Professional Documents
Culture Documents
PC210LCi-11
Tier 4 Final Engine
HYDRAULIC EXCAVATOR
PC210LC/PC210LCi
Innovative
■ intelligent Machine Control excavator features semi-automatic operation
of work equipment for highly accurate work.
N EW ■ Compact 10.4" IMC monitor with increased memory capacity,
Integrated
■ Complete factory-installed and integrated intelligent Machine Control
system comes standard with stroke sensing hydraulic cylinders,
multiple Global Navigation Satellite System (multi-GNSS) components
and an Inertial Measurement Unit (IMU) sensor. All components are
validated to Komatsu’s rigid quality and durability standards.
N EW ■ Multi-band UHF/915SS radio improves job site flexibility.
Intelligent
■ intelligent Machine Control excavator allows the operator to focus on moving material efficiently while semi-automatically
tracing the target surface and limiting over-excavation.
■ Facing angle compass, light bar and sound guidance aid in ease of operation and bucket positioning.
N EW ■ Bucket Angle Hold and optional Auto-Tilt Control increase ease of operation and improve productivity and efficiency.
e.g. PC210LCi-10
e.g. PC210LCi-10
e.g. PC210LCi-10
• Minimum distance control
• Auto grade assist The intelligent Machine Control excavator
With the auto grade assist function, the controls the bucket by automatically
operator moves the arm, the boom adjusts selecting the point on the bucket closest
e.g. PC210LCi-10
the bucket height automatically, tracing the to the target surface. Should the
target surface and minimizing digging too • Auto stop control machine not be facing a sloped surface
deep. This allows the operator to perform During boom or bucket operation, the at a right angle, it will still follow the
rough digging without worrying about the work equipment automatically stops target surface and minimize digging
design surface, and to perform fine digging when the bucket edge reaches the below it.
by operating the arm lever only. The working design surface, thus minimizing damage
range is extended by holding the lever to to the design surface.
move the boom downward.
4
PC210LC-11/PC210LCi-11
Conventional
Con
construction
trol a Allowed
rea width
from design
surface
Machine Control
Surface control based on continuous data
3.0H
Staking
Construc/on
Inspec/on
(100%)
1.1H
63%
reduc*on
(37%)
0.1H
0.4H
0.6H
* When used by a qualified iMC operator, the Komatsu intelligent Machine Control
system increases construction efficiency.
* The above data does not include design time or working data creation time.
The above data is based on in-house construction tests, performed by Komatsu,
whose conditions may differ from actual construction.
5
iNTELLIGENT MACHINE CONTROL
CONTROL BOX
The monitor of the Komatsu intelligent Machine Control (control box) uses a compact 10.4" screen for visibility and ease of use. The simple screen layout
displays the necessary information in an easily understood fashion. Touch screen icon interface instead of multi-step menu simplifies operation.
6
PC210LC-11/PC210LCi-11
multi-GNSS antenna
Stroke sensing
hydraulic cylinder
A stroke sensor is built into
the cylinder. This sensor
provides accurate, real time
bucket position which is
immediately displayed on the
control box, speeding up your
work.
Inertial Measurment
Unit (IMU)
High accuracy in the finishing
work is secured by Inertial GNSS receiver
Measurement Unit (IMU) Photos may include optional equipment.
detecting the machine posture.
7
iNTELLIGENT MACHINE CONTROL
Give your operators the power to work more effectively than with conventional aftermarket machine guidance
(indicate only) or manual operation. Intelligent Machine Control (iMC) excavators with semi-automatic control
offer the capability to work smart from rough digging to finish grading, and help minimize over-excavation to
make every pass count.
8
PC210LC-11/PC210LCi-11
9
PERFORMANCE FEATURES
Work priority
P P mode
Fuel priority
E E mode
L L mode
B B mode
Work priority
ATT/P ATT/P mode
Fuel priority
ATT/E ATT/E mode
10
PC210LC-11/PC210LCi-11
11
WORKING ENVIRONMENT
PC210LC-11/PC210LCi-11
Arm rest with simple height adjustment function Remote intermittent wiper
A knob and plunger on the with windshield washer Magazine box & cup holder
12
PC210LC-11/PC210LCi-11
Indicators
1 Auto-decelerator 8 Fuel gauge
2 Working mode 9 DEF level gauge
3 Travel speed 10 Service meter, clock
1 2 3 4 Ecology gauge 11 Fuel consumption gauge
5 Camera display 12 Guidance icon
4 5 6 6 Engine coolant 13 Function switches
temperature gauge 14 Camera direction display
7 Hydraulic oil 15 DEF level caution
temperature gauge lamp
13
WORKING ENVIRONMENT
14
PC210LC-11/PC210LCi-11
MAINTENANCE FEATURES
Centralized engine check points Battery
Locations of the engine oil check and filters are integrated disconnect switch
into one side to allow easy maintenance and service. A standard battery
disconnect switch
Engine oil filter allows a technician to
disconnect the power
supply and lock out
before servicing the machine.
PC210LC-11 Shown
15
MAINTENANCE FEATURES
Long-life oils, filters Maintenance Information
High performance filters are used in the
hydraulic circuit and engine. By increasing “Maintenance time caution lamp” display
the oil and filter replacement intervals, When the remaining time to maintenance becomes less than
30 hours*, a maintenance time monitor appears. Pressing
maintenance costs can be significantly
the F6 key switches the monitor to the maintenance screen.
reduced. * : The setting can be changed within the range between 10 and 200 hours.
(Ecology-white element)
Hydraulic oil every 5000 hours
Hydraulic oil filter every 1000 hours
DEF pump filter every 2000 hours
Maintenance screen
of access.
Supports the DEF level and refill timing
The DEF level gauge is displayed continuously on the right
side of the monitor screen. In addition, when DEF level is
low, DEF low level guidance messages appear in pop up
displays to inform the operator in real time.
DT-type connectors
Sealed DT-type Waterproof seal
electrical connectors
provide high reliability, Waterproof seal
water and dust
resistance.
Waterproof seal
16
PC210LC-11/PC210LCi-11
GENERAL FEATURES
ROPS CAB STRUCTURE
Large mirrors
Slip-resistant plates
Silicon
Oil
17
KOMATSU PARTS &
SERVICE SUPPORT
KOMATSU CARE Komatsu CARE® – Extended Coverage
Program Includes:
*The PC210LC-11 and PC210LCi comes standard with compli-
■ Extended Coverage can provide peace of mind by
mentary factory scheduled maintenance for the first 3 Years or protecting customers from unplanned expenses that
2,000 Hours, whichever comes first. effect cash flow
■ Purchasing extended coverage locks-in the cost of
Planned Maintenance Intervals at:
500/1000/1500/2000 hour intervals. (250 hr. initial interval for covered parts and labor for the coverage period and
some products) Complimentary Maintenance Interval includes: helps turn these into fixed costs
Replacement of Oils & Fluid Filters with genuine Komatsu Parts,
50-Point inspection, Komatsu Oil & Wear Analysis Sampling
PC210LC-11/PC210LCi-11
KOMTRAX EQUIPMENT
MONITORING GET
THE
WHO
LE S
TOR
YW
ITH
WHEN ®
standard equipment
- any time, anywhere
on all Komatsu
construction products
For construction and compact equipment. For production and mining class machines.
19
SPECIFICATIONS
ENGINE SWING SYSTEM
Model................................................... Komatsu SAA6D107E-3* Drive method............................................................ Hydrostatic
Type.................................Water-cooled, 4-cycle, direct injection Swing reduction................................................... Planetary gear
Aspiration............................... Variable Geometry Turbocharged, Swing circle lubrication....................................... Grease-bathed
aftercooled, cooled EGR Service brake........................................................ Hydraulic lock
Number of cylinders................................................................. 6 Holding brake/Swing lock........................ Mechanical disc brake
Bore......................................................................107 mm 4.21" Swing speed................................................................. 12.4 rpm
PC210LC-11/PC210LCi-11
(Number of cylinders – bore x stroke x rod diameter) Operating weight includes 5700 mm 18'8" one-piece boom,
Boom... 2–130 mm x 1334 mm x 90 mm 5.1" x 52.5" x 3.5" 2925 mm 9'7" arm, SAE heaped 1.19 m3 1.57 yd 3 bucket,
Arm.......1–135 mm x 1490 mm x 95 mm 5.3" x 58.7" x 3.7" rated capacity of lubricants, coolant, full fuel tank, operator,
Bucket...1–115 mm x 1105 mm x 80 mm 4.5" x 43.5" x 3.2" and standard equipment.
Ground Pressure
Triple-Grouser Shoes Operating Weight (ISO 16754)
DR IVES AND BR AKES 700 mm 24160 kg 0.47 kg/cm2
Steering control.......................................Two levers with pedals 28" 53,265 lb 6.7 psi
DIMENS IONS
For best PC210LCi-11 semi-automatic machine control performance, observe maximum attachment weight:
■ 1600 kg 3,528 lb maximum for 2925 mm 9'7" standard arm assembly
Exceeding recommended attachment weights may negatively impact performance and accuracy of semi-automatic function.
- Used with material weights up to 3,500 lb/yd3 – Quarry/rock/high abrasion applications - Used with material weights up to 3,000 lb/yd3 – Tough digging applications
£ - Used with material weights up to 2,500 lb/yd3 – General construction - Used with material weights up to 2,000 lb/yd3 – Light materials applications
X - Not useable
21
SPECIFICATIONS
WORKING RANGE
(m) H
12
11
10
9
PC210LC-11/PC210LCi-11
8
7
6
A 5
4
B
3
2
1
0 G.L.
-1
-2
C E D -3
-4
-5
-6
-7
11 10 9 8 7 6 5 4 3 2 1 0
(m) 2.44
G
F
132 kN
Bucket digging force at power max.
SAE rating
13500 kg / 29,762 lb
103 kN
Arm crowd force at power max.
10500 kg / 23,149 lb
149 kN
Bucket digging force at power max.
ISO rating
15200 kg / 33,510 lb
108 kN
Arm crowd force at power max.
11000 kg / 24,251 lb
22
PC210LC-11/PC210LCi-11
LIFT CAPACITIES
LIFTING CAPACITY WITH LIFTING MODE
A A: Reach from swing center Conditions:
B: Bucket hook height • 5700 mm 18' 8" one-piece boom
C: Lifting capacity • Counterweight: 4370 kg 9,634 lb
Cf: Rating over front • Bucket: None
B Cs: Rating over side • Lifting mode: On
: Rating at maximum reach
C
23
STANDARD EQUIPMENT
■ 3 Speed travel with Auto shift ■ Extended work equipment grease interval ■ Revolving frame deck guard
■ Alternator, 90 Ampere, 24V ■ Fan guard structure ■ Revolving frame undercovers
■ AM/FM radio ■ Fuel system pre-cleaner 10 micron ■ ROPS cab
■ Automatic engine warm-up system ■ High back air suspension seat, with heat ■ Seat belt, retractable, 76 mm 3"
■ Auto Idle Shutdown (programmable) ■ Large LCD color monitor, high resolution ■ Service valve
■ Lever lock Auto-lock ■ Lock lever ■ Shoes, triple grouser, 800 mm 31.5"
■ Batteries, large capacity ■ Operator Protective Top Guard (OPG), ■ Slip resistant foot plates
■ Boom and arm holding valves ■ Operator Identification System ■ Suction fan
■ Carrier rollers (2 each side) ■ Pattern change valve (ISO to BH control) ■ Thermal and fan guards
■ Counterweight, 4370 kg 9,634 lb ■ PPC hydraulic control system ■ Track frame swivel guard
■ Dry type air cleaner, double element ■ Pump/engine room partition cover ■ Travel alarm
■ Electric horn ■ Radiator and oil cooler dustproof net ■ Working lights, 2 (boom and RH front)
OPTIONAL EQUIPMENT
■ Additional front working lights, ■ Cab guards ■ Komvision
2 cab roof lights – Full front guard, OPG Level 1 ■ Rain visor
■ Arm
– Full front guard, OPG Level 2 ■ Revolving frame undercovers, heavy duty
– 2925 mm 9'7" HD arm assembly – Bolt-on top guard, OPG Level 2 ■ Shoes, triple grouser, 700 mm 28"
– 2925 mm 9'7" HD arm assembly ■ High pressure in-line hydraulic filters ■ Straight travel pedal
ATTACHMENT OPTIONS
■ ATB IMU, field install kit ■ Super long fronts
■ Cab air pre-cleaner ■ PSM thumbs For a complete list of available
■ Rockland thumbs
■ Hydraulic couplers attachments, please contact your local
■ Vandalism protection guards with storage box
■ Hydraulic kits, field installed Komatsu distributor.
■ Komvision, field install kit
EN-PC210LCi-11BR02-0121-V1 ©2021 Komatsu America Corp. AD01 Electronic View Only (EVO) 01/21 (EV-1)