Professional Documents
Culture Documents
1
Feedback Filter X-Feed
The feedback signal is processed by a 6db/oct tilt style filter at In cross-feed mode the output of the left delay line is fed back
1kHz which can be found in the tone control of older car radi- into the input of the right delay line and vice versa. This allows
os for example. The filter is flat at the 12 o'clock position (0). In for interesting stereo slap-back effects. This function is only
the LP position it acts as a low pass HP corresponds to a high available in stereo instances of the plugin.
pass.
LFO / LFO Trim
Wet Mix / Dry Mute
Depressing the LFO button enables a 1.5Hz 10% sine modulat-
Turning the wet mix knob clockwise increases the amount of ion of the delay times. In sync mode, the LFO period is set to
processed signal that is added to the dry signal which allows the ½ note pulse. Use the LFO Trim knob to in- or decrease the
you to control the intensity of the overall effect. Click the dry amount of modulation by +/- 90%.
mute LED to mute the dry signal (send applications).
Power
Level
The power button lets you bypass the processing altogether.
The level knob lets you compensate for any loudness increase
caused by the added effect signal (-20 through 0dB). Noise
The BBD system generates a considerable noise floor that
Link
even though it's suppressed by the SA571 compandor system
Depressing the link button makes the Delay L and R knobs re- contributes subtly to the character of the processed signal.
act in linked fashion so that the delay times for both channels Use the noise button to turn the emulated BBD noise floor on
becomes identical (only available in stereo instances). or off.
2
SYSTEM BLOCK DIAGRAM
3
KEYBOARD SHORTCUTS PLUGIN ACTIVATION
VST hosts You can test our plugins for 14 days without any restrictions.
Simply click the "Activate Trial" button in the plugin GUI after
Ctrl/CMD+Click: Reset to default
the installation to start your trial period.
Alt+Drag: Switch to circular knob mode
Shift+Drag/Mouse wheel: Fine control
To activate your full license you can purchase a product activa-
tion key on our website. The activation key will be sent to you
AU / AAX hosts
by email once the payment process has been completed, suc-
Alt+Click: Reset to default cessfully. Click "Activate plugin..." in the plugin GUI or the drop
Shift+Drag/Mouse wheel: Fine control down menu below, enter your email and product activation
key and hit the "Activate" button to proceed.
All hosts
Double Click: Reset to default / jump to value
FAQS AND TECHNICAL SUPPORT
SYSTEM REQUIREMENTS
An overview of Frequently Asked Questions can be found on
• Intel compatible or Apple Silicon CPU our website under the following link
• 2GB RAM
• Mac OS 10.9 or newer (Mac users) https://fuseaudiolabs.com/faq.html
• Windows 7 or newer (PC users)
• A display resolution of 1280x1024 pixels or more Our tech support can be reached via the following link
• A VST2, VST3, AAX or AU compatible 64-bit host (Mac
users) https://fuseaudiolabs.com/support.html
• A VST2, VST3 or AAX compatible 32-bit or 64-bit host (PC
users)