Professional Documents
Culture Documents
BEFORE INSTALLING ANYTHING WE STRONGLY RECOMMEND THAT YOU VERIFY THAT ALL CONTENTS
RECEIVEDARE COMPLETE ACCORDING TO THE PACKAGE CONTENTS LISTED IN THIS QUICK START GUIDE. WE
CHECK EVERYTHING TO MAKE SURE IT IS WORKING WHEN IT LEAVES US. BUT OCCASIONALLY THINGS FAIL AND IT
IS BETTER TO KNOW NOW THAN AFTER YOU HAVE FITTED EVERYTHING! PLEASE READ ALL THE CONTENTS
BELOW CAREFULLY BEFORE YOU INSTALL THIS PRODUCT.
IN THE BOX
*For customers who have purchased a 2-pack of this product, each component below will be doubled (except the
USB cable, power adapter and the quick start guide).
PRODUCT OVERVIEW
1. Mark the positions of the screw holes on the mounting surface, then use a 1/4 inch drill bit to drill holes and
place the round adapter plate on the surface with anchors and screws (included) as needed.
3. Press the camera mount holder onto the adapter plate, then rotate the nut clockwise to the mount holder.
4. Vertically place the camera on the camera mount holder, adjust the angle of the cameras until the desired
view is set. Rotate the nut to secure the camera.
*Note: to install the camera on smooth surfaces, use the sticky adhesive pad (included) to stick the round
adapter plate on the surface, then follow the other 3 steps above.
CHARGING
support@virtavo.com
@HomeVIRTAVO
@HomeVIRTAVO