Professional Documents
Culture Documents
MMB-EU90-13910
Software Description
CURRENCY:
DIP SWITCHES SETTING: After power on Recycling cassette indicator shows control firmware version:
F1 -> 39
Default After initialization indicator shows number of bills inside of the recycling
SW. #1 ON state OFF state cassette.
Setting
SW1.1 5 EUR Disabled 5 EUR Enabled OFF
SW1.2 10 EUR Disabled 10 EUR Enabled OFF
FEED/UNLOAD BUTTONS:
SW1.3 20 EUR Disabled 20 EUR Enabled OFF
SW1.4 50 EUR Disabled 50 EUR Enabled OFF The Feed button is used for setting a Loading mode. This mode makes the
SW1.5 Reserved Reserved OFF entered bills of a selected denomination to be loaded into the recycling
SW1.6 Reserved Reserved OFF cassette. To cancel a loading mode, the Feed button must be pressed again. If
SW1.7 Reserved Reserved OFF bills do not enter within 20 seconds, the loading mode will be canceled
SW1.8 Reserved Reserved OFF automatically.
SW. #2 ON state OFF state
SW2.1 Reserved Reserved OFF The Unload button is used for dispensing one bill from the recycling cassette.
SW2.2 BV Addr 41/PO Addr 9 BV Addr 40/PO Addr 10 OFF It works in Service mode only.
SW2.3 Reserved Reserved OFF
If the Feed and Unload buttons are pressed simultaneously, then all bills will be
To work with a “Host
SW2.4 Service Mode OFF unloaded from the recycling cassette into the drop cassette.
Machine Controller”
By default and in Service mode all buttons and switches are enabled.