Professional Documents
Culture Documents
First, when I call an m6 t... D... command it goes to the locationwhere it changed tools for the ATC. I would
like it to just raise up in z axis to a set Z height location. Where are those parameters located to make the
necessar changes?
Second issue might be related to the problem above. The push button for the power drawbar on the front of
the machine isn't active. Where are the parameters for that located.
Suggestion
To thank
Quote
Answer
8/4/2014 11:19 AM
Rate (0)
pierre_g Hello,
MD10715 $MN_M_NO_FCT_CYCLE[X]=6
MD10716 $MN_M_NO_FCT_CYCLE_NAME[X]=
Pierre
Advanced Member
Joined: 7/3/2009
Last visit: 2/25/2015
Posts: 67
Rating:
(4)