You are on page 1of 1

DATA SHEET

Three Phase Induction Motor - Squirrel Cage


Customer :

Product line : IP55 - W22 - IE3 Premium Efficiency

Frame : 355M/L Locked rotor time : 20 s (hot) 36 s (cold)


Output : 220 kW Temperature rise4 : 60 K
Poles : 4 Duty cycle : S1
Frequency : 60 Hz Ambient temperature : -20 °C to +60 °C
Rated voltage : 400 V Altitude : 1000 m.a.s.l
Rated current : 379 A Degree of protection : IP55
L. R. Amperes : 2767 A Cooling method : IC411 - TEFC
LRC (p.u.) : 7.3 Mounting : B3T
No load current : 132 A Direct of rotation¹ : Both
Rated speed : 1790 rpm Noise level² : 78.0 dB(A)
Slip : 0.56 % Starting method : Direct On Line
Rated torque : 1174 Nm Approx. weight³ : 1519 kg
Locked rotor torque : 250 % Design : N
Pull up torque : 210 %
Breakdown torque : 240 %
Insulation class : F
Service factor : 1.00
Moment of inertia (J) : 7.20 kgm²
Output Start 50% 75% 100% Load type : Parabolic torque
Efficiency (%) - 95.6 96.2 96.4 Load torque : 1383 Nm
Power factor 0.33 0.77 0.84 0.87 Load inertia (J=GD²/4) : 7.2 kgm²
Drive end Non drive end Foundation loads
Bearing type NU-322-C3 6319-C3 Maximum traction : 11031 N
Lubrication interval 1600 h 3000 h Maximum compression : 25932 N
Lubricant amount 60 g 45 g
Lubricant type MOBIL POLYREX EM
Notes:
The vibration and noise level informed are valid when motor is operating with roller bearings respecting their minimum radial
load. Thus, WEG reserves the right to test the motor with ball bearings.
Standards

Specification : IEC 60034-1 Vibration : IEC 60034-14


Tests : IEC 60034-2 Tolerance : IEC 60034-1
Noise : IEC 60034-9
This revision replaces and cancels the previous one, which must be eliminated. These are average values based on tests with sinusoidal
(1) When viewed from the drive end. power supply, subject to the tolerances stipulated in IEC
(2) Measured at 1m and with tolerance of +3dB(A). 60034-1.
(3) Approximate weight subject to changes after manufacturing process.
(4) At the rated point.

Rev. Summary of changes Performed Checked Date

Performed by pmiguelote 314913/2018


Checked by e-acatarina Page Revision
Date 26/03/2018 1/1 0
This document is exclusive property of WEG S/A. Reprinting is not allowed without written authorization.

You might also like