Professional Documents
Culture Documents
User Guide
First Edition
November 2020
No part of this manual, including the products and software described in it, may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means, except documentation kept by the purchaser for backup purposes, without the express written
permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless
such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM
ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identification or explanation and to the
owners’ benefit, without intent to infringe.
ii
Contents
Contents....................................................................................................... iii
Notices.......................................................................................................... iv
Safety information....................................................................................... vi
Care & Cleaning.......................................................................................... vii
Takeback Services..................................................................................... viii
Product information for EU energy label................................................. viii
Chapter 1: Product introduction
1.1 Welcome! ..................................................................................... 1-1
1.2 Package contents.......................................................................... 1-1
1.3 Monitor introduction..................................................................... 1-2
1.3.1 Front/Side view................................................................ 1-2
Chapter 2: Setup
2.1 Monitor standing positions.......................................................... 2-1
2.2 Adjusting the monitor................................................................... 2-2
2.3 Connect the USB monitor with system....................................... 2-3
2.4 Turning on the monitor................................................................. 2-3
2.5 Announcements............................................................................ 2-4
Chapter 3: General instructions
3.1 OSD (On-Screen Display) menu ................................................. 3-1
3.1.1 How to reconfigure........................................................... 3-1
3.1.2 OSD function introduction................................................ 3-2
3.2 Specifications summary............................................................... 3-8
3.3 Outline dimensions....................................................................... 3-9
3.4 Troubleshooting (FAQ)............................................................... 3-10
3.5 Supported operating modes...................................................... 3-12
iii
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
The use of shielded cables for connection of the monitor to the graphics card is
required to assure compliance with FCC regulations. Changes or modifications
to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
iv
NOTE: Energy Star is NOT supported on FreeDOS and Linux-based operating
system.
v
Safety information
• Before setting up the monitor, carefully read all the documentation that came
with the package.
• To prevent fire or shock hazard, never expose the monitor to rain or moisture.
• Never try to open the monitor cabinet. The dangerous high voltages inside the
monitor may result in serious physical injury.
• If the power supply is broken, do not try to fix it by yourself. Contact a qualified
service technician or your retailer.
• Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
• Slots and openings on the back or top of the cabinet are provided for
ventilation. Do not block these slots. Never place this product near or over a
radiator or heat source unless proper ventilation is provided.
• The monitor should be operated only from the type of power source indicated
on the label. If you are not sure of the type of power supply to your home,
consult your dealer or local power company.
• Use the appropriate power plug which complies with your local power standard.
• Do not overload power strips and extention cords. Overloading can result in fire
or electric shock.
• Avoid dust, humidity, and temperature extremes. Do not place the monitor in
any area where it may become wet. Place the monitor on a stable surface.
• Unplug the unit during a lightning storm or if it will not be used for a long period
of time. This will protect the monitor from damage due to power surges.
• Never push objects or spill liquid of any kind into the slots on the monitor
cabinet.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked between
100-240V AC.
• If you encounter technical problems with the monitor, contact a qualified
service technician or your retailer.
• Adjustment of the volume control as well as the equalizer to other settings
than the center position may increase the ear-/headphones output voltage and
therefore the sound pressure level.
This symbol of the crossed out wheeled bin indicates that the product (electrical,
electronic equipment, and mercury-containing button cell battery) should not
be placed in municipal waste. Please check local regulations for disposal of
electronic products.
vi
Care & Cleaning
• Before you lift or reposition your monitor, it is better to disconnect the cables
and power cord. Follow the correct lifting techniques when positioning the
monitor. When lifting or carrying the monitor, grasp the edges of the monitor.
Do not lift the display by the stand or the cord.
• Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor
surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed
with a cloth dampened with mild cleaner.
• Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended
for use with the monitor. Never spray cleaner directly on the screen, as it may
drip inside the monitor and cause an electric shock.
vii
Where to find more information
Refer to the following sources for additional information and for product and
software updates.
1. ASUS websites
The ASUS websites worldwide provide updated information on ASUS
hardware and software products. Refer to http://www.asus.com
2. Optional documentation
Your product package may include optional documentation that may have
been added by your dealer. These documents are not part of the standard
package.
Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment. We believe in providing solutions for
our customers to be able to responsibly recycle our products, batteries and other
components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detail recycling
information in different region.
viii
1.1 Welcome!
Thank you for purchasing the ASUS® Portable USB Monitor!
The latest ASUS Portable USB Monitor provides great portability and simplicity to
your daily life, enhancing both of your viewing experience and style.
Menu
3 2 1
A B
+70°
Type-C
or
B
Driver
1
Type-A
In case the computer does not support Type-C interface but only USB3.0 interface,
please install the official driver from ASUS website firstly.
Check ASUS website for latest driver and DisplayWidget software.
Please ensure not to stack the product with the computer when computer is in use
(power on or standby mode) otherwise the hard drive could possibly be influenced
by the result of permanent data missing or the computer display could be switched
off due to computer auto protection mechanism. When placing this product
together with the computer in a bag, you must have the computer power off to
avoid possible hard drive damage.
S t a n d a r d Mo d e
s R GB Mo d e
S c e n e r y Mo d e
T h e a t e r Mo d e
G a me Mo d e
N i g h t V i e w Mo d e
R e a d i n g Mo d e
D a r k r o o m Mo d e
S t a n d a r d Mo d e
s R GB Mo d e
S c e n e r y Mo d e
T h e a t e r Mo d e
G a me Mo d e
N i g h t V i e w Mo d e
R e a d i n g Mo d e
D a r k r o o m Mo d e
• Standard Mode: Best choice for document editing with Splendid Video
Enhancement.
• sRGB Mode: best choice for viewing photos and graphics from PCs.
• Scenery Mode: Best choice for scenery photo display with Splendid
Video Enhancement.
• Theater Mode: Best choice for movies with Splendid Video
Enhancement.
• Game Mode: Best choice for game playing with Splendid Video
Enhancement.
• Night View Mode: Best choice for dark-scene games or movies with
Splendid Video Enhancement.
• Reading Mode: This is the best choice for book reading.
• Darkroom Mode: This is the best choice for a weak ambient light
environment.
Level 0
Level 1
Level 2
Level 3
Level 4
• Level 0: No change.
• Level 1~4: The higher the level, the less blue light is scattered.
When Blue Light Filter is activated,the default settings of Standard Mode
will be automatically imported. Between Level 1 to Level 3, the Brightness
function is user-configurable. Level 4 is optimized setting. It is compliance
with TUV Low Blue Light Certification. The Brightness function is not user-
configurable.
Please refer to the following to alleviate eye strains:
• Users should take some time away from the display if working for long
hours. It is advised to take short breaks (at least 5 mins) after around 1
hour of continuous working at the computer. Taking short and frequent
breaks is more effective than a single longer break.
• To minimize eye strain and dryness in your eyes, users should rest the eye
periodically by focusing on objects that are far away.
• Eye exercises can help to reduces eye strain. Repeat these exercises
often. If eye strain continues please consult a physician. Eye exercises: (1)
Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes
diagonal.
• High energy blue light may lead to eye strain and AMD (Age-Related
Macular Degeneration). Blue light Filter to reduce 70% (max.) harmful blue
light to avoiding CVS (Computer Vision Syndrome).
Brightness
Contrast
Saturation
C o l o r Te mp .
S k i n To n e
Sharpness
T r a c e Fr e e
Aspect Control
VividPixel
ASCR
S p l e n d i d D e mo Mo d e
Auto Rotation
G a me P l u s
QuickFit
E C O Mo d e
OSD Setup
Language
Mo r e
• Splendid Demo Mode: Splits the screen into two for Splendid modes
comparison. (Scenery mode only)
• Auto Rotation: To enable or disable automatic image rotation. Note
that this function is only working under Windows OS after installing the
DisplayWidget software.
• GamePlus: The GamePlus function provides a toolkit and creates a
better gaming environment for users when playing different types of
games. The crosshair overlay with different crosshair options lets you
choose the one that best suits the game you’re playing. There’s also an
onscreen timer you can position on the left of the display so you can keep
track of the elapsed gaming time. Display Alignment displays alignment
lines on 4 sides of the screen, serving as an easy and handy tool for you
to line up multiple monitors perfectly.
GamePlus Main Menu GamePlus — Crosshair
GamePlus
(Practice Mode)
Position
Alignment Grid 1
Alignment Grid 2
Shortcut
When a certain function is selected or activated, your shortcut key may not
support. Available function choices for shortcut: Blue Light Filter, Splendid,
Brightness, Contrast, Auto Rotation, Color Temp., QuickFit, GamePlus.
E
357.9 12.7
[14.09] [0.50]
6.2 345.6 6.2 10.5
[0.24] [13.61] [0.24] [0.41]
344.2
[13.55]
[0.24]
6.2
[8.85]
[7.68]
[7.62]
224.8
195.0
193.6
[0.34]
8.7
.00
70
[0.93]
23.6
29.1 29.1
[1.14] [1.14]
3.3
3.4 Troubleshooting (FAQ)
Problem Possible Solution
Power LED is not ON
• Press the button to check if the monitor
is in the ON mode.
• Check if the power cord is properly
connected to the monitor and the power
outlet.
• Check if the power switch is ON.
The power LED lights amber and there is • Check if the monitor and the computer are
no screen image in the ON mode.
• Make sure the signal cable is properly
connected the monitor and the computer.
• Inspect the signal cable and make sure
none of the pins are bent.
• Connect the computer with another
available monitor to check if the computer
is properly working.
Screen image is too light or dark • Adjust the Contrast and Brightness
settings via OSD.
Screen image bounces or a wave pattern is • Make sure the USB Type-C cable is
present in the image properly connected to the monitor and the
computer.
• Move electrical devices that may cause
electrical interference.
Screen image has color defects (white does • Inspect the USB Type-C cable and
not look white) make sure that none of the pins are
bent.
*1: White color background will consume higher power, so it’s better to use white color
background to test the power limit from source USB Type-C device.
*2: If the monitor does not re-start when adjusting to value 100, that means source USB Type-C
device has sufficient power supply.
* “P” / “N” stands for “Positive” / “Negative” polarity of incoming H-sync/V-sync (input timing).