Professional Documents
Culture Documents
PC490LCi 11 AESS885 02 EV3
PC490LCi 11 AESS885 02 EV3
HYDRAULIC EXCAVATOR
PC490LCi
Innovative
■ intelligent Machine Control excavator features semi-automatic operation of work
equipment for highly accurate work.
■ Large 12.1" (30.7 cm) monitor neatly displays simultaneous information such as
magnified fine grading view, 3D view, current as-built status, etc.
Integrated
■ Complete factory installed integrated intelligent Machine Control system comes
standard with stroke sensing hydraulic cylinders, Global Navigation Satellite
System (GNSS) components and an Inertial Measurement Unit (IMU) sensor.
All components are validated to Komatsu’s rigid quality & durability standards.
Intelligent
■ intelligent Machine Control excavator allows the operator to focus on moving
material efficiently while semi-automatically tracing the target surface and limiting over-excavation.
■ Facing angle compass, light bar and sound guidance aid in ease of operation and bucket positioning.
4
PC490LCi-11
Conventional
construction
1.0H 1.0H Allowed
(2 person work) 1.0H (2 person work) width
Conven/onal
Construc/on
from design
3.0H surface
Staking
Construc/on
Inspec/on
(100%)
Deviation from allowable value?
Control
point
check
Machine
Control
Machine Control
Surface control based on continuous data
intelligent
intelligent
1.1H
63%
reduc*on
(37%)
Allowed
margin
from design
0.1H 0.4H 0.6H surface
Inspection Inspection Inspection
position position position
* When used by an expert operator, the Komatsu intelligent Machine Control
system increases construction efficiency.
* The above data does not include design time or working data creation time. The above
data are based on in-house construction tests whose conditions may differ from actual
construction. As-Built Surface Track Mapping
Operator can display and check the as-built status and find
where to cut and fill.
5
iNTELLIGENT MACHINE CONTROL
CONTROL BOX
Sound guidance
Enhanced operability of the machine control The operator can recognize the target
Semi-auto/manual mode switching and design surface offset surfaces not only by eyesight, but also by
function can be operated with switches on the control levers. sound. Unique tones can be programmed for
various bucket edge distances from the
target surface.
6
PC490LCi-11
Control box
A large, easy-to-view monitor and
unique interface designed for
Komatsu intelligent Machine Control.
GNSS antenna
Stroke sensing
hydraulic cylinder
A stroke sensor is built into
the cylinder. This sensor
provides accurate, real time
bucket position which is
immediately displayed on the
control box, speeding up your
work.
Inertial Measurement
Unit (IMU)
Inertial Measurement Unit
(IMU) detects machine
posture for high accuracy GNSS receiver
finishing work.
Sitelink 3D Enterprise
The Sitelink 3D Enterprise connects the office and machine via a network, visualize the worksite clearly.
Transmission of design Sending messages from
data from office to office to machine or vice
machine versa
8
PC490LCi-11
7% UP
1 Large counterweight 6 Reinforced center frame
2 High capacity swing 7 HD carrier rollers and 256 kN(26.1t) 275 kN(28.0t)
bearing idlers (with Power Max.)
33 Reinforced track links 8 Reinforced crawler frames Measured with Power Max. function, 3380 mm arm and ISO rating
and shoes 9 Reinforced revolving frame
4 Large final drive 10 Track roller guards
5 HD sprockets 11 Deck guard
Faster arm cycle speeds
12 Center frame swivel guard Two return hoses improve arm cylinder hydraulic flow for
faster arm out performance.
11
9
3
7 5 6
4
8
12
10
Work priority
P P mode
Fuel priority
E E mode
L L mode
B B mode
Work priority
11
WORKING ENVIRONMENT
Indicators
1 Auto-decelerator 8 Fuel gauge
2 Working mode 9 DEF level gauge
1 2 3 3 Travel speed 10 Service meter, clock
4 Ecology gauge 11 Fuel consumption gauge
4 5 6 5 Camera display 12 Guidance icon
6 Engine coolant 13 Function switches
temperature gauge 14 Camera direction display
7 Hydraulic oil 15 DEF level caution
temperature gauge lamp
7
Basic operation switches
1 Auto-decelerator 4 Buzzer cancel
2 Working mode selector 5 Wiper
3 Travel speed selector 6 Window washer
7 Auto climate controls
1 2 3 4 5 6 7
13
WORKING ENVIRONMENT
PC490LCi-11
14
PC490LCi-11
MAINTENANCE FEATURES
15
MAINTENANCE FEATURES
Maintenance screen
Large capacity air cleaner
Large capacity air cleaner is comparable to that of larger Manual Stationary Regeneration
machines. The larger air Under most conditions, active regeneration will occur
cleaner can extend air cleaner automatically with no effect on machine operation. In case
life during long-term operation the operator needs to disable active regeneration or initiate
a manual stationary regeneration, this can be easily
and helps prevent early
accomplished through the monitor panel. A soot level
clogging, and resulting power
indicator is displayed to show how much soot is trapped
loss. A radial seal design is in the KDPF.
used for reliability. Soot level indicator
16
PC490LCi-11
GENERAL FEATURES
ROPS CAB STRUCTURE
Large mirrors
Slip-resistant plates
Silicon
Oil
17
KOMATSU PARTS &
SERVICE SUPPORT
KOMATSU CARE Komatsu CARE® – Extended Coverage
Program Includes:
*The PC490LCi-11 comes standard with complimentary
■ Extended Coverage can provide peace of mind by
factory scheduled maintenance for the first 3 Years or 2,000 protecting customers from unplanned expenses that
Hours, whichever comes first. effect cash flow
Planned Maintenance Intervals at: ■ Purchasing extended coverage locks-in the cost of
500/1000/1500/2000 hour intervals. (250 hr. initial interval for covered parts and labor for the coverage period and
some products) Complimentary Maintenance Interval includes: helps turn these into fixed costs
Replacement of Oils & Fluid Filters with genuine Komatsu Parts,
50-Point inspection, Komatsu Oil & Wear Analysis Sampling
PC490LCi-11
KOMTRAX EQUIPMENT
MONITORING GET
THE
WHO
LE S
TOR
YW
ITH
WHEN ®
20
PC490LCi-11
DIMENS IONS
Arm Length 3380 mm 11'1" 4000 mm 13'1"
A Overall length 11930 mm 39'2" 11950 mm 39'2" J
For best semi-automatic machine control performance, observe maximum attachment weights:
■ 3350 kg 7,385 lb maximum for 3380 mm 11’ 1" standard arm assembly
■ 3200 kg 7,054 lb maximum for 4000 mm 13’ 1" standard arm assembly
Exceeding recommended attachment weights may negatively impact performance and accuracy of semi-automatic function.
- Used with material weights up to 3,500 lb/yd3 – Quarry/rock/high abrasion applications - Used with material weights up to 3,000 lb/yd3 – Tough digging applications
£ - Used with material weights up to 2,500 lb/yd3 – General construction - Used with material weights up to 2,000 lb/yd3 – Light materials applications
X - Not useable
21
SPECIFICATIONS
WORKING RANGE
H
(m)
12
11
10
9
PC490LCi-11
8
7
6
A 5
B 4
3
2
1
0 G.L
-1
-2
-3
D
E -4
C
-5
-6
-7
-8
-9
(m)13 12 11 10 9 8 7 6 5 4 3 2 1 0
2.44
G
F
E Max. digging depth for 8' level bottom 7615 mm 25'0" 8250 mm 27'0"
239 kN 239 kN
Bucket digging force at power max.
SAE rating
205 kN 184 kN
Arm crowd force at power max.
20900 kg / 46,080 lb 18800 kg / 41,450 lb
275 kN 275 kN
Bucket digging force at power max.
ISO rating
214 kN 190 kN
Arm crowd force at power max.
21800 kg / 48,060 lb 19400 kg / 42,770 lb
22
PC490LCi-11
LIFT CAPACITIES
23
STANDARD EQUIPMENT
■ 3 speed travel with auto shift ■ Extended work equipment grease interval ■ Revolving frame deck guard
■ Alternator, 90 Ampere, 24V ■ Fan guard structure ■ Revolving frame undercovers
■ AM/FM radio ■ Fuel priming pump, 24V ■ ROPS cab (ISO12117-2)
■ Arm holding valve ■ Fuel system pre-filter 10 micron ■ Seat belt indicator
■ Automatic engine warm-up system ■ Grease sealed track chain ■ Seat belt, retractable, 76mm 3"
PC490LCi-11
■ Automatic climate control/air ■ High back air suspension seat, with heat ■ Secondary engine shutoff switch
■ Auto idle shut down, programmable ■ KOMTRAX® Level 5.0 ■ Slip resistant foot plates
■ Auxiliary input (3.5mm jack) ■ Large LCD color monitor, high resolution ■ Starter motor, 11.0kW/24V x 1
■ Battery master disconnect switch ■ Mirrors, (LH and RH) ■ Thermal and fan guards
■ Boom holding valves ■ Operator Protective Top Guard (OPG), ■ Track frame swivel guard
■ Converter, (2) x 12V ■ Operator identification system ■ Track rollers, 8 (each side)
■ Counterweight, 9573 kg 21,105 lb ■ Pattern change valve (ISO to BH control) ■ Track shoes, triple grouser, 700mm 28"
■ Dry type air cleaner, double element ■ Power maximizing system ■ Travel alarm
■ Electric horn ■ PPC hydraulic control system ■ Two boom mode settings
■ Engine, Komatsu SAA6D125E-7 ■ Pump/engine room partition cover ■ Working lights, 2 (boom and RH front)
■ Engine coolant to -25°C -13°F ■ Radiator and oil cooler dustproof net ■ Working mode selection system
OPTIONAL EQUIPMENT
■ Arms ■ Cab guards ■ Revolving frame undercovers, heavy duty
– 3380 mm 11'1" arm assembly – Lower front window guard ■ Revolving frame undercovers, severe duty
– 3380 mm 11'1" arm assembly with piping – Full front guard, OPG Level 1 ■ Sun visor
– 4000 mm 13'1" arm assembly – Full front guard, OPG Level 2 ■ Straight travel pedal
■ Booms – Bolt-on top guard, OPG Level 2 ■ Track roller guards, full length
– 7000 mm 23'2" HD boom assembly ■ Counterweight removal system ■ Track shoes, triple grouser, 800 mm 31.5"
– 7000 mm 23'2" HD boom assembly ■ High altitude arrangement ■ Track shoes, triple grouser, 900 mm 35.5"
with piping ■ High pressure in-line hydraulic filters ■ Working lights, front, two additional
ATTACHMENT OPTIONS
■ Hydraulic couplers For a complete list of available
■ Hydraulic kits, field installed attachments, please contact your local
■ Load hold, anti-burst valves Komatsu distributor.
AESS885-02 ©2018 Komatsu America Corp. Printed in USA AD07(1.5M)OTP 07/20 (EV-3)