Q
Reliance
POLYMERS
E E2 HIGH DENSITY POLYETHELENE
FOR ORIENTED TAPE
E20 is a High Density Polyethylene (HDPE) grade with low gel content, excellent elongation and orientation characteristics with
negligible water carry-over. This grade is recommended for making low denier rafia tapes with very good elongation and moderate
‘tenacity and recommended for wrapping fabrics fr various application.
‘Typical Characteristics
Property Test Method Unit "Wpical Value’
Density 23°C) ‘ASTM DI505 wee 0.952
MFT (2.16 ke) ASTM DI238 gO min 1a
“Tensile Strength at Yield (MD/TD) ASTM D882 MPa 30/32
Unimate Tensile Strength (MD/TD) ASTM D882 MPa 30/33
Elongation at Break (MD/TD) "ASTM D882 % 00/850
Dart impact Strength, Fi, ASTM DI709 em TS
“Tear Strength (MD/TD) ASTMDI922 sium 0408
‘pial Caractere ad not to be taken at pectin
‘pel Vales (Macha with 0 fm made wth O75men de gp 8278 BUR
Applications
Wrapping fabrics and oriented tapes.
Regulatory Information
+ Meets the requirements stipulated in standard IS : 10146 on "Specification for Polyethylene for safe use in contact with foodstuffs
pharmaceutical, and drinking water’. It also conforms to the positive list of constituents as prescribed in IS : 0141, The grade
and the additives incorporated initalso comply with the FDA:CFR Tile 2,177.1520, Olefin polymers.
Storage Recommend:
+ Bags shouldbe storedin dry/ closed conditionsat temperatures below 50°C and protected from UV direct sunlight
7708, Ema paar ppp ren Wate wernt