You are on page 1of 3

KSK AND PARTNERS SDN. BHD.

Item Description Unit Qty Rate (RM) Amount (RM)

ELEMENT NO.8 : FLOOR FINISHES

EXTERNAL FLOOR FINISHES

Cement and sand (1:3) screed with floor hardener (FH); finished with a
steel trowelled as described to

A To floor m2 120 -

INTERNAL FLOOR FINISHES

Cement and sand (1:3) screed with floor hardener (FH); finished with a
steel trowelled as described to

B To floor m2 163 -

Cement and sand (1:3) screed with floor hardener with heavy duty
exposy coating (EP); finished with a steel trowelled as described to

C To floor m2 80 -

Cement and sand (1: 3) backing screed to receive floor tiles (measured
separately) :-

D To floor m2 336 -

Cement and sand (1:3) screed paving trowelled smooth:-

E To receive vinyl sheet m2 2,917 -

F To vinyl skirting; 150mm high m 2,000 -

Approved 600mm x 600mm glazed finish homogenous porcelain tiles


(HT7) or approved equivalent; bedded in cement and sand 1:3
(measured separately); jointing in neat matching coloured cement; in
approved colour, thickness and pattern :-

G To floor m2 89 -

Approved 300mm x 300mm non-slip homogenous porcelain tiles (HT6)


or approved equivalent; bedded in cement and sand 1:3 (measured
separately); jointing in neat matching coloured cement; in approved
colour, thickness and pattern :-

H To floor m2 247 -

To collection RM -

BILL NO 4.1. : EMERGENCY DEPARTMENT


8/1
HOSPITAL CANSELOR TUANKU MUHRIZ, PPUKM (REKA DAN BINA)
KSK AND PARTNERS SDN. BHD.

Item Description Unit Qty Rate (RM) Amount (RM)

ELEMENT NO.8 : FLOOR FINISHES (Cont'd)

INTERNAL FLOOR FINISHES (Cont'd)

Supply and lay moisture barrier, a two component , high performance


water-based epoxy moisture barrier coating, to withstand hydrostatic
pressure up to 25 metre head of water, to apply 1 coat at 5m2/litre with
75% RH . 92% and 2 coat at 5m2/litre with RH. 92% all in accordance
to manufacturer's instruction to :-

A To receive vinyl sheet m2 2,917 -

Supply and lay self-levelling underlayment screed including primer all


in accordance to manufacturer's instruction to :-

B To receive vinyl sheet m2 2,917 -

Supply and lay approved vinyl floor or other equivalent laid to floor
with acrylic adhesive as described inclusive of heat welding rod all
seams and joint in welding rod of matching / constrast in colour and
described:-

C To floor; heavy duty vinyl sheet (V1) m2 2,889 -

D 150mm high skirting to wall complete with cove and capping strip m 1,966 -

E To floor; anti-slip vinyl sheet (V3) m2 15 -

F 150mm high skirting to wall complete with cove and capping strip m 18 -

G To floor; chemical resistant vinyl sheet (V5) m2 13 -

H 150mm high skirting to wall complete with cove and capping strip m 16 -

Prepare and apply vapour sealer followed by 50mm thick mineral foam
of 2.0Ibs/ft2 density P.U Foam to slab

J To floor m2 4,907 -

To collection RM -

BILL NO 4.1. : EMERGENCY DEPARTMENT


8/2
HOSPITAL CANSELOR TUANKU MUHRIZ, PPUKM (REKA DAN BINA)
KSK AND PARTNERS SDN. BHD.

Item Description Unit Qty Rate (RM) Amount (RM)

ELEMENT NO.8 : FLOOR FINISHES (Cont'd)

COLLECTION PAGE ;

From page 8/1 -

From page 8/2 -

TOTAL ELEMENT NO.8 : FLOOR FINISHES


RM -
(Carried to Summary)

BILL NO 4.1. : EMERGENCY DEPARTMENT


8/3
HOSPITAL CANSELOR TUANKU MUHRIZ, PPUKM (REKA DAN BINA)

You might also like