Professional Documents
Culture Documents
Samsung Galaxy A72 SM-A725F SM-A725M Manual de Servicio
Samsung Galaxy A72 SM-A725F SM-A725M Manual de Servicio
Common
MAIN2 ANT
MB/HB PRX_TR_IN_B7 EBI0_CA(0:5)
PRX_MHUHB1
EBI0_DQ(0:15)
EBI0_CLK/CKE/CS/DMI/DQS
EBI1_CA(0:5)
TX_PA_OUT_B7 TX_TR_OUT_B7_38_40_41_CH0
TX_CH0_HB1
Memory
HB FEMid EBI1_DQ(0:15)
SFMD3L0F001 EBI1_CLK/CKE/CS/DMI/DQS
LPDDR4 6/8GB
PRX_ANT_HB
TRX_B40 HB PAM DDR_RESET_N uMCP 128GB/256GB
Coupler Diplexer WIPS33232-01
UFS TX/RX
COUPLER-10L-ALL-065T- DPX252690DT-5075C1K
1WAY-HIGH-MICROSTRIP LNA PRX_MHUHB2
TRX_B38_41 PRX_TR_IN_B38_40_41 UFS REFCLK
PRX_ANT_MB MXD8921HS
UFS_RST_N
TX_PA_OUT_B1
VBUS_IF
OVP VBUS_OVP
TX_PA_OUT_B2 ET9953M
TX_PA_OUT_B3 TX_CH0_MB2
TX_TR_OUT_B1_2_3_4_66
TX_PA_OUT_B8 SBU1/2 IF CON
TX_PA_OUT_B12_17 MUIC_D_P/N
TX_CH0_MB1
TX_PA_OUT_B20 CC1/2
CPL_MHB
TX_PA_OUT_B5_26 IF_PMIC_SDA/SCL
TX_PA_OUT_B4_66
LMB TX_TR_OUT_GSMHB TX_CH0_LB2 CC_SDA/SCL
Direct Charger
MAIN1 ANT IFPMIC
TX_PA_OUT_GSMHB MMMB PA IF_PMIC_INTB IF_PMIC_SDA/SCL SM5440
LB TX_PA_OUT_GSMLB
QM58110 TYPE_C_INT
TX_TR_OUT_GSMLB TX_CH0_LB1 SM5714
TX_PA_OUT_B13 USB_AP_D_P/N
B13 DPX VBATGND_DC_SENSE
TRX_B13 VBAT_SENSE
B8682 AP_UART_RXD/TXD
LB13 : A725M Only VBATTERY_CON
TX_PA_OUT_B28
CAM_FLASH_EN CSP Battery
TX_TR_B5_8_12_13_17_20_28 CAM_TORCH_EN
B28 DPX
TRX_B28
ANTMB B1250 VBATGND_SENSE
QLINK_RX3_N
PRX_TR_IN_G850_B5 PRX_LMB1 SUB_REV
PRX_TR_IN_EGSM_B8 PRX_LMB3
GRIP_I2C_SDA/SCL GRIP SENSOR
PRX_TR_IN_B20 LOWER
GRIP_INT2 PMIC(SUB) VOL_UP
PRX_LMB2 QLINK_CLK_P PM6150A Vol UP
PRX_TR_IN_G1800_B3 PRX_MHB4 QLINK_CLK_N
CAM_FLASH_EN
TSP_SDA/SCL VDD_LCD_ELAVDD_7P6
VDD_LCD_ELVDD_4P6
OCTA_MIPI_D(0:3)_P/N Display VDD_LCD_ELVSS_-4P4
Display
OCTA_MIPI_CLK_P/N EL_ON2 PMIC
SUB ANT1 OCTA_RST_N EL_ON1 SM3010
LB
EL_ON1_DET
6AXIS_INT1
TR_FBRX FBRX_IN_P
6AXIS_INT2 6 Axis Sensor CAM_SPI_CS/SCK/MOSI/MISO
6AXIS_I3C_SCL/SDA LSM6DSOTR
LB DRX LFEM
DRX_TR_IN_B5_8_20_28_GSMLB DRX_LMB1
SM7125
DRX_ANT_LB DRX_TR_IN_B12_13_17 DRX_LMHB1
SFML5E0K001 AP_MCU_SDA/SCL
CAM MCU CAM_OIS_SDA/SCL
STM32G051
CAM_AF_EEP_I2C_SDA/SCL
RCAM1_SENSOR_I2C_SDA/SCL RCAM1
MIPI_RCAM1_C-PHY_3LANE 64M OIS
RCAM1_MCLK / RCAM_FSYNC / RCAM1_RST_N
DRX_TR_IN_B7_38_40_41 DRX_MHUHB1
RCAM2_SENSOR_I2C_SDA/SCL RCAM2
MIPI_RCAM2_DATA/CLK 8M
DRX_TR_IN_B1_4_32_66 DRX_MHB1 RCAM2_MCLK / RCAM_FSYNC / RCAM2_RST_N 3x TELE
M/HB DRX DRX_TR_IN_B1_4_66CA_B2_3_GSMHB DRX_MHB3
LFEM CAM_AF_EEP_I2C_SDA/SCL
FCAM
FCAM_SENSOR_I2C_SDA/SCL
QDM3870 MIPI_FCAM_DATA/CLK 32M
SUB ANT2 FCAM_MCLK / FCAM_RST_N
SAW
SN5MP646YFPR MIPI_RCAM4_DATA/CLK
RCAM4 CAM_PMIC
DRX_B32
SAFFB1G47AA0F3K RCAM4_SENSOR_I2C_SDA/SCL 5M
RCAM4_MCLK / RCAM_FSYNC MACRO
LB32 : A725F Only
S2MPB03X01
LNA SAW RCAM2 LDO RCAM3 LDO RCAM3 LDO RCAM1 RCAM1 CAM MCU RCAM4 RCAM4
GPS Extractor GNSS_L1_LNA_IN
MXDLN16U SFHG89BF302
GNSS_RF_L1_IN GNSS_IN_L1 RCAM2_LDO_EN
QM28014 AVDD_2P8 DVDD_1P05 AVDD_2P8 AFVDD_2P8 AVDD_1P8 VDD_OIS_MCU_1P8 AVDD_2P8 DVDD_1P2
RCAM3_LDO_EN
WIFI_2.4G
RCAM1_LDO_EN
BT/BLE : 2402 ~ 2480MHz RCAM4_LDO_EN
WiFi 5G ANT WiFi 2.4GHz : 2412 ~ 2472MHz
BT_FM_SB_CLK/DATA
CAM_PMIC_I2C_SDA/SCL
BT_UART
MOT_EN MOTOR
WL_BT_COEX_CLK/DATA
RGB Sensor
WiFi 5GHz : 5180 ~ 5825MHz WL_RFI_5G_CH0 CP_WLAN_COEX_TXD/RXD PROXY_LIGHT_SDA/SCL
STK31610-230S
SAW SPDT
DEA165500BT- MXD8621E BT/WIFI/FM
2208A1K
WL_RFO_5G_CH0
WCN3988
WCSS_CH0_CMD_CLK/DATA
MAGNETIC_SDA/SCL
Magnetic Sensor
AK09918C
WL_SW_CTRL
BTP_RST_N Finger Print Sensor
BTP_SPI_CS/SCLK/MOSI/MISO ET713
WCN_RFCLK
FM ANT
WL_BB_IQ_TX
MAIN MIC P/N MAIN MIC
SWR_TX_CLK/DATA1/DATA2 SUB MIC P/N SUB MIC
Global RF Band Information FM_LNA
MXDLN10T
WL_BB_IQ_RX
SWR_RX_CLK/DATA1/DATA2
CODEC_IRQ_N
CODEC
WCD9380
EAR MIC P/N EAR MIC
EAR OUT L/R EAR_OUT
EAR_L_DET/EAR_OUT_FB
GSM : 850/ 900/ 1800/ 1900 NFC ANT
WCDMA : B1/ B2/ B4/ B5/ B8 SPK
SPK AMP I2C SDA/SCL SPK_OUT_P/N
SPK_I2S3_BCLK/DO/DI/WS SPK AMP SPK_SNS_P/N
LTE FDD : B1/ B2/ B3/ B4/ B5/ B7/ B8/ B12/ B13/ B17/ B20/ B26/ B28/ B32/ AMP_EN
SPK_AMP_INT
TAS2562HYFPR
B66 NFC_EN
NFC_SWP1
A725F REV0.1 SM-A725F/M
Common 2020.10.16
B32 : SAFFB1G47AA0F3K
RFFE1
SDR675 PRX_MHB1
PRX_TR_IN_B32
PRX_TR_IN_G1800_B3
Transceiver
PRX_MHB4
SFML5E0K001 RFFE3
QFM2801 RFFE2
PRX_TR_IN_G1900_B2
PRX_MHB5 Main FEMid
SUB ANT 1 DRx LB LFEM
PRX_TR_IN_EGSM_B8
LB DRX PRX_LMB3
GSMHB_Tx
TX_PA_OUT_B13
RFFE6 QM58110 B1_Tx
DRX_TR_IN_B5_8_20_28_GSMLB MMMB_PA TX_PA_OUT_B28
DRX_LMB1 MB
TX_TR_OUT_B5_8_12_13_17_20_28 TX_PA_OUT_B8
TX_CH0_LB2 B3_Tx
DRX_ANT_LB TX_PA_OUT_B12_17
TX_TR_OUT_B1_2_3_4_66 TX_PA_OUT_B20
TX_CH0_MB2 B2_Tx ANT MB
PRX_ANT_MB
QAT5515
ANT S/W
TX_PA_OUT_B1
B8_Tx
TR_FBRX
TX_PA_OUT_B3 LB
TX_PA_OUT_B4_66
B12_Tx
TX_PA_OUT_B2
TX_TR_OUT_GSMLB PRX_ANT_LB Receptacle
TX_CH0_LB1 ANT LB Coupler COAXIAL
TX_TR_OUT_GSMHB TX_PA_OUT_GSMLB
B20_Tx (HHM22137A3K)
20449-001E CABLE
TX_CH0_MB1
ANT_CON_DET_1
QDM3870 RFFE3 TX_PA_OUT_GSMHB
SUB ANT 2 DRx MHB LFEM
B26_Tx
MB/HB DRX
GPS L1 PRX_TR_IN_G850_B5
PRX_LMB1 GSMLB_Tx (SM7125 GPIO_72)
CPL_MHB
PRX_TR_IN_B20
PRX_LMB2 AUX_LB1
DRX_TR_IN_B7_38_40_41 50ΩTERM
DRX_MHUHB1 PRX_TR_IN_B12_17 AUX_LB2
PRX_LMHB2
QM28014 MXD8921HS
AUX_LB3
Extractor MXD8621E B1/4/66 LNA MXD8621E
PRX_B1_4_66_CA_SEL PRX_B1_4_66_SW_SEL
Diplexer
DRX_TR_IN_B1_4_66CA_B2_3_GSMHB PRX_B1_4_66_LNA_EN
(SDR_GRFC2) (SDR_GRFC0)
GNSS_L1_LNA_IN DRX_MHB3 (SDR_GRFC7)
Receptacle
Coupler COAXIAL
Embedded CABLE
B8682 20449-001E
20449-001E
ANT_CON_DET_2
PRX_TR_IN_B13 B13 DPX
RF Switch PRX_LMHB1 TRX_B13
TX_PA_OUT_B13 SFMD3L0F001-1 RFFE2
B1250 HB FEMid
PRX_TR_IN_B28 B28 DPX
TRX_B28
PRX_LMB4 (SM7125 GPIO_117)
TX_PA_OUT_B28
TRX_B40
TRX_B38_41 PRX_ANT_HB
QET4101 B32 : SAFFB1G47AA0F3K
APT Modulator WIPS33232-01 RFFE6
RFFE6 HB PA
B38/41 : SAFFB2G59AA1F3K
TX_CH0_HB1
TX_TR_OUT_B7_38_40_41_CH0 TX_PA_OUT_B7 MAIN1 ANT
LB
Receptacle
Coaxial Cable
20449-001E
GNSS_L1_LNA_IN PRX_TR_IN_B38_40_41
GNSS_IN_L1 PRX_MHUHB2
LNA PRX_B38_40_41_LNA_EN
(SDR_GRFC1)
PRX_TR_IN_B7
PRX_MHUHB1
LTE FDD : B1/ B2/ B3/ B4/ B5/ B7/ B8/ B12/ B13*/ B17/ B20/ B26 / B28 / B32* / B66
LTE TDD : B38/ B40/ B41 Ant Switch Receptacle
Coaxial Cable
QAT5515 RFFE4
20449-001E
RFFE4
GND1
ANT3002 ANT3000
BOTHHOLE4007
ANT1002
ANT6000
ID
VBUS
BOOT0
ANT6001
TP7018
C7053
R7017
R7013
R4033
R4032
HDC4000 C4001
C7031
C7040 L7015 CD7000
C7029
L1053 L1051 L1056 C1064 C1052 C1047 C1045 C1043
C7036
R4050
L1019
L1013
L1005 L1055 L1040 C1051 C1046 C1044 C1042
R7019
U7001
TP7002
C7056
L7012
C7037
C1053
L7010
R7011
C1056
C1062
R7006
U1004
C1054
JTAG4000
C1055
C9011 L9005
C1050 L1041 C1061 C1069 C1083
R4035
C1060
L1038 C1066 L1065 L1043 L1046
R4036 TP7012
TP7013
C9010
C9017 C1049 C1067 R7014 C6103 R7012
C1059 C1073 C1082
C9000
L7018
L7019
C7049
C7050
C7046
C7052
R7010
R7009
C6104
R4045 C7048 R4016 R4015
C7042
R4012 R4010
R4034
L9004
L9000
C9016 L9003 TP2000 TP_SLEEP_CLK
TP6005
C4004
C9013
BOTHHOLE4000
C9009
C9007
R4037
C9015
U9000
C9006
C9008
C9012
C9014
C9001
U7003
SUS1001
R4044
L6011
R4046
C9002
L9001
L9002
C7000
L7002
C9004 TP6003
TP7003
R4047
TP7000
C7015
C8020
TP6006 R8004
C9003
L6006
D6002
TP7004
U7000
C8012
R8000
C9005 C7014
R6016
C7005
C8016
R8003
TH4000
C6064 C8004 R4039
C7012
C7013 C7004
UCP4000
C8007
C8058
R8001
C7055
L7009
R6018
R6007
R4038
TP_EBI4000
R7018
U6001 R4025 C7022
C7023
C9040
R9003
R4027
R4043
R4019
R4020
JTAG4002
C6069 R4051 L7008 R4042
TP_SDM_RESOUT_N
TP5001
TP5003
TP5005
C6023 R6006
TP5000
TP5002
R4024
TP5008
TP5004
TP5006
TP5007
R4022 R4041
R4040
R4011
L6019
C5100
SC9000
BOTHHOLE4002
JTAG4001
C5079
C5080
C5117
SUS1002
C10139
C5118
C10143 C5077
C10141
TH6005
C5099
R4014
C8054
C8050
U8004
C5078
C5121
U8008
U8011
C8068
C8067
ANT1000
R4013
U8007
C8010
C5120
C8055
C8051
C8031
C5097
C8030
C8061 C8060
C5119 C8019
CON4001
C8011
TP8003
C8006
C8008
L8001
C5098 R8006
U10155 UME5000 R4028
C8026
C8027
R4026
C6003
R8010
U8006
R8009
U8003
TP8005
C10144 TP8004
C8017
C8033
C6017
C10140 C6001
C6002
C6012 SOC8002
Date :
C8018 R8012
R4007
R4009
Resin :
C8005
R8002
TP3013
C8056
C8057
U8010
ZD6001
C6005
R5000
C8029
Model :
U8001
C8013
C5095
R4031
R4030
C10145
C10146
U10189
R6031 C8000
C5102
C5127
C5130
C5101
U8002
Charge :
C8009
C5094
R5001
C9034
C6000
C8052
C6062
C5126
U8009
C8053
C8028
C6007 C6089
Contact :
C8023
Routing :
R8005
C8059
R8008
C8025
U10184
Revision :
C6004
U6000 U9003
BOTHHOLE4005
TH6000
SOC8003
C6010
R6012
C6016
U10186
L6000
C6009
R6002
U10185
C6008
GND
ZD6000
Manufacture Count :
BOTHHOLE4003
ANT6002
ANT6005
L6014 ZD6005
C6092
L6015
R6026
ZD6003
R6025
C6091
ANT6003
L6017
R6027
C6097
ZD6004
BOTHHOLE4004
ANT6006
ANT6004
Created date of PCB data : 2021/1/7 16:23:56
VX_SETUP(2020-11-25)_HHP
Model :
Revision :
Manufacture Count :
Charge :
Contact :
Date :
Routing :
Resin :
VX_SETUP(2020-11-25)_HHP
Created date of PCB data : 2021/1/7 16:23:56
SOC8000
L2050
L2053
L2010
U2000
L2006
L2004
C2000
L2001
C2036
C2130
C2045
C2136
C2109
L2005 C2043
C7043
R7003
C7006
C7007
C7003
L7003
L7001
C7030
C2039
C2001
C7038
L2003
C2034
L2007
C3035 L3011
R3000
C3022
C3020
C3021
C3019
C3018
C3029
C3028
U7005
L2000
F2000
C2021
C3033 C3034
L2056
TP_WCSS_DATA
TP_WCSS_CLK
C3023
C3066
L3024 C3016
R4003
L3009
C3061 C3017
R4001
TP3005
TP7020
L3020 C3067 TH3000
R4018
BOTHHOLE4006
C2046 C3003
TP3006
TP3000
C3015
C3030
L3019
C3032
L3001
L3018 C3063 L3003
C2044
U3000
TP3001
TP3002
C2112 U3008
L3000
C3065 C3001
GAS1000
C3014
TP3003
TP3004
C2113 L3002
C2119
C2118
C3002
C3005
C2047
C3025
C3027
C3013
TP3007
L2038
C2116
TP7021
C3031 C3024 C3026
U2009
TP3008
L3010 C3004
C2120
C2121
C2117
L2048
L2046
L2045
F2006
C8003
C8001
C8062
L2011
C8002
L2044 C2051
C7045
R4048
ZD1000
U2003
TP7019 TP7017 TP7015
R4049
L1020 C1010 C2115 C2114 C2111 C2110
C3071
U7004
C2053
C2052
C7044
C2050 C3070
ZD7001
C3069
C2095
C2096
C2090
L2026
ANT7001 C2128 C2125 C2123
R7005
C2079
C7020
L3004
L2049 C2124 C2122
C2074
C3068
L2013
L2009 L2008
C7019
TP7014 TP7016
C2075
R7004
C2108
L3025
L2012 F1008
C2073
C2076
ANT7000 PAM2000
ZD7000
C2033
C2032
L2002 U2005
C2067 C2063
C2066 L2025
L2015 C2065
L2020
SC9003
L3005
C2077
C2101 L2031
C3000
C2017
C2015
C2016
TP2001
C2003
C2018
C2102
C2091
L2035
L2029
C2087 C2089
C2002 C2004 C2106
L3006
C2020
C2019
U2007
C2135
C2006
C2011
C2134
L2037
C3064
F3003
C2105
C2129
L3021 C2014
C2007
C2008
C2012
U2001
L3023 L3022 C1012
C2042
R1005
C1011
C2107
C1029
C1028
C2040
C2005
C2010 C2009
SC9002
C2064
C2013
C2028
BOTHHOLE4001
C2024 C2027
C2025
C1000
C2022 C2030
C2023
C6107
C6083
C6084
C6087
C6085
C6088
L1009
C2031
C2029
R2000
C1006
C2026
L1008
L1011
L1014
L1027
R6021
R6019 L1004
C1038
L1006
C1105
C1102
L1064
L1062
C1001
SOC8004
R6028
L1030
C1007
C1005
C1014
C1015
L1021
L1022
L1083
C6102
C6108
C6076 L1007
C6073
U1008
C1106
L1082
U1002
U6003
C6098
R6029
RFS1001
F1001
C1103
C1104
TP6004
C6106 C6079
L1025
C6105
C6081
L1061
U1003
C1099
L1029
C6101
C1004
L1003
C8021 C8022
L6018
C8045
C8035
C8036
C1021
C6095
C1003
L1001
L1000
C6093
C6090
CON4000
C1025 C1036
L6016
L1079
L1080
C8040
C1019
R1000
C1101
C6096
C1002
C1035
C1031
C1034
C1032
C1024
L1002
L1024
L1028
C8043
C8038
C8048
C6099
U8005
R1006
C6094 C1030
L6007
C8034
C8041
C1008
C6074
C8047
C8046
C8044
R4017
C6086
L6013 R1001
C8037
C9039
C6022
U1000
C1009
L1010
C6082
C6057 C8039 C6075 C6080
C5076 R6013
C6029
L6010
C5123
L6009
C1016
C1013
L1016
C6024
C5059
C5074 C5122
C6026 L6008 C1017
RFS1000
C9036 C9037
L6005 L6012
C5057
C6038
SOC8001
COUP1000
C5073
L6004
TP8001
C5056
C6056 C6031
C5075
R1007
C1093
C1089
C1088
L1031
TP8000 C1041
C1026 C1033
C6054
C5070
C5069
L1023
C5105
C6030 C6027
C1085
C5106 C5051
R6005
R6030
C6014
C5008
C5026 C5001
C5068
C5009
C5137
C5167
U6002
C1022
C1027
C5156
C1090
C1091
C6055
R6008
C5012
C5116 C5103
TP_UB4000
C5053
R1003
R1002
C1098
C5148
C5046
C5125 C5093
C6021
C5037
C5045 C5054
C6013
F1006
C6006
TP_UB
C1096
L1058
L1057
R1004
C5041
C1023
R6004
C5145 C5029
C1097
C5150
C6011
C5155
C6035 C5143
C5062
C5146
C4003
C5089 C5033
C1020 L2051
C6058 C5007 C5005 TH2000
C5164
C5147
C5031
C5133
C5035
C5153
C4002
L6002
C6028
C6039
C5082
C5151
C5152
C5032 C5110
C5131
C7026
C5163
C5036
TP6000
C7017
L7006
TP7009
C7035
C5141 C5049
C5044 C5006 C5027
C7025
TP7008
C6065
C6067
C6046
C6047
C6034 C5025
C5024
C5085 C5138
TP7005
C5128
C6068
C6018
L6003
C5018
L7013
C6050
C6060
C5055
C5038
C5040
C7027
C7018
C6049
C5023
C7002
U7006 C7011
C6077
C6078
C5042
C7034
OSC6000 C6066
C7024
TP4000
C6059
C6037
C6052
U6007
C7032
TP7006
TP7007
C6045
C3037
C6025
R6001
C6033 C6061
R7002
U3004 C6032 C6051 R4052 R4029
C7016
C7001
C6043
R7000
C7009
L7000
C7010 R7007
L7005
R6010
L7004
C7008
C7054
C3052
U10188
C9024
R6000
C2127
C7021
R4005
R4004
R4008
R9000
ZD6002 F9000
C3042
U10187
C3054
D6000
R7008
L3015
USB_P
C3047
D6001
ANT3008
R3001
C3046
USB_N
C3049
C3006
R6017
R6015
C7041
C6040
SOC9000
C3050 C3053
R3003
C3056
C3057
ANT3009
C6042
R6003
R4000
R4002
R6009
SOC6000
L3016
C3051 C3059
U3007
C6041
L7016
L7017
C6020
C6019
R6014
C3048
C3058
R3002
U10179
C3043
C3060
C9021
C9027
C9026
C9020
ZD9000
R4021
C9018
R4023
R9001
C9019
C9025
C10147
R9002
TP3010 TP3009
R9004 R9005
U7002
TP3011 TP3014
ZD9001
TP7011
Model :
Revision :
Manufacture Count :
Charge :
Contact :
Date :
Routing :
Resin :
VX_SETUP(2020-11-25)_HHP
Created date of PCB data : 2020/12/18 10:41:14
SOC1002
RFS1001 CON1004
BH1002
TP1003
ANT1001
CON1002
ANT1002
SOC1001 C1003
C1004
RFS1002 L1010
C1024
C1002 L1000
L1012
ZD1003
C1022 C1043
ZD1009 C1023
ZD1002 SW1005
TP1002
C1045
C1029
L1025
L1014
SW1003
MIC1001
L1018
C1027
C1031 L1020
L1023 L1024
L1016
SW1002
L1019
C1019
SW1001
L1005
C1028
L1017
L1033
C1020 L1007 C1012
L1036
C1018 C1051 C1010
C1008
ANT1007
L1008
C1009
L1006 C1052
ANT1004 ANT1003 C1005
C1007 ANT1006
Model :
Revision :
Manufacture Count :
Charge :
Contact :
Date :
Routing :
Resin :
VX_SETUP(2020-11-25)_HHP
Created date of PCB data : 2020/12/18 10:41:14
R1013
ZD1012
C1041
C1039
C1044
C1038
R1005
C1042
L1026
C1033
U1003
L1011 C1034
R1006
L1029
C1037
L1009
U1002
L1021
TP_FLIPCOVER
L1001
C1021
TP1000
R1009
R1004
EAR1001 L1002
TH1001
ANT1011
ANT1005
ANT1008
TP1001
L1034
R1003
C1015
U1001
D1001
D1002
C1016
C1017
ANT1010
V1001
L1004
C1013 R1002
L1035
C1035
ANT1009
U1004
SW1004
C1030
L1022
8. Level 3 Repair
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-1. Power On
Yes
No
Charging the battery by TA.
No If its voltage level is extremely low
Check the Battery Voltage.
Is it more than 3.5V? (under 3.0V),
Change the battery.
Yes
No
No
Yes
No
Yes
No
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-2. Initial
Initial Failure
Yes
No
Abnormal
No
Abnormal Check the OSC6000
Re Check "Power on" (Crack, open etc.)
Trouble shooting process Check the U6002/U6003 (Crack etc)
Normal
Change UCP4000
Abnormal
Change PBA
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-3. No Service
No service
Yes
No
Yes
No
Check the Voltage No
C2002 : 1.0V, C2031 : 1.2V
Replace the U6002
C2018 : 1.8V C2014 : 1.8V
Yes
No
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Is SIM socket ok? Replace SIM socket
Yes
No Change to the new SIM card.
Check the SIM Voltage. No If it doesn`t still work SIM card after
= 1.8V or 3.0V changing
(C7052,C7046)? the SIM card, Check the U6003 (Crack
etc)
Yes
No
No
Check the SIM RST / IO / CLK.
(SIM1 : TP7012, R7014, TP7013) Check the UCP4000 (Crack etc)
(SIM2 : TP7020, R7012, TP7021)
Is signal ok?
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Is SIM socket ok? Replace SIM socket
Yes
No Change to the new T Flash card.
No If it doesn`t still work T Flash card after
Check the T-flash Voltage.
(C7048) = 2.95V? changing
the T FLASH, Check the U6003
(Crack etc)
Yes
No
No
Check the T-flash
CLK (L7019) Check the UCP4000 (Crack etc)
Is signal ok?
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Insert TA / USB
Yes
No
Charging Sequence Start
VBUS_OVP(C6064) = 5V or 9V Replace SUB PBA
Yes
No
Check the Replace U6001
VBUS_IF(C6069)=5V or 9V
Yes
No
Battery is Charging? Replace U6000
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-7. OTG
Yes
No
Check the Check U6000
VBUS_IF(C6069)=5V (crack, open, damaged, etc.)
Yes
No
Check the Check U6001
VBUS_OVP(C6064) = 5V
(crack, open, damaged, etc.)
Yes
No
Check OTG working ? Replace SUB PBA
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Check the voltage
C7043 =1.8V Replace U6003
Yes
No
No
Check R4015, R4016 Replace U7005
(I2C is OK?)
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Check the voltage
C7045 = 1.8V Replace U6003
Yes
No
Check 6Axis No
TP7014, TP7015, TP7016, Replace U7004
TP7017, TP7018 (SPI is OK?)
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No Reconnect.
Check the Fingerprint Sensor
connector If broken, Replace the broken part
(SUB PBA or Fingerprint Module
Yes
No
Check the voltage No
Swap the Main FPCB and Re-test
C1002 =3.3V @operation FP
recognition Replace U6003
Yes
No
No
Check the Fingerprint Sensor
MISO, MOSI, CLK, CS_N Pins Replace UCP4000
(SPI is OK?)
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
No
Check the voltage
C7042 = 1.8V Replace U6003
Yes
No
No
Check Light
R4010, R4012 Replace U7003
(I2C is OK?)
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Yes
No
No
Check Sub PBA Swap SUB PBA MAIN1001 or L1012
L1012 MAIN_MIC_P
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Yes
No
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Yes
No
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-12. BT/WIFI
Yes
No
No
Check BT or WIFI function ON Enable BT or WIFI function.
Yes
No
No
Check antenna contact Resolder or change the
ANT2002,ANT3000,ANT3002 ANT2002, ANT3000, ANT3002 REAR
REAR
Yes
No
Yes
No
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-13. GPS
Yes
No
No
Check GPS function ON Enable GPS Function in the setting.
Yes
No
No
Check the Antenna contact Resolder or change the
ANT2002 ANT2002
Yes
No
Check
No
C3045, C3013, C3099, C3048, L3013, Resolder or change the component if
C3050, C3051, C3052, L3015, there is something wrong.
F3002, U3005, F3003 (open, crack etc)
+ RF path
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-14. NFC
Yes
No
No
Check NFC function ON Enable NFC Function
Yes
No
Yes
No No
Resolder or change the component if
Check the component there is something wrong.
R3003, C3057, C3056, C3006 (open, crack etc)
+ RF RTX path
Yes
No No
Check OSC6000 and U3004
Check 19.2MHz Clock at
TP3013 and 1.8V C3050
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
FM is not working
Yes
No
No
Check the FM function Enable FM Function.
Yes
No
Check the status of No
EAR1001 Resolder EAR1001 or Replace SUB PBA
at SUB PBA
Yes
No
Yes
No
No
Check the status of C3035, L3011, Resolder or Replace C3035, L3011,
C3033, C3034 at MAIN PBA L3033, C3034
is it ok?
Yes
No
No
Check the status of ZD1013, L1026, Resolder or Replace ZD1013, L1026,
C1032, C1033, U1003, C1034 at SUB C1032, C1033, U1003, C1034
PBA. Is it ok?
Yes
No
Resolder or Replace
U3001
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-16. Display
Yes
No
Yes
No
No
Check the connection of Reconnect the SOC9000 on Main PBA
SOC9000 on Main PBA
Yes
No
Yes
No
No
Check Check L9003, L9005
ELVDD(L9003), ELVSS(L9005) And replace(If there are problem)
Check No
Check C6061, C6056
VCI(C6061), VDDI(C6056) And replace(If there are problem)
Yes
No
Yes
No
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
No
Check the Camera connector Reconnect
on Main PBA SOC8002, SOC8001, SOC8003, SOC8004
Yes
Yes
No
Check the CAM_MCLK is
Replace the PBA
19.2MHz (C8012, C9040, C8020)
24MHz (C8016)
Yes
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-18. VT CAMERA
Yes
No
Check the Camera connector
Reconnect the SOC8000
on Main PBA
Yes
C8002 : 1.8V
Yes
No
No
Check the VTCAM_MCLK is
Replace the PBA
24MHz (C8058)
Yes
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
8-4-19. Motor
Yes
Yes
No
Resolder or Replace
Voltage at ANT6000, C6077 = 3.3V? U6007
Yes
Replace Motor
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
Yes
Yes
i
Yes
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
Yes
Yes
Check U1002,U2007,U2001 No
Resolder or change
any damage RX path components
(Crack, open, etc), is it ok?
i
Yes
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
Yes
Yes
i
Yes
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
Yes
Yes
i Yes
Yes
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.
8. Level 3 Repair
Yes
Yes
Yes
No
Resolder or change
Change the board
TX path components
Yes
END
Confidential and proprietary-the contents in this service guide subject to change without prior notice
Distribution, transmission, or infringement of any content or data from this document without Samsung’s written authorization is strictly prohibited.