Professional Documents
Culture Documents
MyLaps Handheld Tutorial
MyLaps Handheld Tutorial
TIMING
1
CONTACT INFORMATION
www.amb-it.com
2
CONTENTS
1. INTRODUCTION............................................ 4
1.1 System requirements................................... 4
1.2 Installing the software................................. 4
APPENDIX A.
CONNNECTING PDA TO WIFI NETWORK.......... 11
3
1. INTRODUCTION
4
Alternatively you can copy the file “MyLapsHandheld\
MyLapsHandheld.cab” to the Pocket PC and open it
from there. Using the Pocket PC, tap on the copied
“MyLapsHandheld.cab” file to start the installation of
MyLaps Handheld.
5
2. CONNECTING MYLAPS
HANDHELD
6
While the program tries to connect, you will see the
following screen:
7
After starting and connecting MyLaps Handheld, the
program will always try to (re)connect with the settings
you entered in the first screen (see image on page 6).
When the connection fails (you might be out of the range
of the network) you will no longer receive results but
MyLaps Handheld wil try to reconnect every 10 seconds.
If you want to connect to another network (on another
track) you have to close and restart the program.
8
3. NAVIGATING MYLAPS
HANDHELD
File
Minimize Hides MyLaps Handheld but
the program is still running.
Exit Stops running MyLaps
Handheld.
View
Refresh Refreshes the current
screen.
Go
Home Brings you back to the
MyLaps Handheld homepage.
Cache Displays on overview of
cached results.
9
Go to page Go to one of the results pages:
Startpage The startpage of the live
official result screens.
Schedule Result screen that displays the
event schedule
Run information Result screen that displays the
current session information
Overall results Result screen that displays the
results off the current session.
Announcements Result screen that displays the
session’s announcements.
10
APPENDIX A.
CONNECTING PDA TO
WIFI NETWORK
11
You will be presented with the screen below. Tap and hold
the stylus on the name of the network you want to connect
to. Select the “connect” option in order to connect. Tap on
the name of the network to set the appropriate (security)
settings if applicable. After tapping “ok” the pda will try to
connect to the WIFI network.
12
Additionaly you might have to configure the ip-adress of
the WIFI network adapter. To do so select the “Network
Adapters” tab in the “Configure Wireless Networks”
screen. Make sure the tab “IP Address” is selected. In
most cases the option “Use server-assigned IP adress”
must be selected.
13