Professional Documents
Culture Documents
BIOCIDE ITA is a broad spectrum, non-foaming, readily biodegradable micro-biocide for use in
industrial cooling water systems. It is based on a formulation of Isothiazoline derivatives and is
completely soluble in water. At relatively low concentrations it is effective against a range of micro-
organisms including many gram positive and gram negative bacteria, fungi and algae.
BIOCIDE ITA should be dosed periodically at a rate of 100-200ppm of the total system volume. In
a badly fouled system an initial shock dose of up to 500ppm may be required. BIOCIDE ITA is
effective over a wide range of pH and can be used in isolation or alternately with other non-oxidising
or oxidising biocides.
Specification
Safety
See overleaf
Packing
Over ....
Feedwater Limited
Tarran Way, Moreton, Wirral, CH46 4TU, UK
Tel: +44 (0)151 606 0808 Email: enquiries@feedwater.co.uk
Fax: +44 (0)151 678 5459 Web: www.feedwater.co.uk
Safety and Handling Precautions
Product Name BIOCIDE ITA CORROSIVE IRRITANT
Health Hazards
First Aid
Skin Exposure: Drench affected area with water and remove contaminated clothing.
Wash with soap and water.
If irritation develops seek medical advice.
Eye Exposure: Flush with clean flowing water for 15 minutes. Seek medical advice.
Ingestion: Wash out mouth with water and give plenty of water to drink. DO NOT induce
vomiting. Obtain medical attention.
Inhalation: Move subject to fresh air. Give artificial respiration if breathing has stopped.
Seek medical advice.
Storage
Keep out of reach of children.
Keep container tightly closed and in a cool, well ventilated place.
Handling
Avoid contact with skin and eyes.
Wear suitable protective clothing, gloves and eye protection.
Spillage
Absorb with liquid binding material eg sand, sawdust, acid binders. Dispose of contaminated material as waste.
Disposal
Washout empty container thoroughly with water before disposal.