIBUTION OF MILESTONES TO BE COMPLETED
DURING 2016-17: GROUP WISE
2016 2017
Group Total
Apr May Jun Jul Aug Sep Oct Nov Dec Jan Feb Mar
CCT 2 2 2 0 0 1 1 0 0 2 0 0 10
CCL 3 3 4 4 3 2 1 3 0 1 7 3 34
TE 0 3 2 3 3 1 0 2 1 2 1 2 20
EC 0
Env 0 3 2 2 2 5 2 4 3 5 0 1 29
Agglmn 1 2 0 2 3 1 1 1 3 2 7 2 25
ME 2 1 1 0 0 1 3 1 2 2 1 1 15
BFT 0 1 2 1 2 2 1 5 5 1 2 2 24
SM 1 4 3 1 0 1 2 1 1 1 2 2 19
Casting 0 1 2 4 1 0 3 1 5 2 3 3 25
M&S Lab 1 1 2 0 1 2 0 1 0 0 0 0 8
Ref 1 6 2 7 2 6 0 4 9 1 1 3 42
FR 0 2 3 5 3 3 3 1 4 2 4 4 34
SR 2 3 5 5 2 5 2 2 4 0 1 3 34
EM&T 2 1 2 1 0 1 1 0 1 0 2 1 12
LS 1 1 1 1 1 5
SP 2 2 10 4 5 4 3 3 5 4 3 1 46
AEC 0 2 5 5 2 7 3 3 6 1 1 3 38
MCLG 0 2 1 1 2 3 1 0 0 1 0 1 12
MLG 1 0 1 1 0 2 2 1 3 1 1 1 14
MT&CE 0 1 1 1 1 3 0 2 2 0 1 1 13
PA 0 1 0 1 0 1 0 1 0 0 2 1 7
P&C 1 2 1 3 0 0 1 2 3 1 0 0 14
AAPC 1 2 4 1 0 2 0 0 3 0 2 1 16
C&IT 0 3 3 3 3 5 3 1 1 3 3 1 29
D&E 1 2 1 1 3 4 2 3 4 2 0 1 24
Total 22 51 59 56 39 62 35 42 66 34 44 39 549
XII
1
Sheet 1 of 2
1.39 Heat making and processing (2nd 01 Aug, 2016 30 Nov, 2016 III
campaign) as per modified steel chemistry
& process parameters
Title: Production of special quality slabs for export and value added plates through
New Plate Mill
3.1 Signing of agreement with IIT Kharagpur 01 Apr, 2016 15 Jul, 2016 II
for collaborative project
3.2 Modification of existing set-up at IIT 15 Jul, 2016 31 Oct, 2016 III
Kharagpur
3.4 Design and fabrication of patternometer 15 Jul, 2016 30 Nov, 2016 III
for spray density measurement of caster
nozzles
3.5 Finalization of design features and criteria 01 Apr, 2016 30 Sep, 2016 II
of experimental set-up
3.6 Development of drawings & equipment 01 Jun, 2016 30 Nov, 2016 III
layout and identification of space
4.2 Study the existing process parameters of 01 Apr, 2016 30 Jun, 2016 I
cooling section
4.3 Study the existing process parameters of 01 Jul, 2017 30 Sep, 2016 II
Distillation section
4.4 Study the existing process parameters of 01 Oct, 2016 31 Jan, 2017 IV
Regeneration section
Title: Improvement in coke screen efficiency and performance by replacing metal deck
with rubber deck at COB #6
6.3 Placement of order of rubber deck for 01 Jul, 2016 31 Oct, 2016 III
coke screens
6.4 Delivery of rubber deck for coke screens 01 Nov, 2016 31 Jan, 2017 IV
7.1 Preparation of TS and raising of indent for 01 Apr, 2016 30 Apr, 2016 I
data logger
7.3 Placement of order for data logger 01 May, 2016 31 Aug, 2016 II
7.5 Sampling and analysis of flue gas from 01 May, 2016 28 Feb, 2017 IV
ovens/ batteries of COB #6 before and
after repairs.
7.6 Periodic sampling and analysis of flue gas 01 May, 2016 28 Feb, 2017 IV
from stack of other batteries.
Title: Characterization of new indigenous coal and creation of a coal testing laboratory
at CCSO
8.8 Training for sample preparation and 01 Jun, 2016 31 Jul, 2016 II
testing
Title: Development of procedure for Pilot Oven carbonisation test for producing coke
having properties similar to that of commercial ovens
Title: Evaluation of new imported coking coals through Pilot Carbonization tests
10.2 Preparation of TS and raising indent for 01 Apr, 2016 30 Jun, 2016 I
procurement of laboratory incubator for
real density determination of coke samples
10.5 Pilot oven carbonization tests 01 Aug, 2016 31 Nov, 2016 III
10.6 Delivery of laboratory incubator for real 01 Sep, 2016 30 Nov, 2016 III
density determination of coke samples
10.8 Analysis of laboratory testing and pilot 16 Jan, 2017 15 Feb, 2017 IV
oven data
10.9 Preparation and submission of test report 16 Feb, 2017 28 Feb, 2017 IV
to Corporate Office
12.6 Placement of purchase order for site job 01 Nov, 2015 31 Jul, 2016 II
for the erection and installation of
modified ladle heating system
12.8 Erection & installation of modified ladle 01 Aug, 2016 30 Nov, 2016 III
heating system
12.9 Performance evaluation of modified ladle 01 Nov, 2016 31 Dec, 2016 III
heating system
13.2 Finalisation of agreement with IIT Kanpur 01 May, 2016 30 Jun, 2016 I
13.3 To study the feasibility of using existing 01 May, 2016 31 Jul, 2016 II
equipment / instruments available in Coal
Combustion Unit
13.4 Preparation of layout and list of required 01 Jun, 2016 31 Jul, 2016 II
equipment / instruments
13.5 Design of flat flame burner and furnace 01 Jun, 2016 31 Aug, 2016 II
Title: Combustion simulation of existing side burner of sinter machine of IISCO Steel
Plant and work out improved burner design
14.1 Study of the existing burner design of 01 Apr, 2016 31 May, 2016 I
ignition hood of Sinter machine of ISP
14.4 Validation of simulated results with actual 01 Jul, 2016 31 Aug, 2016 II
flame characteristics.
14.5 Combustion simulation of new burner 01 Sep, 2016 30 Nov, 2016 III
designs
14.7 Working out improved burner design by 01 Feb, 2017 28 Feb, 2017 IV
incorporating minimum modification in
the existing combustion system
16.10 Delivery of chemical dosing and water 01 Jan, 2016 30 Sep, 2016 II
quality monitoring & control system
16.11 Installation and commissioning of physical 01 Sep, 2016 31 Oct, 2016 III
water treatment module
Title: Feasibility study of BOF slag by steam maturing for its use in cement concrete
17.6 Experimentation, data generation, testing 01 Oct, 2016 31 Dec, 2016 III
of matured slag
18.4 Cumulative and comprehensive data 01 Oct, 2016 31 Oct, 2016 III
analysis
18.5 Preparation and submission of completion 01 Nov, 2016 30 Nov, 2016 III
report
Title: Exploring use of air cooled BF slag in construction of rigid concrete pavement in
RDCIS complex
19.5 Construction of rigid concrete pavement 01 Jul, 2016 30 Nov, 2016 III
in RDCIS, Ranchi
20.1 Preparation of TS and raising of indent for 01 Apr, 2016 31 May, 2016 I
transportation of sample
20.4 Raising of indent for abiotic system 01 Jul, 2016 31 Aug, 2016 II
20.7 Batch studies in pilot plant using fresh set 01 Oct, 2016 31 Dec, 2016 III
of samples
20.8 Placement of order for abiotic system 01 Dec, 2016 31 Jan, 2017 IV
Title: Optimisation of sintering air flow and process parameters at Sinter Plant
22.2 Characterise air-flow in Sinter m/c#2, before 01 Apr, 2016 31 May, 2016 I
capital repair and identification of leakage points
22.3 Technical intervention during capital repair in 01 Jun, 2016 31 Jul, 2016 II
sinter m/c#2
22.4 Characterise air-flow in Sinter m/c#3, before 01 Jul, 2016 31 Aug, 2016 II
capital repair and identification of leakage points
22.5 Characterise air-flow in Sinter m/c#2, after capital 01 Aug, 2016 30 Sep, 2016 II
repair and quantification of results
22.6 Technical intervention during capital repair in 01 Sep, 2016 31 Oct, 2016 III
sinter m/c#3
22.7 Characterise air-flow in Sinter m/c#3, after capital 01 Nov, 2016 31 Dec, 2016 III
repair and quantification of results
22.8 Characterise air-flow in Sinter m/c#1, before 01 Nov, 2016 31 Dec, 2016 III
capital repair and identification of leakage points
22.9 Sinter sample collection and characterisation in 01 May, 2016 28 Feb, 2017 IV
terms of physical & chemical properties
22.10 Study the process parameters and effect on 01 May, 2016 28 Feb, 2017 IV
properties
22.11 Study sinter microstructure and effect of process 01 May, 2016 28 Feb, 2017 IV
parameters
22.12 Technical intervention during capital repair in 01 Jan, 2017 28 Feb, 2017 IV
sinter m/c#1
22.13 Characterise air-flow in Sinter m/c#1, after capital 01 Feb, 2017 28 Feb, 2017 IV
repair and quantification of results
22.14 Preparation and submission of completion report 01 Mar, 2017 31 Mar, 2017 IV
Title: Process up-gradation in slime beneficiation unit at CSW Plant, Dalli Mines
23.20 Order placement for Installation and 01 Feb, 2016 30 Jun, 2016 I
commissioning of the equipments
23.21 Installation and commissioning of the 01 Jul, 2016 31 Oct, 2016 III
equipments
23.22 Trial run and optimization of the upgraded 01 Nov, 2016 30 Nov, 2016 III
system
23.23 Preparation and submission of completion 01 Dec, 2016 31 Dec, 2016 III
report
24.1 Study of the existing washing plant 01 Apr, 2016 30 Apr, 2016 I
operation
24.2 Raising of indent for the modification in 01 May, 2016 31 May, 2016 I
the feed system of the screw classifier
24.3 Study for optimization of classifier 01 Jun, 2016 31 Oct, 2016 III
operation
24.4 Placement of order for the modification in 01 Jun, 2016 31 Oct, 2016 III
the feed system of the screw classifier
24.5 Modification in the feed system of the 01 Nov, 2016 31 Jan, 2017 IV
screw classifier at washing plant, MIOM
24.6 Sample collection and analysis at RDCIS 01 Feb, 2017 28 Feb, 2017 IV
after optimization of classifier operation
Title: Study of major factors effecting quality of iron ore sinter and develop ways to
improve it in context of SAIL operation
25.6 Placement or order for X-ray micro CT 01 Feb, 2016 30 Apr, 2016 I
laboratory test
25.8 Chemical, microscopic and metallurgical 01 Apr, 2016 31 Dec, 2016 III
characterization of different raw material.
Title: Introduction of hot metal temperature measurement system in Cast House of BF# 3
27.1 Preparation of TS & raising of indent for 01 Apr, 2016 31 May, 2016 I
coated tuyere
27.2 Placement of order for coated tuyere 01 Jun, 2016 30 Sep, 2016 II
27.3 Delivery of for coated tuyere 01 Oct, 2016 31 Dec, 2016 III
27.4 Study of existing heat loss through tuyeres 01 Oct, 2016 31 Dec, 2016 III
28.1 Collection of samples of Iron ore lump 01 Apr, 2016 30 Sep, 2016 II
and sinter for RI & RDI test
28.3 Collection of samples of Iron ore and 01 Jul, 2016 31 Jan, 2017 IV
sinter for softening –melting test
29.1 Monitoring of Bosh and shaft cooler 01 Apr, 2016 31 Jul, 2016 I
temperature
29.3 Monitoring of hearth cooler temperature 01 Jul, 2016 30 Nov, 2016 III
and study of hearth heat flux
29.5 Preparation and submission of completion 01 Dec, 2016 31 Dec, 2016 III
report
30.1 Study of existing stove condition and 01 Jun, 2016 30 Jun, 2016 I
identification of activities to enhance the
HBT
30.2 Thermal scanning of stoves, bustle main 01 Jul, 2016 30 Nov, 2016 III
& tuyere stock assembly
30.4 Maintaining higher waste gas temperature 01 Jul, 2016 31 Dec, 2017 III
leading to higher draughts
Title: Development of low cost flux practice and reduction in pipe defect at SMS-I
31.8 Plant trial with modified flux practice 01 Feb, 2016 31 May, 2016 I
32.1 Formulation of strategy and trials with 01 Jun, 2016 31 Oct, 2016 III
DRI/sinter including
32.2 Formulation of modified process strategy 01 Nov, 2016 30 Nov, 2016 III
for final trials
Title: Sequence casting & quality improvement of wheel steel through Bloom cum
Round caster
33.1 Study of shop logistic, process route and 01 Apr, 2016 31 May, 2016 I
identification of critical parameters
responsible for high treatment time in
VAD
33.2 Preparation of modified process chart for 01 Jun, 2016 30 Jun, 2016 I
steel refining through LF-VAD route
33.3 Plant trial with modified process chart and 01 Jul, 2016 28 Feb, 2017 IV
suggested route. Evaluation of trial result
and fine tuning
33.4 Study the existing Caster detail and caster 01 Apr, 2016 30 Jun, 2016 I
process parameters with respect to round
casting
33.6 Evaluation of cast quality w.r.t. macro 01 Aug, 2016 28 Feb, 2017 IV
structure and ultrasonic inspection results
34.1 Literature Study & formulation of concept 01 Apr, 2016 30 Jun, 2016 I
for mathematical model
34.3 Validation of model with plant data of 01 Jan, 2017 28 Feb, 2017 IV
BSL.
35.3 Metallurgical investigation plate and slab 01 May, 2016 31 Oct, 2016 III
samples
35.4 Preliminary trial with modified casting 01 Aug, 2016 31 Jan, 2017 IV
parameters and evaluation of results
35.5 Evaluation of trial results and fine tuning 01 Feb, 2017 31 Mar, 2017 IV
of casting parameters
36.5 Plant trials with coated mould plates 01 Aug, 2016 31 Jan, 2017 IV
37.1 Development of model and its validation 01 Apr, 2016 30 Jun, 2016 I
with literature data
37.2 Data Collection for upcoming Beam Blank 01 May, 2016 31 Aug, 2016 II
Sizes in SAIL (ISP & BSP)
37.3 Design of Experiment for parametric study 01 Aug, 2016 31 Oct, 2016 III
37.4 Modeling and study of mould flow 01 Oct, 2016 31 Dec, 2016 III
characteristics in different mould Section
Sizes with existing nozzle configuration
38.9 Compilation of data and data analysis 01 Mar, 2016 31 May, 2016 I
Title: Study the effect of CaO, FeO, MgO, MnO , SiO2 and Al2O3 contents of slag on
dephosphorisation of Steel
39.1 Preparation and raising of Indent for 01 Apr, 2016 30 Apr, 2016 I
chemicals and ferro-alloys
39.2 Placement of order for the chemicals and 01 May, 2016 30 Jun, 2016 I
ferro-alloys
40.12 Placement of order foe formats making and 01 Oct, 2015 31 May, 2016 I
application work for 3 furnaces
40.16 Receipt of formats and shutter vibrators 01 Jan, 2016 31 Jul, 2016 II
40.17 Installation of improved refractory castable 01 Aug, 2016 31 Dec, 2016 III
in heating zone of all the three furnaces.
40.18 Monitoring the performance of skid pipes 01 Aug, 2016 31 Dec, 2016 III
in re-heating furnace
40.19 Report preparation and submission 01 Dec, 2016 31 Dec, 2016 III
41.6 Follow up of trial by SMS(Op) with higher 01 Aug, 2015 31 Dec, 2016 III
life well block & seating block
41.9 Trial with modified design lining sets 01 Dec, 2016 28 Feb, 2017 IV
41.10 Plant trial with suggested de-oxidation, flux 01 Aug, 2015 30 Apr, 2016 I
and gas purging regime. Evaluation of trial
result and fine tuning.
42.3 Pilot scale manufacturing of developed 01 Oct, 2016 30 Nov, 2016 III
bricks in SRU and evaluation of its
properties
43.10 Preparation and submission of completion 01 Dec, 2016 31 Dec, 2016 III
report.
44.6 Receipt of Laser Based Particle Size 01 Feb, 2016 31 Jul, 2016 II
Analyzer, Installation & Commissioning
44.7 Pilot Scale Manufacturing of Plastic Mass 01 May, 2016 31 Aug, 2016 II
at SRU, IFICO & evaluation of properties
at RDCIS Laboratory
Title: Development of carbon containing castables by using nano carbon and water
wettable graphite
45.4 Placement of order of XRD detector 01 Aug, 2016 31 Dec, 2016 III
Title: Development of MgAl2O4 solid solution layer on MgO grains through addition of
nano ceramic components for application as superior refractory materials
47.6 Study the preformed and forming spinel 01 May, 2016 30 Nov, 2016 III
coating on magnesia grains by RDCIS.
48.2 Signing of collaboration agreement with 01 Jun, 2016 30 Nov, 2016 III
School of Materials Science &
Nanotechnology, Jadavpur University.
49.6 Study of coil centre in mill 01 Aug, 2016 31 Oct, 2016 III
49.8 Placement of order for Modified Side 01 Sep, 2016 28 Feb, 2017 IV
Guide Display System
50.2 Study of pickling quality and optimisation 01 May, 2016 31 Jul, 2016 II
of bath conditions
50.3 Preparation of TS and raising of indent for 01 Jun, 2016 31 Aug, 2016 II
modified rinsing system at PL-2
50.4 Study of emulsion system and taking 01 Jul, 2016 30 Sep, 2016 III
corrective action for achieving desired
emulsion cleanliness level at TM & CR.1
50.6 Modification of air wiping system 01 Sep, 2016 31 Dec, 2016 III
50.7 Placement of order for modified rinsing 01 Sep, 2016 28 Feb, 2017 IV
system
51.4 Study of wet temper rolling at SPM 01 Aug, 2016 30 Sep, 2016 II
51.5 Preparation of TS and raising of indent for 01 Sep, 2016 31 Oct, 2016 III
procurement of Measuring equipments
(Reflectometer, pyrometer, etc.)
Title: Study the feasibility for tempering of steel plates in the existing Normalising
Furnace #2, Plate Mill
52.3 Identification of different steel grades for 01 Aug, 2016 31 Oct, 2016 III
tempering through normalizing furnace
52.4 Work out thermal regimes for different 01 Oct, 2016 31 Dec, 2016 III
grades and thicknesses.
52.5 Plant trials based on designed thermal 01 Jan, 2017 31 Mar, 2017 IV
regimes
53.1 Review of literature related to roll pass 01 Apr, 2016 31 May, 2016 I
design
53.3 Preparation of scope of work and raising 01 May, 2016 30 Jun, 2016 I
of indent for roll pass design consultancy
53.5 Study of the existing roll pass design 01 Jun, 2016 31 Aug, 2016 II
53.6 Cobble analysis for reduction of defects on 01 Jul, 2016 30 Sep, 2016 II
account of section variation
53.7 Modification in roll pass design and trial 01 Aug, 2016 31 Oct, 2016 III
for reduction in section variation
53.8 Cobble analysis for reduction of defects on 01 Oct, 2016 31 Dec, 2016 III
account of Lap
53.9 Modification in roll pass design and trial 01 Dec, 2016 31 Feb, 2017 IV
for reduction in lap formation
54.11 Trial with modified lubrication system 01 Jul, 2016 30 Sep, 2016 II
54.12 Compilation and analysis of trial data 01 Aug, 2016 30 Sep, 2016 II
54.13 Preparation and submission of completion 01 Oct, 2016 31 Oct, 2016 III
report
55.18 Replacement of oil and tank cleaning 01 Jul, 2015 31 Jul, 2016 II
55.22 Heat treatment of the full size plates and 01 Jul, 2016 30 Sep, 2016 II
their testing
55.23 Final discussion with CQA (Met) and 01 Oct, 2016 30 Nov, 2016 III
QAEN for approval of process for regular
production of plates
55.24 Preparation and submission of completion 01 Dec, 2016 31 Dec, 2016 III
report
56.2 Evaluation of qualifying criteria of rail for 01 Apr, 2016 30 Jun, 2016 I
samples received at RDCIS during Jan-
Mar, 2016
56.3 Preparation of TS and raising of indent for 01 Aug, 2016 31 Aug, 2016 II
strain gage, chemicals etc
56.4 Evaluation of qualifying criteria of rail for 01 Jul, 2016 30 Sep, 2016 II
samples received at RDCIS during Apr-
Jun, 2016
56.5 Evaluation of qualifying criteria of rail for 01 Oct, 2016 31 Dec, 2016 III
samples received at RDCIS during Jul-
Sep, 2016
56.6 Order placement for strain gage, chemicals 01 Sep, 2016 31 Dec, 2016 III
etc
56.7 Evaluation of qualifying criteria of rail for 01 Jan, 2017 31 Mar, 2017 IV
samples received at RDCIS in Oct-Dec,
2016
56.8 Delivery of strain gage, chemicals etc 01 Jan, 2017 31 Mar, 2017 IV
57.1 Identification of locations for solar system 01 Apr, 2016 30 Apr, 2016 I
57.3 Preparation of TS & raising of indents for 01 Jun, 2016 31 Aug, 2016 II
solar system
57.4 Placement of order for solar system 01 Sep, 2016 31 Dec, 2016 III
Title: Development of special steel products (ASTM A 537 Cl.2, ASTM 517 Gr F,
Hardox 400, Weldox 700 etc.)
58.4 Testing & Despatch of the material as per 01 Jul, 2015 31 May, 2016 I
TDC
58.7 Product promotion through interaction with 01 Nov, 2015 31 Oct, 2016 III
customers to obtain commercial orders
58.8 Execution of commercial orders as per 01 Dec, 2015 30 Nov, 2016 III
TDC
58.9 Preparation and submission of completion 01 Dec, 2016 31 Dec, 2016 III
report
61.4 Placement of order for pyrometer and 01 Jan, 2016 30 Jun, 2016 I
cable
61.5 Heat making with specified chemistry for 01 Nov, 2015 31 Jul, 2016 II
Fe500S grade TMT bars for different
diameter
61.6 Trial rolling of Fe500S grade TMT bars in 01 Dec, 2015 30 Sep, 2016 II
different diameter
61.8 Evaluation of properties of the rolled 01 Jan, 2016 31 Oct, 2016 III
products by tests in Laboratory/Test
House
61.9 Analysis of test results and 01 Mar, 2016 30 Nov, 2016 III
characterization of material.
Title: Study of microstructure and texture evolution in low carbon formable steels
62.10 Hot dip galvanising of cold rolled steel 01 Apr, 2016 30 Jun, 2016 I
samples at RDCIS
62.11 Property evaluation of hot dip galvanized 01 Jun, 2016 30 Sep, 2016 II
steel samples
62.12 Microstructural and textural study of hot 01 Jun, 2016 30 Sep, 2016 II
dip galvanized steel samples
62.13 Establishing structure property co-relation 01 Oct, 2016 31 Dec, 2016 III
62.14 Preparation and submission of completion 01 Dec, 2016 31 Dec, 2016 III
report
63.4 Computer simulation of bond test and 01 Nov, 2015 31 Jul, 2016 II
prediction of bond strength
63.6 Testing of samples and evaluation of bond 01 Apr, 2016 31 Aug, 2016 II
strength for each size
Title: Development of Seismic resistant HCR grade TMT rebars and stabilisation of Fe-
415S / 500S grade TMT rebars
64.10 Repeat trials with fine tuned parameters, if 01 Jan, 2016 30 Jun, 2016 I
required
65.2 Order procurement for DMR249A plates 01 May, 2016 30 Jun, 2016 II
65.3 Design of alloy chemistry for the proposed 01 Jul, 2016 31 Aug, 2016 II
grades and preparation of process charts
65.4 Trial heat making and casting 01 Sep, 2016 31 Dec, 2016 III
66.3 Raising of indent for Impact Testing 01 May, 2016 31 Jul, 2016 II
Machine, Chiller Unit and Profile
Projector
66.5 Placement of order for Impact Testing 01 Aug, 2016 31 Jan, 2017 IV
Machine, Chiller Unit and Profile
Projector
66.6 Trial heat making & processing as per 01 Nov, 2016 28 Feb, 2017 IV
process chart
67.1 Heat making and processing of T91 steel 01 Apr, 2016 30 Apr, 2016 I
67.2 Sample collection and preparation for 01 Apr, 2016 31 May, 2016 I
various studies
67.4 Preparation of TS and raising of indent for 01 May, 2016 30 Jun, 2016 I
Thermal Power Control system for
precipitation studies (attachment to
Gleeble 3500 system)
67.6 Hot tensile testing to assess high 01 May, 2016 31 Jul, 2016 II
temperature behaviour
67.7 Accelerated creep testing using Gleeble 01 Aug, 2016 31 Oct, 2016 III
3500 system
67.8 Placement of order for Thermal Power 01 Jul, 2016 30 Nov, 2016 III
Control system for precipitation studies
(attachment to Gleeble 3500 system)
67.11 Hot deformation behaviour studies using 01 Nov, 2016 31 Jan, 2017 IV
Gleeble
68.1 Literature search and understanding weld 01 Apr, 2016 30 Jun, 2016 I
HAZ simulation using Gleeble system
68.3 Arrangement of material for weld HAZ 01 Aug, 2016 31 Oct, 2016 III
simulation studies on Gleeble system
68.4 Sample preparation for HAZ simulation 01 Sep, 2016 31 Dec, 2016 III
69.1 Collation of information on CRGO Steel from 01 Apr, 2016 30 Jun, 2016 I
MIDHANI and elsewhere
69.2 Preparation and finalization of MoA with IIT 01 Apr, 2016 30 Jun, 2016 I
Kharagpur for detailed precipitate and texture
studies
69.3 Preparation of TS and raising of indent for 01 May, 2016 31 Jul, 2016 II
Vacuum Desiccator, pump with all other
accessories required
69.4 Sample preparation and detailed microstructural 01 May, 2016 31 Aug, 2016 II
characterization of hot rolled, hot rolled and
annealed samples received from MIDHANI
69.5 Arrangement and sending of samples from hot 01 Jul, 2016 31 Aug, 2016 II
rolled and annealed plates for detailed studies at
IIT Kharagpur
69.6 Placement of order for Vacuum Desiccator, 01 Aug, 2016 31 Oct, 2016 III
pump with all other accessories required
69.7 Detailed Microstructural characterization of hot 01 Aug, 2016 30 Nov, 2016 III
rolled and annealed samples and SEM/ EBSD
studies to understand nature of second phase of
hot rolled and hot rolled annealed samples in
association with IIT Kharagpur
69.8 Macro-Texture study using X-ray Diffraction of 01 Sep, 2016 31 Dec, 2016 III
hot rolled and hot rolled annealed samples
69.9 Delivery of Vacuum Desiccator, pump with all 01 Dec, 2016 31 Jan, 2017 IV
other accessories
69.10 Detailed characterization of nature, size, shape 01 Oct, 2016 28 Feb, 2017 IV
and spatial distribution of the MnS/ (Mn,Cu)S
inhibitors using TEM, on hot rolled and hot
rolled annealed samples
70.2 Heat making and continuous casting of 01 Jul, 2016 31 Oct, 2016 III
slabs at ASP
70.3 Hot deformation study in Gleeble 01 Aug, 2016 31 Oct, 2016 III
70.4 Transfer of slabs from ASP to RSP for 01 Aug, 2016 30 Nov, 2016 III
rolling into plates in new Plate Mill
70.5 Hot rolling of CC slabs to plates at RSP 01 Oct, 2016 31 Dec, 2016 III
70.6 Quenching & tempering of plates at SPP 01 Oct, 2016 31 Jan, 2017 IV
71.8 Texture study of as received hot band and 01 Apr, 2016 30 Apr, 2016 I
CRNO sheet
71.13 Metallography of cold rolled sheets 01 Nov, 2016 31 Dec, 2016 III
71.14 Tensile and fractography of CRNO sheet 01 Jan, 2017 28 Feb, 2017 IV
71.15 Texture study of cold rolled sheet using 01 Jan, 2017 31 Mar, 2017 IV
EBSD
72.6 Site preparation and delivery of hardware 01 Jul, 2015 31 Aug, 2016 II
and software packages related to
upgradation of Instron 8801 system, re-
circulating chiller unit, temperature
control unit and laboratory furniture at site
73.6 Study of corrosion fatigue behaviour of rail 01 Jan, 2016 31 Aug, 2016 II
steels in 3.5% NaCl solution
73.7 Fractographic study of corrosion fatigue 01 Apr, 2016 31 Oct, 2016 III
tested samples
73.8 Analysis of corrosion fatigue test results 01 Aug, 2016 31 Jan, 2017 IV
Title: Development of ferritic stainless steel for elevator application with improved
mechanical properties & corrosion resistance
74.9 Trial heat making on plant scale 01 May, 2016 30 Sep, 2016 II
74.10 Evaluation of steel properties and 01 Aug, 2016 30 Nov, 2016 III
performance with respect to mechanical
properties and corrosion behaviour of the
plant heat
74.11 Analysis of results and evolution of 01 Nov, 2016 31 Dec, 2016 III
recommendations
74.12 Preparation and submission of completion 01 Dec, 2016 31 Dec, 2016 III
report
75.2 Formulation of alloy design for TRIP- 01 Jul, 2016 31 Aug, 2016 II
enhanced LDSS using ThermoCalc
75.4 Collection of 430 stainless steel scrap and 01 Aug, 2016 30 Sep, 2016 II
arranging raw materials such as pure iron
ingots, Mn metal, nitrided Fe-Mn, LC Fe-
Cr, LC Fe-Si, Fe-Mo, Ni briquettes and
shredded Cu for laboratory heat making
75.5 Melting of alloys in 100 kg air induction 01 Aug, 2016 30 Nov, 2016 III
furnace in laboratory and casting into
experimental ingots
75.6 Dilatometric and hot deformation studies 01 Nov, 2016 28 Feb, 2017 IV
in Gleeble thermo-mechanical simulator
for identification of optimal process
windows for hot rolling and annealing
treatments
75.7 Reheating and hot rolling of ingots in 01 Dec, 2016 31 Mar, 2017 IV
experimental rolling mill
76.1 Examination of nature & extent of wear of 01 Apr, 2016 30 Apr, 2016 I
currently used sinter mixer tool material
76.4 Preparation of TS & raising of indent for 01 May, 2016 30 Jun, 2016 I
experimental tools for sinter mixer
76.5 Placement of order for experimental tools 01 Jul, 2016 30 Sep, 2016 II
for sinter mixer
76.6 Delivery of order for experimental tools 01 Oct, 2016 31 Dec, 2016 III
for sinter mixer
Title: Life enhancement of mould rolls and Segment #1 rolls of Slab Caster #3, SMS - II
77.3 Preparation of TS and raising of indent for 01 Jul, 2016 31 Oct, 2016 III
Cladding of Foot and Segment#1 rolls
77.4 Placement of order for Cladding of Foot 01 Nov, 2016 28 Feb, 2017 IV
and Segment#1 rolls
78.5 Delivery of measurement & automation 01 Feb, 2016 30 Nov, 2016 III
system
Title: Development of system for real time sensing of poisonous gases, GHG emissions
& Industrial surveillances for Steel & Mining Industry
79.3 Placement of order for UAV System 01 Oct, 2016 28 Feb, 2017 IV
Title: Centralized monitoring and Control for wheel handling system at Wheel & Axle
Plant
80.5 Inspection & Delivery of major equipment 01 May, 2016 31 Jul, 2016 II
80.6 Erection & Commissioning of RIO and 01 Aug, 2016 31 Oct, 2016 III
PLC based wheel handling system for all
fifteen (15) CNC machines , Signal
transmission testing and cable laying
80.8 Stabilization & performance Evaluation 01 Nov, 2016 31 Dec, 2016 III
80.9 Preparation & submission of completion 01 Dec, 2016 31 Dec, 2016 III
report
81.1 Study of original drawings and the 01 Apr, 2016 15 May, 2016 I
existing problems
81.2 Preparation of TS and raising of indent for 01 May, 2016 15 Jul, 2016 II
Motors, Drives Panels, Cables, MCBs,
MCCB, Transformers, Sensors, Power
Supply, Special measurement system for
grinding machine
81.3 Placement of order for Motors, Drives 01 Jul, 2016 30 Nov, 2016 III
Panels, Cables, MCBs, MCCB,
Transformers, Sensors, Power Supply,
Special measurement system for grinding
machine
Title: Development of an advanced process control system for coke oven battery #3 & 4
83.8 Receipt of PLC based Control System 01 Mar, 2016 31 May, 2016 I
84.3 Software design of interfaces and HMI 01 May, 2016 30 Jun, 2016 I
85.6 Placement of order for Basic Robotic 01 Jan, 2016 30 Jun, 2016 I
Platform
85.7 Receipt of Basic Robotic Platform 01 Jun, 2016 31 Dec, 2016 III
Title: Energy optimization for air-gas control at stoves by HT VVVF drives for
combustion air fan motors at BF #6
86.9 Testing, trial & validation, training 01 Aug, 2016 30 Sep, 2016 II
86.10 Preparation and submission of completion 01 Oct, 2016 31 Oct, 2016 III
report
87.1 System study and analysis of software 01 Apr, 2016 31 May, 2016 I
requirement
87.2 Study of present network in CRM and its 01 May, 2016 30 Jun, 2016 I
extension
87.3 Preparation of TS and raising of indent for 01 May, 2016 31 Jul, 2016 II
Servers, PC Nodes with cabinet, Hand Held
Devices with accessories, Wireless Access
Points, UPS for servers,. PCs, Printers Oracle
database, Visual Studio (prof) and
development tools like crystal report, Adobe
Acrobat, backup software, Application
software , hardware and software for network
extension, Network Switches, cables, conduits
etc.
87.5 Study of data transfer requirement from HSM 01 Aug, 2016 30 Sep, 2016 II
87.6 Placement of Order for Servers, PC Nodes 01 Aug, 2016 31 Dec, 2016 III
with cabinet, Hand Held Devices with
accessories, Wireless Access Points, UPS for
servers,. PCs, Printers Oracle database, Visual
Studio (prof) and development tools like
crystal report, Adobe Acrobat, backup
software, Application software , hardware and
software for network extension, Network
Switches, cables, conduits etc.
87.8 Finalization of scheme for data validation at 01 Jan, 2017 28 Feb, 2017 IV
different locations of CRM
88.10 Design & development of s/w Vendor 01 Apr, 2016 31 May, 2016 I
Registration
88.11 Design & development of s/w for risk 01 Jun, 2016 31 Jul, 2016 II
purchase
88.12 Design & development of software for 01 Jul, 2016 31 Jul, 2016 II
integrated menu systems for all functions
Title: Development of software for bank guarantee, budget control, estate dues,
invoicing for external earning & PF functions and its integration with Finance
89.2 Design of database for house rent & 01 Jul, 2016 30 Sep, 2016 II
electricity bills
89.3 Preparation of TS and raising of indent for 01 Aug, 2016 31 Oct, 2016 III
Oracle License, Virtualization &
associated s/w & Operating Systems, SAN
HDD, scanners, pendrives, RAM chip,
switches etc
89.4 Design of Database for bank guarantee 01 Oct, 2016 30 Nov, 2016 III
management
89.5 Placement of order for Oracle License, 01 Nov, 2016 28 Feb, 2017 IV
Virtualization & associated s/w &
Operating Systems, SAN HDD, scanners,
pendrives, RAM chip, switches etc ,
89.6 Design of database for data transfer w.r.t 01 Jan, 2017 28 Feb, 2017 IV
PF remittance of Contract labours to PF
Trust
89.7 Development of software for house rent & 01 Dec, 2016 31 Mar, 2017 IV
electricity bills
90.2 Preparation of TS and raising of indent for 01 Jun, 2016 30 Sep, 2016 II
Server, Windows license, workstation,
External HDD etc.
90.4 Placement of order for Server, Windows 01 Oct, 2016 31 Jan, 2017 IV
license, workstation, External HDD etc.
Title: Automation of slab extractor mechanism of RHFs and slab thickness measuring
system before Roughing stand of Plate Mill
91.5 Manufacturing & Inspection and receipt 01 Apr, 2016 31 Aug, 2016 II
of Material at Site
91.6 Erection & Commissioning of the system 01 Aug, 2016 31 Oct, 2016 III
91.7 Performance Evaluation of the System 01 Nov, 2016 31 Dec, 2016 III
Title: Design and development of a system for monitoring of critical process parameters
and protection of the welding machine at R&S Mill
92.6 Erection & Commissioning of the system 01 Jun, 2016 31 Aug, 2016 II
Title: Design of an improved system for synchronisation of arms of slab kick off
mechanism at HSM
93.5 Manufacturing & Inspection and receipt of 01 Mar, 2016 31 Jul, 2016 II
the new system for the proper
synchronization of the arms of the slab
kick off mechanism
93.6 Erection & Commissioning of the new 01 Aug, 2016 31 Oct, 2016 III
system for the proper synchronization of
the arms of the slab kick off mechanism
93.7 Performance Evaluation of the new system 01 Nov, 2016 31 Dec, 2016 III
for the proper synchronization of the arms
of the slab kick off mechanism
93.8 Preparation and submission of completion 01 Dec, 2016 31 Dec, 2016 III
report
Title: Design and development of an online de-clogging system for pre-scrubber of Gas
Cleaning Plant, BF#2
94.6 Erection & commissioning of the de- 01 Aug, 2016 30 Sep, 2016 II
clogging system of pre-scrubber at site
94.7 Performance evaluation of installed system 01 Oct, 2016 30 Nov, 2016 III
94.8 Preparation and submission of completion 01 Dec, 2016 31 Dec, 2016 III
report
Title: Electrical energy conservation through emulsion flow control in TCM #2, CRM
95.1 Preparation of TS and raising of indent for 01 Apr, 2016 31 May, 2016 I
the system (AC Drive Panel, Cables,
MCB, MCCB)
95.2 Placement of order for the system (AC 01 Jun, 2016 30 Nov, 2016 III
Drive Panel, Cables , MCB, MCCB)