Professional Documents
Culture Documents
Certificat E6013 4 SAF 2024
Certificat E6013 4 SAF 2024
* Chemical composition samples of the covered electrodes and flux cored wires are taken from weld metal. Chemical composition samples of the
solid wires are taken from raw material wire.
Mechanical Analysis of Weld Metal EN 10204 2.2
Tensile Test Impact Test
Cond. ** Tensile Yield Elongatio Cond. ** Notch Temp. Avr.
N/mm2 N/mm2 % ˚C Joule
540 450 25 ISO-V 0 60
** PWHT: Post-Weld Heat Treatment AW: As-Welded
Additional Information
1-The product which is mentioned above is produced and controlled according to ISO 9001 Quality Management System.
2-It should be noted that the results of chemical and mechanical tests could vary from those production joints because of different welding
parameters.
3-Mechanical and chemical test results are up to date.
* Chemical composition samples of the covered electrodes and flux cored wires are taken from weld metal. Chemical composition samples of the
solid wires are taken from raw material wire.
Mechanical Analysis of Weld Metal EN 10204 2.2
Tensile Test Impact Test
Cond. ** Tensile Yield Elongatio Cond. ** Notch Temp. Avr.
N/mm2 N/mm2 % ˚C Joule
585 480 26 ISO-V -50 120
** PWHT: Post-Weld Heat Treatment AW: As-Welded
Additional Information
1-The product which is mentioned above is produced and controlled according to ISO 9001 Quality Management System.
2-It should be noted that the results of chemical and mechanical tests could vary from those production joints because of different welding
parameters.
3-Mechanical and chemical test results are up to date.
* Chemical composition samples of the covered electrodes and flux cored wires are taken from weld metal. Chemical composition samples of the
solid wires are taken from raw material wire.
Mechanical Analysis of Weld Metal EN 10204 2.2
Tensile Test Impact Test
Cond. ** Tensile Yield Elongatio Cond. ** Notch Temp. Avr.
N/mm2 N/mm2 % ˚C Joule
560 480 27 ISO-V -40 85
** PWHT: Post-Weld Heat Treatment AW: As-Welded
Additional Information
Shielding Gas : M21
1-The product which is mentioned above is produced and controlled according to ISO 9001 Quality Management System.
2-It should be noted that the results of chemical and mechanical tests could vary from those production joints because of different welding
parameters.
3-Mechanical and chemical test results are up to date.
* Chemical composition samples of the covered electrodes and flux cored wires are taken from weld metal. Chemical composition samples of the
solid wires are taken from raw material wire.
Mechanical Analysis of Weld Metal EN 10204 2.2
Tensile Test Impact Test
Cond. ** Tensile Yield Elongatio Cond. ** Notch Temp. Avr.
N/mm2 N/mm2 % ˚C Joule
540 450 25 ISO-V 0 60
** PWHT: Post-Weld Heat Treatment AW: As-Welded
Additional Information
1-The product which is mentioned above is produced and controlled according to ISO 9001 Quality Management System.
2-It should be noted that the results of chemical and mechanical tests could vary from those production joints because of different welding
parameters.
3-Mechanical and chemical test results are up to date.