Professional Documents
Culture Documents
2022
Mutlukent, 2038. Sk. No:3 / 1, Çankaya / Ankara TURKİYE
MILITARY PRODUCTS
Fixed Blade Knife 61
Handcuffs 61
AEGEAN Defense is located in Ankara-Turkey, dealing with Military and Avia on Projects more than 15 years. ATM Ammo Crate
Military Camo Face Mask
61
61
BelOMO POSP 4x24 62
Tactical CNC 62
UltraFire WF-506B Handheld Flashlight
63
We, not only serving to Turkish Govt but also managing projects in worldwide, USA and also Middle East. OPS-CORE – FAST ST High Cut Helmet
EYE PROTECTION WILEY X – Saber Advanced Sunglasses 63
64
EYE PROTECTION 3M - PELTOR ComTac III Advance Combat Helmet
PLATE CARRIER & ARMOR KIT
AR550 Level III+ Multi-Curve with Anti-Spall Protection with the Condor MOPC 65
Valise Balistique cover 65
MAGAZINE POUCHES
Chase Tactical – Warrior Assault AK 66
TACTICAL GLOVES
5.11 – Competition Shooting Gloves 66
ELBOW & KNEE PADS
AEGEAN Defense is working focused on reliable technologies & right solu ons, following the changes in technologies, 5.11 – EXO.K1 Elbow and Knee Pads
TACTICAL BELT KIT 1
66
67
TACTICAL BELT KIT 2 67
TACTICAL BOOTS
ALTAMA– FoxHound SR 8” Boots
genera ng unique and new projects to become a leader company regarding to new concepts and projects HANDHELD RADIO
Motorola – APX 8000 All-Band Portable Radio
68
GPS NAVIGATION 71
Garmin Foretrex 601 Wrist-Mounted GPS Navigator 72
Pantalons et chaussures tactiques
Tenue tactique Gen3 desert camo 73
Blouson Anti lame 75
Tear gas 75
75
AE-PEL
AEGEAN Defense has strong capabili es in Foreign Military Acquisi on; all echelons of training from combat skills 75
23
23 Unmanned reusable aircraft for launching rocket-propelled grenades PG-7 77
NW-PEL in flight 78
through Combat Lifesaver to NATO Integra on and Command Post Opera ons along with Opera ons & Maintenance. NW-PEL in the launch container 78
24
CROSSBOW
24
25
ANTl-TANK GUIDED MISSILE SYSTEM 79-80
25
Small
Arms
Ammunition
5 SMALL ARMS AMMUNITION SMALL ARMS AMMUNITION 6
8
ARTILLERY ROUNDS
Artillery Rounds 10
ARTILLERY ROUNDS
11 ARTILLERY ROUNDS ARTILLERY ROUNDS 12
13 ROUNDS FOR GRENADE LAUNCHERS ROUNDS FOR GRENADE LAUNCHERS 14
15 ROUNDS FOR ANTI-TANK SYSTEMS MORTAR BOMBS 16
17 MORTAR BOMBS COMBAT & NON-LETHAL HAND GRENADES 18
19 COMBAT & NON-LETHAL HAND GRENADES
21 SMALL ARMS SMALL ARMS 22
23 SMALL ARMS
25 SMALL ARMS AMMUNITION SMALL ARMS AMMUNITION 26
27 LIGHT MACHINE GUNS LIGHT MACHINE GUNS 28
29 MACHINE GUNS RECOILLESS SYSTEMS 30
31 MORTARS MORTARS 32
33 AIR DEFENCE SYSTEM ADS ARTILLERY ROUNDS 24
35 ANTI - TANK GUIDED WEAPON ANTI - TANK GUIDED WEAPON 36
37 EXPLOSIVES
39 COPMLEX “SPEAR” COMPLEX “SPEAR” 40
PREEMINENCES
Equipping of artillery units provides the tubing artillery with principally new
abilities:
- allows to change the traditional way of firing the group targets (“firing at
squares”) for highly precise defeating of individual targets - including point
targets such as tanks, IFVs, field fortifications and others - with a high probability
of first round shot. At the same time the demands to the firing zone are reduced
and to the artillery defensive fire;
- artillery unit can fire at group targets without changing gun settings, calculated
relatively to the center of targets’ grouping;
Gun D-20
152mm Krab
155mm
Gvozdika
152mm Msta-S
Command, control, communications,
computer and intelligence (C4I) centers
152mm
43 ARTILLERY SYSTEM ARTILLERY SYSTEM 44
Shot synchronization
means
Guided artillery
projectile
Laser target
designator/rangefinder Guided artillery
projectile
Semi-Active Selfguidance
1Д15 45 20000 Yes,afixingset 54 transportable
Type of targets n/d stationary stationary or stationary or stationary or DHY LW, firm ≥80 10000 STANAG3733 270x76x55 – laser 1,4 - laser transportable
CILAS,FRANCE moduleAlaDemR module
moving with speed moving with speed moving with speed AlaDemR
up to 10 m/s up to 10 m/s up to 10 m/s
Projectile weight, 62 49,5 50,8 45 no more than 52 MiniPOP-D, firm n/d n/d NATO coding diameter–204, 7,7 Compact multysensor
ІАІ,ISRAEL compatible heiht–280 electronically-optical
kg
stabilizedplatformwith
Explosive weight, 6,7 5,8 6,5 5,5 not less than 8 designator
kg
Length, mm 1370 1195 1300 960 1225
Caliber, mm 155 152 152 152 155 D CoMPASS, firm 80 20000 up to 20 pps n/d 90 lbs Compactmultysensor
Type of warhead shaped high-explosive high-explosive high-explosive high-explosive ELBIT Systems of electronically-optical
America,USA stabilized platform
fragmentation fragmentation fragmentation fragmentation withdesignator
47 ARTILLERY ROUNDS NIGHT VISION GOGGLES 48
ADVANTAGES
due to the possibility of use of modern small -sized remotely operated Laser
rangefinder/designator in artillery complex the possibility of operator hit is
minimized;
the area of use of guided artillery projectiles with laser semi -active heads
situated near enemy location without need of deploying staff t designates
behind line of contact is expanded.
Laser rangefinder/designator
on gyro-stabilized platform can be
designed for use in remote
intelligence, target detection and
their highlighting on operator’s
commands when mounted on
drone.
49 BLOOD STOPPER BLOOD STOPPER 50
BLOOD STOPPER
Product Presentation STOP BLEEDING
= LİVES
AIM
In military actions,50% of traumatic deaths are caused by bleeding.
Control of bleeding is normally done by liquid/tampon products.
Other than military services our product is available to be used by all
security personnel and civilians in case of injuries that cause blood loss.
Blood Stopper hasCE Certificate and T.C Ministry of Health permits and SCIENTIFIC INFRASTRUCTURE
licenses.
All scientific studies and publications related to our product can be
Also, our product is the ONLY locally available product. In this regard, the viewed from the links below.
Blood Stopper does not damage the wounded area. It also keeps the Universities where other scientific researches are conducted;
injured area suitable for surgical operation. It does not cause necro
-
Istanbul University Medical School Ankara University Medical School
sis and does not have an allergic side effect. Furthermore helping to heal
Fatih University Medical School Samsun 19 Mayıs University Medical School
faster with anti-fungal and anti-bacterial features.
Süleyman Demirel University Medical School Marmara University Medical School
Van 100.Yıl University Medical School Hacettepe University Medical School
Gazi University Medical School Zonguldak Karaelmas University Medical School
BLOOD STOPPER
ABOUTTHEPRODUCT
53 BLOOD STOPPER BLOOD STOPPER 54
Armed forces which are using ballistic protective plates and ballistic
protective panels are protecting only 15% of their total body surface
area (vital organs). OUR PRODUCT TYPES;
Blood stopper tampon 2,5cm x 7cm Contains 3 ml of raw material
The ballistic protective helmet is produced as level 3A and does not Blood stopper tampon 5cm x 5cm Contains 5 ml of raw material
have protective properties for threats within the framework of calibers Blood stopper tampon 5cm x 7,5cm Contains 10 ml of raw material
expressed as rifle bullet class. The helmet is protective against shrapnel Blood stopper tampon 20cm x 20cm Contains 100 ml of raw material
and gun class calibers. The head is the most vital area, which makes the
use of blood stopper much more cruital. OUR SALES PRICE;
The sales price of Blood Stopper per ml is 50 TL + VAT.
50% of deaths due to trauma
in military operations are caused by bleeding.
3 ml 150 TL+VAT or 18 USD + tax
Thanks to the Blood Stopper, it is possible to prevent blood loss 5 ml 250 TL+VAT or 30 USD + tax
for the remaining 85% of the body surface area, ensuring the sur- 10 ml 500 TL+VAT or 60 USD + tax
vival of the armed forces and transfer to the nearest intervention 100 ml 5000 TL+VAT or 600 USD + tax
point. Therefore, hemostatic blood stopper should be considered as
a by-product of ballistic protective gear.
%15
Protected Area
Unprotected Area %85
TAMPO N
$300
UsageAreas
Armed forces
Police Forces
Back Plate Front Plate
Product Cost Ambulances
$200 $200 Benefit Analysis Emergency Services
Hospitals
Total average costof ballistic products purchased for soldiers or
2 side plates All Health Units
security forces based on standard products in the World.
$200
First Aid Units
$900
Natural Disaster Areas
On the other hand, 10 ml Blood Stopper product that is needed to stop
blood loss in areas other than ballistic surfaces which corresponds to
Search and Rescue Missions
85% of the total body surface area. Firefighters
Social Areas
$30 / 5ml | $60 / 10ml
AIR-DEFENSE MISSILE SYSTEM TRIO 56
SYSTEM COMPOSITION:
■ A mobile control center based on a light armored
vehicle ASILAK-ASV (MCC)
■ Combat vehicle of a short-range air defense missile
system.
Optical-electronic station
STRIZH-M3
The optoelectronic station is a multispectral system that ensures reconnaissance of airspace
around the clock, as well as automatic detection and tracking of targets with their exact
coordinates determination and calculation of target lead.
Combat vehicle of a short-range air defense missile system 700 1 400 4 000
Image transfer
Frame rate
Ethernet
30 HZ
Control Ethernet
based on ASILAK 1 700 3 300
4 500
10 000
10 000 30 000
Battery/Power 19 – 32 V
Power consumption 120 W
Identification (m) Recognition (on the STANAG 4347) (m) Detection (m) Operating temperature range -40°С...+50°С
The project to improve the combat capabilities of the R-60BM guided aircraft missile involves
two versions – the R-60-NT-L and the R-60-NT-T. The first type has a semi-active laser
seeker, and the second one has an infrared seeker. semi-active laser or
Seeker
■ The R-60-NT-L missile is designed to hit targets marked by a laser designator. It is passive thermal imaging
supposed to engage mainly the ground targets with the use of artillery laser designators- Target engagement range, km 0.2 – 20 km
The vehicle is equipped with modern reconnaissance means - the Strizh-M3 round-the-clock COMPOSITION OF FIGHTING VEHICLE: rangefinders.
passive optical-electronic station, capable of detecting and tracking targets from a range of Target engagement altitude, km 15 km
■ light armored wheeled chassis ASILAK with autonomous equipment power supply sys- ■ The R-60-NT-T missile with an infrared seeker is designed to hit low-temperature (low-
20 km, automatically calculating the position of the target relative to the air defense missile tem based on a diesel-generator set of variable power up to 8 kW; Missile speed, m/s 730 – 850 m/s
system's launch zone and warn the operator of the combat vehicle that the target is within its contrast) objectives. It is supposed to engage mainly the small-size air targets.
■ remote controlled unmanned weapon station with a launcher that provides placement, Kill probability (by one missile) 0.9
boundaries. In addition, a forced turn of the launcher to the point of probable appearance of Both missiles are equipped with a new multi-beam laser proximity fuze that provides a
the target is provided for firing on a catch-up course. ■ preparation, guidance and launch of 4 surface-to-air missiles of R-60 BM (MALANKA ) continuous field of view, which significantly increases the probability of engaging small targets. Max overload, g 30 g
To combat small air targets, including unmanned aerial vehicles, the combat vehicle can fire type; Engagable target overload, g 12 g
During the upgrading of the R-60BM (MALANKA) rocket, the design, technological and
with missiles R-60BM (MALANKA) ■ automated workstation; aeroballistic characteristics have been preserved to the maximum. Controlled flight time, s 20 s
Crew of the fighting vehicle - 2 people (driver and commander). ■ airborne navigation and orientation system;
The R-60-NT-L and R-60-NT-T missiles can be installed on standard aircraft launchers, as Engine type double–mode missile engine solid–fuel
■ data equipment. well as placed in transport and launch containers when used as part of anti-aircraft missile
systems. Guidance system homing
MOBILE CONTROL CENTER 60
ASILAK ASV The monitors installed in the MCC display in real time the air and tactical situation on the
battlefield, as well as video images obtained from optoelectronic and thermal imaging
surveillance and reconnaissance equipment.
Information on the targets detected and received from the supporting radio engineering
units and the higher command post is processed and issued in the form of target
designations to the TRIO air defense missile systems.
The Data-processing and Computer Complex of the mobile intelligence and control station
performs round-the-clock acoustic and optical reconnaissance using passive detection
methods with automatic output of the required calculated data of air and ground targets for
their fire engagement.
It provides secrecy of created position defense, and the available technical means allow of
round-the-clock reconnaissance. The software allows it to make quick distribution and
assignment of all targets for weapons for their guaranteed destruction.
The SOKOL optical all-round visibility and location system which is part of the MCC allows
reconnaissance of an air enemy at a distance of up to 20,000 m in full stealth mode ..
The MCC crew consists of four people - a driver, a commander and two operators
Camo uniform with Smith & Wesson SW3B 12.8in S.S. BelOMO POSP 4x24
VM (BM)
Handcuffs
Military Camo Face Mask Bandana Balaclava UltraFire WF-506B Handheld Flashlight
Hood Headwear for Men Women Tac cal 1000 Lumen Super Brigh LED 5 Light
Training Cycling Ski Wind-Resistant Hun ng Modes with Nylon Flashlight Holder Duty
Belt Holster for AK47
23
63 MILITARY PRODUCTS
ARTILLERY ROUNDS MILITARY
ARTILLERYPRODUCTS
ROUNDS 24
64
HELMETS
OPS-CORE – FAST ST High Cut Helmet
GPS NAVIGATION
GARMİN Foretrex 601 Wrist-Mounted GPS Navigator
Blouson An lame
23
77 ARTILLERY ROUNDS
AE-PEL ARTILLERY ROUNDS
AE-PEL 24
78
high-explosive fragmentation
Armor penetration behind ERA (angle of incidence is 60°) Up to 1400mm; not less than 800mm
meeting at an angle of 60°.
Aiming TV channel detection range of the target at daytime: not less than 10 km.
at nighttime, using TI camera: ot
less than 8 km.
FORMAL PROPOSAL FOR THE SUPPLY, INSTALLATION, COMMISSIONING, 1.2 DEGREASING WASHING UNIT TYPE (DG55)
• This surface treatment unit is dedicated for the degreasing of brass, tombac, or bimetal for SSA
and start-up Of 5.56x45mm, 7.62x39mm, 7.62X51mm and 7.62x54mm
• The unit is completely made of stainless steel 316 L including frame and preheating tanks
AMMUNITION PRODUCTION LINE • The unit is equipped with a perforated rotating stainless steel 316 L drum containing a screw conveyor that allows a continuous
and regular transfer of the components
• Drying is performed by blowing hot air directly onto products inside the drum
Introduction
• Capacity: max 650 da3/hr (components with treatment fluids), operation sequence: -degreasing, rinsing, rinsing and hot air dry
Please find enclosed the details of our formal offer to supply, install, commission and start-up of the 5.56x45mm, 7.62x39 mm, • 55 cm Rotary Drum System
7.62x51mm, 7.62x54 mm series production line as a turnkey proposal. The details of this proposal are strictly confidential. • Total power supply: 65 KVA
• Case production starting form annealed &pickled brass cup (CuZn70). • 380v-3 Phase- 50Hz
• Bullet jacket starting from annealed &pickled brass cup(CuZn90). • The unit is controlled by programming logical control (PLC)
• Bullet core lead antimony core. • Load and Unload Chute
• Cartridge assembling, primer, propellant powder and varnishes • Water supply: 400l/hr
Our proposal relies on the developed technology of Aegean all parts and machines are warranted and serviced by our company • The drying is performed by blowing hot air directly onto products inside the drum
in Turkey. • Machine overall dimensions 1,6x2,2x4,7 meter
Our technical trained staff will be active in supporting the installation and the manufacture of the products using our production line. • 6 bar compressed air
Our skilled engineering facility based in Ankara offers its full support in the future research and development of ammunition • Automatic level check for each tank
production and armourment products. • Overflow Chute
• Ventilation Fan
Scope of the Offer
• Ground container
• Delivery of KNOW HOW for technical documentation for small calibers ammunition production and design.
• Automatic chemical density adjustment
• Delivery of all process equipment and specifications of each machine. DEGREASING UNIT
• Delivery of shooting range. 1.3 NORMALIZATION FURNACE TYPE
• Delivery of necessary spare parts for two-years.
• This furnace is dedicated to perform annealing operation on small arms ammunition cases. This type of annealing (gradual
• Service during installation and supervision of installed equipment
recrystallization) is applied for partial material annealing after case drawing operation
• Maintenance and tooling workshop.
• Capacity: 500 kg/hr
SECTION 1 • Conveyer wired line SS 314
CASE PRODUCTION “Start from annealed & pickled Brass Cups” • The conveyor supported by roller each 60 cm with automatic tension for conveyor by springs.
• Loading with elevator
• Vertical multi –station transfer press allowing multiple interstage for SSA cases
• Discharge with Hopper
• Caliber range: 9mm-7.62 etc
• 60 kw
• Theoretical rate: 120 ppm
• Max. Temp. 450c
• Products are transferred by linear transfer bar equipped with grips and component presence checking devices
• The furnace is high insulated by special material which could stand 1.000 Celsius
• Removable die set for different calibers
• The furnace has different heating zones. With variable speed control.
• Punch holder slide operate by crankshaft and double connecting rods
• Electric resistance supported by ceramic pipes. And easy to change.
• Ejection punches operated by cam control lever
• Conveyer wired line
• Automatic feeding of cups by feed hopper
• PID heat control system.
• Max. Force: 40 tons
• Vacuum system for outgases.
• Automatic Lubrication System
• Manuel conveyor control in case of power failure.
• No. Of stages :4 basic
• PLC
• Component lubrication attachment when drawing operation with separate tank and pump
• Dimensions 1,5x3,4x8 meter
• Functions controlled by programmable logic controller (PLC)
• Compressed air: 6 bar
• İnstalled power: 28 KVA
• Drawing lubrication tank: 300 liters
• Sound Enclosure
1.4 PICKLING WASHING UNIT TYPE (PK55) 1.6 DEGREASING /POLISHING UNIT TYPE (DP35)
• This surface treatment unit is dedicated for pickling of brass , tombac and bi-metal for SSA • This equipment is dedicated to perform the degreasing and polishing operations on small brass components such as cartridge case
• The machine is completely made of stainless steel 316 L including frame and shielding • 180 liters per cycle
• The unit is equipped with a perforated rotating stainless steel 316 L drum containing a screw conveyor that allows a continuous and • Operating vibrating bowl
regular transfer of the components • Sequence of operation: degreasing , rinsing , polishing rinsing and drying by hot air
• The drying is performed by blowing hot air directly onto the products inside the drum • Feeding System
• Capacity: max. 650 dm3/hr components with treatment fluid , operation sequence: pickling ,rinsing , rinsing , soaping and hot air drying • Compressed air : 6 bar
• 55 cm rotary drum • Min. Water pressure 2-3 bar
• 380v-3 Phase- 50Hz • Wet or dry medium
• The unit is controlled by programming logic control (PLC) • Elevator for feedıng by components boxes
• Load and Unload Chute • Dosıng pump for degreasıng agent
• Water supply : 400 l/h • Water valve supply and volume meter
• Total power supply 70 KVA • Installed power 18KW
• Machine overall dimensions 1,6x2,2x5,7 meter • Plc control
• 6 bar compressed air
• Automatic level check for each tank
• Overflow Chute DEGREASING AND POLISHING UNIT
• Ventilation Fan
• Ground container 1.7 CASE GROOVING MACHINE TYPE (KK 44)
• Automatic chemical density adjustment • Machine is dedicated for extraction groove turning
• Machine is fitted with a feed hopper loading the cases to the distribution block and are pushed one by one into rotating spindle
PICKLING UNIT • Tool on independent slide achieve the machining operation with tool holder slide actuated by fast approach motion
• After turning operation the components is ejected from the spindle by second case
1.5 Multi station vertical transfer press type (KK8) • Driving motor for spindle rotating
• Compressed air : 6 bar
• Mechanical vertical transfer press provided with in line working tool stations, it is mainly composed of well dimensioned
Monobloc frame made of cast iron, it is ensured optimum resistance and stiffness qualities
• Upper main slide with precision guiding operated by a double-throw crankshaft. punch holders are fitted on the slide
1.8 CASE LEGTH TRIMMING MACHINE TYPE (KK45)
• Machine is indicated for case length trimming and mouth chamfering
• Lower ejector holders operated by cam and levers
• Machine is fitted with a feed hopper loading the cases on distributing block and are pushed one by one into rotating spindle
• Transfer slide operated by cam oscillator box (in oil bath)
• Tool on independent slide achieve the machining operation with tool holder slide actuated by fast approach motion
• Tool bloc bearing the sets of dies and ejectors
• After turning operation, the components are ejected from the spindle by second case
• Sequence of operation:
-draw feeding
-Indenting
-Heading and stamp marking
-Fire hole piercing 1.9 INSPECTION UNIT TYPE
-Fire hole presence check
• Automatic Accept/Reject System
-1st tapering
• Digital Display, easy set up
-2nd tapering and mouth sizing
• Gravity fed, high wear stainless steel V-track
-discharge
• Windows XP Software interface
• Capacity: 120 ppm
• Eight cameras with directional lighting & mounts
• Removable die set for flexible caliber change over
• Computers & custom software for case vision
• Automated Lubrication System
• 360 Laser Head
• 100 ton crank driven transfer press
• 3.5 m elevator hoppers
• Feeding System
• Feeding System
• The press controlled by programming logic control (PLC)
• Primer vision
• Sound Enclosure
• Mouth vision
GROOVING AND TRIMMING MACHINE
• 3-D Primer depth vision
• Capacity: 300 pcs/min
MULTI-STATION VERTICAL TRANSFER PRESS
23
85 ARTILLERY ROUNDS
AMMUNITION PRODUCTION LINE AMMUNITION PRODUCTION
ARTILLERY LINE
ROUNDS 24
86
SECTION 3
3. PRIMING AND LOADING LINE 3.3 INSPECTION MACHINE TYPE
3.1 PRIMING AND VARNISHING MACHINE TYPE (KF4) • Automatic Accept/Reject System
• Digital Display, easy set up
• The machine is dedicated to insert primer and crimp, varnish the primer and case mouth • Gravity fed, high wear stainless steel V-track
• Sequence of operations: case feeding, mouth roundness and primer pocket presence checking, fire hole presencechecking, primer insert, • Windows XP Software interface
primer depth checking, crimping 3 points or 360 degree, primer and mouth inside varnishing • Eight cameras with directional lighting & mounts
• The machine runs according to the indexed linear motion principle • Computers & custom software for case vision
• The incoming components transfer automatically from one station to the next one • 360 Laser Head
• Drying of varnish is done by transfer rail • 3.5 m elevator hoppers
• Primer is fed by vibrating bowl enclosed in an armored protection hood • Feeding System
• Machine functions managed by programmable logic controller • Primer vision
• Power: 15 KVA • 3-D Primer depth vision
• Compressed air: 16 bar • Capacity: 100 pcs/min 100% INPECTION MACHINE
• Capacity: 70 ppm
• Case feeding
• Primer fed by vibrating bowl
• Sequence of operation:
• Primer chamber depth checking
• Primer chamber min. Diameter checking
3.4 COMPLETE CARTRIDGE WEIGHTER MACHINE
• Automatic and continuous motion weight checking for complete cartridge by mean of an electronic weighting unit
• Case drying
• Capacity: 70 pcs/min
• Accuracy: 0.3 gm
SECTION 4-5
4. SHOOTING RANGE (without construction) 6.3 QUALITY CONTROL
Shooting range testing equipment: 2 Sets of manual production and quality control gauges will supply with the line
• Internal ,external and terminal ballistic test systems for small army ammunition
• The hardware and software compose the system enabling ballistic data acquisition and evaluation 6.4 DELIVERY TIMELINE
• The basic system consist of: Delivery of the machines will be completed 8-12 months
• Universal receiver for barrel
• Barrels for accuracy 6.5 INSTALLATION, COMMISSIONING, AND STARTUP
• Pressure checking by piezoelectric transduces or by crusher
7.62 PRODUCTION LINES installation, commissioning, and startup of the total production line machinery shall include the wiring, mounting and
• Light barrel for velocity checking
assembly of all component parts to completely make operable the production line with trial production.
• Computer and printer with adequate software for data
For trial production the supplier shall provide all the material (exclude the powder and the primer) because the supplier does not have license
• Additional equipment:
from the Turkish Government.
• Climatic cabinets for high and low temperature ballistic test
Installation of the production machinery shall include footings and hold down bolt plans but shall not include any major civil works. For example
• Cartridge drilling device for pressure test
forklift or Crane..etc under responsibility of buyer.
5. Laboratory testing includes All electrical outlets shall be draw to a point along the factory wall for the outputs required, it shall be the supplier’s responsibility to take the power
• Bullet extraction test from the termination box supplied at the factory but not to supply the main power.
• Residual stress Water pipes and compressed dry air must be draw to a point near the building
Transmission
8x8
80kW
Nominal torque
250-300 N*m
Speed
2-58km/h
Distance
130km
OVERVIEW
MOSQUITO Introduction