Professional Documents
Culture Documents
CERTIFICATE
CERTIFICATE No.: SMT-23-01-09-9 Date: 9-Jan-23
Inspection Certificate acc to EN10204 3.1
Basic Information
Customer: PARKER HANNIFIN CORP PAN AM DI
Technical requirement ASTM A269/A213 UNS S31600/31603, NACE MR0175 and NACE MR196 specifications.
Page 1/3
Test Results
STEEL QTY. WEIGHT
HCT Melt No. SPECIFICATION TEMPER STANDARD
GRADE (METERS) (KG)
OD 1/2X.065-316L-
HXB22-11-25-11 316/316L YX2206-2031 900 / Bright Annealed ASTM A269/A213
CD
Chemical
C Si Mn P S Ni Cr Mo -
Composition
MICHANICAL PROPERTIES
Dimensions
Eddy Current
YIELD TENSILE 100% and Surface
ELONGATION, Test
STRENGTH STRENGTH, HARDNESS Flattening Test Flare Test Pneumatic Quality
Standard δ%, 50mm
0.2, MPa σb, MPa Test
≧205 ≧515 ≥35 ≤90HRB Pass / Fail Pass / Fail Pass / Fail Pass / Fail Pass / Fail
Sample #1 295/300 630/635 55/56 76/77 PASS PASS PASS PASS PASS
Sample #2 / / / / / / / / /
Page 2/3
PARKER INSTRUMENTATION PRODUCTS DIVISION CHINA
No.18 Huashan Road , Xinbei District
Changzhou,Jiangsu,China
Parker Hannifin Corporation hereby certifies that all material used in our products conform to the material and/or manufacturing specifications as called for on the
said purchase order and catalog(s). All tubes are tested according to ASTM A213/A269 prior to shipment.
NACE MR0175/IS0 15156 superseded NACE MR0175 in December 2003. This standard incorporates requirements and recommendations for the selection and
qualification of materials for service in equipment, used in oil and natural gas production and natural gas treatment plants in H2S-containing environments, whose
failure could pose a risk to the health and safety of the public or to the environment. The standard specifically warns it is the equipment user’s responsibility to
select and to specify materials of construction resistant to cracking in defined H2S-containing environments.
When requested to do so, Parker Hannifin will supply products having materials of construction requested by the user that are compatible with the
recommendations of NACE MR0175/ISO 15156. Certification of the materials, sufficient to demonstrate metallurgical compliance of those materials to the
recommendations of NACE MR0175/ISO 15156.
It will be the responsibility of the user to select products and materials of construction appropriate for their H2S-containing environments. Parker can not and must
not offer advice as to the suitability of materials for these environments. We can, however, continue to supply products with material metallurgical conditions
meeting the NACE MR0175/ISO 15156 requirements.
Quality Assurance