Professional Documents
Culture Documents
Manual Light v3 DiagramEN
Manual Light v3 DiagramEN
X1 2 Black LIN-Input
1 White LIN-Output
3 11 Orange/Black CAN2-L/CH2
X3
(-)
2 10 Brown/White INP3 – «Front hood switch»
(-)
1 9 Blue INP4 – «Neutral/Handbrake input»
X2 Analog temperature sensor
micro-USB Black GROUND (-)
(+)
WARNING! The main unit is designed to operate IT IS FORBIDDEN to install the temperature sensor at Blue/White INP5 – «Brake pedal» /«Fuel level input»
at temperatures from -40°C to +85°C, the degree the place where temperature is higher than the 200 mA (-)
of protections is IP40. operating range of the sensor (+125°C) and cable Green CH3 – «Turn indicators»
(+80°C). (-)
Grey INP2 – «Doors switch»
WARNING! Do not shield the built-in antenna (Keep minimum 150mA (-)
distance of 20mm from metal parts) Yellow/White
CAN1-H
X3 X1 X4 X5 X6 X7 X2 Orange/White
R20 (-) 200mA CAN1-L
Red/Black CH5 – «Open trunk» output
32 PA N D O R A L I G H T V 3 U S E R A N D(Uamp3...100V,
White I N S TA Lmin
L AT
8Hz)I O N M A N UA L
«Tachometer input» 33