Professional Documents
Culture Documents
TRANSMISION CONVERTER
USB/RS485
VERSION 1.0
Installation & operation manual
1. GENERAL INFORMATION
Equipped with a converter CD include software that installs the files neces-
sary for the proper control of the converter.
The device firmware is designed to work with Windows 2000/XP platforms,
Server 2003/2008, Windows 7 / Vista.
After installation, a message appears informed that the device is ready to work.
After connect and install the converter, a virtual COM port will be create. So you
should open the Device Manager and check which port number is assigned. This
will need to choose in the network configuration.
If the assigned COM port number will be extended beyond the range available in
the KaDe software is you can change it to another in the Advanced port proper-
ties menu.