Professional Documents
Culture Documents
dk
*All heads must be set at the same pattern. ffl E!'l - Mounting
Nut
Momentarily apply +VDC to YELLOW wire:
1. Drill holes on mounting surface for wire exit
once for next pattern. and mounting bolts.
· quick 3 times for reset.
2. Secure beacon onto mounting surface
with mounting bolts.
Bolts
0 1 Washer 3. C/ose
'(�t j
D ...V...
,___ .,!
www.transport-teknik.dk
1. Open
Magnetic Mount
Push down on T ab 0, and twist the dorne
counterclockwise O, then lift the dorne to open.
Power Plug
(Actual cigar plug type and cable
type base on the model ordered.) 2.Change
While activating Warning Mode, momentarily push the
RED BUT TON f) to change to the next flash pattern.
(see Flash Patterns chart)
3. Close
O-
Magnetic Mount / Bolt Mount
Align dorne indent @ befare Tab (J ,
e
l
rf"
___ n�--L ___________ J
WARNING:
It is not recommended to use magnetically mounted warning devices on outside of vehicle in motion.
Usage is at the sole risk and responsibility of the user. (For moving vehicles, please use Power Mags)
3 Quad [2Hz]
4 Single [SAE]
5 Double [SAE]
6 Quad [SAE]
7 Quint [SAE]
8 Mega
9 Ultra [SAE]
10 Single-Quad
11 Single H/L
.._ for standard Cigar .._ for IS04165 Socket
Ligher Socket Note: i. This unit may not be factory-set at FP#1
ii. Actual approval base on the model ordered.