You are on page 1of 2

ESML8P-PC2 Series

Managed Industrial Ethernet Switch with PoE


data delivered
8 Copper & 2 Combo Ports

Product Description
The KBC ESML8P-PC2 Ethernet series is a layer 2, 10 port,
managed industrial switch designed for use in a wide range of
operating temperatures in non–environmentally conditioned,
industrial applications. The switch provides connectivity for up to
eight 10/100Mbps twisted pair copper ports with Power over
Ethernet (PoE) and two 10/100/1000 combo ports which are
automatically configured and, with plug-and-play design, provide
ease and speed of installation. Ethernet Ring Redundancy is
offered that recovers cable or port failures automatically in less
than 20ms. Units can be fully managed through a number of
different interfaces and provide a vast range of hardware and
software features ensuring ease of installation and enhancement
of network performance.

The series is available in either DIN rail or wall-mount configurations.

Product Features
• PoE IEEE 802.3af
• Supports Ethernet Ring Redundancy – recovery time <20ms
• Redundant power input
• Alarm output for power supply
• Supports QoS, VLAN, STP & RSTP, IGMP snooping, SNMP V1/V2c/V3, port mirroring & port trunking
• IP Address Security Management (RADIUS)
• IP30 protection class

Typical System Configuration

IP cameras
up to 8

SFP ports can be configured for


either 100 or 1000Mbps fiber

IP Cameras (IEEE802.3af)

Specsheet-ESML8P-PC2_Series-low-Rev1212
Copyright© KBC Networks Ltd. 2012
Specifications
Standards Management
IEEE Standard IEEE 802.3 10BASE-T SNMP V1/V2c/V3 Web, Telnet, CLI, Menu driven management
IEEE 802.3u 100BASE-TX
IEEE 802.3ab 1000BaseT VLAN
IEEE 802.3x Full Duplex Port Based, IEEE 802.1Q Tag VLAN (256 Entries) VLAN ID (Up to 4k, 0 to 4096),
IEEE 802.3ad Port Trunking GVRP (256 groups)
with LACP
IEEE 802.1d Spanning Tree RFC Standard (SNMP MIB)
IEEE 802.1p Class of Service RFC2030 SNTP, RFC2821 SMPT, RFC1215 Trap, RFC2233 MIB II, RFC1157 SNMP MIB,
IEEE 802.1q VLAN Tagging RFC1493 Bridge MIB, RFC2674 VLAN MIB, RFC2665 Ethernet Like MIB,
IEEE 802.1x User RFC2819 RMON MIB, Private MIB
Authentication (RADIUS)
IEEE 802.1w Rapid Spanning SNMP Trap
Tree Up to 3 trap stations
Switch Performance
Switching Method Store & Forward Port Trunking with LACP
Transfer Rate 14,881pps LACP port trunking; 4 trunk groups /maximum 4 trunk members
148,810pps
1488100pps Class of Service (IEEE 802.1p)
Backplane Switch Capacity 5.6Gbps Provides 4 priority queues per port
Mac Address Table 8k
Quality of Service
Port, Tag, IPv4 Type of Service, IPv4/IPv6 Different Service
PoE
Standard IEEE 802.3af IGMP
Power supplied per port 15.4W@48Vdc IGMPv1, v2 & Query Mode. Up to 256 groups

Contact Closure Alarm Output Spanning Tree


Output SPST Relay, Normally Closed IEEE 802.1d Spanning Tree, IEEE 802.1w Rapid Spanning Tree
Switch Rating 25Vac/220Vdc max
2A max, 60W max SNTP
Power Supports Simple Network Time Protocol
Power Input 48Vdc
Dual redundant SMTP
Power Consumption 16.8W (no PoE) Supports Simple Mail Transfer Protocol (6 email accounts for alerts)
123W (full load PoE)
Power supply Supplied separately IP Security
Supports up to 10 IP addresses for secured access

Mechanical System Event Log


Casing IP30 Protection Supports system log record and remote system log server
Dimensions WxHxD 72mm x 152mm x 105mm
2.83” x 5.98” x 4.13” Port Mirroring
Weight 907g / 1lbs TX, RX or both packets
Installation(1) Wall-mount or DIN rail
Port Security
Approvals 100 MAC address entries for static MAC & 100 MAC filters
FCC Part 15, CISPR (EN55022) Class A
CE EN6100-4-2,3,4,5,6,8,11 Log In Security
UL, cUL IEEE 802.1x Authentication/RADIUS
CE EN60950-1
IEC60068-2-27 (Shock), IEC60068-2-32 (Free Fall) DHCP
IEC60068-2-6 (Vibration) DHCP Client, DHCP Server & IP relay functions

Environmental Bandwidth Control


Operating Temperature -40°~+74°C / -40°~+165°F Supports ingress and egress packet limit
Storage Temperature -40°~+74°C / -40°~+165°F
Operating Humidity 5 to 95% non-condensing Firmware Update
Supports TFTP firmware update, config. backup and restore

Part Number Configurator

ESML8P-PC2-D

1. Unit is supplied with both DIN rail and wall-mount fittings.

Due to ongoing technological improvements, product specifications are subject to change without notice. KBC is not liable for any errors, omissions or changes of any description of the goods contained herein. This information
is for the sole purpose of identifying the products, and KBC makes no warranty that the products conform to any description contained herein. Do not rely solely on any representations, statements, or assertions concerning
these Products contained herein.

www.kbcnetworks.com

You might also like