Professional Documents
Culture Documents
Congratulations, and welcome to the fabulous world of NX4520 / NX5020 / NX5520 / NX6020 ownership,
where serious work is made fun again!
This versatile tractor is a culmination of the entire tractor and diesel engine knowledge gained by the Dae-
dong Industrial Co.,LTD over the years since 1947. The NX4520 / NX5020 / NX5520 / NX6020 and has
been designed with the finest materials and under rigid quality control standards set forth by the KIOTI En-
gineering Department.
Knowledge of tractor operation is essential for many years of dependable service and reliability. To help new
owner's familiarize themselves with the KIOTI NX4520 / NX5020 / NX5520 / NX6020, it is the policy of KIO-
TI tractor to provide an owner's manual which includes helpful information about tractor safety, operation and
maintenance. If the information you seek is not found in this manual, your KIOTI tractor dealer will be happy
to help you.
Please feel free to contact DAEDONG IND. CO.,LTD with your questions/concerns.
This manual was compiled in compliance with the ISO 3600, standards and the instructions contained here comply with
the requirements of the Machinery Directive 2010/52/EU in force in the European Community. For tractors sold or used
outside the European Community, local laws will prevail.
Main protections on the tractors discussed in this manual.
DESCRIPTION NON CABIN CABIN
SAFETY PRECAUTIONS................................. 1
SPECIFICATIONS............................................. 3
SECTION OPERATION..................................................... 5
MAINTENANCE................................................ 7
TROUBLESHOOTING...................................... 9
INDEX............................................................... 10
Adjustment of LIFT ROD.......................................... 6-5 how to open the hood (A)..................................... 7-7
Adjustment of Top link ......................................... 6-6 Checking and adding fuel (B)................................ 7-7
Precaution for installing How to use Checking Transmission Fluid Level (C)............. 7-9
top link holes......................................................... 6-6
Checking engine oil level (D)............................. 7-10
Adjustment of stabilizer...................................... 6-7
Checking Front axle oil level (N1)....................7-11
Draft hitch and trailer......................................... 6-8
Checking Coolant Level (E)................................ 7-12
INSTALLING PTO SHAFT................................................ 6-9
Cleaning Grill, Radiator SCREEN (F)................ 7-12
Handling loader ............................................. 6-11 CHECKING BRAKE AND CLUTCH PEDALS (G).......... 7-13
Checking Gauges, Meter and Easy
fixation points for front end loader . ........ 6-12 Checker (H)............................................................. 7-13
Driving on slope..................................................... 6-13 Checking Head Light, Hazard Light etc. (I)..... 7-13
Joystick lever......................................................... 6-14 Checking Seat Belt(J)............................................. 7-13
Joystick valve.......................................................... 6-17 Changing engine oil and replacing filter (K)..... 7-14
Replacing transmission fluid and filter (L)....7-16
MAINTENANCE....................................................7-1 Changing front axle case oil (M)..................... 7-18
Maintenance check list.................................. 7-3 Adjusting Brake Pedal (N)................................... 7-19
Lubricating Grease Fittings (O)........................ 7-20
Daily check chart..................................................... 7-3 Checking Wheel Bolt/nut Torque (P)............... 7-21
maintenance schedule chart.............................. 7-4 Adjusting Clutch Pedal (Q)................................. 7-21
Adjusting fan belt tension (T)........................... 7-24 slow blow fuse (AN)............................................... 7-42
Battery (U).................................................................. 7-25 Replacing bulb (AO)................................................ 7-43
checking intake air line (V)................................. 7-27 Checking refrigerant (AP).................................. 7-49
Adjusting Toe-in (W)............................................... 7-27
Checking Radiator Hose and Clamp (X)........... 7-28 storage AND DISPOSAL.................................8-1
Power steering line (Y)........................................ 7-29 Tractor storage............................................... 8-2
Air CondiTIONER BELT TENSION (Z)....................... 7-30
Cleaning air conditioner condenser (AA).... 7-30 Daily storage............................................................. 8-2
Adjusting Front Axle pivot (AB)........................ 7-31 Long-term storage.................................................. 8-2
Adjusting Engine Valve Clearance (AC)......... 7-31
Using tractor after storage...................... 8-4
Replacing air cleaner filter (AD) ................... 7-32
Checking air conditioner hose (AE)................ 7-33 Usage and disposal . ....................................... 8-5
Checking caB cushion rubber (AF)................... 7-33
TROUBLESHOOTING..........................................9-1
replacing air filter (AG)..................................... 7-33
Flush cooling system and changing Engine Troubleshooting................................ 9-2
coolant (AH)........................................................... 7-33
Tractor Troubleshooting............................ 9-4
Anti-freeze (AH1)...................................................... 7-35
FUEL FILTER (Ai)........................................................... 7-35 INDEX.................................................................10-1
Bleeding fuel system (AJ).................................... 7-36
Draining water from clutch housing (AK)... 7-38
Checking & replacing wiper (AL)....................... 7-38
Replacing Fuse (aM)................................................ 7-40
Various universal symbols have been used on the instruments and controls of your KIOTI tractor. Below is a
list of the universal symbols and their meanings.
1
1
Precautions before operation....................... 1-2
General precautions..........................................................1-2
Safety precautions
when using the loader................................. 1-17
T66O101a T66O102a
www.servicemanualbit.com