You are on page 1of 2

BPS Series

Slim Photoelectric Sensor For Long Sensing Distance


Features
● Easy to mount by Flat type
● Realization of 3m sensing distance as small size
● Protection structure IP67 (IEC standard)

Please read “Caution for your safety” in operation


manual before using.

Specifications
NPN open collector
BPS3M-TDT BPS3M-TDTL
output
Model
PNP open collector
BPS3M-TDT-P BPS3M-TDTL-P
output
Sensing type Through-beam

Sensing target Opaque materials of Min. Ø5mm

Operation mode Dark ON Light ON

Sensing distance 3m

Response time Max. 1ms

Power supply 12-24VDC ±10% (Ripple P-P: Max. 10%)

Current consumption Max. 20mA

Light source Infrared LED (850nm)


NPN or PNP open collector output
Control output ●Load voltage: Max. 30VDC ●Load current: Max. 100mA
●Residual voltage - NPN: Max. 1V, PNP: Max. 2.5V
Protection circuit Reverse polarity protection, Output short-circuit protection

Indicator Emitter: Power indicator (red LED), Receiver: Operation indicator (red LED)

Insulation resistance Min. 20MΩ (at 500VDC megger)

Noise resistance ±240V the square wave noise (pulse width: 1㎲) by the noise simulator

Dielectric strength 1,000VAC 50/60Hz for 1minute

Vibration 1.5mm amplitude at frequency of 10 to 55Hz (for 1 min.) in each X, Y, Z direction for 2 hours

Shock 500m/s² (approx. 50G) in each X, Y, Z direction for 3 times

Ambient illumination Sunlight: Max. 11,000㏓ , Incandescent lamp: Max. 3,000㏓ (Receiver illumination)
Environ-
Ambient temperature -25 to 65℃, storage: -25 to 70℃
ment
Ambient humidity 35 to 85%RH, storage: 35 to 90%RH

Protection structure IP67 (IEC standard)

Material Case: PC
Ø3mm, 3-wire, Length: 2m (Emitter of through-beam type: Ø3mm, 2-wire, Length: 2m)
Cable
(AWG24, Core diameter: 0.08mm, Number of cores: 40, Insulator out diameter: Ø1mm)
Approval

Unit weight Approx. 66g


※The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment.

A-42
Slim And Amplifier Built-in Type

Feature Data (A)


Photoelectric
Sensors
Measuring method Parallel shifting characteristic Measuring method Sensor angle characteristic
3.0 (B)
Fiber
3.5
2.5 Optic
Receiver 3.0 Receiver Sensors
2.0
2.5

Sensing distance L (m)


Sensing distance L (m)
1.75 (C)
2.0 Door/Area
1.5 Sensors
1.5
L L 1.25
1.0 θ (D)
ℓ1 0.5 1.0 Proximity
Sensors
0 0.5
200 100 0 100 200
ℓ1 ℓ1 0 (E)
Emitter Emitter 20° 10° 0 10° 20° Pressure
Left Center Right Left Center Right Sensors
Sensing area (mm) Operation angle (θ)
(F)

Control Output Diagram Rotary


Encoders

● NPN open collector output ● PNP open collector output


(G)
Photoelectric sensor circuit Connection Photoelectric sensor circuit Connection Connectors/
Sockets
(Brown)+V (Brown)+V
Load 3.3Ω (H)
Main circuit

Over

Main circuit
(Black)output Max.100mA Temperature
current Controllers
+ 12-24VDC protection + 12-24VDC
Over Max.100mA (Black)output
- ±10% - ±10%
current (I)
protection 3.3Ω Load SSRs / Power
(Blue)0V (Blue)0V Controllers

Operation Mode (J)


Counters

Operation mode Light ON Dark ON ※If the control output terminal is


Received light Received light short-circuited or overcurrent (K)
Receiver operation condition exists, the control output Timers
Interrupted light Interrupted light
Operation indicator ON ON turns OFF due to protection circuit.
(red LED) OFF OFF ※Dark ON mode is standard and (L)
Panel
ON ON Light ON (Received light: ON) Meters
Transistor output mode is customizable.
OFF OFF
(M)

Connections Tacho /
Speed / Pulse
Meters

NPN open collector output PNP open collector output


(N)
Display
● BPS3M-TDT1 (Brown)+V ● BPS3M-TDT1 (Brown)+V Units
+ +
12-24VDC 12-24VDC
- (O)
(Blue)0V (Blue)0V - Sensor
(Emitter) (Emitter) Controllers

● BPS3M-TDT2 / BPS3M-TDTL2 ● BPS3M-TDT2-P / BPS3M-TDTL2-P


(P)
(Brown)+V (Brown)+V Switching
Mode Power
(Black)Output Load + (Black)Output + Supplies
12-24VDC 12-24VDC
(Blue)0V - (Blue)0V Load - (Q)
(Receiver) (Receiver) Stepper Motors
& Drivers
& Controllers

Dimensions ●Cover (sold separately) (unit: mm) (R)


Graphic/
Optical Logic
16 axis 0.3 7.5 11.4
Panels

(S)
Emitter: Power indicator Field
Receiver: Operation indicator 19 9.5 Network
Devices
14.8 5.5
(T)
28

Software
17

Optical
axis
25.8

57.2
30
2.5

5.5

12 M3 Bolt Cable:Ø3, 2m
4.5

12.7 2-M4 Bolt

A-43

You might also like