Professional Documents
Culture Documents
CODE: 211
LAMP: None
REASON: This fault indicates that the vehicle's electronic control unit (VECU), provided by the OEM,
detected an active fault in the vehicle's control system.
ACTION: Refer to the OEM for proper repair procedure. Clear inactive fault code using INSITE™ after
OEM problem is corrected.
CODE: 287
LAMP: Yellow
REASON: The OEM vehicle electronic control unit (VECU) detected a fault with its accelerator pedal.
ACTION: Refer to the OEM troubleshooting and repair manual. Troubleshoot the accelerator pedal
connected to the OEM supplied vehicle electronic control unit (VECU).
CODE: 288
LAMP: Yellow
REASON: The OEM vehicle electronic control unit (VECU) detected a fault with its remote throttle.
ACTION: Refer to the OEM troubleshooting and repair manual. Troubleshoot the remote throttle pedal
connected to the OEM supplied vehicle electronic control unit (VECU).
file:///C:/Users/user01/AppData/Local/Temp/~hhC2E0.htm 12/4/2023
Fault Code 211 Page 2 of 3
CODE: 319
REASON: Real-time clock lost power. Unswitched battery power to the ECM has been interrupted.
EFFECT: None on performance. Data in the ECM will not have accurate time and date information.
ACTION: Set real-time clock using RoadRelay™ (if equipped) or by using INSITE™.
CODE: 599
LAMP: Red
REASON: The dual-output feature in this customer-specialized calibration has initiated an engine
shutdown based on operating conditions, engine sensor values, or OEM inputs to the ECM.
ACTION: The dual-output feature is contained only in customer-specialized calibrations. The feature
can be set up to shut down the engine based on operating conditions, engine sensor values, or OEM
inputs to the ECM. The two OEM inputs are OEM switch input and OEM pressure input. The technician
must contact Cummins Engine Company to determine the dual-output feature's configuration to
understand which parameters and what parameter value(s) are causing the engine to shut down.
CODE: 611
LAMP: None
REASON: The engine was shut down with the keyswitch before proper engine cooldown.
ACTION: Hot shutdowns damage engine components and shorten engine life. Refer to the engine
operation and maintenance manual for proper cooldown techniques.
file:///C:/Users/user01/AppData/Local/Temp/~hhC2E0.htm 12/4/2023
Fault Code 211 Page 3 of 3
file:///C:/Users/user01/AppData/Local/Temp/~hhC2E0.htm 12/4/2023