Professional Documents
Culture Documents
In the book, in a popular scientific and accessible form, “all seals are removed” from the
secret knowledge that humanity has dreamed of mastering all the years of its existence:
The wand of Hermes. Device. The principle of operation.
Electricity and heat from the ether.Teleportation. Heat ray. Vajra. Flying saucer is easy!
Time. Time travel. Levitation The Grail, the Uraboros and the Seven Seals.
ISBN 978-5-0059-3776-6
Created with Ridero smart publishing system
CONTENTS
Scientific and practical technomagic
Introduction
Wand of Hermes. Device. Principle of operation
Electricity and heat from the ether
MERCURY. VAJRA. NEW EDITION
STAFF OF HERMES. MERCURY. NEW EDITION. (03/23/2023)
Teleportation. Heat ray
Flying saucer is easy!
FLYING SAUCER. MERCURY. NEW EDITION. (APRIL 2023)
Time and Time travel
Levitation
DOME GENERATOR
The Grail, Uraboros, and the Seven Seals
EXTREME CHAPTER IN WHICH THERE IS NOT A WORD OF TRUTH
INTRODUCTION
In the economic, technical and, in general, in the scientific
community, the question of the ways of developing our civilization is
now being rather vigorously discussed. On various discussion
platforms, this question sounds something like this: “What
technological order awaits our civilization? The industrial order is over.
Now the post-industrial one is coming and developing, but it, it seems,
also, in all scenarios, will not last long.”
And there are already quite a few futurological pictures of the
development of our society. This is a “digital concentration camp” and
a rating system like in China, and the economy of consumption
according to Schwab, and the worlds of dominant corporations. There
are also worlds in which the future is like the past — all on horseback,
on flying dragons, with bows and swords — such, like, “battle
of thrones”. Sheer horror!
I have my own version of the development and formation of the
technological way of earth civilization — this is a techno-magical and
techno-spiritual way of development.
This way of life arises as a result of the natural development
of science and technology, of course, if this process is not interfered
with. If you don’t interfere, then such a branch of science as
“Etherdynamics” arises and develops, which, based on knowledge
about the Ether, inevitably leads to the emergence and development
of etherodynamic technologies, to the development of new views and
understandings of the structure of the planetary system, star system,
galaxy, universe.
And then all this, unambiguously, leads to an understanding of the
existence and role of the Creativity — to the existence of the Creator,
to the existence of his creative energies of various directions and
purposes. To understanding the Place of these Energies in the creative
process, about their physical location. And then, without a doubt,
people will definitely learn to establish a connection with these
Creative Energies, first with the help of technical devices, and then as
a final, already without the use of “technological crutches”, but only
using the capabilities, abilities and skills of their own organism.
And thus, the ethereal-dynamic, or techno-magic, mode is
transformed into the Techno-spiritual mode.
Ether-dynamic, techno-magical, techno-spiritual technologies,
these technologies are quite simple. There is nothing particularly
difficult there. In any case, at the first, primitive, stage of their
development.
But nevertheless, information about these technologies is kept
“with seven seals”, and should get to civilization only when this
civilization reaches a certain level of development. Like how we are
now. We are now well developed. In all senses. We are ready for it.
But there are situations when information enters civilization earlier
than it should. And then there is a distortion in development. And this
has already happened, and it is with our civilization.
Somewhere, a little over 1000 years ago, our civilization got
knowledge that should not have got to it. I think that for some reason,
Prometheus passed this knowledge to us. For this he was later
punished. And it started…
Without the elementary development of science and technology,
people have learned to fly with the help of anti-gravity technologies.
People have learned to replicate (copy) any objects in any quantities.
People have learned to build magnificent buildings using the creative
energies of the Co-Creators. People have learned to live long and not
get sick. People have learned to cut megaliths and move them. Yes, we
learned a lot.
It would seem — great! The beauty! But you know the little
people — their curiosity is boundless. And once someone tried
to connect the incompatible. Squeeze the unimaginable…
People learned to combine various, at first, objects with the help
of techno-magical technologies, and then they began to connect living
beings.
This is how animal people turned out — centaurs, minotaurs,
cynocephals, pegasi, griffins, etc. Co-creators-curators watched. So
what? In principle, the Creator did not reject, — it was interesting
to observe what this would lead to. And at first everything was fine. We
wanted the best, but it turned out, as always.
People let’s experiment and the tower was completely torn off.
Absolutely terrible chimeras have gone. All these dragons, but with
many heads, man-serpents, man-crocodiles. All sorts of reptiles turned
out, and then they got to the insects.
That’s it… And you thought where all these reptilians, insectoids
and other indecency come from. The Creator and his team — they
created only man. And it turned out okay. But all this rest — these are
already people who have tried.
In short, a monstrous imbalance has arisen in knowledge and
technology. I had to take immediate action. I had to clean everything
up and create a new world, the same as the old one was before all this.
This 1000-year-long stage was moved 1000 years ago. We know this
period as the “ancient world”. And it’s not ancient at all. Otherwise, how
would the buildings have survived for 2000 years? Yes, and European
ruin artists captured the ruins of this civilization perfectly. All the old
cities of the world are similar in their Victorian style. What about
Roman law? How it passed through allegedly 2000 years, and was not
lost in the dark ages.
In general, I had to urgently call in “crisis managers” — Satan and
his team. Duck, and how many years have they fucked up? A couple
of hundred years, that’s for sure. 18—19 centuries — the centuries
of the destruction of the old world and the “implantation” of the new.
Whole pieces of history had to be pulled out along with the planetary
ribbon and transferred. All artifacts of history were thrown into the
past. Antarctica was flooded with water and frozen. Cities were covered
with soil. This was necessary in order to stop the dome generators
operating around the world. The soil was taken here on Earth. The
whole Earth is pitted with quarries similar to the Grand Canyon.
They did a great job. Yes, we live in a world created by Satan. So
what? Previously, the social structure was based on collectivism,
communality, catholicity. And all over the world, the Slavs “kept the
maza”! The whole world was under the Slavs! Now individualism is at
the forefront. Personal growth, as they say. It’s not bad too. But there is
a nuance — individualism gives rise to slavery and exploitation, wars
and concentration camps. And it’s all just to satisfy the ambitions
of a few people.
All this is very carefully hidden from people. Satan brought the
Anglo-Saxons to power and taught them how to create a financial and
trading system.
And so we and they will never agree.
And now we have again come to that from which we were torn off.
We have already come by the right path, the right and natural way —
by the progressive nature of our development.
We will gradually, step by step, remove all the “seals”, reveal all the
secrets, look behind the canvas with the “painted hearth” and enter
this secret door, whose name is etherodynamics or, in other words,
technomagic.
WAND OF HERMES. DEVICE.
PRINCIPLE OF OPERATION
The Rod of Hermes is a technical device made of matter, but
working with an intangible substance, with the building material
of matter, with the elements that make up the Space-Time Grid, with
that proto-substance that we timidly, but already called ether, with its
components, which we call graviton and phonon.
If a lot of people thought about the ether, wrote, talked, talked
a lot, and a lot when, then about the forms of its dynamics, about its
place in the universe, about the universe itself, about the synergistic
structure of man, from society, and even about the beginning
of Creation — about it is not enough where and, few people told.
And so, in order to fill this gap, one of the Co-Creators (who called
himself O’Jan) sent a teaching called “Kalagiya” to Earth. The teaching
came in Russian, which means for the Russians. The Teaching was
transmitted in a channel way, through the Prophet. The Prophet
Alexander Naumkin accepted the teaching. He now lives in the
mountains in Altai.
This teaching is unparalleled in power and informativeness.
Personally, I understood only a drop of it, and as a result, I got the
book that you are reading. Imagine we understand everything. You can
move mountains. In short, study and study for many more years.
I constantly refer to this doctrine — and this is normal, it
corresponds to today’s realities and accurately describes and answers
the necessary questions posed.
Wands of Hermes, several varieties. But in its classic form it looks
like this
Here and now we will consider the Rod, which I call
“gravitational” — the Gravitational Rod.
The Rod of Hermes is a technical device that allows you
to redistribute the density of the gravitons field in space, thereby
changing the direction of the gravitational force in the local area.
At the heart of the principle of operation of the device of the Wand
is a phenomenon similar to the phenomenon that we call a gas
tornado. This is what a gas tornado looks like:
But the dynamics of gas in the atmosphere and the dynamics
of aether are different phenomena, and they are similar only in the first
approximation. With a more careful approach, differences appear,
which then become more and more significant, and, ultimately,
in general, any similarity disappears. Only a resemblance remains.
Therefore, let’s start with how “Kalagiya describes the forms
of energy movement. This is written in the 21st chapter of the First
Section of the Kalagiya:
“one. It has already been said: “The energy potential will correspond
to the degree of its compaction. Condensation of energy is carried out
by forcing it into one place, with the application of torque.
3. Rotation has two forms of motion — centripetal and centrifugal.
10. Any viable construction is achieved by the movement of a rotating
spiral of energy. Condensation of energy, that is, its injection, is carried out
in the same way. In general, any life is built by the movement of a rotating
spiral: be it energy or a substance that is composed of energy.
If the centripetal movement of the incoming energy directs the Fire
to one place, namely to the Channel of the Movement of Fire, which
achieves the discharge of the density of Time and the compaction of Matter
(Space) by this Fire, then the centrifugal movement of the incoming energy
directs the Fire into radial radiation from the Center of its movement,
which achieves the injection of density Time and rarefaction of Matter
(Space).
11. Thus, during the centripetal movement of energy, Matter (Space)
becomes denser, and the density of Time is discharged in the Center of the
Movement of Fire. In the Circle of Influence of Energy in this case the
Matter (Space) is discharged, and the density of Time is pumped up;
beyond the Circle of Influence of Energy Matter (Space) is condensed, and
the density of Time is discharged.
12. During the centrifugal movement of energy, Matter (Space) is
discharged, and the density of Time is pumped up in the Center of Fire
Movement. In the Circle of Influence of Energy in this case the Matter
(Space) is condensed, and the density of Time is discharged; beyond the
Circumference of Influence of Energy, Matter (Space) is discharged, and the
density of Time is pumped up.”
To obtain anti-gravity effects, the Centrifugal type of rotation
of Energy is used. So once again:
“During the centrifugal movement of energy, Matter (Space) is
discharged, and the density of Time is pumped up in the Center of Fire
Movement. In the Circle of Influence of Energy in this case the Matter
(Space) is condensed, and the density of Time is discharged; beyond the
Circumference of Influence of Energy, Matter (Space) is discharged, and the
density of Time is pumped up.”
Ideally, this formula describes an energy torus consisting of two
tori inserted into each other.
In this torus, “Kalagiya distinguishes three zones — the Center
of the movement of Fire, the Circle of Energy Influence, and beyond the
Circle of Energy influence.
In other words, these are the central channel, the inner torus and
the outer torus. This composite torus has charge signs corresponding
to the density parameters of the Elements that make up the Space-
Time Grid.
In the figure you can see where this torus has pluses, and where
are the minuses. Therefore, the central channel and the center itself,
the focus, where the energy diverges radially, is charged with a minus.
The inner torus, also known as the Circle of Influence of Energy, is
charged with a plus. And the outer surface, which is, as it were,
a continuation of the central channel, is charged with a minus. We will
supply the energy for the launch both to the Central Channel and
to the Circle of Energy Influence. The outer surface receives energy
from the center.
Why is there a minus, but here is a plus — don’t ask — this is the
result of experiments and research.
Now a very important point. Each zone of the energy torus consists
of two components — either Space is condensed, and Time is
discharged, or Time is condensed, and Space is discharged. And each
configuration has its own charge sign.
Space becomes denser, and Time is discharged — this is a plus.
Time is compacted, and Space is discharged — this is a minus.
Then let us clarify that the discharged Time is charged with plus,
the condensed Space is charged with plus.
Condensed Time is charged with a minus, Discharged Space is
charged with a minus.
We got two pluses and two minuses. Let’s clarify and look at the
graphics of the energy tori pattern. To the compacted minus of Time we
will add a rarefied minus of Space, and to the compacted plus of Space
we will add a rarefied minus of Time.
Gravitons are responsible for Time, and phonons are responsible
for Space.
Then, if we condense gravitons, this is a minus. Discharging
phonons is also a minus.
And vice versa: we discharge gravitons — this is a plus. We
condense phonons — this is also a plus.
And now we come to a very important fact — it turns out that the
charge by its nature is not one. There is a graviton charge, and there is
a phonon charge.
We turn the handle. The generation has gone. How the generation
itself takes place on the basis of the law of electrostatic induction,
I will not describe the mechanics itself. Explore for yourself.
So, the generation started. What’s happening? Where do gravitons
come from? They come from a jar — from a Leiden jar — a condenser.
They, these gravitons are pulled out of one jar and transferred to the
second jar. On the inner lining of this jar. Accordingly, an excess
of gravitons appears on the inner lining, and the bank is negatively
charged. In the first jar, from where gravitons are drawn out, the
density of gravitons decreases and the jar becomes positively charged.
On the outer plates, connected by a metal bridge, there is a flow from
the lining of one can to another, and the outer plates are charged with
opposite signs. This is necessary to maintain the energy balance — the
total energy density in the banks remains at the same level. And we
turn the handle.
If we stopped, then we would have two capacitors filled with
a charge up to some nominal value. If we want to release the
capacitors, drain the charges, we simply bring the spark gap balls
together, there is a sharp flow from the area with high pressure to the
area of low pressure with the release of a certain amount of Fire and
Light, which immediately go into a bound state in the phonon-
gravitonic ethereal field.
But we keep turning the knob. The capacitors are overfilled, but
generation, due to the specifics of the electroforking device, continues.
Where are the gravitons from?
Yes, from space. The arrester balls are far apart, or removed
altogether. Then, with the help of one collector, where is plus,
gravitons are pulled out of Space. More precisely, from the inter-thread
space of the Space-Time Grid. They are pulled out and transferred with
the help of a disk to the second collector. And then it is simply thrown
out of it, in the same way, into the surrounding Space.
During this period, the graviton flow moves along the conductive
elements of both collectors, the pulsation of which, moreover, is
smoothed out with the help of receiver-capacitors. From one point
of space we take, to another we transfer. The pressure difference that
can allegedly be formed is immediately equalized. It’s like taking
buckets of water from one corner of the pool and transferring it
to another corner, trying to redistribute the density of the liquid
in different corners in one pool.
If we attach wires to the ends of the collectors, continuing to turn
the knob, a flow of gravitons will flow through these wires from the
end of one wire to the end of the other, and the capacitors will smooth
out the ripple.
This is how real electrodynamics is obtained — the movement
of the flow of charges through the body of the conductor. One end will
then have a negative potential sign — it can be injected or compacted
from it. The second end will have a positive potential sign. From it we
get rarefaction, pulling out charges, reducing the density of the
graviton component of the ether.
And since it is this ethereal component that is “responsible” for
such a part of the Space-Time Grid as Time, and it is gravitons that are
responsible for the same section of information transfer, then in the
definitions of “Kalagia” we are talking about such parameters as
Density and Rarefaction of Time.
Time is condensed, pumped — minus. Time is being discharged,
density is being drawn out — a plus.
We figured out two parameters, but there are two more — Density
and Rarefaction of Space. But this is another type of electrostatics —
piezoelectrostatics. The piezo charge generator looks like this
One lighter at the end, when pressed, gives out a minus, the
second — a plus. At first I just tried to charge the capacitor with these
lighters. It turned out that this had to be done “until death”, and then
you will not achieve the result. And how will the flow of the piezo
charge in the conductor be ensured? And then came the revelation…
I suddenly clearly realized that it is possible to multiply to the
required amount, fill the capacitors, and get a positive charge flow
in the conductor using the same electric fork. She has no charge of her
own. What was given with that and works. But first it must be
completely discharged, reset. Which is what I did.
The discharger zeroed the charge of the capacitors. Then he simply
shorted all the segments with a disk to each other. That is, each metal
segment on one disc short-circuited with a mating segment on the
second disc. All segments without exception. And then he added
positive and negative piezo charges to the disks in the right place
in the right segments. Everything! Then we turn the knob and the
reproduction, filling and dynamics of the movement of piezo charges
along the conductors began.
In this case, we are working with phonons. With a positive active
charge. This component of the ethereal substance is responsible for
the formation of the grid of Space, for the atomic nucleus. Filled with
fire energy.
At the end of the wire, where the potential for charging the charge
is positive, there the Space becomes denser. At the other end, the
density of phonons is pulled out, there is rarefaction, there the Space is
discharged — there is a minus.
Thus, we have obtained two more parameters of power for ethereal
dynamic devices — Density and Rarefaction of Space.
Let’s move on to the Rod of Hermes itself.
In ancient times, such tombstones were laid on the graves of the
Russians, who owned magia and techno-magic. The drawing on the
slab is nothing but the incoming flow of nourishment to the central
channel of the Wand.
Thus, we have a two-component binary power supply system for
a techno-magical device similar to the Wand of Hermes. To do this, we
use two electrophore generators, each of which works with its own
type of charge.
Previously, when these technologies were used without problems,
electrophore machines were multi-station. At least two-post, so that
there are power outlets of a different nature at once.
Household electrophore generators were in many homes, like
Singer sewing machines.
Inside the body of the Wand there are two channels, for two power
parameters. These channels are almost straight, slightly twisted to the
right.
The snakes are made of a thick conductor so that there is enough
space on this conductor for the movement of each of the two streams.
Moreover, these streams will go towards each other — one pulls, the
second pumps. The same applies to the center channel.
At the ends of the spirals, balls are attached — the heads of snakes.
This is necessary in order to twist the incoming charge flows. Now we
draw the diagram.
You have to try both options. Feed each coil separately and feed
both coils with a combined double potential. We draw connection
diagrams.
Now let’s draw a diagram of the fields of the Rod of Hermes.
Let’s compare our scheme with the scheme from “Kalagiya”.
Everything matches.
Now the question “Why wings”? This is for control and stop. The
wings are most likely made of glass. A plus is generated from friction
on the glass. The wings are connected to the head. The head is
in contact with the channels of the central body. The center channel is
powered by a minus. Three wings or one wing — plus is fed into the
Central Channel. The center channel stops or slows down. The “Beyond
the circle” zone connected with the central channel also slows down or
stops.
The launched Rod pumps gravitons into focus, into the Center
point. This is where the compaction takes place. But the most
remarkable thing is that the Rod begins to pull an excess amount
of gravitons from Space into the Central Channel, which are
concentrated in the focus of the Rod. An excess of gravitons forms
a local zone of excess pressure in this place, which manifests itself
in the form of repulsion, pushing objects placed there out of this zone.
We observe the phenomenon of gravitational repulsion.
And this is only one kind of techno-magical device called the Rod
of Hermes.
ELECTRICITY AND HEAT FROM THE
ETHER
Our ancestors did not know electrodynamics, and therefore the
mechanical drive of mechanisms was carried out through heating
water and producing steam with the operation of steam engines. But
even in that short period of time when both concepts, both
etherodynamic and electrodynamic, existed in parallel for some time,
even then the power generators were driven to generate electricity
through heating water and producing steam. Just as it is now done
in thermal power plants. Of course, there was also hydrogenation, but
nevertheless, obtaining electricity was always associated with turning
the electric generator.
That is, what happens. Before the spark gap (before the candle), we
have an ether flow in the circuit, but in the spark gap and in the circuit
after the spark gap, an electric current flows into the Ground.
These filled neutrinos can gather in large numbers “in the back
of the head” to each other and fold into elementary particles, which we
call the electron and positron. And a proton is something other than
a large number of neutrinos filled with Fire
Therefore, when a mercury nucleus neutron decays, it decays into
a proton and an electron. The proton, if it remains in the nucleus, then
a thallium nucleus is obtained, but if the pressure is high, the proton
and electron decay. They practically unwind like a ball, like a coil,
to the state of spiral neutrinos filled with Fire and Light.
Antineutrino with Fire goes inside the crystal lattice of the iron rod,
from atom to atom, through the nuclei and through the bonds of the
crystal lattice. The light comes from outside, wrapping around the
stock. If the rod has a taper, then at the focal point these neutrinos
“meet” and release annihilation energy. In reality, there is a destruction
of neutrinos and antineutrinos with the release of Fire and Light, which
immediately, again pass into a bound state.
How to stop all this? Heat the head on the other side, around the
stem. This is the first option. The second is to launch a stream
of positive charges along the rod, but of a graviton nature. And this is
nothing but a zone of low density of gravitons, which has a positive
charge. How to do it?
Wings are a generator. And snakes are just a coil wrapped around
a rod and connected by electrical contact with the wings. Loss of wings
(for example, they are glass), generating a positive charge of a graviton
nature. The spirals of the coil receive this positive charge, which
interacts with the negative charge of the stem. There is a normal
discharge. The lifting force of gravity falls. Only phonons remain, which
we also stop, either by reverse heating, or by cooling the head forcibly
or spontaneously, or somehow I don’t know yet how …
That’s why spiral-snakes are so different. Right, left, wound tightly
or not, wound in a spiral or with “tied knots” – there is no difference!
And it doesn’t matter if it’s generator wings on top or below, for the
entire length of the stem or only part of it – it doesn’t matter! Whoever
likes it. There may be no wings at all. Suppose you have a charged
electret in your pocket, wires from it to the palms, or just a charge is
transferred from hand to hand. You take the snakes with your hands
and control the intensity of the process.
And pay attention to the tips of the spiral snakes. They are all bent
outward. Spirals do not have a pumping function, otherwise they would
be directed to the focal point.
But in the Vajra, the arcs play a completely different role. After all,
a beam is formed there – Light outside, Fire inside. And the Light, read
Space, must be twisted into a tight spiral so that the Fire does not
immediately unite with the Light and annihilate. This form of arcs
twists Luminous neutrinos into a dense coil. It turns out a light channel
filled with Fire, similar to the tubular structure of the grid, but
in a macro version.
For now, let’s skip the deformation effect and consider the impulse
effect.
Yes, the force of inertia is a very real force, which can also be
calculated. It’s just that it’s very small, but it’s still there! And this force
exists as a result of the deformation action as a residual deformation.
I was working on calculating this force in relation to a specific
example. You can read my method for calculating the inertia force
in the chapter “Inertia”.
That’s why the atom moves by inertia. It is constantly affected
by the force. And if there is a force, then we can talk about
acceleration? Yes, that’s right. The acceleration of inertia is perfectly
calculated, just like the force of inertia, it is very small.
The threads of the grid and the etheric substance are involved
in the formation of the channel itself during Teleportation. And the
Teleportation itself is carried out by the Spirit field. But not by the
Creator himself, of course. He has a team of various forces, helpers, Co-
creators there — a whole legion of them. So, there is someone. The
pressure in the Spirit field is enough to keep the atom from collapsing.
This field also keeps the channel itself in a usable state.
All right, then. Here we have formed a channel. We launched an
item there. A brick, for example. Just pushed it to the center of the
channel. To enter. The brick received an initial impulse, entered the
channel, and began to accelerate under the influence of the gradient
field. Overclocked, and what? How-to slow down? Some kind of railgun
turns out.
And there’s no way to explain it. The form is important here. Like
this.
Now we can talk about the most technical device for teleportation.
Futurologists, for the most part, roughly correctly imagine the
process of teleportation. They call this moving using a wormhole
in Space. This wormhole is depicted as something like this
To represent this, one way or another use graphic lines so that you
can show the curvature, compaction, and the hole itself in the grid
of Space. Like it or not, the brain itself depicts space in the form
of a grid, and in order to form a channel in this grid, the brain bends,
forms, and compacts this grid accordingly. That’s right. It can’t be any
other way. Consciousness is rebelling with all its might against the
attitude that there is only emptiness, there is no ether, but something
bends and causes gravity, given out by mathematical formulas of the
Theory of Relativity.
To do this, we return to the Kalagia again. “Kalagia” considers two
types of rotation of energy, in order to control this energy, under
different spatial constructions.
In the Wand of Hermes, if you haven’t read it, be sure to read it, we
used the Centrifugal Type. This is when energy, when it is released,
from the center “runs away” in a radial direction from it. This type,
when applied to the design of the Wand, can be of two types,
depending on the power sign of the Central Channel and the Circle
of Energy Influence. And thus, we can produce two types of Hermes
Rod, applied to the use of a Centrifugal type of Energy rotation.
One type of power supply of the Rod allows you to get
gravitational phenomena, the second type of power supply is suitable
for obtaining heat and electricity directly from the Ether.
In order to create a channel in space, Rod technology is also used,
but a different type of energy management is used-a centripetal type
of energy rotation.
In “Kalagia” it is said that in this type, the released energy is
directed to the channel of Energy Movement.
Thus, to form a Channel, which we could try to use for rapid
movement in Space, is also formed by the Wand of Hermes, but
of a slightly different design.
This type of Wand uses a Centripetal type of Energy Movement,
which in” Kalagia” sounds like this:
“Thus, with the centripetal movement of energy, Matter (Space) is
compacted, and the density of Time is discharged in the Center of the
Movement of Fire. In this case, in the Circle of Energy Influence, Matter
(Space) is discharged, and the Time Density is pumped; behind the Circle
of Energy Influence, Matter (Space) is compacted, and the Time density is
discharged.”
This is what it looks like for both types.
These are classical energy tori (classical to my imagination). For
a centrifugal Baton, it looks like this. You already know this picture, but
then it was not quite complete, then the emphasis was on the topic
of nutrition.
Knowing the logic of the design of Wands, we construct a Rod for
the centripetal type.
First of all, the Central Channel. In the case of a Gravity Rod, it
consists of almost straight channels-guides that are completely,
slightly twisted.
The Rod we need has a channel consisting of a coil wound from
turn to turn. But this coil is two-way.
Why two-pass? Yes, because technomagic devices use a binary
principle of design and construction. You’ve already guessed that this
Rod, like the gravity type, uses a two-component power system. Power
is supplied from two generators that produce power potentials
of similar signs, but of different nature. Therefore, one run of the coil is
powered by one generator, the second run is powered by a generator
with a potential of a different nature.
And this coil is powered by plus. That is, if we apply a minus to the
gravity Rod, then we apply a plus to the channel Rod (let’s call it that).
Now the snakes are spirals. Spiral snakes are needed to form
a Circle of Energy Influence. This circle looks like a torus. This torus is
needed in order to hold the formation of the central channel.
In a gravitational Rod, this torus holds a cone of energy within it. In the
channel Rod, this torus also holds a cone, but it will be a forming
channel.
As a rule, this coil, in its contours, has the shape of a cone.
A truncated cone. This cone can be anything, depending on the task
being performed.
Spirals of this type of Rod are twisted to the right. The power
supply is also of a binary type, but from the negative poles of the
generators. In the end, we will have such a design, with a channel
of Fire inside.
Well, you can see for yourself. This is a slightly different principle.
It uses braking, compaction, and an acceleration loop that sets the
initial acceleration of the fire flow before entering the second cone.
By the way, these arcs of fencing are spiral snakes, but only
straight ones.
The fire channel can look like this
But the Light Channel is used for teleportation.
To do this, the channel Rod simply changes the power signs
It should be something like this. The drawings are pulled from the
Web, but in principle the understanding is correct.
Here’s a nice picture. Almost correct:
But where does this light come from? The coil uses the etheric
substance to form a channel and directs free etheric flows along the
channel walls in the form of a boundary layer. It turns out that the rest
of the coil space will be empty — but this can not be. The free space
of the coil is filled with Light, which is drawn out, sucked out of the
gravitons. There’s just nowhere else to go. This is one of the
components of the Eternal Spirit — it is its thinking substance, with the
help of which everyone thinks, including us.
In the Kalagia, it is said that Thoughts are Light coming from
a point in Time into the Future. That is, all our thoughts go through the
channels of the time grid from the future, forming our behavior. And
we also know that the End has a monopoly on all Thought-creation.
This means that thoughts can be transmitted using the generated
light channel. But there are questions: “How, where, and to whom?”
How — using the channel system
To-to the switchboard, which is located in the Galactic Center.
To whom — “telephone operators” with an indication of the
subscriber.
This is how you can and should contact the Co-creators who are
there.
But Fire is the very Consciousness of the Creator. The second
component of the Eternal Spirit. And this fact can and should also be
used.
We will definitely learn…
FLYING SAUCER IS EASY!
Once upon a time — it was already a long time ago-in 1999,
I already posted material with this name on the web. This has been the
result of my thinking since 1996. Then, of course, it turned out that the
solution proposed in the material does not work. But the response was
strong then. Even the Americans got excited and called me to work.
But then you can see they counted, thought about it, and quickly
deflated. And thank God, otherwise the hell would have happened. And
the material is still hanging online at: shamala.chat.ru. Apparently,
these are some archival materials. Because I haven’t been able
to administer at this address for a long time. Yandex. Mail doesn’t work.
Search engines don’t index the site. Someone kind, apparently, saved
the material purely for history. So thank you to the kind people. By the
way, for those who are interested, this material is also published on the
website of my” Chronodinamiki…”.
I started with this material, and I need to finish the same. It will
look very symbolic.
Gravity technologies were already used on our planet by our
ancestors. This technology was called the Wand of Hermes. The
technology is based on the principle of operation of a technical device,
which we call the Wand of Hermes. The principles of operation of this
device are discussed on the page of the site “Chronodynamics or real-
time tracking” in the chapter with the appropriate title.
In part, I have dealt with the use of Wand Technology by our
ancestors more than once, in different chapters. Let’s run through it
briefly.
Individual aircraft. This is the Rod itself, which was a long staff,
straddling which you could fly. It looked like this.
“Flying on a stick” — as for me, duck is quite scary. Therefore, they
began to fence something like a cabin. It turned out to be a “stupa with
a broomstick”. But this is also not very good.
Then they made a platform, on which they fixed four Wands and
connected them with movable hinges on the principle of a swinging
trapezoid, for ease of control. It turned out to be a “magic carpet”.
But the platform is also not a very convenient thing. The fact is
that moving in the gravitational field of the planet with the help
of gravitational engines is somewhat similar to swimming on water.
The gravitational field is equipotential. And so, if we provide
gravitational repulsion by using a point action, we must observe the
absolute synchronicity of this action. Otherwise, our design becomes
very unstable. For example, if a quadrilateral platform has one
generator that does not start working with the calculated potential
that is needed, then such a platform will simply turn over very easily.
This means that by controlling such a platform, the operator is forced
to clearly synchronize all its actions with the operation of generators.
This includes work on the slope of the trapezoid, footwork to move the
body along the surface of the platform, and the body slopes
themselves. In short, it’s like windsurfing. That’s why they called it
“carpet”. Moving and maintaining balance on the” carpet” is not such an
easy task.
For this purpose, the platform was upgraded and received this
design:
Solving this problem is exactly the same as solving this problem
on sailing yachts. By shifting the center of gravity. A kind of four-sided
pyramidal keel with heavy ballast inside was simply attached to the
gravity platform from below. And such a platform began to have
perfect stability.
But here’s the problem. What should I do with landing? Sitting with
the top of the pyramid on the surface is, to put it mildly, not very
convenient.
And then they decided not to bother much and began to build just
landing wells. They have survived to our times. They look like this
This is all great. Great. Because it’s all primitive. Simple and…
corny. But we can’t “ride pyramids"through space. Octahedra — they are
good for moving in the current gravitational field. In the field
of a planet, satellite, or star. But in outer space, that’s no good. More
precisely, you can, of course. But it is primitive, non-technological,
inconvenient, difficult, and dangerous. In short, a spaceship needs
to be built at once so that it is suitable for solving all tasks. It looks
like this
This form is universal. This form is obtained as if by “stretching” the
circle of influence and the spiral arms of the Rod into the shape we
need. In this case, this form is called the “pseudosphere”. This is what
the spiral arms of this design look like.
Four sleeves are shown. But there may be more. Six. Eight, etc.
The energy loop that the etheric streams make only looks like this
in the drawing. For a vertical plane, this is really a loop. For
a horizontal plane — it looks like this.
Eventually, on the march, this loop is transformed into an energy
torus
And it was possible to “stretch” the Rod into the shape of, for
example, a sphere. Or, just by increasing the size, get the shape of the
ship, which we call “cigar”. This is the simplest, because making
a cylindrical tube is nothing easier than forming, for example, a sphere.
Management is a separate topic, but I think it is mostly solved
in the same way as on our rockets and satellites. Small pulse
generators work. We have shown only the main structure in the
drawing. The controls, of course, are not shown. Yes, they also need
to be invented. You can, for example, control the local impact on
individual spiral arms. Sensors for taking information are located at the
entrance of the field to the body of the structure, somewhere in the
area of the dome.
By increasing the potential of the force field, you can close this
field and, continuing to pump up the energy density, strengthen this
field. Then this ship can perform the function of a “Time Machine”. It
forms its own space-time, which protects the structure and the living
organism.
But then you also need to know “where these roads are located”,
which allow you to move through Time. After all, our primitive ideas
about the structure of the Cosmos have nothing in common with its
real structure.
There is one more point. In fact, there is no such thing as
gravitational attraction. There is only gravitational repulsion in the
gradient pressure field of the ether component. Therefore, it would be
more correct to say — “gravitational attraction”. Creating artificial
gravity on board a ship is a simple task. Here, only the generators
of this field are located on the ceiling, and not in the floor, as
futurologists think. The body on board the ship is actually being
pushed from the ceiling to the floor. And the modules that are “sewn”
on the ceiling look something like this. This is a base with many
microstaffs implanted in the base.
Do you know what surprises me the most? That it is, by and large,
no one needs. No one is interested in this. No… of course, all sorts
of morons-envious-these are above the roof, these “the upper room is
full of people”. But those who should be interested in this by all
accounts-these are not… It’s scary… Why “wake up famously while it’s
quiet”?
And, probably, they will no longer exist…
FLYING SAUCER. MERCURY. NEW
EDITION. (APRIL 2023)
Due to the fact that new inputs have appeared, the topic “A flying
saucer is simple!” should be edited.
Changes are being made in connection with a new understanding
of the principles of operation of the gravitational Rod of Hermes,
associated with a new understanding of the role of mercury and a new
understanding of the principles of the mercury engine.
About mercury itself and its properties, in relation to the
gravitational Rod of Hermes, be sure to read in the chapters “… Vajra.
Mercury, Wand. Mercury… New edition…”
A flying saucer – it is, in principle, arranged simply. This is some
closed cavity with a Rod, in the form of an engine located in the center.
This is such a large “tin can”, in which the main engine is located
along the central axis.
The principle is shown here. Instead of snakes, one solid metal
cone. Spiral snakes, which the Wand has, are needed for control,
because the operator controls the wand like a joystick. At the plate, the
control is carried out differently. Sort of like separate mini Wands for
stability purposes, turns, turns, rolls, etc. Here in the figure this is not
shown, since these are already subtleties, the task of elucidating which
is not before us today.
Such a dish is needed for movement in near space. Let’s say within
the solar system. But for deep space travel, the apparatus must be
more versatile. He must be able to move both in Space-Time and
outside it – in Vidzhl-Space.
Here are the pics. They are more or less true.
These containers along the perimeter and along the perimeter
of the dome are vessels filled with mercury.
And here, with such a scheme, the entire surface of the ship is
already working. Not individual narrow cones of wands, but the entire
surface. And then the energy of neutrino fluxes is not concentrated into
a point, but, on the contrary, diverges in a spiral along the surface,
expanding to the boundary of the circle. Here is an approximate top
view.
On the lower surface, the flows from the upper surface loop and
move towards the base, leaving the circumference of the base and
moving in a spiral rotation towards the focus point, where the energy
contained in the neutrino and antineutrino flows is released.
The number of balls is slightly mismatched at the top and bottom.
Well, do not want to redraw. And just as clear…
The main engine, located along the axis, has the same function as
in the variant described above.
The diagram will look something like this. Sectional side view.
When we need to move around in Vidzhl-Space, our own Space-
Time is created around the ship.
I just don’t understand why in the pictures the balls-containers
with mercury are outside, right “on the street”. It would be nice to hide
the whole thing.
The figure shows the principle of signal transmission from one link
to another.
How to find out where to observe this middle planet. Where to see
the second Sun, the second Earth?
I will try to tell you simply, but in as much detail as I can.
In “Kalagia” it is said that galaxies look like regular hexagons.
You can’t get such a hexagon out of an ordinary spiral.
We said above that the information flows of time go like this
Moving out of the center and in a spiral, they move to its end. But
there is also a direct connection to the Center, directly from the ribbon
plane, and there is also a connection along the galactic plane. We
showed earlier, above, how information is transferred from one link
of the binary star-planetary system to another link. But there is also
a second such spiral, which, as you have already read, is one of the
zones of similarity. If we live in a negatively charged active zone, then
the passive one looks like this, and is positively charged.
Now, if we take six such spirals of star-planetary systems and
connect them, then the spirals of circles will take the form of spirals
of squares, and the galaxy itself will take the form of a cube —
a regular hexagon
Star systems “in their lines,” as the Kalagia says, become
pentahedrons. And these are nothing but pyramids. The field of tori,
each individual galactic plane, is extended to the center and thus
a pentahedron — pyramid is formed. There are six of them, and they
make up a regular six-sided cube of the galaxy.
The cubes line up in a metagalaxy. It looks like this
At the very beginning, I quoted the thesis from the Kalagia that
Time is just an extension in space. And you probably already
understand that the picture we are showing, which claims to be a Time
structure, is nothing more than just a model of Galactic Space, where
you can enter repeated pictures of planetary periods, with landscape
information and a wave of Life plotted on it.
An interesting picture is drawn by the Vedic concept of the world
order. This is how beautifully the wave of Life is depicted, namely, the
wave of human life.
And this is how the Vedic concept shows the god Vishnu and the
planets of the solar system. Notice that the umbilical cord extends out
of Vishnu’s stomach and goes up. Earlier, in earlier images, that is,
in earlier editions, all the planets of the solar system were impaled on
this umbilical cord. This meant that all the planets were connected
to each other through the poles by a single connection. And it was the
correct image. Now the situation has changed, and the image has
become like this.
Back to the topic of moving. There are four main types
of movement.
1. We move through Time, but remain in our own Space.
2. We move in Space, but stay in our own Time.
3. We move both in Time and Space.
4. We move outside of Space-Time.
All this you need to know and distinguish in order to learn how
to move in each way. And this, in turn, is necessary to know and
understand, since it is necessary to realize that moving on new physical
principles is fundamentally different from moving in the old-fashioned,
mechanical way. And to fly God knows where, with the help of new
technologies-this is a simple matter. It is important to go back to your
own Space and Time.
The first way is to move in Time, but stay in our own Space.
In short, it means moving your space in time.
This can be done in two ways.
The first is simply moving around the planet. We know that on the
largest planetary belt, the phase shift over time of neighboring
periods is
This means that in order to shift to our planet for one hour.
N= (60minx60 sec): 4. 093x10^-3 = 879550 revolutions. Not too
bad, right?
Moreover, it must be done at a huge speed, at least at the speed
of time. And this is much more than the speed of light. A flying saucer
has such capabilities without any problems. But to move at such
a speed, even at a high altitude, where there is no air resistance, this is
not a suck somehow… But still.
We made such a huge number of revolutions around the planet and
moved only for an hour. It won’t be enough. This is not very
convenient, do you agree?
You have already noticed that we are not talking about any time
machines at all. It’s not working yet.
Moving in Time is usually always moving in Space, but with
knowledge of the changes that occur in time, along with moving
in Space. Therefore, the first way to move in time was to move in the
space of our planet, or simply to fly around the planet.
There is still a way to move through Time, but stay in your own
space, on your own planet. All civilizations use this method. Because
it’s easier and faster.
This is a way of moving through the poles of the planets.
All planetary belts of planets that are in the same plane, their belts
are located and move next to each other. And in the planetary plane,
they are arranged in the same order as we place them in our
heliocentric model. After the Sun, Mercury and so on all the way
to Pluto, then satellites and satellite groups.
But let’s take a look at our Land. Earth is located between Mars and
Venus.
First, we will show what the spatial grid graph near the pole looks
like for the equinox state, for the state when the pole is always
illuminated, and for the state when the pole is always darkened.
This is what the feed looks like in summer and winter
We see that the pole is not just a plane. The pole has its own space
and structure, the peculiarity of which is expressed in the fact that the
Sun shines over the pole. And this Sun doesn’t look like ours. It always
hangs over the pole. But to see all this, you must first get into the
space of the pole. We can’t do this mechanically from the surface of the
planet. On the surface of the planet, the plane of the pole collapses
into a length of several microns. More precisely, this plane is folded
into an axis with a diameter of 6.8 microns.
But as the height above the surface increases, as we move away
from the surface of the planet, the pole opens up and becomes a fairly
decent diameter, so that we can get there
We take off on a plate above the surface. We fly to the pole and
watch. We see the open funnel of the pole. And we dive into the
interior of the pole.
Being inside the pole, we will have two options.
1. Either move along the planet inside the pole
2. Or move to the neighboring planet.
Consider the first option
To fly into the pole so that our native Sun was behind us, so that it
shone in the back. Flew into the pole-ahead and up will be the second
sun of the pole. We turn around our own axis (if of course there is
a need). We fly along the ribbon of the planet so that the Sun of the
pole is always exactly on the side. Here the question arises from which
side? To do this, you need to know a simple thing, which neighboring
planet and from which pole is located. To put it simply, what pole is
the entrance to Mars, and which pole is the entrance to Venus?
The movement inside the pole is much faster. And not at times —
by orders of magnitude. And then time travel will be more efficient.
The exit from the pole is performed in reverse order.
Thus, we move through the Time of our own planet. Speed for
movement, travel time and other parameters are set experimentally,
and in the future, based on experimental data, we learn how
to calculate these parameters.
Consider the second option. This is the case when we stay in our
own time and move in Space. It’s just moving through space, but
staying in our own Time. This is the same thing that we are doing now
by sending and moving our planetary spacecraft.
But the flying saucer moves in a different way, as opposed
to mechanical. Therefore, you can probably move around, focusing
purely visually on some external reference objects. But still, the way
to move through the poles is more efficient.
Everything is the same as in the first case. We fly into the pole.
Native Sun behind, ahead of the sun of the pole. We are moving
towards this sun. So that it passes over your head and stays behind. We
skip the interpolar space. We go to the pole sun of the neighboring
planet so that it passes overhead. Ahead, on the course of the Sun
of the neighboring planet will open, we fly to this Sun and find
ourselves in the space of the neighboring planet. We return in the
opposite way.
It is possible that the pole sun of neighboring planets is one, and
then it just has to pass overhead.
So, through the poles, we get to any planet in the solar system. It’s
the same with satellites.
Now move through Space and Time. Also through the poles.
The reader may ask the question — all the poles and poles, but
what about our native Solar system. It should be understood that
planetary systems do not have many entrances and exits. Mechanical
space — everything rests on the middle planet. That’s where the
Voyagers go. More precisely, they almost do not fly, they slowly turn
around to, someday, and leave the Solar system.
Near the Sun is a spacewalk. We’re going to Mercury. We go out
in the Space of Mercury. We fly to the Sun and see the opening starry
picture. This is outer space. You can fly directly to the target.
Between the poles of the planets is a zone in which there is no
space-time grid. This Is A Widget Space. Timeless. What is this area
filled with? It’s hard to say. Most likely corpuscular ether. Or maybe
there is some special substance. Or maybe it’s just pure Spirit. Anything
can happen.
To move in this type of space, you need a special ship. He must be
able to close the lines of force around him, forming his own Space-
Time, so as not to disintegrate into components.
“Kalagia” shows how a person can move with the help of a Widgel
Space.
This is done using the body’s own capabilities. But it is also
possible with the help of technology-this is my opinion. Management,
as well as Consciousness. The ship might look something like this. It
uses the principles of building the Wand of Hermes for teleportation.
You can, in general, wind up a coil, wind a snake-spiral, go inside
and start this device. Maybe you’ll get your own Time Machine. We do
it in the garage, on the knee. Mind Control. How is a separate topic. We
read “Kalagiya”, there is a lot of things written there. This is movement
outside of Time and Space.
Through the pole, you can get inside the Earth. What’s in there?
Don’t know. But there may well be living conditions there. And the
effect of feeling Space-Time will be such that it is perceived as being
on the inner surface of a giant sphere, and the Sun is suspended in the
center. Complete comfort. We’ll fly down sometime and see what’s out
there…
What we have described here is moving through Time and Space
with the help of devices that are spaceships. But you can also move
with the help of teleportation devices. All the principles and
conditions — they will be similar, only instead of a ship, a channel is
used for teleportation. This raises a lot of questions. For example, how
to direct a channel to a pole if the pole on the surface has a diameter
of about seven microns. So the channel needs to be lifted up, bent
to the pole, directed to the neighboring planet and provided and
equipped with access to the surface of the planet. The whole thing. But
everything is solved.
Well, that’s something like this… You need to learn, learn and learn.
LEVITATION
There is a need to highlight this issue as well. Because it’s
important. This is perhaps even more important than the “flying
saucer” theme. Because this topic directly concerns the capabilities,
abilities and abilities of a Person. And the ability to levitate is, one
might say, the main psychospiritual skill of a Person, having mastered
which a Person can easily master teleportation, replication, creative
construction, and other useful skills that turn an ordinary person into
a magician and wizard in the image and likeness of the Creator.
What is Levitation? Levitation is the ability to overcome
gravitational attraction, using the internal capabilities, abilities and
abilities of one’s own body, both inherent in a Person initially, and
obtained and developed as a result of psychospiritual and physical
training.
Obtaining the levitation effect by a person is carried out by forming
vortex etheric fields around the human body. The structure and
configuration of these fields is exactly the same as the structure and
shape of the fields formed around the technical device that we call the
Wand of Hermes.
Therefore, by understanding how and what fields are formed
around the Rod, we can, by forming exactly the same fields around our
own body, get gravitational effects (read “levitation”) without using the
generating technical devices themselves. This is the beauty of the
divine qualities inherent in a Person.
The beauty of them is that once a person has studied the operation
of technomagic devices, he comes to the conclusion that all these
technomagic devices are nothing more than “technical crutches”. And
suddenly, one day, the realization comes that, using the capabilities,
abilities and skills inherent in a Person’s Butt, you can get all the same
advantages, but already throwing these “technological crutches” aside.
Drop them and forget them, and never come back to them again.
The main tool when working with etheric fields is our Imagination.
It is the imagination, being, to some extent, a psychospiritual tool, that
allows you to control the etheric fields, obtaining the same
configurations as in technical devices, but no longer manufacturing
these devices.
That is, the work of the Imagination consists in directly modeling
the forms, configurations and dynamics of the etheric fields, using only
their thinking skills.
Thus, having formed around our own body the same configuration
of etheric fields that is formed around the technical device of the Wand
of Hermes, we can expect to receive the same gravitational effect
affecting the human body as from the use of the Wand.
It would certainly be great if you could find a teacher and learn
from him. But, unfortunately, there are no such people now. Once they
were, of course, but now they are not. Therefore, we will have to go
through this path ourselves, calling for help only the teaching
of “Kalagiya”, hope for the correctness of understanding, and faith
in the Creator.
So let’s start, as always, with “Kalagia”. Here below are the theses
that I chose from the teaching, and which, in my opinion, explain and
help to master the levitation process.
“20…
3. I will say again about the Fire of imagination. Imagination is
a special work
of the mind, modeling; and the Fire of imagination is a quantum
of Fire released from
the energy “imagination”. Fire does not necessarily have to be
accompanied in its
manifestation in Matter by images of what is presented or sensations
of what is perceived.
These latter may not be presented to Consciousness by the mind and
senses in the Fire
of imagination, but, nevertheless, the Fire will be revealed as
impersonal, but
imbued with Information, as a pure kind of Fire, the color of red
gold and
flowing blue.
21.
1. It has already been said: “The potential of energy will correspond
to the degree of its
densification. Compaction of energy is carried out by pumping it into
one place,
using a rotational moment.”
This pramon should be expanded, then the amon in the process
of understanding will become
Tarot — a guide to action.
5. Under the action of the translational movement of Thought, with
a concentrated perception of its movement, the centrifugal movement
of incoming energy is carried out, and, accordingly, the injection of the
density of Time, but the discharge of Matter (Space).
7. In this way, we can obtain two types of energy: the energy that
discharges the density of Time, but compacts Matter (Space); and the
energy that pumps the density of Time, but discharges Matter (Space).
In the first case, there is a transmutation of the existing state
of Matter — Space) — an organism, for example, an increase, accumulation
of qualities due to the deepening of the process of metabolism and energy.
This will be the realization of the desire to live long. In the same way, the
physical immortality of the organism is achieved if Secondary Matter is
introduced into the Channel of Movement of the Centripetal Fire
of Thought: in the human body — “linga-shariram”, namely fluids.
In the second case, the perception of Spatial Information is achieved,
which is voiced by the Time-Density Pressure Source. This Spatial
Information is a Message in the chain of the Cosmic Hierarchy; it originally
comes from the Eternal Spirit. This is how the expansion of Consciousness
to the cosmic quality is achieved. In addition, this way increases the Ability,
Ability and Ability to follow the chain of position of the Cosmic Hierarchy.
In the same way, levitation and transition from one World to another is
achieved, according to one’s own conscious desire, again, if Secondary
Matter is introduced into the Channel of Movement of the centrifugal
moving Fire of Thought.
10. Every resilient construction is achieved by moving the rotating
spiral of energy. Compaction of energy, that is, its injection, is carried out
in the same way. In general, all life is built by the movement of a rotating
spiral: whether it is energy or matter composed of energy.
If the centripetal motion of incoming energy directs Fire to one place,
namely, the Channel of Fire Movement, which is achieved by discharging
the Time density and compacting Matter (Space) with this Fire, then the
centrifugal motion of incoming energy directs Fire to radial radiation from
the Center of its movement, which is achieved by pumping the Time density
and discharging Matter (Space).
Both of these cases should be considered in relation to the Center
of Fire Movement, and not to something abstract.
12. During the centrifugal movement of energy, Matter (Space) is
discharged, and the density of Time is pumped in the Center of the
Movement of Fire. In this case, in the Circle of Energy Influence, Matter
(Space) is compacted, and the Time Density is discharged; behind the
Circle of Energy Influence, Matter (Space) is discharged, and the Time
Density is pumped.
13. The more concentrated the Circle of Energy Influence, the more
expanded, deepened and intense the actions occur in the Center of the
Movement of Fire and outside the Circle of Energy Influence.
14. In both cases, the movement of Thought is carried out by a spiral
rotation of its concentration in the Circle of Energy Influence; the
movement of Fire is carried out in the Center of Its Movement;
Consciousness is always distributed behind the Circle of Energy Influence
and observes in the direction of inwards.”
Now we need a basic picture, which we will use to facilitate the
explanation and understanding of the construction of the levitation
process. The person who drew this picture, this person knew his
business. He knew exactly what he was portraying, because only
a knowledgeable person, a practicing person, would be able to depict
the levitation process so accurately with all the significant details
What we see is a man with wings. My legs are weird. And two
Snakes. The legs are twisted into the right screw, and the snakes are
twisted to the left. Both the legs and the snakes converge at the same
point of focus.
Now you need to color this picture, as in a children’s coloring book,
and comment.
Now we read the comments and constantly look at the above
theses from “Kalagia”
First of all, to obtain levitation, a centrifugal type of energy
movement is used.
That is, the energy diverges radially from the Center of Fire
movement.
Now we take this thesis in full:
“Thoughts are the Light that flows through the channels of Time
from the point of time to the Future,” says the Kalagia
That is, we mentally rotate the light on the surface of the snakes
from the point of focus upwards. More precisely, it is not done entirely
out of focus. In focus, we pump gravitons along the spine (more on this
below).
Snakes, with the help of imagination, seem to grow out of a small
light wheel that rotates around the focus point. Here from the “central
hub” of this wheel and grow snakes, two pieces, rotating around the
body clockwise, if you look at these snakes from top to bottom. The
wheel, respectively, also rotates clockwise when viewed from above.
This wheel has a rim from which, as it were, the spokes extend to the
center, which then change their direction and become snakes,
stretching vertically upwards in their spiral rotation around the human
body.
This is where the process of constructing the desired configuration
of psychic fields begins.
First, we build a wheel. From the Light of a bright blue color. We
turn the light — we get the wheel rim. The rim is wide, thick, and
dense. Two thick spokes come out of it. Bending in the course
of rotation. The spokes connect to the small wheel in the center. It
turned out to be a Light Chakram. Then these spokes, in the form
of two light snakes, grow out of the central wheel and rotate around
the body clockwise around the body, moving up.
We bring the snakes approximately to the level of the solar plexus,
and then the rotation of the snakes continues in the horizontal plane
in the form of an expanding spiral. Snakes rotate along the trajectory
of an expanding spiral, and gradually, as it were, go in a horizontal
plane into space, losing their intensity and brightness.
The largest and brightest density is at the beginning. As you move
up, and when you move to the horizontal plane, the brightness is lost
to the state of disappearing haze. This is how we see the dilution of the
time density, in Rod terms.
All the rest of the Consciousness that observes in the direction
from outside to inside will be completed independently.
Let me remind you that the entire monopoly on all Thought-
creation is in the Creator’s Mind, of which you and I are a part.
That’s not all. But half the battle… Now let’s take a closer look at
what the Kalagia says.
“In the same way, the physical immortality of the organism is achieved
if Secondary Matter is introduced into the Channel of Movement of the
Centripetal Fire of Thought: in the human body — “linga-shariram”, namely
fluids.
In the same way, levitation and transition from one World to another is
achieved, according to one’s own conscious desire, again, if Secondary
Matter is introduced into the Channel of Movement of the centrifugal
moving Fire of Thought.”
It is important. Here, as it were, differences are introduced. Or
Secondary Matter, and if the human body, then fluids.
Actually, Secondary Matter and fluids are the same thing. In other
words, this construction can and should be carried out first on the
sidelines. And the last stage of construction in the center of the
movement of the Fire is introduced two Light streams, twisted by the
right screw. In the Wand of Hermes, this is the Central Flow.
Then it is not superfluous to clarify about primary, secondary, and
tertiary matter.
Primary matter is Light and Fire in the form of granules of phonons
and gravitons. In the expanded form, when they are already used
in some constructions, such as a space-time label, a flow
in electrostatic circuits, conducting energy waves in electrical circuits,
that is, when tori-energy granules spread out in a spiral are lined up
to build and implement some tasks-this is secondary matter for us.
Tertiary matter, when these spirals curl into granules of atoms.
And thus, two fluids, these are streams of Light twisted in spirals,
and then in bundles, but with a higher density — this Time is being
pumped — gravitons are being pumped into the Center of Fire
movement. And then from the center there is a radial outflow of energy
in the form of a Fiery Chakram of the color of Red gold. I drew it
in yellow. Rotation of the wheel is also clockwise.
When such a construction is performed correctly, then such
a construction can lift and transfer weights. And the Consciousness at
the same time controls the Imagination and observes in the direction
of “inwards”.
Now, as for the location of this spatial construction. I said it was
in the solar plexus area. But in reality, for the purposes of training, you
need to start forming this spatial structure somewhere on the
sidelines. And the proportions of the entire building can be changed
depending on your desire.
And only then, after training, you can take on and transfer yourself
to a loved one. You apply it all to yourself. And Light streams — there
are two of them-are fluids. They like wings enter the body in the area
of the shoulders, go further into the legs and then curl into the Center
of the Movement of Fire.
Any spatial construction should be accompanied by a mantra.
In our understanding, this is just a certain chant. It can be anything,
even absurd and meaningless. Chanting sets the rhythm of the
imagination, and in the future, just the mention of this chant in the
mind becomes a trigger for launching the desired process. And then
this chant becomes a spell. I said it and everything is ready. Everything
is spinning and working, and you don’t need to go through all the
stages of the process again every time.
If everything is done correctly, the Person should levitate — rise
above the surface.
There may be something wrong with this description, but that’s
exactly what “not quite” means. In general, everything is correct.
DOME GENERATOR
As recently as a little over a hundred years ago, dome generators
were a ubiquitous, traditional and self-evident phenomenon.
The main purpose of dome generators was to provide people with
light and heat. They worked in parallel with electrodynamic
generation. And Russia was perhaps the last country in which this
energy technology was used in the 20th century. But Lenin and his
comrades came…
During the war, Stalin and Beria used this technology and wanted
to further develop and apply it, but they were not given it.
The mechanism of etherodynamic generation could be used in any
temple, due to some features of the dome design. But, nevertheless,
special high-rise buildings were built, which we now call bell towers.
Inside, these bell towers, of course, do not have interfloor ceilings.
The floors are made with high window openings without glazing. This
is necessary in order to ensure the free movement of ethereal flows
inside the building.
By design, the dome generator is neither a centrifugal nor
a centripetal generator. This is a separate type of construction – it
belongs to the toroidal type generator.
The dome generator introduces an electrostatic field into a closed
toroidal vortex motion. We know that electrostatic field lines are
always open. You need to make them closed.
It is interesting that we will launch only the negative component
into a closed vortex motion, closing it on ourselves. The process is
somewhat similar to the centripetal type of movement. It starts like
this:
Next, we should get something like this
The start of such a generator is carried out from an electrophore
generator. Necessarily multi-post and quite powerful. This is not
a school physics lesson.
Generators, like the Rod of Hermes, are designed to concentrate
any of the two ethereal components, and then give this component the
necessary form of further movement. It turns out either a point
of gravitational repulsion, or a point of high temperature, or a fiery
channel, or a luminiferous channel.
In this situation, at the dome generator, the task is not
to concentrate, but to introduce a large volume of the ethereal field
into a dynamic configuration, i.e. these generators make the ethereal
masses move along a certain trajectory. In this case, this is a toroidal
trajectory with a toroidal vortex of a double, binary form.
We, in this case, do not set the task of concentration, but we set
the necessary dynamics and shape of the trajectory of the ethereal
mass.
This is also done using a powerful electrostatic generator.
In electrostatics, the lines of force are always open – you remember
this from a school physics course. We will make the trajectories of force
lines closed, and even set the dynamics.
We will work only with gravitons. A phonon generator of this type
is for other tasks. With the help of a graviton dome generator, as
mentioned above, we receive light, heat and, most importantly, heal
our body, realizing the desire to live long.
“Armed with theory”, we will simply build this generator “first on
paper”
Let us take as a basis the design of the Rod of Hermes of the
centrifugal type. We take the central guides. And let’s take them in the
amount of four pieces, and not two, as in the classic Wand:
Now let’s attach to the central channel of the spiral-snake of the
circle of influence of Energy. We will also take four of them instead
of two. And let’s make them straight, not twisted:
It remains to attach the divider ball. For the classic Wand, it is
installed at the entrance to the central channel. We’ll put it on the way
out. The question is why? We do not need the concentration
of gravitons to a point. We need to first bring the graviton flows into
a dense parallel beam, and then separate them in order to get the
central channel of the toroidal formation. Therefore, in the place of the
intended focus, we put a divider:
Now let’s rotate what we got 180 degrees.
Voila. Here is a diagram of a dome generator.
All dome generators had approximately the same design.
The central channel is four tires in the form of a pyramid and one
feeder in the center. An active negative potential was supplied from
the central power supply from the ground.
The return of the extracting positive potential was carried out
through the metal frame of the building, then through the spiral-
snakes and the dome lining, and then through the apple-divider.
How was this vortex field used?
For lighting purposes. Street lighting. Building lighting, etc.
In a vortex electrostatic field, inert gases glow. Like modern
fluorescent lamps. But the fact is that the walls of buildings and
structures perfectly shield this field. Therefore, the electrostatic charge
assumed the metal frame of buildings. The central electrode of the
lamp located in the building was connected to the metal frame with
a slider. The lamp lit up. If the building did not have a metal frame,
then there were such traps on the street. Something like
a communication pole. But this is precisely the catcher of the
electrostatic field. A tire goes down the pole and further into the
building or somewhere else, where you need it.
Here is the drawing. It was, it became. On the eaves of the roof you
can see flowerpots with cinnabar. And you also see poles with
electrostatic potential traps.
In short, the light was free.
The second purpose of dome generators was to produce heat. The
principle of heat generation is based on the thermoelectric effect. More
precisely, the effect is the opposite of thermoelectric. When, when an
electric current is passed through a junction of dissimilar metals, heat
is released at the junction.
The same effect occurs when a massive metal junction of two
different metals is placed in a vortex electrostatic field.
The launch is carried out through a pipe descending from the bell
tower. These pipes are almost not preserved, but sometimes they are
found. The launch is carried out from the ground. And no one had ever
climbed the bell tower before and no steps led there. There was no
need. The launch and support of the dome generator was carried out
from the ground.
Negative active potential is applied to the pipe. And due to the fact
that the entire building has a single metal connection with the earth,
the energy will go up the pipe, then turn down the apple-divider,
which is similar in design to the ball of the Wand. Further down the
roof of the dome. The metal frame of the dome is connected to the
metal frame of the building. And further along the metal connections
of the building, the energy goes to the Earth.
The earth here is a “reservoir” with reduced pressure to “drain” the
excess energy supplied to the building frame at start-up. Therefore, the
swirling input energy rises up the pipe, forming a spiral trajectory
of the route of this energy through the pipe. And after passing to the
surface of the ball and further to the bulbous surface of the roof of the
bell tower, the trajectory will also be spiral. And then the process
becomes stable.
As its energy return decreases, the whirlwind will need to be
energetically pushed, recharged with new portions. In this case, we
connect the starting generator and give an additional impulse to the
dome generator.
And here it is very important to pay attention to the following
feature of dome-type generators.
This type of generator plunges the ethereal field into a vortex
dynamic process. This allows you to receive light and heat. But … it
must be noted that the quality of lighting from such a generator, as
well as heat generation, leaves much to be desired. Fluorescent lamps
shine dimly, there is little heat from thermoelectricity.
Modern lighting technologies, as well as those etherodynamic
technologies that we plan to use to produce heat, are incomparably
more efficient than the results produced by a dome generator.
It’s just that there were almost no other technologies then, and
they used what they had.
There were almost no electrodynamics. There were no electric cars.
There were no bulbs of Ilyich, and even more so there was no LED
lighting.
Therefore, there is no point in launching dome generation
technologies now. But this is not the main thing. The main thing is that
the technologies of electrodynamics and the technologies of aether
dynamics conflict with each other. After all, ether dynamics are vortex
dynamic processes that turbulize the ethereal medium. And
electrodynamic processes are wave processes, implying the presence
of a calm ethereal medium in which wave processes occur without
complications.
Starting the dome generators will lead to the failure of the
electrodynamics. Electrical energy and, of course, electromagnetic
communication will disappear. And we need it!?
But the dome generator has another great feature. Streams
of gravitons (read Light) from the dome generator, passing through the
human body, adjusts all life processes to the correct rhythms. And the
body heals. Previously, our ancestors called it God’s Grace. The greatest
concentration of these streams falls on the temple itself, especially
in the place under the dome. Therefore, the parishioners received the
best healing effect after visiting the temple.
I don’t know about infectious diseases, but systemic diseases
caused by a malfunction of the body’s systems are perfectly tuned,
corrected and cured by ethereal flows. It also treats cancer well.
This means that dome generators, designed specifically for
treatment, rehabilitation and prevention, must be built. And there is no
need to build tall bell towers. Small, the size of a house, with a chapel,
for one or more patients. And build somewhere away from the
electrodynamic transmission lines. Somewhere in the field. Where he,
this generator, will not interfere with anyone or anything. Now, in order
to “do not get up twice” a little, just a few words about mercury.
Mercury vapor has the property to accelerate, disperse ethereal
flows. You can do without it, but if possible, it is better to use it.
Therefore, in ancient times, wherever possible, flowerpots with
cinnabar were placed. Cinnabar is an ore of mercury that emits mercury
vapor when heated. Ceramic vases with cinnabar were placed wherever
possible in the vicinity of the dome generator, thereby improving the
dynamic characteristics of ethereal graviton flows.
Mercury was also used to obtain an electrostatic potential
of a piezoelectric nature.
This technology was used, for example, in the “pharaoh’s cylinders”.
The mercury is placed in an iron cavity of the same volume as the
mercury itself. Iron, unlike other metals, does not dissolve in mercury.
So that’s iron. For example, a cylindrical iron vessel. Pour mercury into
it. To the eyeballs. We close the cavity. Strong and sealed. We take the
cylinder in hand. The cylinder heats up by hand. Mercury has a very
high coefficient of thermal expansion. The mercury is trying to expand.
But there is no free space. There is nowhere to expand. The internal
pressure starts to rise. Mercury, in this case, behaves like a piezocrystal.
Like a liquid piezocrystal. At the ends of the cylinder, a piezoelectric
potential is generated, which was used to launch various techno-magic
devices. We worked out the potential, shook it like a thermometer, and
you can reheat it. Vajra also works from the warmth of the hand.
Something like that…
THE GRAIL, URABOROS, AND THE
SEVEN SEALS
Today we are completing a series of publications on the topic
“Technomagic”. We will cover two more questions, those in the title.
The topic of the Wand of Hermes needs to be arranged in a separate
chapter, and you can form a separate topic “Technomagic” — this is how
I used the term “form” in a streamlined way. Publish, publish,
distribute, train, etc. — this is what you will need to do.
I’ll put it all together later and post it on the site.
The Grail Cup is a replicator-a device capable of making copies
of material objects. I deliberately do not mention Living beings — I am
convinced that the Creator will not agree to this.
Copying is done by doubling. I do not know whether it is possible
to treble, upyateryat. We will talk about doubling. The design of the
Grail Cup is based on the principle of operation of the centripetal Rod,
in our case, a channel generator for teleportation. In general, the
replication picture looks like this.
If, on the contrary, we turn on the Uraboros so that it works for the
output, for the rarefaction of both etheric components, then the
resulting void must be filled with something. And with what? Only the
Eternal Spirit remained. This means that the Eternal Spirit will
accumulate and condense inside the ring of Uraboros
You can set up a contact this way. And here there is one very
important nuance. The Spirit, as the Kalagia says, has a monopoly on
“The Life of all Life.”
We put the ring on our head and go to revive… I want to remind
you that this process takes place only in cooperation with the Creator,
so there is no way to create an army of zombies. Don’t even get your
hopes up.