Professional Documents
Culture Documents
Installing Solaris Ultra
Installing Solaris Ultra
A. FAND 01/12/07
Danbury, Ct. 06810
REV DRAFTED BY DATE
A. OLIVEIRA 01/12/07
PROPRIETARY INFORMATION: TITLE DOCUMENT NUMBER REV
The content of this document is the exclusive
property of Lorad and may not, without prior written INSTALLING SOLARIS MEDIA ON
permission of Lorad, be reproduced, copied or used
ULTRA 45
AP-00315 002
for any purpose whatsoever.
PURPOSE
This Work Instruction assures proper installation of Solaris 10 software into Modified Ultra 45 Computer
system.
SCOPE
This Work Instruction will be applied in manufacturing by a trained technician.
REFERENCE
• (CMP-00308) Modified Ultra 45 Computer
CONVENTIONS
Format Bold italic Bold Bold Bold italic
underline underline
Usage CD Title Window Inputs including data entry, Labels including selection
Title button name, and key stroke label and entry field label
INSTRUCTIONS
Note: Ensure the Modified Ultra 45 Computer is not installed in the Acquisition Station when
installing software.
Note: There is a screen saver that will blank the screen if the mouse or keyboard are not used for
10 minutes. Wiggle the mouse or press a keyboard key to redisplay the screen.
Note: On occasion a Solaris system message will display on the screen and push the installer
application window up on the screen. When this happens the active buttons (i.e. Continue
ect.) are still located in their original position. Scrolling over the area with the mouse will
cause the buttons to redisplay so they can be pressed.
Form ENG-0034-T36, Rev. 001
The content of this document is the exclusive DOCUMENT NUMBER REV.
property of Lorad and may not, without prior
written permission of Lorad, be reproduced, AP-00315 002
copied or used for any purpose whatsoever.
SIZE A SHEET 2 OF 6
Setup
1. Get “Solaris 10 Media” disk package
2. Make all cable connections to the Ultra 45 including the network connection to bge0.
6. When the screen displays “OK”, type Boot cdrom and then press Return. (about 5 minutes).
7. Select a Language - Type 0 (English) and Press Return. (Ensure that the mouse cursor is over
the displayed window before typing.)
10. Configure Multiple Network Interfaces – Select bge0 then Select Next.
a. Host Name for bge0 - Type in selenia (lower case) then Select Next.
e. Set the Default Route for bge0 – Select None then Select Next.
15. Continent and Country - Under Americas, Under United States, Select Eastern Time then
Select Next.
16. Date and Time - Verify Date and Time and change as necessary then Select Next.
17. Root Password – Type linx in both boxes and Select Next. (Note: You will only see *’s as you
type.)
18. Confirm Information - Confirm settings match those entered above then Select Confirm.
25. Select Upgrade of Initial install - Select Initial Install then Select Next.
26. Select Type of Install – Select Custom Install then Select Next.
30. Select System Locale – Select English (United States,ISO8859-1)(en_US.ISO8859-1) then Select
Next.
31. Select Products – Leave both boxes unchecked and Select Next.
34. Select Solaris Software Group – Select Entire Group Default Packages then Select Next.
35. Disk Selection - Disk C1t0d0(bootdisk) appears in the Selected Disks column.
0 / 7168
1 swap 12288
3 /opt 16384
4 /linx_mp 40469
5 /images 161750
b. Select Next.
42. Pausing – Select Continue. (Note: After 90 seconds Continue will be selected automatically.)
43. Pausing – Select Continue to reboot. (Note: After 90 seconds Continue will be selected
automatically and the system will reboot on its own.) (about 3 minutes once reboot starts)
44. Type no when asked if the system’s default NFS version 4 domain name needs to be overridden.
Then press Return.
46. Insert Disc - Remove Disc 1 and insert Disc 2 then Select OK.
49. Pausing – Select Continue. (Note: After 30 seconds Continue will be selected automatically.)
51. Insert Disc – Remove Disk 2 and insert Disk 3. Then Select OK. (about 3 minutes)
54. Pausing – Select Continue. (Note: After 30 seconds Continue will be selected automatically.)
59. Pausing – Select Continue. (Note: After 30 seconds Continue will be selected automatically.)
61. Insert Disc – Remove Disc 4 and Insert Disc 5. Then Select OK. (about 4 minutes)
64. Pausing – Select Continue. (Note: After 30 seconds Continue will be selected automatically.)
65. Pausing – Select Continue. The system will now reboot. (Note: After 90 seconds Continue will
select automatically.)
2. Open a terminal Window - Right Click on Desktop, Select Tools, Select Terminal.
3. Select Files.
7. Scroll down until you see the hosts file. Double Click on the hosts file.
The content of this document is the exclusive DOCUMENT NUMBER REV.
property of Lorad and may not, without prior
written permission of Lorad, be reproduced, AP-00315 002
copied or used for any purpose whatsoever.
SIZE A SHEET 6 OF 6
8. In the Text Editor, left Click below the last entry in the edit window.
Type 192.168.1.2
Press the Tab key.
Type brick
Press Return.
Type 192.168.1.1
Press the Tab key.
Type array
Press Return.
9. Select the File Tab on edit window and Select Save (needed) From the drop down menu.
2. In the Text Editor, left Click below the last entry in the edit window.
Type 192.168.1.0
Press the Tab key.
Type 255.255.255.0
Press Return.
3. Select the File Tab on edit window and Select Save (needed) from the drop down menu.