Professional Documents
Culture Documents
SECTION 10190
CUBICLES
PART 1 - GENERAL
1.2 SUMMARY
1.3 DEFINITIONS
A. IV: Intravenous.
Cubicles 10190 - 1
PROJECT NAME
1.5 SUBMITTALS
D. Samples for Initial Selection: For each type of curtain fabric indicated.
Cubicles 10190 - 2
PROJECT NAME
Cubicles 10190 - 3
PROJECT NAME
PART 2 - PRODUCTS
2.1 MANUFACTURERS
A. Extruded-Aluminum Track: Not less than 1-1/4 inches wide by 3/4 inch
high (31.8 mm wide by 19 mm high); with minimum wall thickness of
0.058 inch (1.473 mm).
B. PVC Track: Not less than 1-1/4 inches wide by 15/16 inch high (31.8
mm wide by 23.8 mm high).
Cubicles 10190 - 4
PROJECT NAME
D. Curtain Carriers: Two nylon rollers and nylon axle with chrome-plated
steel hook.
Cubicles 10190 - 5
PROJECT NAME
2.4 CURTAINS
1) Pattern: minimal
2) Color: As selected by Architect from manufacturer's
full range.
3) Delete first paragraph below if not required. No. 50
mesh is an open weave with openings of approximately
1/2 inch (13 mm); No. 40 mesh is an open weave with
openings of approximately 1/4 inch (6 mm); No. 42 mesh
is closely woven with very small openings. Verify
acceptability with authorities having jurisdiction.
Cubicles 10190 - 6
PROJECT NAME
F. PVC Strip Curtain Drop: 16 inches (406 mm) long, with chrome-plated
steel hook.
5. Top Hem: Not less than 1 inch (25.4 mm) and not more than 1-1/2
inches (38 mm) wide, triple thickness, reinforced with integral web,
and double lock stitched.
6. Mesh Top: Top hem not less than 1 inch (25.4 mm) and not more
than 1-1/2 inches (38 mm) wide, triple thickness, reinforced with
integral web, and double lock stitched. Double lock stitch bottom
of mesh directly to 1/2-inch (12.7-mm) triple thickness, top hem of
curtain fabric.
Cubicles 10190 - 7
PROJECT NAME
7. Bottom Hem: Not less than 1 inch (25.4 mm) and not more than 1-
1/2 inches (38 mm) wide, double thickness and single lock
stitched.
8. Side Hems: Not less than 1/2 inch (12.7 mm) and not more than 1-
1/4 inches (31.8 mm) wide, with double turned edges, and single
lock stitched.
9. Vertical Seams: Not less than 1/2 inch (12.7 mm) wide, double
turned and double stitched.
PART 3 - EXECUTION
3.1 INSTALLATION
Cubicles 10190 - 8
PROJECT NAME
1. Provide one safety loading unit for each [bed] [pair of beds with
locking switch unit].
2. Provide one locking switch unit for each pair of beds.
3.2 DEMONSTRATION
3.3 PROTECTION
Cubicles 10190 - 9