Professional Documents
Culture Documents
BEST STUDY
NOTES
JE
ES
an
ka
lp
SAVE YOUR TIME!
NO NEED OF
TAKING FULL NOTES
JE
NOW!
ES
an
ka
EXAM
ka
lp
lp
ka
an
ES
JE
Chapter - 4
COORDINATION COMPOUNDS AND
ORGANOMETALLICS
Introduction
The coordination compounds contain a central metal atom or ion of Transition metals (d-block elements)
surrounded by a number of oppositively charged ions or neutral molecules (called as Ligands) with more than
its normal valency. These are formed from apparently saturated molecules capable of independent existence.
For example, when aqueous ammonia is added to green solution of nickel chloride, (NiCl2), the colour changes
to purple. The Ni 2+ ions almost disappear from the solution of nickel chloride,
The solution, on evaporation, yields purple crystals corresponding to the formula [Ni(NH3)6]Cl2.
Such a compound is called coordination (or complex) compound. The properties of the complex compound
are completely different from those of Ni2+ ions or ammonia molecules.
ES
When the compound is dissolved in water, there is hardly any evidence of Ni2+ ions or ammonia molecule. It
ionises to give a new species [Ni(NH3)6]2+. Such an ion is called complex ion.
Complex ion
At this stage, it may be noted that the species in the square brackets does not ionise. It remains as
single entity.
ka
For example, Mohr's salt dissolves in water and gives the characteristic properties of Fe2+, NH4+ and SO42–
ions. Thus, double salts are stable in solid state but break up completely into its constituents when dissolved
in water
2+ + 2–
FeSO4.(NH4)2SO4 water
Fe (aq) + 2NH4 (aq) + 2SO4 (aq)
On the other hand, the coordination, compounds retain their identities in the solid state as well as when
dissolved in water or any other solvent. Their properties are completely different from the constituents
(metal ions or molecules). For example, [Ni(NH3)6]Cl2 does not show the properties of Ni or ammonia.
[ 165 ]
Coordination Compounds and Organometallics
1. Ligands and central metal atom/ion: In the formation bonds, the anions or the neutral
molecules act as the electron pair donors whereas the metal atom or ion acts as the electron
pair acceptor.
The donor atoms, molecules or anions which donate a pair of electrons to the metal atom or
ion and form a coordinate bond with it are called ligands. The metal atom or ion to which
these ligands are attached is called central metal atom or ion.
Ligands having one or more lone pair(s) of electrons are further classified as:
JE
(i) Ligands containing vacant -type orbitals can receive backs donated electrons from
the metal ion in low oxidation state. For example CO, NO, CN– and unsaturated
organic molecules.
ES
Such ligands, have filled donor orbitals in addition to acceptor orbital. This in the
complex formed by such ligands both metal and the ligand act as donor and acceptor
π
an
M σ
L
(ii) Ligands which have no vacant orbital to get back donated electrons from the metal
ka
Monodentate or unidentate ligands. The ligands that can coordinate to the central metal ion
at one site only are called monodentate. Such ligands may be neutral molecules, negatively
or positively charge.
A monodentate ligand having more than one lone pair of electrons may simultaneously
co-ordinate with two or more atoms and this act as bridge between the metal ion, in such a
case, of is called a bridging ligand and the complex thus formed is known as bridged complex.
[ 166 ]
Coordination Compounds and Organometallics
H2O 0 Unidentate
NH3 0 Unidentate
CO 0 Unidentate
H2C NH2
ethylenediamine (en)
(or ethane-1,2-diamine) 0 Didentate
H2C NH2
NH2
H2C glycinate ion (gly)
JE
–1 Didentate
COO
COO
ES
CH3 COO
H2C N
CH3 COO
ka
CH3 COO
–4 Hexadentate
H2C N
CH3 COO
lp
Ambidentate ligands: Unidentate ligands containing more than one coordinating atoms are
called ambidentate ligands.
2. Coordination Number: The total number of unidentate ligands (and double the number of
didentate ligands if any) attached to the central metal ion through coordinate bonds is called
the coordination number.
3. Coordination sphere or coordination entity and Counter ions: The central atom and the
ligands which are directly attached to it are enclosed in square brackets and are collectively
termed as the coordination sphere or coordination entity.
[ 167 ]
Coordination Compounds and Organometallics
4. Coordination Polyhedron: The spatial arrangement of the ligand atoms which are directly
attached to the central atom / ion is called coordination polyhedron around the central
atom/ion.
5. Oxidation Number or Oxidation State: The oxidation number of the central atom is defined
as the charge that it carries as calculated by assigning appropriate charges to the ligands and
equating the sum of the charges on the central atom and the ligands equal to the charge on
the coordination sphere.
6. Charge on the Complex Ion: The charge carried by a complex ion is the algebraic sum
of the charges carried by central metal ion and the ligands coordinated to the central metal
ion.
7. Homoleptic and Heteroleptic complexes: Complexes in which the metal atom or ion is
linked to only one type of ligands are called homoleptic complexes, e.g.., [Co(NH3)6[2+. The
JE
complexes in which the metal atom or ion is linked to more that one kind of ligands are called
heteroleptic complexes, e.g., [Co(NH3)4Cl2]+.
ES
8. Homonuclear and Polynuclear complexes: Complexes in which only one metal atom is
present are known as homonuclear complexes. All the examples given so far are of the
homonuclear complexes. Complexes in which more than one metal atom is present are known
as polynuclear complexes.
an
9. Effective Atomic Number (EAN): Sidgwick extended the Lewis theory to account for the
ka
bonding in the coordination compounds. He introduced the term co-ordinate bond for a shared
electron pair if it initially belonged to one atom (donor atom) only. In this case, the donor atom
acts as a lewis base and the metal ion acts as a Lewis acid. The metal on accepts the electron
lp
pairs till it achieves the next inert gas configuration. This is called the effective number rule.
The total number of electrons, which the central metal atom appears to possess in the complex,
including those gained by it in bonding, is called effective atomic number of central metal ion.
When the EAN was 36 (Kr), 54 (Xe) or 86 (Rn), the EAN rule was said to be followed.
For example, [Co(NH3)6]3+ cobalt has an atomic nimbler 27. In Co3+ number of electrons is
24. Each ammonia molecule donates a pair of electrons. So, EAN becomes
24 + (2 × 6) = 36.
In many cases it was found EAN in a complex should be equal to number of electrons present
in next noble gas.
[ 168 ]
Coordination Compounds and Organometallics
[Co(NO2)6]3– Co (27) 24 6 × 2 = 12 24 + 12 = 36
[Pt(Cl6]2+ Pt (78) 74 6 × 2 = 12 74 + 12 = 86
[Cr(CO)6] Cr (24) 24 6 × 2 = 12 24 + 12 = 36
K4[Fe(CN)4] Fe (26) 24 6 × 2 = 12 24 + 12 = 36
K2[PtCl6] Pt (78) 74 6 × 2 = 12 74 + 12 = 86
K3[Cr(C2O4)3] Cr (24) 21 6 × 2 = 12 21 + 12 = 33
an
Illustration 2: What is oxidation state and coordination number of central metal ion in [CoF4]2–?
lp
Solution: [CoF4 ]2 x + (–4) = –2 or x = +2, Coordination ion = 4 as F – is monodentate and its
number is 4.
H2C NH2
Solution: Ethylene diamine, (en) is bidentate ligand.
H2C NH2
Solution: Unidentate ligands continuing more than one coordinating atoms are called ambidentate
ligands.
[ 169 ]
Coordination Compounds and Organometallics
Problem 3: In the complex [Pb(O2) (en)2Br]2+, coordination number and oxidation number of platinum
are:
(a) 4, 6 (b) 6, 4
ka
(c) 4, 4 (d) 5, 4
Problem 4: Which ligand is useful for removal of the toxic effect of lead metal from the body in chelate
therapy treatment?
COO
(a)
COO
(b) CH3COO–
OOCH2 C CH2 COO
N CH2 CH2 N
(c)
OOCH2 C CH2 COO
(d) AsO34
[ 170 ]
Coordination Compounds and Organometallics
Problem 5: A chelating agent has two or more than two donor atoms to bind to a single metal ion. Which
of the following is not a chelating agent?
(a) thiosulphato (b) Oxalato
(c) gycinato (d) ethane-1,2-diamine
Solution: (b) NH 4 does not have lone pair electron to donate. So cannot act as ligand.
Problem 7: Identify the correct statement for the behaviour of ethane-1,2-diamine as a ligand
(a) It is a neutral ligand (b) It is a didentate ligand
(c) It is a chelating ligand (d) All of these
JE
Problem 9: Oxidation number and coordination number of silver in Tollen’s reagent respectively are
an
(a) 1, 1 (b) 2, 1
(c) 2, 2 (d) 1, 2
1. Order of naming ions. In ionic complexes, the cation is named first and then the anion (as in
NaCl: sodium chloride).
Non-ionic complexes are given a one word name.
2. Naming the coordination sphere. In naming the coordination sphere, the ligands are named
first and then the central metal ion.
3. Name of ligands. The names of negative ligands end in -o and names of positive ligands end in
-ium. The neutral ligands are named as such. For example :
[ 171 ]
Coordination Compounds and Organometallics
F– fluorido
–
Cl chlorido NO 2 – nitrito-N
ONO – nitrito-O
Br – bromido SO 4 2– sulphato
– –
OH hydroxido COO Oxalate
CN – cyanido COO–
NO 2 + nitronium
C 6 H5 N pyridine
(C 6 H5 )3 P triphenylphosphine
H2 O aquo/aqua NH 3 ammine
NO nitrosyl CO carbonyl
lp
4. Order of naming ligands. When more than one type of ligands are present, (for Heteroleptic
complex) they are named in alphabetical order of preference without separation by hyphen.
For example, in the complex [Co(NH 3)4 Cl(NO2)]+, the ligands are named in the order :
ammine, chlorido and nitro. Similarly, in the complex K3[Fe(CN)5NO], the ligands are named
as cyanido and nitrosyl.
5. Ending of names. When the complex is anionic, the name of the central metal atom ends
in -ate. For cationic complex [Co(NH3)6] Cl3 is named without characteristic ending of the
name of the metal as :
The coordination compound, K[Pt(NH3)Cl5] which contains the anionic complex [Pt(NH3)Cl5]–
is named with ending of the name of the metal as -ate.
[ 172 ]
Coordination Compounds and Organometallics
It may be noted that for anionic complexes the Latin names of certain metals are commonly
used. For example,
However, if the complex is cationic the name of the metal is given as such, e.g. iron for Fe,
silver for Ag, gold for Au, copper for Cu, etc. For example,
6. Bridging groups in bidentate ligands. For ligands which act as bridge between two metal
atoms, the Greek letter () is written before their names. For example,
JE
NH2
(NH3)4 Co Co (NH3)4 (NO3)4
NO2
ES
In this case, the ligands are NH2– (amido), NO2– (nitro) and NH3 (ammine). The oxidation
state of cobalt is +3 as Tetramine cobalt (III) -amido--nitrotetraamine cobalt (III)
an
OH
(H2O)3Fe — NH2 — Fe(H2O)3
PO4
OH
ka
7. Point of attachment. When a ligand can coordinate through more than one atom, then the
lp
point of attachment of the ligand is indicated by putting the symbol of the atom through which
coordination occurs after the name of the ligand. Sometimes, different names are used for
alternative modes of attachment. For example,
For example,
Solution: Anion (simple ion) = Cl– for the coordination entity, writing first the symbol for metal atom
and then the ligands in the alphabetical order, we have
[ 173 ]
Coordination Compounds and Organometallics
Cation (complex ion) = [Co(NH3)4 (H2O)Cl]x where x is the charge on the complex ion
x = oxidation state of cobalt + charge on the ligands
x =+3 + 0 + 0 + (–1) = + 2
(H2O and NH3 are neutral groups and carry no charge. Only chlorido group carries
charge = –1
Charge on one anion = –1
Charge on complex cation =+2
Clearly, two anions will neutralise the charge of the cation
Hence, formula of the given compound is [Co(NH3)4(H2O)Cl]Cl2
(ii) Cation = K+
an
Balancing the positive and negative charges, the formula of the compound will be
K2[Zn(OH)4].
lp
[ 174 ]
Coordination Compounds and Organometallics
Problem 6: When 1 mol CrCL36H2O is treated with excess of AgNO3, 3 mol of AgCl are obtained.
ka
Solution: (d) As 3 moles of HCl is formed so 3 ionisable Cl– ion are present. Which possible from
option (d)
Problem 8: The stabilisation of coordination compounds due to chelation is called the chelate effect.
Which of the following is the most stable complex species?
(a) [Fe(CO)5 ] (b) [Fe(CN)6 ]3–
(c) [Fe(C 2 O4 ) 3] 3– (d) [Fe(H2 O) 6] 3+
[ 175 ]
Coordination Compounds and Organometallics
(a) Structural isomers: The isomers which have same molecular formula but different structural
arrangement of atoms or groups of atoms around the central metal ion are called structural
ES
1. Ionisation isomerism. The compounds which have same molecular formula but give
different ions in solution are called ionisation isomers. In this type of isomerism, the
an
difference arises due to the interchange of groups within or outside the coordination
spheres.
2. Hydration isomerism. The compound which have the same molecular formula but differ
in the number of water molecules present as ligands or as molecules of hydration are
called hydrate isomers.
They differ largely from one another in their physical and chemical properties, as illustrated
below:
(i) [Cr(H2O)6]Cl3 It does not lose water when treated with conc. H2SO4
Violet and three chloride ions are precipitated with AgNO3.
[ 176 ]
Coordination Compounds and Organometallics
(ii) [Cr(H2O)5Cl] Cl2.H2O It loses one water molecule when treated with conc.
Blue green H2SO4 and 2Cl– ions precipitated with AgNO3.
4. Linkage isomerism. The compounds which have the same molecular formula but differ
in the mode of attachment of ligand to the metal atom or ion are called linkage isomers.
For example, in NO2– ion, the Nitrogen atoms as well as the Oxygen atom can donate
JE
their lone pairs. The unidentate ligands which can bind to the central atom through two
donor atoms are also called ambidentate ligands. Other example of ligands are :
Red
Example:
H H H H H H
Co C C C H Cl2 and Co C C C H Cl2 ions
NH2 H NH2 2 H NH2 NH2 2
[ 177 ]
Coordination Compounds and Organometallics
2+
NH2
NH2 2+
O2
7. Polymerisation isomerism: This not the true isomerism because of occurs between
compound having the same emperical formula, but different molecular weight for example,
[Pt(NH3)2Cl2] [Pt(NH3)4], [Pt(Cl4)] [Pt(NH3)Cl3]2 and [Pt(NH3)3Cl]2 [PtCl4] all have the
same emperical formula.
(b) Stereoisomers: Stereoisomers are those isomers which have the same position of atoms
or groups but they differ in the spatial arrangements around the central atom. Stereoisomerism
JE
involves two types of isomerism viz., geometrical isomerism and optical isomerism. These are
discussed below :
positions around the central ion. The ligands occupy positions either adjacent to one
another or opposite to one another. These are referred to as cis-form (ligands occupy
adjacent positions) and trans-form (ligands occupy opposite positions). This type of
isomerism is, therefore, also referred to as cis-trans isomerism.
an
not show geometrical isomerism this is because all position are adjacent to one another
in this complex. However, square planar complexes show geometrical isomerism.
(a) Square planar complexes of the MA2X2, MA2XY, MABX2, MABXY can exist as
geometrical isomers (Here A and B are neutral ligands such as H2O, NH3, CO, NO,
C5H5N whereas X and Y are anionic ligands such as Cl–, NO2–, CN–, SCN–, etc.
Cis Trans-
(Pale yellow) [Pt(NH3)2Cl2] (Dark yellow)
[ 178 ]
Coordination Compounds and Organometallics
Cis- Trans-
(b) The square planar complexes containing unsymmetrical bidentate ligands such as
[M(AB)2] also show geometrical isomerism. For example, the complex, [Pt(gly)2] where
gly = H2NCH2COO– (glycinato) exists in cis and trans forms. Where, as M(AA)2 do not
JE
Cis- Trans-
It may be noted that the square planar complexes of the type MA4, MA3X or MAX3 will
not show geometrical isomerism because in these cases, the spatial arrangements of the
ES
facial meridional
[ 179 ]
Coordination Compounds and Organometallics
(b) Octahedral complexes of the type M(AA)2X2 and M(AA)2XY can also exist as cis
and trans isomers, where AA represents a symmetrical bidentate ligand such as
ethylendiamine (en), oxalate ion (ox) For example, an octahedral complex
[Co(en)2Cl2]+ exists as two isomers.
There are very large number of other geometrical isomers known but we have considered
only simple examples.
JE
2. Optical isomerism. There are certain substances which can rotate the plane of polarised
light. These are called optically active substances. The essential condition for a substance
to show optical activity is that the substance should not have a plane of symmetry in its
ES
structure. The optical isomers have identical physical and chemical properties. They differ
only in the direction in which they rotate the plane of polarised light. The d and l isomers
are mirror images of each other just as left hand is mirror image of the right hand. These
mirror image compounds are non-superimposable on each other and do not possess the
plane of symmetry.
an
The common examples of complexes showing optical isomerism are octahedral complexes
having bidentate ligands. For example,
ka
(i) Complexes of the type M(AA)3 (where AA is symmetrical bidentate ligand) such as
[Co(en)3]3+ and [Cr(ox)3]3– exist as optical isomers.
lp
Mirror
[ 180 ]
Coordination Compounds and Organometallics
Trans-[Co(en)2Cl2]+ isomer
Superimposable mirror images
(Optically inactive)
ES
an
ka
(iii) Complexes of the type [M (AA)X2Y2] containing one symmetrical bidentate ligands
show optical isomerism. For example, [Co(en)(NH3)2Cl2]+ exists in d- and l- forms.
[ 181 ]
Coordination Compounds and Organometallics
Solution: (b) When ligands can coordiante with them either of two atoms it give rise to coordination
isomerism.
Problem 3: Which of the following complex or the complex ion will show geometrical isomerism ?
JE
Problem 5: Which of the following complex ions will not show optical activity ?
(a) [Pt(Br)(Cl)(I)(NO2 )(py)NH3 ] (b) cis-[Co(en)2 Cl2]+
lp
Problem 6: Due to the presence of ambidentate ligands coordination compounds show isomerism.
Palladium complexes of the type [Pd(C6H5)2(SCN)2] and [Pd(C6H5(NCS)2]Cl represent
(a) linkage isomers (b) coordination isomers
(c) ionisation isomers (d) geometrical isomers
Solution: (a) When ligands can coordiante with them either of two atoms it give rise to coordination
isomerism.
[ 182 ]
Coordination Compounds and Organometallics
Problem 8: What kind of isomerism exists between [Cr(H 2O)6 ]Cl3 (violet) and [Cr(H2 O)5Cl]H2 O
(greyish-green)?
(a) linkage isomerism (b) solvate isomerism
(c) ionisation isomerism (d) coordination isomerism
Problem 10: Indicate the complex ion which shows geometrical isomerism
(a) Ma 2 b2 (b) Ma 4
JE
Werner was the first to explain the bonding in coordination compounds. However, with the advancement
of theories of valence, modern theories have been proposed to explain some characteristic properties
of these compounds such as colour, geometry and magnetic properties. The main theories namely
an
valence bond theory, crystal field theory and molecular orbital theory have been proposed. Various
theories are:
ka
Werner isolated different complex compounds from the reaction of cobalt chloride and ammonia.
There are given below :
lp
Compound Colour
1. In coordination compounds, metal atoms exhibit two types of valencies namely, the primary
valency and the secondary valency.
The primary valency is ionizable whereas the secondary valency is non-ionizable. In modern
terminology, the primary valency corresponds to oxidation state and the secondary valency
corresponds to coordination number.
[ 183 ]
Coordination Compounds and Organometallics
2. Every metals atom has a fixed number of secondary valencies, i.e., it has a fixed coordination
number.
3. The metal atoms tend to satisfy both its primary as well as secondary valencies. Primary
valencies are satisfied by negative ions whereas secondary valencies are satisfied either by
negative ions or by neutral molecules or +ve ions. In certain cases, a negative ion may satisfy
both types of valencies.
4. The secondary valencies are always directed towards the fixed positions is space and this leads
to definite geometry of the coordination compound. For example, if a metal ion has six
secondary valencies, these are arranged octahedrally around the central metal ion. If the metal
ion has four secondary valencies, these are arranged in either tetrahedral or square planer
arrangement around the central metal ion. The secondary valencies, thus, determine the
stereochemistry of the complex. On the other hand, the primary valency is non-directional.
Thus, a metal atom exhibits primary valencies in the formation of its salts (e.g. CoCl3, AgNO3)
while the metal atoms exhibits its secondary valencies in the formation of its complex ions
JE
1. The central metal ion in the complex makes available a number of empty orbitals for the
formation of coordinate bonds with suitable ligands. The number of empty orbitals made
an
available for this purpose is equal to coordination number of the central metal ion. For example,
if coordination number is 6, six empty orbitals are made available and if coordination number
is 4, four empty orbitals are made available in the central metal ion.
ka
2. The appropriate atomic orbitals (s, p and d) of the metal hybridise to give a set of equivalent
orbitals of definite geometry such as square planar, tetrahedral, octahedral and so on.
2 sp linear
3 sp 2 Trigonal planar
4 sp 3 Tetrahedral
4 dsp 2 Square planar
6 sp3 d2 or d2sp3 Octahedral
3. The d-orbitals involved in the hybridisation may be either inner d-orbitals i.e. (n–1) d or outer
d-orbitals i.e., nd. For example, in case of octahedral hybridisation, the orbitals may be two
of the 3d, one of 4s and three of 4p(d 2sp3) or one 4s, three 4p and two 3d(sp 3d 2
hybridisation).
4. Each ligand has at least one orbital (of donor atom) containing a lone pair of electrons.
5. The empty hybrid orbitals of metal ion overlap with the filled orbitals of the ligand to form
metal-ligand coordinate covalent bonds.
[ 184 ]
Coordination Compounds and Organometallics
(i) [Cr(NH3)6]3+ complex. The Chromium (Z=24) has the electronic configuration 3d54s1 as
shown below (a). The Chromium in this complex is in +3 oxidation state and the ion is formed
by the loss of one 4s and two of the 3d-electrons as shown below (b). The inner d-orbitals
are already vacant and two vacant 3d, one 4s and three 4p-orbitals are hybridised to form
six d2sp3-hybrid orbitals. Six pairs of electrons one from each NH3 molecule, (shown by xx)
occupy the six vacant hybrid orbitals. The molecule has octahedral geometry.
(ii) [Fe(CN)6]3– complex. Iron atom (Z=26) has the electronic configuration.3d64s2. In this
complex, Iron is in +3 oxidation state and has the electronic configuration 3d5 as shown below
It has been experimentally observed that the complex has one unpaired electron. To account
an
for this, the two electrons in 3d-orbitals are paired up leaving two 3d-orbitals empty. These
six vacant orbitals (two 3d, one 4s and three 4p) hybridise to form d2sp3-hybrid orbitals. Six
pairs of electrons one from each CN– ion (shown by xx) occupy the six vacant hybrid orbitals.
ka
The molecule has octahedral geometry and is paramagnetic due to the presence of one
unpaired electron.
lp
(iii) [Fe(H2O) 6]3+ ion. In this case also, iron is in +3 oxidation state and has the electronic
configuration as 3d5. This complex has been found to be paramagnetic due to the presence
of five unpaired electrons. To account for this, the electrons in 3d-orbitals are not disturbed
and the outer 4d-orbitlas are used for hybridisation. The six orbitals (one 4s, three 4p and two
4d) are hybridised in resulting sp3d2-hybridisation. Six pairs of electrons, one from each water
molecule occupy the six hybrid orbitals. The molecule is octahedral and is paramagnetic.
[ 185 ]
Coordination Compounds and Organometallics
3d 4s 4p
(a) Fe-atom
(b) Fe (III)
(iv) [Fe(CN)6]4– ion. In this case, iron is in +2 oxidation state. The complex is diamagnetic and
therefore, it involves d2sp3-hybridisation as shown below :
JE
ES
From the above discussion it can be noted that in octahedral structures, the central metal may use
an
inner (n–1)d orbitals or outer nd-orbitals for hybridisation. Therefore, the complexes may be
classified as :
ka
(a) Inner orbital complex. If the complex is formed by the use of inner d-orbitals for
hybridisation (written as d2sp3), it is called inner orbital complex. In the formation of inner
orbital complex, the electrons of the metal are forced to pair up and hence the complex will
lp
be either diamagnetic or will have lesser number of unpaired electrons. Such a complex is
also called as low spin complex.
(b) Outer orbital complex. If the complex is formed by the use of outer d-orbitals for
hybridisation (written as sp3d2), it is called an outer orbital complex. The outer orbital complex
will have larger number of unpaired electrons since the configuration of the metal ion remains
undisturbed. Such a complex is also called high spin complex.
In this case, the geometry will be tetrahedral or square planar depending upon whether
sp 3 or dsp 2 -hybridisation is involved.
(i) [Ni(CN)4]2– ion. The Nickel atom has the ground state electronic configuration as 3d84s2. In
this case Nickel is in +2 oxidation state and its electronic configuration is 3d8.
[ 186 ]
Coordination Compounds and Organometallics
Depending upon the type of hybridisation, there are two possible ways in which the complexes
of Nickel with coordination number 4 may be formed. If the complex involves dsp2 -
hybridisation, it would have square planar structure. For the formation of tetrahedral structure
the 3d-orbitals remain unaffected and, therefore, the two unpaired d-electrons remain as such.
Consequently, the complex would be paramagnetic like the Ni2+ ion itself.
On the other hand, for the formation of square planar structure through dsp2-hybridisation.
one of the 3d-orbitals should be empty and available for hybridisation. This is possible, if the
two unpaired d-electrons are paired up thereby making one of the 3d-orbitals empty. There
is thus no unpaired electron and the complex would be diamagnetic.
We know from experiments that the complex [Ni(CN)4]2– is diamagnetic indicating that the
hybridisation involved in this case is dsp2, as represented. The dotted arrows represents,
electrons pairs donated by CN– ions. The ion has a square planar geometry.
JE
3d 4s 4p
(a) Ni Atom
(b) Ni (II)
ES
2–
(c) [Ni (CN)4]
(ii) [NiCl4)]2– ion. The nickel (II) ion has two unpaired electrons as shown below in (a). The
magnetic measurements of the complex [NiCl4]2– show that it is paramagnetic and has two
ka
unpaired electrons. Therefore, in this case the 3d-orbitals remain undisturbed and sp 3-
hybridisation occurs resulting in tetrahedral structure of the complex. As is evident from Fig.
(b) there are two unpaired electrons in the complex.
lp
3d 4s 4p
(a) Ni-atom
(b) Ni-(II)
(iii) [Ni(CO)4]. The Nickel(0) has 3d84s2 as its outer electronic configuration. For complexes with
coordination number 4, the central atom may be involved is sp3 or dsp2 type of hybridisation,
for each of which the 4s-orbital must be empty. The electrons of 4s orbitals are forced into
the 3d-orbitals to pair up with the two unpaired d-electrons. Therefore, the complex is
diamagnetic. This results in sp3 hybridisation and the complex has tetrahedral structure.
[ 187 ]
Coordination Compounds and Organometallics
(iii) This theory does not explain the absorption spectra of complexes.
These properties are more satisfactorily explained by the ligan field theory. This theory takes into
account the splitting up of the degeneracy of the five d-orbitals in the field of ligands. The extent
of splitting depends upon the metal d-orbitals, nature and number of ligands.
an
The Crystal Field Theory (CFT) was originally proposed for explaining the optical properties of
ka
crystalline solids. It was applied to the study of coordination compounds in the 1950s.
The valence bond theory considers the bonding between the metal ion and the ligands as purely
covalent. On the other hand, crystal field theory is based on the assumption that the metal ion and
lp
the ligands act as point charges and the interactions between them are purely electrostatic.
In case of negative ligands (anions such as Cl–, Br–, CN–), the interactions with metal ions are ion-
ion interactions. If the ligands are neutral molecules (such as NH3, H2O, CO), the interactions with
the metal ions are ion-dipole interactions. For example, in the case of complex ion [CoF6]3– the
interactions are between Co3+ and F– ions whereas in [Co(NH3)6]3+, the interactions are between
negatively charged and of NH3 molecules (-charge on N atom) and Co3+ ion.
In the case of free metal ion, all the five d-orbitals have the same energy. These orbitals having the
same energies are called degenerate orbitals.This means that an electron can occupy any one of
these five d-orbitals with equal energy. However, on the approach of the ligands, the orbital electrons
will be repelled by the line pairs (or negative charges) of the ligands. The repulsion will raise the
energy of the d-orbitals. If all the ligands approaching the central metal ion are at equal distance
from each of the d-orbitals, the energy of each orbital will increase by the same amount, due to
spherical field or symmetrical field of ligands. Therefore, these orbitals will still remain degenerate,
[ 188 ]
Coordination Compounds and Organometallics
but they will have higher energy than that of the free ion. But we know that d-orbitals have different
orientations and, therefore, these orbitals will experience different interactions from the ligands. The
orbitals lying in the direction of the ligands,will experience greater repulsion and their energies will be
raised relative to their positions in a symmertrical field. (Remember that orbitals represent regions of
negative charge; because like charges repel each other and therefore, potential energy increases
when they are brough together). On the other hand, the orbitalysing away from the approach of the
ligands will have lesser interactions with the negative charge of donor atoms and therefore, their
energies will be lower than they would be in a spherical field. Therefore, due to the electrical field of
the ligands, the energies of the five d-orbitals will split up. This conversion of five degenerate
d-orbitals of the metal ion into different sets of orbitals having different energies in the presence
of electric field of ligands is called crystal field spliting. This concept forms the basis of Crystal
Field Theory.
d x2 - y2 d z2 (e g )
ES
Average energy of
d-orbitals in a spherical
crystal field
an
Thus, in coordination compounds, the interaction between the ligand and the metal ion causes the
ka
five d-orbitals to split up. The number of ligands (coordination number) and their arrangement
(geometry) around the central metal ion will have different effect on the relative energies of the five
d-orbitals. In other words, the crystal field splitting will be different in different structures with
lp
For example, in case of octahedral complexes, the five d-orbitals split up into two sets; one set
consisting of two orbitals d x 2 y2 and d z2 of higher energy and another set consisting of three orbitals
(dxy, dyz and dzx) of lower energy.
The energy difference between the two sets of energy levels is called crystal field splitting energy
and is represented as 0 (the subscript ‘o’ stands for octahedral). It measures the crystal field
strength of the ligands.
It may be noted that the crystal field splitting occurs in such a way that the average energy of the
d-orbitals does not change. This is known as barycentre rule, which is similar to ‘centre of gravity’
type rule. This means that the three orbitals lie at an energy that is 2/5 0 below the average d-orbital
energy and the two d-orbitals lie at an energy 3/5 0 above the average energy.
[ 189 ]
Coordination Compounds and Organometallics
Spectrochemical Series
The crystal field splitting (0) depends upon the nature of the ligands. The graeter the ease with
which the ligand can approach the metal ion, the greater will be the crystal field splitting caused by it.
The ligands which cause only a small degree of crystal field splitting are called weak field ligands
while those which cause a large splitting are called strong field ligands.
Thus, the ligands can be arranged according to the magnitude of the 0 and this arrangement is
called spectrochemical series. The spectrochemical series in the increasing order of crystal field
splitting is given below :
I– < Br– < SCN– < Cl– < S2– <NO3– < F– < OH– < OX2– < O2– < H2O < NCS– < edta4– < NH3 < en
< dipy < o-phen < NO2– < CN– < CO
Increasing crystal field : The above spectrochemical series is an experimentally determined series
based on the absorption of light by complexes with different ligands. From the series it is clear that
JE
CO, CN– and NO2– are strong field ligands whereas I–, Br– and Cl– are weak field ligands. In
general, the ligands lying above H2O are called strong field ligands and they cause greater crystal
field splitting (or high 0). On the other hand the ligands lying below water are called weak field
ES
ligands and they cause lesser crystal field splitting (or low 0).
Similarly, it can be shown from the geometry, that in tetrahedral complexes, the two d-orbitals ( d x 2 y 2
and d x 2 called ‘e’) become more table and of lower energy and the three orbitals ( d xy , d yz and d zx
an
called t2) become less stable and of higher energy as shown below :
(t2)g
ka
dxy dxz dzx
lp
d x 2 - y2 d z 2 (e)g
Electronic Structures and Properties of complexes according to C.F. theory : The electronic
configurations of complexes depend upon the crystal field splitting. We have learnt that in octahedral
complexes, the three orbitals are of lower energy and two orbitals are of higher energy. According to
[ 190 ]
Coordination Compounds and Organometallics
Hund’s rule, electrons occupy a set of orbitals of same energy one at a time with their spins parallel.
The electrons only pair up after each orbital gets one electron. So, for complexes having upto three
d-electrons (d1, d2 and d3) each electron can occupy a separate orbital in the lower set as shown
below :
1 2 3
d complex d complex d complex
1 2 3
t2g t2g t2g
(i) All the four electrons may occupy lower set of orbitals with one electron gets paired, i.e., t2g4. It
experiences a strong repulsion from the electron already there.
JE
(ii) The three electrons occupy lower set of orbitals and the fourth electron goes to one of the higher
set of orbitals i.e., t2g3 eg1.
Which electronic configuration is possible or has the lower energy depends upon the relative magnitude
ES
of the crystal field splitting (0) and the pairing energy, P (P represents the energy required for
electron pairing in a single orbital). The crystal field splitting energy depends upon the nature of
ligands attached. If 0 is large (as it is for strong field ligands), the electrons will try to remain in the
an
lower set of orbitals. In this case, the complex has less number of unpaired electrons and is called
low spin complex.
In this case the repulsion due to pairing of electrons will be less than 0.
ka
On the other hand, if 0 is small (as it is for weak field ligands), then after filling the lower set of three
orbitals with one electron each, the next electron goes to the higher set of orbitals. In this case, the
repulsion due to pairing of electrons will be more than 0. The pairing of electrons will occur only
after all the five orbitals are singly filled. In this case, the complex will have maximum number of
lp
[ 191 ]
Coordination Compounds and Organometallics
Let us consider the complexes of Fe (III) such as [Fe(CN)6 ]3– and [Fe(H2O)6]3+. Fe3+ has 3d5
electronic configuration having five electrons. Now, CN– is a strong field ligand and we expect large
splitting of d-orbitals. As a result, the five d-electrons will true to remain in lower set and will pair up,
i.e., t2g5. This results in low spin complex which will have only one unpaired electron. On the other
hand, H2O is a weak field ligand and we expect small splitting of d-orbitals. As a result, after filling
one electron each in lower set of orbitals, the remaining two electrons will go the the higher set of
orbital, i.e., t2g3eg2. Thus, the complex will be paramagnetic due to the presence of five unpaired
electrons. It is also called high spin complex.
t2g6eg°
an
ka
Cobalt in [Co(NH3)6]3+ and [CoF6]3+ is in +3 oxidation state and it has six d-electrons. It has been
observed that F ion is a weak field ligand and therefore, 0 is small. The complex will be high spin
having the configuration t2g4 eg2. As clear from the figure, the complex is paramagnetic due to the
lp
presence of four unpaired electrons. On the other hand, NH3 is a strong field ligand and therefore,
the electrons pair up having the configuration t2g6 eg0. This results in low spin [Co(NH3)6]3+ complex.
Nature of ligand. The value depends upon the nature of the ligand. The greater the ease with
which the ligands can approach the metal ion and interact with it, the greater will be the crystal field
splitting energy. The ligands which cause only small value are called weak field ligands while
those which cause a large value are called strong field ligands.
The ligands can be arranged in the increasing field strength in spectrochemical series.
Oxidation state of the metal ion. In general, the higher the ionic charge on the central metal ion,
the greater the value of . Therefore, the metal ion with higher oxidation state causes larger than
[ 192 ]
Coordination Compounds and Organometallics
is done by the ion with lower oxidation state. For example, for the entity [Co(H2O)6]3+ will be more
than for the entity [Co(H2O)6]2+ because oxidation state of cobalt is +3 in the first and +2 in the
second.
Nature of the metal ion. For the analogous entities within a group, values differ. The value for
similar complexes in the same oxidation state increases by (30-50%) on going from 3d series (first
transition series) to 4d series (second transition series) to 5d series (third transition series). As a
consequence of this, coordination entities of second and third transition series have a greater tendency
to form low spin complexes as compared to the first transition series.
Geometry of the coordination entity. The value for tetrahedral coordination entities is about
half the value for octahedral entities, i.e.
4
t 0
9
Illustration 1: Why are low spin tetrahedral complexes not formed?
JE
Solution: This is because for tetrahedral complexes, CFSE is lower than pairing energy.
Illustration 2: Give the electronic configuration of the following complexes on the basis of Crystal Field
ES
Splitting theory.
6 0
[Fe(CN)6]4– has Fe2+ (d6) viz. t 2g eg
ka
6 3
[Cu(NH3)4]2+ and Cu2+ (d9) viz. t 2g eg
Illustration 3: Explain why [Fe(H2O)6]3+ has magnetic moment value of 5.92 B.M. whereas [Fe(CN)6]3+
lp
Solution: H2O is weak ligand so electron do not pair up. While CN is strong ligand so electron pair up.
Illustration 4: Arrange following complex ions in increasing order of crystal field splitting energy (0).
Solution: From spectrochemical series, CFSE of ligands is in the order: Cl– < NH3 < CN–
Illustration 5: Why do compounds having similar geometry have different magnetic moment?
Solution: The difference is due to presence of weak and strong ligands. If ligand is strong (high
CFSE), electron in d-subshell will pair up and magnetic moment will be low. If ligand is weak
(low CFSE), electron will not pair up. Hence, magnetic moment will be high, e.g. [CoF6]3–
and [Co(NH3)6] both are octahedral but former is paramagnetic while latter is diamagnetic.
[ 193 ]
Coordination Compounds and Organometallics
Problem 4: The complex [Co(NH3)6]Cl3 in aqueous solution ionizes to give a total number of ions
equal to
ES
(a) 0 (b) 2
(c) 3 (d) 4
(c) Greater is the basic character of the ligand, the greater is the stability of the complex.
(d) Chelate complexes have low stability constants.
lp
Solution: (b) Greater the charge on the central ion, greater is the stability of the complex.
Problem 6: The stability constants of the complexes formed by a metal ion (M2+) with NH3, CN–, H2O
and en are of the order 1011, 1027, 1015 and 108 respectively. Then
(a) en is strongest ligand
(b) CN– is the strongest ligand
(c) These values cannot predict the strength of the ligand
(d) All ligands are equally strong
Problem 7: Crystal field stabilization energy for high spin d4 octahedral complex is
(a) –0.6 0 (b) –1.8 0
(c) –1.6 0 + P (d) –1.2 0
[ 194 ]
Coordination Compounds and Organometallics
(c) 15 (d) 24
Problem 10: [Cr(H2O)6 ]Cl3 (at. mno. of Cr = 24) has a magntic moment of 3.83 B.M. The correct
distribution of 3d electrons in the chromium of the complex is
1 1 1 1 1 1
(a) 3d xy , 3d yz , 3d xz (b) 3d xy , 3d yz , 3d x 2
JE
1 1 1 1 1 1
(c) 3d (x 2 y2 ) , 3d z2 , 3d xz (d) 3d xy , 3d( x 2 y2 ) , 3d yz
complexes. As we have learnt in the previous unit, most of the transition metal complexes are
coloured in their solid or solution form. The transition metals have the property to absorb certain
radiations from the visible region of the spectrum and as a result, the transmitted or reflected light is
ka
coloured. The visible light (white light), as we know is a mixture of radiations of many wavelengths
ranging from blue (about 400 nm) to red (about 700 nm). When some of these wavelengths are
removed from a beam of white light by passing the light through a sample, then the transmitted light
lp
is no longer white. For example, if red light (long wavelength) is absorbed from white light, then it
appears to us to be green (short wavelength). On the other hand, if green light (short wavelength) is
absorbed then it appears to us to be red. Red and green colours are called complementary colours.
Thus, the colour we see of a complex in a solid or in a solution is due to the light which is not
absorbed but which is transmitted (complementary colour).
In the case of transition metal complexes, the energy difference between two sets of d-orbitals is
very small. When visible light falls on them, the electron raised from lower set of orbitals to higher set
of orbitals. For example, in case of octahedral complexes, the electron goes from set of dxy, dyz, dzx to
set of d x 2 y 2 orbitals. As a result of absorption of some selected wavelength of visible light corresponding
to energy difference between these sets of energy levels, the transmitted light gives colour to
complexes. For example, the complex [Ti(H2O)6]3+ is purple.
In this complex, the metal ion has d1 configuration. In ground state this electron occupies one of the
lower set of orbitals having the electronic configuration, t2g 1. The next higher energy state eg is
[ 195 ]
Coordination Compounds and Organometallics
available for the excitation of electron. When white light passes through the complex, the electron
gets excited from the lower set of orbitals (t2g) to one of the higher set of orbitals, eg ( d x 2 y 2 or
d z 2 orbital) by absorbing light equal to 0.
t 12 g eg0
t 20g e1g
hv
light
absorbed
The energy corresponding to this transition corresponds to green and yellow lights which are absorbed
from the white light, while the blue and red portions are emitted. The solution of complex [Ti(H2O)6]3+,
therefore, looks purple.
an
Since, the difference between different sets of orbitals in octahedral complexes vary from on metal
ion to another and the nature of the ligands, therefore, different complexes absorb different amounts
of energies from visible region and exhibit different colours. For example, let us consider three
ka
Therefore, excitation energy will be smallest (largest wavelength absorbed) for [Co(H2O)6]3+ complex
and largest Z (smallest wavelength absorbed) for [Co(CN)6]3– complex. That is why, [Co(H2O)6]3+
absorbs orange colour and appears blue and [Co(CN)6]3– absorbs violet colour and appears as
yellow.
The relationship between the wavelength of light absorbed and the colour observed in some coordination
entities as given in Table.
[ 196 ]
Coordination Compounds and Organometallics
It may be noted that in the absence of ligands, the crystal field splitting does not occur and hence the
substance is colourless. For example, removal of water from [Ti(H2O)6]Cl3 on heating makes it
colourless. Similarly, anhydrous CuSO4 is white, but CuSO4.5H2O is blue in colour.
JE
The effect of the ligand on the colour of a complex may be illustrated by taking the example of
[Ni(H2O)6]2+. This is formed when Nickel chloride is dissolved in water. The aqueous solution of the
complex has green colour. If the didentate ligand, Ethane-1,2-diamine (en) is progressively added in
ES
the molar ratio of en : Ni as 1 : 1, 2 : 1 and 3 : 1, the following series of reactions occur resulting
different colour changes as:
These colour changes are observed due to the presence of different ligands in the complexes.
lp
It may be noted that only those transition metal complexes are coloured which have incomplete
d-subshells. The transition metal ions have completely filled or completely empty d-subshells are
colourless. For example, complexes of Cu+ (d10), Zn2+ (d10), Ag+ (d10), Ti4+ (d0), etc. are colourless.
The colours of many familiar gemstones are due to the presence of transition metal ions. In these,
the colours are produced due to electronic transitions within d-orbitals (called d-d transitions) of a
transition metal ion. For example, the mineral Corundum Al2O3 (aluminium oxide) is colourless when
pure. However, when various M3+ transition metal ions are present in trace amounts various gemstones
are formed. Ruby is Aluminium oxide containing about 0.15 – 1% Cr3+ ions which are randomly
distributed in positions normally occupied by Al3+. We may imagine these Chromium (III) species as
octahedral Chromium (III) complexes incorporated into alumina lattice. The d-d transitions at these
centres give rise to brilliant red colour.
[ 197 ]
Coordination Compounds and Organometallics
Most of the complexes are highly stable. The interaction between metal ion and ligand
may be regarded as Lewis acid-base reaction. If the interaction is strong, the complex
formed would be thermodynamically more stable. Let us consider the equilibrium reaction
between metal ion (M a+ ) and n ligands (L x– ) to form the complex [ML n] b+
JE
where a+, x– and b+ are the charges on the metal, ligand and complex respectively. Charge balance
requires that
ES
The stability constant for the above general reaction may be written as
an
b
[ML n ]
K=
[M a ] [Lx ] n
The value of the magnitude of K gives as indication of the stability of the complex in solution. The
ka
System K
lp
The above values give very interesting observations. The values indicate that CN– ion is a stronger
ligand than NH3 molecule because the stability constants for cyanide complexes are very large in
comparison to corresponding ammine complexes.
[ 198 ]
Coordination Compounds and Organometallics
The K values indicate that the bidentate ligand NH2CH2CH2NH2 forms a considerably more stable
complex than ammonia.
Factors affecting the stability of a complex ion. The stability of a complex ion depends
upon the following factors :
1. The nature of the central metal ion. In general, the greater the charge density on the
central ion, the greater is the stability of its complexes. In other words, the greater the charge
and the smaller the size of an ion, i.e., (the larger the charge/radius ratio of an ion), the greater
is the stability of its complexes. For instance, Fe3+ ion carries higher charge than Fe2+ ion but
their size is about the same. Hence, charge density is higher on Fe3+ than on Fe2+ ion. The
complexes of Fe3+ ion are, therefore, more stable.
The order of stability of complexes of some of the ion carrying the same charge but differing
in ionic radii also support the above view. In general,
All these ions carry the same charge but the size increases as one moves from Cu2+ to Mn2+.
Hence, complexes of Cu2+ are most stable while those of Mn2+ are least stable.
an
2. The nature of the ligand. The more basic a ligand, the greater is the ease with which it
can donate its lone pairs of electrons and, therefore, the greater is the stability of the complexes
formed by it. Thus, CN– and F– ions and NH3 molecules, which are strong bases, are also
ka
For anionic ligands, the higher the charge and the smaller the size, the more stable is the complex
formed. Thus, F– ion gives more stable complexes than does Cl– ion.
lp
Coordination compounds are generally prepared by common methods such as substitution reactions,
redox reactions and by the direct combination of the reactants. These are briefly discussed below :
Cobalt (II) nitrate reacts with concentrated aqueous ammonia and NH4NO3 in the presence
of H2O2 to give the complex, Pentaamminenitrocobalt (III) nitrate as
[ 199 ]
Coordination Compounds and Organometallics
An aqueous solution of oxalic acid and potassium oxalate reduces K2Cr2O7 to the complex
ion trioxalatochromate (III) ion.
JE
3. Direct combination of reactants. Metal ammines can be prepared by the direct addition of
ES
a metal salt to liquid ammonia.
2. In qualitative analysis. The complex formation method is used in qualitative scheme of group
I for the separation of Silver ion from the precipitate of AgCl, Hg2Cl2 and PbCl2.
Hg2Cl2 and PbCl2 do not form complexes and therefore, do not dissolve.
3. In electroplating. The coordination compounds of Silver and Gold are used as constituents
of electroplating baths for controlled delivery of metal ions for reduction.
4. In water treatment. complex compound like sodium metapolyphosphate are used to remove
Ca2+ and Mg2+ ions from hard water by forming complexes with these ions.
[ 200 ]
Coordination Compounds and Organometallics
5. In dyeing. Mordants are insoluble substances which are uniformly deposited in the fibers to
be dyed. These mordants can then attach to the molecules of the dyes by complex formation
and help in fixing the dye to the fibres in a stable form. The important mordants used are
Fe(OH)3 and Al(OH)3.
Chlorophyll : a complex of Mg 2+ ,
Haemoglobin : a complex of Fe2+ ,
Vitamin B 12 : a complex of Co 3+
7. In metallurgical processes. Complex formation techniques are also used for the extraction
of metal such as Gold and silver.
JE
8. In medicines. Complexing agents are used for removal of metal poisoning. Recently, a
platinum complex cis [PtCl2(NH3)2] known as cisplatin has found use in cancer chemotherapy.
an
9. In catalysis. Certain coordination compounds act as catalysis for different reactions. For
example, Pentacarbonylcobalt(II) acts as a catalyst in the hydrogenation of alkenes. During
hydrogenation, Co(II) is oxidised to Co(III).
ka
Illustration 1: Calculate the overall complex dissociation equilibrium constant for the Cu(NH 3 ) 42 ion,
given that 4 for this complex is 2.1 × 1013.
lp
Overall dissociation constant is the reciprocal of the overall stability constant. Hence,
1 1 14
overall dissociation constant = β 2.1 1013 4.7 10 .
4
Illustration 2: Aqueous copper sulphate solution (blue in colour) gives (i) a green precipitate with
aqueous potassium fluoride, and (ii) a bright given solution with aqueous potassium chloride.
Explain these experiment results.
Solution: Aqueous CuSO 4 solution exists as [Cu(H 2O) 4]SO 4 which has blue colour due to
[Cu(H2O)4]2+ ions.
(i) When KF is added the weak H2O ligands are replaced by F– ligands forming [CuF4]2–
ions which is a green precipitate.
[ 201 ]
Coordination Compounds and Organometallics
(ii) When KCl is added, Cl– ligands replace the weak H2O ligands forming [CuCl4]2– ion
which has bright green colour.
Solution: In CuSO4.5H2O, 4H2O molecules are present as ligand. Crystal field splitting occurs and
hence 4d transition occurs which give it blue colour. In CuSO 4 there are no H 2O
molecules present as ligand. No crystal field splitting occurs and hence it has no colour.
JE
Illustration 4: Arrange the following complexes in the increasing order of conductivity of their solution:
(c) +3 (d) +4
Solution: (a) [x + (0 × 5) + 1] = 2 or x = + 1
lp
Problem 2: For the given complex [CuCl2 (en) (NH3)2]+, the number of geometrical isomers, the number
of optical isomers and total number of isomers of all type possible respectively are
(a) 2, 2 and 4 (b) 2, 2, and 3
(c) 2, 0 and 2 (d) 0, 2 and 2
Problem 3: Excess of silver nitrate solution is added to 100 ml of 0.01 M pentaaquachloromium (III)
chloride solution. The mass of silver chloride obtained in grams is (Atomic mass
of silver is 108)
(a) 287 × 10–3 (b) 143.5 × 10–5
(c) 143.5 × 10–2 (d) 287 × 10–2
[ 202 ]
Coordination Compounds and Organometallics
Problem 4: Both Cu3+ and Pt4+ have a coordination number of six. Which of the following pair of
complexes will show approximately the same electrical conductance for their 0.001 M aqueous
solutions?
(a) CuCl3, 4NH3 and PtCl4, 4 NH3 (b) CuCl3, 3NH3 and PbCl4, 5 NH3
(c) CuCl3, 6NH3 and PtCl4, 5 NH3 (d) CuCl3, 6NH3 and PtCl4, 6 NH3
Problem 5: Which of the following complex ions is expected to absorb visible light?
(a) [Ti(en)2(NH3)2]3+ (b) [Cr(NH3)6]3+
(c) [Zn(NH3)6]2+ (d) [Sc(H2O)3(NH3)3]3+
[At. No. zn = 30, Sc = 21, Ti = 22, Cr = 24]
Problem 6: The ratio of the uncomplexed to the complexed Zn2+ ion in a solution of 10 M NH3 is (Given
that the stability constant of [Zn(NH3)4]2+ is
(a) 3.3 × 10–9 (b) 3.3 × 10–11
(c) 3.3 × 10–13 (d) 3.3 × 10–14
JE
Solution: (d)
Solution: (c)
Solution: (d)
[ 203 ]
Coordination Compounds and Organometallics
1. -bonded organometallics
2. -bonded organometallics
ES
Here we represent Grignard reagent and diethyl Zinc by their empirical formulae. The
actual structures are more complicated. Diethyl zinc is monomeric in solution with C–Zn–
C coordination at Zn-atom.
lp
(iii) Trimethyl aluminium (CH3)3Al. It exists as a dimer with two methyl groups acting as
bridges between two Aluminium atoms.
2. -bonded organometallics. These are usually formed by transition elements. The common examples
are:
[ 204 ]
Coordination Compounds and Organometallics
Cr
Metal Carbonyls
In addition to the above two types of organometallics, there is another important class known as
metal carbonyl in which Carbon monoxide (CO) acts as ligand. These compounds contain both and
character. Some common metal carbonyls are :
(a) Bonding in Metal Carbonyl: The bonding in metal carbonyls involves the following steps :
(i) There is a donation of lone pair of electrons of carbon (of CO) into the suitable empty
orbital of the metal atom. This is a dative overlap and forms a sigma M C bond.
(ii) There is a overlap involving donation of electrons from filled metal d-orbitals into vacant
anti-bonding molecular orbitals of CO. This results in back donation or back bonding.
(b) Bonding in Alkene Complexes: The bonding in alkene complexes involves the following
steps :
(i) The -electron density of alkene is donated into a vacant orbital of metal atom forming
alkene M bond.
(ii) back bonding resulting from the donation of filled d-orbital on the metal into the vacant
antibonding orbital of alkene. As a result of back bonding, the double bond character of
alkene is retained, though the bond becomes weak.
[ 205 ]
Coordination Compounds and Organometallics
There are several methods of forming metal-carbon bonds. We are discussing here methods of some
common organometallic compounds.
(i) Grignard reagents are prepared by the slow addition of organic halide to a stirred
suspension of Magnesium turning (or metal) in the appropriate solvent in the absence of
air and moisture.
M + R–X Ether
R–M–X
(ii) Diethyl zinc is prepared by heating zinc with boiling alkyl halide in an inert atmosphere (CO2
or N2).
JE
(iii) Tetra alkyl organometallics are prepared by treating metal halides with organometallic
reagents:
(a) nC4 H9Br + 2Li Dry
n-C4H9Li + LiBr
ether
an
(i) Metal carbonyls are prepared by the direct interaction of the finely divided metal and
carbon monoxide:
Ni + 4CO Ni(CO)4
200 C
Fe + 5CO Fe(CO)5
high pressure
(ii) Metal carbonyls are prepared by a suitable metal salt and Carbon monoxide in the presence
of reducing agent.
2H
2
2CoCO3 + 8CO CO2(CO)8 + 2Co2 + 2H2O
150 C, high pressure
[ 206 ]
Coordination Compounds and Organometallics
3. Preparation of –Complexes
(i) Zeise's salt is prepared by replacement of less strongly bond ligands such as halide ion
by alkene by directly heating ethylene and [PtCl4]2–
Applications of Organometallics
Organometallic compounds have very extensive applications :
JE
2. As heterogeneous catalysis. Ziegler Natta catalyst (solution of TiCl4 and trialkyl aluminium)
ES
7. Many organometallic compounds are finding applications in agriculture. For example ethyl
mercury chloride (C2H5 HgCl) is used as a fungicide.
8. Organosilicon compounds are used as polymers in silicon rubbers. Because of high thermal
stability, resistance to oxidation and chemical attack Silicon rubber are used in modern surgery
for the production of artificial body parts.
[ 207 ]
Coordination Compounds and Organometallics
Problem 4: In Fe(CO)5, that Fe COσ bond results by the overlap between filled sp hybrid orbital of
C-atom of CO molecule and vacant
(a) d2sp3 (b) sp3
3
(c) dsp (d) dsp2 hybrid orbital of Fe
Solution: (c) Self explanatory
JE
Problem 5: Which of the following carbonyls will have the strongest C – O bond?
(a) Mn(CO)6 (b) Cr(CO)6
[ 208 ]
ADD NOTES HERE :-)
JE
ES
an
ka
lp
ADD NOTES HERE :-)
JE
ES
an
ka
lp
ADD NOTES HERE :-)
JE
ES
an
ka
lp
ADD NOTES HERE :-)
JE
ES
an
ka
lp
ADD NOTES HERE :-)
JE
ES
an
ka
lp
ADD NOTES HERE :-)
JE
ES
an
ka
lp
ADD NOTES HERE :-)
JE
ES
an
ka
lp
ADD NOTES HERE :-)
JE
ES
an
ka
lp
ADD NOTES HERE :-)
JE
ES
an
ka
lp
ADD NOTES HERE :-)
JE
ES
an
ka
lp