Professional Documents
Culture Documents
01
CATALOGUE 2019.01
Company Profile 1
Technical Information 2
At that time, Mr.Giovanni Mauri (President We always keep in mind that our customers
and founder of Brevetti Stendalto) designed have to be “free to project”. This is Brevetti
and started proposing nylon cable chains to Stendalto’s philosophy, and to empower it,
be applied where steel cable chains were too we can offer our “Total Chain System”, a new
heavy and expensive to fulfil customers’ concept of cable chains completely finished
Chain testing rig for long travel: Tests at 8 m/s for 130 m travels.
needs. 1989
with extra flexible cables and connectors.
Patent for the circular nylon cable chain. From the customer’s point of view, it means
Looking beyond, he got off more than a new saving costs due to wiring, assembling and
line of products, he gave the original profile installation time, reducing possible problems,
to the Company: a successful collection of and being certain to choose components of
innovation, technical support, pragmatic the highest reliability available on the market.
solutions and products with the best cost &
benefit ratio, able to give customers a real So, let’s keep on growing together, still going
added value to the long-term partnership with ahead.
Brevetti.
2 3
Versatile Automation UNI EN ISO 9001:2008
Each aspect of production, whether it be the In Brevetti Stendalto the quality is a result of our activities.
preparation of moulds and their subsequent To be a success and reference company Brevetti Stendalto strives for:
shaping or component manufacture and assembly,
1 is monitored closely.
The Company endeavours to adopt the most
• full satisfaction of our customers ever increasing requests.
• continuing improvement of our company capacities.
1
up-to-date technology available. Considerable • valorization and improvement of our human recourses.
resources are invested into this, ensuring the • involvement of all our staff in striving for quality assurance.
highest standard of products on the market.
• careful selection of suppliers and involvement of these in our quality process.
Production moulds are manufactured using
modern CNC machine-tools. • standardization of production, to assure competitive products.
Mould of Light series cable chain. • innovative products to meet the markets ever increasing requests.
Brevetti Stendalto manufacturing process • fast assistance to guarantee the customers reduced breakdown time.
(internal moulding department and complete
automated assembly lines) ensures quality and
short delivery times.
Complete automated assembly lines ensure a high
standard of quality chains.
Products
Tender
Acceptance of order
Special design
Completely automated assembly
lines ensure a high standard of Standard mail-order catalogue
quality chains. Design
Needs
Production
Certificate Delivery
UNI EN ISO 9001:2008
Customer's Service
Operative flow diagram
4 5
The Way to Automation
Past experience acquired in the marketing of Our products can be found in many applications, Brevetti Stendalto products are used in many, We are always close to our Clients. Our
machine tools has prompted Brevetti Stendalto to especially in the field of automated production, very different, fields of application. We have distribution network, consisting of manufacturing
Wending robot
equipped with
a nylon cable chain
type 510 and
guide support.
6 7
Always Available
Technical Office
Competence and availability are the key words in
technical assistance.
All technical needs and installation characteristic
requests are carefully evaluated and verified with
the support of informatics and CAD-3D
projection that will solve the problems as they
arrive.
8 9
Technical Information
Mounting Variations
Chains placed horizontally page 14
Chains placed vertically page 16
Chains with circular motion page 17
2
Going Further
Self-supporting capacity page 18
Determining the length of the chain page 19
Vertical applications page 20
Horizontal applications (side-mounted) page 21
Long horizontal travel distances page 22
Guide channels for sliding chains page 24
How to install the cable chains in the guide channel page 25
Rotating horizontally page 26
Rotation with Robot type chains page 28
Support roller units page 30
Way of mounting end brackets page 31
Guide channel page 32
Split cross pieces from the Heavy/Sliding series page 33
Materials used page 34
11
Necessary Data to Determine Placement of Cables/Hoses
the Type of Cable Chain in the Cable Chains
The choice of cable chain should not only be To guarantee that cable chain functions
based on a mathematical calculation of certain properly and to avoid any damage to the
factors but should consider and analyse cables/hoses within, certain criteria concerning
carefully all the available data. The following the placement must be followed:
information will be provide a basic help in
making the right decision.
D D
Kg
12 13
Mounting Variations
Horizontal with mobile point below Horizontal with mobile point below. Chain making a ring configuration. Long horizontal - 2 chains
(to the car). (see page 22).
Model 700
chains in nylon
superimposed on a machine
which works with marble.
Combination of both vertical and horizontal movement. Superimposed chains. Horizontal with chain mounted on its side
(see page 21).
14 15
Mounting Variations
2 2
Vertical with curve below Combination of both vertical and horizontal movement. Chain for circular movement - 1 chain Chain for circular movement - 2 chains
(see page 20). (see page 26). (see page 26).
Vertical with curve above ROBOT type chain for circular motion.
(see page 20). (see page 28).
16 17
Self-Supporting Capacity Determining the Chain length
A fundamental element in cable chains is the necessary to use the appropriate support rollers Fixed point at the centre of total travel.
pre-set Z (Fig. A). (see page 30), in order to confirm chain
This determines the self-supporting capacity, a reliability in exceptional applications.
characteristic which allows the cable chain to All the H-heights reported into this catalogue
support not only it’s own weight, but also the are not including any Z-value due to the
weight of the cables/hoses placed in it and to preload, therefore, whenever limitations to the LS
keep its parallel or slightly curved upward maximum allowable height are required, you
position (Fig. B). should refer to Brevetti Stendalto's Technical X
The diagram of self-supporting capacity (Fig. C), Dptm. R
2 indicates the weight relation of cables/hoses per
linear meter to the lengths of self-supporting
Brevetti Stendalto chains, thanks to their
specific construction, reach remarkably high
values of self-supporting capacity and
2
chain travel. The red-area indicates the difference
between min/max chain widths, while the widest acceleration with long periods of motion,
version has the lowest self-support capacity. reaching millions of cycles. L= LS + M
For particular applications (e.g. vertical travel), 2
With the application of cable chains with LS
and weights not included in the area of the 2 the chains can be provided without pre-set.
The chain length (L) is calculated by summarising the half stroke LS to the nominal value (M)
diagram of self-supporting capacity, it’s 2
of the bending radius.
The value is then rounded up the multiply of the chain's pitch for nylon cable chains and to an
Fig. A Fig. C odd multiply for steel chains.
30
20
15
10
Fixed point not positioned at the centre of total travel.
8
6
5
4
LS
Additional load (kg/m)
Fig. B 3
2 LS
Widest chain version
1,5
2
1 R
0 1 2 3 4
LS Max unsupported length
2
M
L= LS + M + DPF
DPF
2
The chain length (L) is calculated by summarising the half stroke LS to the nominal value (M)
2
of the bending radius and the distance (DPF) from fixed point to centre of total stroke.
The value is then rounded up the multiply of the chain's pitch for nylon cable chains and to an
odd multiply for steel chains.
Where:
L = Length of chain
LS = Half travel distance
2
M = Length of curve (π x R) + (2 x P)
DPF = Distance from fixed point to centre of total stroke
P = Pitch
Nylon chain, type 310, in a
18 self-supporting state. 19
Going Further Going Further
Vertical Applications The use of standard cable chains for vertical Horizontal Applications on Their
The problems related to vertical applications applications could result in difficulties due to the Sides
are solved by using Brevetti Stendalto cable pre-set. we therefore recommend to specify: Brevetti Stendalto cable chains can be
chains. It is however necessary to respect the “without pre-set for vertical applications” when mounted on their sides.
following: ordering. By doing this the cable chain will be
delivered to you without pre-set.
2 2
GUIDING CHANNEL
The placement of the cable/hoses is very important to ensure If the application only concerns one vertical movement the This kind of mounting becomes necessary when there is a For particularly long applications a guiding channel can be
the application works properly. Cables/hoses have to be fixed cable chain does not need any particular support. limited space upwards and mounting the chain normally designed.
at both ends using the appropriate accessories so as not to would take up too much space.
make their weight disturb the cable chain. In this type of
application the cable chain should only guide the
cables/hoses during their movement.
PIVOTING WHEEL
ANTI-FRICTION SKID
If the cable chain also moves across and/or longitudinally, When applying the cable chain in this way some support is To make the movement easier and to reduce any friction on If there is no possibility for a plane to support the cable chain
certain measures have to be taken laterally. For special needed to avoid the chain to unbalance itself outwardly. the cable chain, special changeable anti-friction skids or during it’s movement, Brevetti Stendalto chains can be
applications, frames with completely closed guiding systems Generally the cable chain must be supported both on the pivoting wheels have been designed. applied without support taking into consideration the
are available. fixed and mobile points. following factors:
- total travel distance LS
- added weight
- velocity and acceleration
- frequency of usage
SPACER
SEPARATOR
Long Horizontal Travel Distance Sliding series is the integrated sliding skid which
Cable chains are used more frequently on long permit the chains to slide on themselves
travel distances as a valid alternative to the reducing the friction due to the special
traditional systems of conductor bars or to polymers used.
festoon systems, and offer the following The dimensions of the skid allow the chain to
advantages: keep itself stable in applications with high
velocities.
• The possibility of the combined transportation On request it’s possible to produce cable chains
of hydraulic cables/tubes.
2 • The possibility of use also in critical
environments (humidity, textile dust, negative
with special polyamides for applying in
particularly aggressive environments.
The triple pins guarantee more reliability and
2
chemical and atmospheric components etc.). strength even in applications with the added
• High velocities and values of acceleration. weight being very high. The chains in the Sliding
• Notably shorter installation times. series have been tested using torsion, wear and
• Drastic reduction in the time taken for tear tests passing the tensile yield stress with
maintenance. extremely good results, above high normal
values (e.g. 318 21000 N).
The special aspect of the cable chains in the
In double chain
applications, the chains
slide on themselves in both
directions.
LS
LS LS
2 2
R
Skids
22 23
Going Further
2 2
20
STANDARD END BRACKETS
AT THE FIXED POINT
Verify that the sides are aligned properly to avoid any internal Install the cable chain with the standard end brackets at the
edges in the guide channel which could disturb the cable fixed point and with the movable end brackets at the moving
chain’s route. point respecting the height listed in the catalogue.
MAX 500 mm
Verify that the plane on which the guide channel for sliding is Reduce as much as possible the distance between the fixed Install the mobile point of the cable chain aligning it exactly to
mounted is perfectly aligned and smooth. point of the cable chain and the starting point of the rollers or the longitudinal travel distance in such a way so that during
sliding plane. its movement it does not touch the internal part of the guide
channel (Fig. A).
MAX 500 mm
Guide channel for chains Verify that the distance between the guide channel for In the case of a double chain application ensure that the To facilitate this operation Brevetti Stendalto has developed
of the Sliding series. sliding and the towing arm is the same for the whole distance between the two fixed points doesn’t exceed 500mm. and created a special movable end bracket which guarantees
travelling distance. a perfect alignment between the chain and the towing arm
(Fig. B).
24 25
Going Further
Rotating Horizontally PROTECTION series, can be supplied with this Application of Horizontally
For certain applications it necessary that the counter-radius. Generally the chains with count- Rotating Chains
cable chains perform an opposite movement er-radius are used to resolve the problems rela- Chains can reach a maximum rotation of 540°.
from that determined by the radius of the tive to rotations where, in this case, it would not For a correct usage they should be
curvature (counter-radius chains). All Brevetti be possible to use cable chains from the guided both internally and externally.
Stendalto chains, except those from the ROBOT series.
2 Application with 2
superimposed chains.
Rotation 180°
2
GUIDE HOUSING
With the use of counter-radius chains it is possible to create For applications with rotations over 180° it is necessary to
rotations both on small and large equipment use two cable chains. For a correct usage they should be
(e.g. parabolic antennas, rotating tables, cranes, telescopes). guided both internally and externally. A special inner movable
frame, mounted on anti-friction skids or pivoting wheels in
combination to the guide housing guarantees the rotation.
GUIDE HOUSING
INNER MOVABLE
FRAME ANTI-FRICTION
SKIDS
INNER MOVABLE
FRAME
To facilitate the sliding and reduce the friction of the cable PIVOTING
chain, special changeable skids or pivoting wheels are taken WHEELS
into account.
With this kind of application it is also possible to rotate
vertically.
Seen the particular aspects of these applications we advise
you to contact and consult our technical office.
26 27
Rotation with ROBOT Type Chains The chains from the “ROBOT” series, like all Applications with Robot Series
In its continuous technological evolution, Brevetti Stendalto chains, can be modified for Chains
Brevetti Stendalto has revolutionised since work in special applications. Using support rollers or support hooks, chains
1989 the concept of circular chains introducing When the use of one cable chain is not can reach a maximum rotation of 540°.
the chains from the “ROBOT” series that, due sufficient to contain all the cables/hoses it’s
to the particular construction of the links, possible to use several chains in the same
permit them to rotate up to 540°. application to increase the space
to hold them.
2 2
Supporting Hook
This must be selected according to the method
of chain fixation.
-Left type with left fixed point chain (A)
SUPPORTING HOOK
A B
Fig. A
The stability of the chains permits rotations at higher The chains from the “ROBOT” series are self-supporting and
velocities without the need for guiding supports. they do not need any support up to 200°. For applications
Only the base on which the cable leans has to have a with rotations exceeding that value it is necessary to use its
configuration inclined to make its own travel distance easier. own appropriate accessories. To reduce the problems of
Appropriate support guides are available if it is not possible taking up too much space which generally is the case with
to take them directly from the machine. the supports, especially on robots, Brevetti Stendalto has
developed a series of supports which are capable of solving
the problem. Support hooks view.
Welding robot
equipped with
a nylon cable chain
type 510
and guide support.
28 29
Going Further
Support Roller Units necessary to use the appropriate support Ways of Mounting End Brackets
For applications of cable chains with LS
2
rollers. The end brackets make the installation of the chains possible. They are available both in nylon
and weights not included in the area To decide on the number of support rollers and in steel. The end brackets in nylon, due to their particular construction with holes for
of the diagram of self-supporting capacity it is needed, note the following: mounting on three sides, allow the chain to be installed in the four positions seen below.
For the end bracket in steel instead it is necessary to specify the position of mounting. If this is not
specified it will be supplied in Pos.1.
One Support Roller when: Two Support Rollers when: Our technical office is at your disposal to solve any installation query.
2 Pos. 1 Pos. 2
2
Support Roller for Nylon Chains Support Roller for Steel Chains Pos. 3 Pos. 4
Pos. 5 Pos. 6
Chain Type X Y L
20 70 100 W+22
30 70 100 W+22
35 70 100 W+26
40 70 100 W+26
45 130 180 W+26
30 31
Going Further
2 339...
300A...
300...
A+2
A+2
A+2
30
15
15
1,5
1,5
1,5
2
305A... A+2 20 1,5
305... A+2 20 1,5
355A... A+2 25 1,5
15° 355... A+2 25 1,5
L (cm) 400... A+2 25 1,5
435... A+2 30 1,5 The new nylon split cross piece can open by an easy to open Aluminium rods screwed at the links. Maximum strength in
A5 H hinge, offering a security. every application. Possibilities in customising it’s width. A sepa-
S 445... A+2 30 1,5
ration of cables system.
660A... A+2 30 1,5
770A... A+2 30 1,5
475.... A+2 50 1,5
306... A+2 30 1,5
307... A+2 30 1,5
308... A+2 40 1,5
309... A+2 50 1,5
310T... A+2 80 1,5
660... A+2 30 1,5
770... A+2 30 1,5
20... W+2 30 1,5
30... W+2 40 1,5 Nylon split cross pieces with holes. Many possibilities of Nylon split cross pieces which open by a zip, to facilitate the
choice between the standard models or special version on operations of positioning the cables internally in the chain.
35... W+2 50 request.
40...*
45...*
Special Versions:
*Seen the particular aspects of these chains we advise
consultation with our technical office.
The guide channel is delivered in laminar zinc in pieces of
2000 mm. It is available on request in stainless steel.
Split cross pieces made on request. The ideal solution in the Larger split cross pieces. For the transportation of hoses of
case of numerous cables with limited amount of space. notable dimensions.
32 33
BRYLON 6 Technical Data
Materials Used Norms Properties Units Typical values Dry
Dry Conditioned H2O < 0,15%
Thermal properties
DSC Melting point (10° C/min.) °C 222 Conditioned
ASTM - D 696 Coefficient of linear thermal expansion X10-6 K-1 28 equilibrium moisture content
ASTM D 648 Heat distortion temperature at 23° - 50% R.H.
ISO 75 1.82 N/mm2 °C 210
The Brevetti Stendalto cable chains in nylon Working Temperature DIN 53461 0.45 N/mm2 °C 220
U. L. 94 Flammability H.B.
are developed with a special polyamide Brevetti Stendalto cable chains made of polymers IEC 695-2-1 Incandescent wire
reinforced with glass fibre, BRYLON 6. can be used in application with a temperature Temperature °C 650
Thickness mm 3
The high resistance to tension, the low range between -25° +125°. In case of application Flammability
coefficient of friction together with the general with “continuous” temperature lower than -15° and ASTM-D 257 Volume resistivity Ohm cm 1015 1011
ASTM-D 257 Surface resistivity Ohm 1013 1011
characteristics of the most evolved compound higher than +95°, the mechanical values could be ASTM-D 149 Dielectric strength KV/mm 22
thermoplastics, allow the cable chains to be reduced. In both the cases Brevetti Stendalto is ASTM-D 150 Dielectric constant (10 Hz) — 3.8 4.5
ASTM-D 150 Dissipation factor (10Hz)) — 0.02 0.09
used in all environments and temperatures. able to offer solutions using special compounds; Physical properties
The main characteristics of BRYLON 6 are: please consult us. On request it is possible ASTM-D 792 Density g/cm3 1.38
ASTM-D 570 Water absorption at 23°C in water for 24 hours % 0.90
to create and develop cable chains using special Mechanical properties
Self-Extinguishing
2 Brylon 6 has the certificate UL94HB. On request
the use of the polyamide V0 or V2 can be used.
polyamides to be used in the following applications:
Ex-Proof
ASTM-D 638
ISO R/527
DIN 53455
ASTM-D 638
Tensile yield stress
Ultimate elongation
N/mm2
%
195
2.6
115
4 2
The resistance at eventual sparks is good. Cable chains complying with ATEX ISO R/527 Tensile modulus of elasticity N/mm2 10600 6900
Directive 94/9/CE. Nylon cable chains, DIN 53457
UV Rays to be used in explosion high-risk
ASTM-D 790
ISO 178 Flexural strength N/mm2 310 190
Brylon 6 is resistant to UV rays and it’s environments, can be supplied made of the special DIN 53452
ASTM-D 790 Flexural modulus N/mm2 10500 6800
therefore suitable for external applications. material BRYLON AD. For further information ISO 178
Chemical Resistance please refer to Brevetti Stendalto’s Technical Office. ASTM-D 256 Unnotched Izod impact strength J/m 140 300
ISO 180/4C Notched Izod impact strength KJ/m2 110 125
Brylon 6 is generally resistant to oils, grease, petrol, Clean room-proof ASTM-D 785 Rockwell hardness Scala R 122 114
ammonia and water (sea water). Problems could To be used in clean rooms.
The standard version of the TESTED
arise with the presence of acids. (See the detailed D E V I CE Chemical Resistance
table showing resistance to various cable chain 305A009 Brevetti Nylon Chain
Report No. BS 0005-172 BRYLON 6 STEEL The table shows the
chemical agents). has been tested and resistance to chemical
Chemical agents Concentration % Amorphous Crystal Concentration % agents of BRYLON 6 and
proved to be Class 1. For further information you Methyl acetate 100 RB3 RB2 100 RB
Acetone 100 RB4 RB 100 RB Steel.
may require the proper documentation to our Acetic acid (aqueous solution) 40 AF AF 40 AF
technical department. Acetic acid (aqueous solution) 10 AF AF 10 AF RB
Acetic acid AF AF AF Very good resistance.
Citric acid 10 AD 15 RD 10 AD
RD
The Colouring. Hydrochloric acid (aqueous solution)
Hydrochloric acid (aqueous solution)
36
10
S
AF
S
AF
36
10
S
S Good resistance.
The standard colouring of the Brevetti Stendalto being a body in movement. The high production Hydrochloric acid (aqueous solution) 2 AF AD 2 S
Chromic acid (aqueous solution) 10 AF AF 10 AF AD
cable chains is to have the links in black and the flexibility of Brevetti Stendalto, permits the Chromic acid (aqueous solution) 1 RD RD 1 AF Limited resistance.
pins in yellow. creation of nylon cable chains in various colour Hydrofluoric acid 40 AF AF 40 S
Formic acid (aqueous solution) 85 S S 85 S AD AF
This combination, apart from being eye-catching combinations which can be adjusted to the Formic acid (aqueous solution) 40 S AF AF 40 S AD Poor resistance.
colours of the equipment. Phosphoric acid (aqueous solution) 10 AF AF 10 S
represents a further security measure, the chain Oleic acid 100 RB3 RB3 100 RD S
Sulphuric acid 98 S S 98 S Soluble.
Sulphuric acid (aqueous solution) 40 AF AF 40 S
Colour options. Sulphuric acid (aqueous solution) 10 AF AF 10 S Amorphous
Sulphuric acid (aqueous solution) 2 AF AD 2 S Polymer in amorphous state.
Tartaric acid (aqueous solution) RD RB RD
Links Water RB10 RB9 RD Crystal
standard colour: black Chlorine water RD RD AD
Ethyl alcohol 96 RD17 RB3 96 RB
Polymer in crystalline state.
colours by request: yellow,
Ammonia 10 RB11 RB 10 AF
red, blue, green, grey. Petrol 100 RB1 RB 100 RB The number by resistance
Bitumen RD RD RB value side shows which is
Pins Potassium carbonate 100 RB RB 100 AF
Sodium carbonate 10 RB10 RB3 10 AF the % weight increase due
standard colour: yellow
Ammonium chloride (aqueous solution) 10 RB RB 10 AF to swelling.
colours by request: black, Calcium chloride (aqueous solution) 20 S S 20 AF
red, blue, green. Calcium chloride (aqueous solution) 10 RB RB 10 AF All data contained in this
Sodium chloride 10 RB RB 10 AF
Formaldehyde (aqueous solution) 30 RD RB 30 AD publication are laboratory
Fat RB RB RB and design values, to be
Milk RB RB RB verified in practical
Mercury RB RB RB
Oils RB RB RB
applications.
Oil RB RB RB
Paraffin oil RB RB RB
Silicon oil RB RB RB
Diesel oil RB RB RB
Mineral oil RB RB RB
Ozone AF AF AF
Oil RB RB RB
Potassium hydroxide (aqueous solution) 10 RB9 RB3 10 S
Sodium hydroxide (aqueous solution) 50 RD RD 50 S
Sodium hydroxide (aqueous solution) 10 RB5 RB 10 S
Sodium hydroxide (aqueous solution) 5 RB9 RB 5 S
Aluminium sulphate 10 RB RB 10 AF
Soap (aqueous solution) RB RB RB
700 yellow nylon chain with Tincture of iodine AF AF AD
the pins in black. Trichloroethylene RD5 RD4 RB
Vaseline RB RB RB
34 35
Nylon Cable Chain
37
Nylon Cable Chains
Light Series
Cross pieces open and close with a Nylon separator. Cables can be laid
“Snap-Fit” action apart from each other
200 Series page 40
250L-250LI-250LE Series page 42
325LI/LE Series page 44
325L Series page 46
335L-335LI-335LE Series page 48
339 Series page 50
Channel guide for long travel distance
For 250L-300 Series page 52
For 325L-325LI/LE/PI-335L/LI/LE-339 Series page 54
3
Inner surface of chain
completely smooth
39
®
200
Nylon Cable Chain
1
0,9
0,8
0,7
0,6
Technical characteristics A B C D R Weight/m Chain 0,5
8 5 7.5
The red marking in the
.5
.5
Ø3
Ø3
Length of chain (L)
diagram area considers the
Half travel distance ( LS ) difference of weight between 15
2
plus length of curve (M) various widths of chain. F1
L= LS + M
2
For applications with LS2
and weights not included in
the area of the diagram
Chain F1 F
showing self-supporting
Type mm mm
capacity, verify the possible
20025... 13 41
use of support rollers (see
20035... 23 51
page 30).
Nylon Type
Part Numbers
Complete Set Assembled
Chain End Brackets
Type Set
20012... AN20012KM]**
20025... AN20025KM]**
20035... AN20035KM]**
Complete Set Unassembled
Chain End Brackets
Type Set
20012 AN20012K For further information please
20025... AN20025K consult Brevetti Stendalto’s
20035... AN20035K Technical Office
250L/LI/LE
Nylon Cable Chain
A
Inner height (D) 17 mm A A C Self-Supporting End Brackets
Single link construction. C C Capacity Diagram The end brackets set allows the
Non-opening version (250L). The maximum length of the
self-supporting capacity ( LS )
two ends of the chain to be
250L
Version with opening frames from inner 17 23 1,5 17 23 1,5 17 23 2 attached to the equipment.
radius (250LI) or from outer radius
(250LE).
in relationship to the weight
of the cables and hoses
End brackets are equipped
with tiewrap clamps.
250LI
Vertical separators available.
250L 250LI 250LE
contained per linear metre.
250LE
Nylon Cable Chain
1
0,9
0,8
0,7
0,6
Separator A B C D R Weight/m Chain 0,5
when self-supported *Complete the code by inserting the value of the radius (R): Ex. 250LI035 0 3 8 0,1
Fig. A
0 0,5 1 1,5 2 Chain fixed outside the radius. (Fig A)
Speed 10 m/s See end brackets mounting
LS Max unsupported length
variations page 31.
Acceleration 50 m/s2 2
LS
R H N M N1 M1
For higher requirements please consult our LS mm mm mm mm mm mm LS
technical dept. 2 N L 51
028 79 68,5 146 120 255 LS 13,5
R 038 99 78,5 177 125 270 2
29 M H 045 113 85,5 199 250 530
060 143 100,5 246 400 850 6,2
075 173 115,5 294 505 1085
100 223 140,5 372 650 1405 The red marking in the 11
For sliding applications, LS diagram area considers the
technical data can slightly 250L...015... 14 6,5
LS difference of weight between 250L...025...
change according to fre- 2 Length of chain (L)
MOVING POINT M1 R various widths of chain.
Half travel distance ( LS )
quency, added weight and 6,2
environment. H 2 11
100 How to open the cover.
plus length of curve (M) o (M1)
!
SLIDING VERSION FIXED POINT N1 F
to be ordered with pivoting L= LS + M o M1 For applications with LS2
end brackets set 2 and weights not included in
the area of the diagram 250L...035...
250L...050...
6,5
showing self-supporting
capacity, verify the possible Chain F1
use of support rollers (see Type mm
page 30). 250L...035... 21
250L...050... 36
42 43
®
325LI/325LE
Nylon Cable Chain
with opening frames
Inner height (D) 25 mm A Separator Self-Supporting End Brackets
Single link construction with central C - Unassembled Part.no S325L Capacity Diagram The end brackets set allows the two ends of the chain to be
large anti-friction pivot, for high torsion
and tensile resistance.
- Assembled Part.no S325LMC The maximum length of the
self-supporting capacity ( LS
2
)
attached to the equipment. EBs tiewrap clamps and/or
centre-distance reducers fully available under request.
325LI
Frames opening from inner radius
(325LI) or from outer radius (325LE). 2,5 2538
in relationship to the weight
of the cables and hoses
Nylon Type Bright Zinc Plated Steel
Type***
325LE
Nylon Cable Chain
Vertical separators contained per linear metre. with opening frames
available. Used with guide channels,
this chain is particularly suitable for long
10
distance travel. 9
8
7
6
3 Acceleration 50 m/s
For higher requirements please consult our
2
93
120
38
38
76
103
25
25
050-060-075-100-125-150
050-060-075-100-125-150
1,05
1,15
325LI(LE)076
325LI(LE)103
*
*
1,5
1
Separation System
To choose the separators,
see page 196
3
technical dept. *Complete the code by inserting the value of the radius (R): Ex. 325LI040 0 5 0 0,5
0 0,5 1 1,5 2 2,5 Fig. A Fig. B
LS Max unsupported length Chain fixed outside/inside the Chain fixed outside the radius. (Fig B) Nylon end brackets
2 radius. (Fig A) See end brackets mounting centre-distance
variations page 31. reducers
LS N R H N M N1 M1 LS 60,5 L 66,5
LS Ø8,5 50 L 50 Reducers mounted on the inner radius
mm mm mm mm mm mm LS 14
2 2 7
R
!
SLIDING VERSION For applications with LS 325L...076 87 58 325L...076 58 61,5
to be ordered with pivoting 2
Length of chain (L) and weights not included in 325L...103 114 85 325L...103 85 88,5
end brackets set
Half travel distance ( LS ) the area of the diagram
Nylon Type Bright Zinc Plated Steel
2 showing self-supporting
plus length of curve (M) or (M1) Part Numbers Type Part Numbers
capacity, verify the possible
L= LS + M or M1 use of support rollers (see Complete Set Assembled Complete Set Unassembled
2 page 30). Chain End Brackets Chain End Brackets
Type Set Type Set
325L... AN325L *KM 325L... A325LK
Complete Set Unassembled Tiewrap Clamp
Chain End Brackets Part Number
Type Set Assembled
325L... AN325L *K CFC325L *KM Suitable to long travel distance.
Unassembled To choose the guide channel
Tiewrap Clamp see page 54
CFC325L *K
Part Number
* Inner width (C)
Assembled *** Available on request in stainless steel
CFC325L *KM
Unassembled
CFC325L *K
Centre-distance Reducers Set For further information please
Part Number consult Brevetti Stendalto’s
Technical Office
Unassembled AQF325K
44 45
®
325L
Nylon Cable Chain
3 Acceleration 50 m/s
For higher requirements please consult our
2
93
120
38
38
76
103
25
25
050-060-075-100-125-150
050-060-075-100-125-150
1,05
1,15
325L076
325L103
*
*
1,5
1
3
technical dept. *Complete the code by inserting the value of the radius (R): Ex. 325L040 0 5 0 0,5
0 0,5 1 1,5 2 2,5 Fig. A Fig. B
LS Max unsupported length Chain fixed outside/inside the Chain fixed outside or inside the Nylon end brackets
2 radius. (Fig A) radius. (Fig B) centre-distance
reducers
LS N R H N M N1 M1 LS 60,5 L 66,5
LS Ø8,5 50 L 50 Reducers mounted on the inner radius
mm mm mm mm mm mm LS 14
2 2 7
R
335L/LI/LE
Nylon Cable Chain
A Self-Supporting End Brackets
Inner height (D) 35 mm C Separator
Single link construction with central - Unassembled Part.no S4353 Capacity Diagram The end brackets set allows the two ends of the chain to
large anti-friction pivot, for high torsion
and tensile resistance.
- Assembled Part.no S4353MC The maximum length of the
self-supporting capacity ( LS
2
)
be attached to the equipment.
Set complete with tiewrap clamps available on request.
335L
Non-opening version (335L).
Version with opening frames from inner 3 35 50
in relationship to the weight
of the cables and hoses
Nylon Type 335LI
radius (335LI) or from outer radius
(335LE).
contained per linear metre.
335LE
Nylon Cable Chain
Vertical separators available.
15
13
10
9
Acceleration 50 m/s2
2,5
Fig. A Separation System
76,5 50 60 35 065-075-100-125-150-200 1,16 335L(LI)(LE)060 * 2
The chain can be fixed frontally, To choose the separators,
For higher requirements please consult our 92,5 50 76 35 065-075-100-125-150-200 1,22 335L(LI)(LE)076 * 1,5
inner or outer radius. (Fig A) see page 196
technical dept. 119,5 50 103 35 065-075-100-125-150-200 1,32 335L(LI)(LE)103 * 1
!
SLIDING VERSION
to be ordered with pivoting
showing self-supporting 335L...150 135 161
end brackets set capacity, verify the possible
use of support rollers (see Nylon Type
page 30). Part Numbers
Complete Set Assembled
335L 335LI 335LE Chain End Brackets
Non-opening Frames opening from inner radius Frames opening from outer radius Type Set
335 AN335L]]]*KM]**
Complete Set Unassembled
Chain End Brackets Suitable to long travel distance.
Type Set To choose the guide channel
335 AN335L]]]*K see page 54
Tiewrap Clamp
Part Number
335 PFN335]]]*
* Inner width (C)
** 1=Pos.1; 2=Pos.2; 3=Pos.3
For further information please
consult Brevetti Stendalto’s
Technical Office
48 49
®
339
Nylon Cable Chain
3 Acceleration 50 m/s2
For higher requirements please consult our
96 50 76 39 050-075-100 1,65
*Complete the code by inserting the value of the radius (R): Ex. 339076 1 0 0
339076 *
2,5
2
1,5
Fig. A
Chain fixed outside the radius. (Fig A)
See end brackets mounting
3
technical dept. 1 variations page 31
0 0,5 1 1,5 2 2,5 3
55 L 55
LS Max unsupported length
2
LS N R H N M N1 M1 LS
8,5 24 8,5
LS mm mm mm mm mm mm LS 14
2 2
R 050 156 115 230 140 275
41 6,5 F
075 206 135 305 215 470
35
M H 100 256 160 385 310 705
50 51
®
Guide Channel
250L-300
Special channel guide allows the use of Guide Empty Section
the chain for long travel distance. Section A-A
Available in galvanised steel and, on Part Number
request, in stainless steel. CS250…
How to order
A1+30
Chain part number 250L035060
A1=A+4
Guide channel
part number CS250L035
Single Chain Application
70
LS
1,5
LS LS
2 2
3
R SEAT FOR SCREW
M6 UNI 5933
A B
A B
3 GUIDE EMPTY SECTION GUIDE WITH SLIDING PLATE SECTION Guide Sliding Plate Section
Section B-B 3
Part Number
CA250…
How to order
Double Chain Application A1+30
Chain part number 250L035060
A1=A+4 Guide channel
LS part number CA250L035
23,5
LS LS
2 2
70
1,5
R
A A
3
SEAT FOR SCREW
M6 UNI 5933
A A
GUIDE EMPTY CHANNEL
2000
SIDE WALL
52 53
®
Guide Channel
325L-325LI/LE/PI-335L/LI/LE-339
Special channel guide allows the use of Guide Empty Section
the chain for long travel distance. Section A-A
Available in galvanised steel and, on Part Number
request, in stainless steel. CS325L-LI-LE
How to order
Chain part number 325L040050
A1=A+4 Chain part number 325LI040050
Single Chain Application Chain part number 325LE040050
96.5
LS
LS LS Guide channel
20
2 2 A2=A+87 part number CS325L040
R
A B
A
A B
3 GUIDE EMPTY SECTION GUIDE WITH SLIDING PLATE SECTION Guide Sliding Plate Section 325...
Section B-B 3
Part Number
CA325L-LI-LE
How to order
Double Chain Application
Chain part number 325L040050
A1=A+4 Chain part number 325LI040050
LS
Chain part number 325LE040050
37
96.5
LS LS
2 2
R Guide channel
20
A2=A+87 part number CA325040
A A
A A
GUIDE EMPTY SECTION
50
96.5
fixing screws
20
A2=A+87
2000
FIXING PLATE
SIDE WALL
JOINING AND
SUPPORT PLATE For further information please
consult Brevetti Stendalto’s
BASE
Technical Office
54 55
Nylon Cable Chains Cross pieces open and close with a Nylon separator. Cables can be laid
apart from each other
“Snap-Fit” action
Medium Series
57
®
300A
Nylon Cable Chain
with opening frames
Inner height (D) 18 mm A Separator Self-Supporting End Brackets
Single link construction with - Unassembled Part.no S300A Capacity Diagram The end brackets set allows the two ends of the chain to be attached to
C
anti-friction single-pin.
Frames opening from inner radius.
- Assembled
Pin
Part.no S300AMC The maximum length of the
self-supporting capacity ( LS
2
)
the equipment. Set complete with tiewrap clamps available on request.
Nylon Type Bright Zinc Plated Steel
300A
Nylon Cable Chain
in relationship to the weight
Vertical separators available.
1,5 18 23 Part.no PG300A
of the cables and hoses
Type*** with opening frames
The wide frames on out radius offer
good protection, when operating contained per linear metre.
horizontally.
6
5
4
3
3 Acceleration 50 m/s
For higher requirements please consult our
2
62
87
23
23
50
75
18
18
040-060-080-120
040-060-080-120
0,55
0,65
300A050
300A075
*
*
0,4
0,3
0,2
Fig. A
Chain fixed outside the radius. (Fig A)
Fig. B
Chain fixed outside the radius. (Fig B)
See end brackets mounting
3
technical dept. *Complete the code by inserting the value of the radius (R): Ex. 300A015 0 4 0 0,1 variations page 31.
0 0,5 1 1,5 2
L 32 L 31,5
LS Max unsupported length
2
LS N R H N M
LS mm mm mm mm LS 50
2 LS 12 8
R 040 103 85 185 12 6
2
8,5
12
060 143 105 250
30 080 183 125 315
M H
120 263 165 440
300A015... 5,5 300A015... 5,5
300A025... 300A025...
The red marking in the 13 15
Length of chain (L) diagram area considers the
Half travel distance ( LS ) difference of weight between
2 F F
plus length of curve (M) various widths of chain.
8,5
12
L= LS + M
300A050... 300A050...
300A075...
5,5 300A075... 5,5
2 How to open the cover.
For applications with LS2 Chain F Chain F
and weights not included in Type mm Type mm
the area of the diagram 300A050 25 300A050 25
showing self-supporting 300A075 50 300A075 50
capacity, verify the possible
use of support rollers (see Nylon Type Bright Zinc Plated Steel
page 30). Part Numbers Type Part Numbers
Complete Set Assembled Complete Set Assembled
Chain End Brackets Chain End Brackets
Type Set Type Set
300A... AN300A *KM 300A... A300A *KM
Complete Set Unassembled Complete Set Unassembled
Chain End Brackets Chain End Brackets Special tool to remove the
connecting pivots:
Type Set Type Set Part Number PZ010.
300A... AN300A *K 300A... A300A *K
Tiewrap Clamp Tiewrap Clamp
Part Number Part Number
Assembl. CFC300 *KM Assembl. CFC300 *KM
Unassembl. CFC300 *K Unassembl. CFC300 *K
* Inner width (C)
For further information please
*** Available on request in stainless steel
consult Brevetti Stendalto’s
Technical Office
58 59
®
300
Nylon Cable Chain
3 Acceleration 50 m/s
For higher requirements please consult our
2
52 23 36 18 040-060-080-120 0,48
*Complete the code by inserting the value of the radius (R): Ex. 300015 1 2 0
300035 *
0,4
0,3
0,2
3
technical dept. 0,1 Fig. A
0 0,5 1 1,5 2 Chain fixed outside the radius. (Fig A)
LS Max unsupported length See end brackets mounting
LS R H N M N1 M1 2 variations page 31.
LS N mm mm mm mm mm mm
2 LS
R 40 103 85 185 185 385
LS
30 60 143 105 248 410 865 2 L 30
M H
80 183 125 315 545 1165
120 263 165 440 750 1640
50
LS The red marking in the
For sliding applications, LS diagram area considers the 15 8
technical data can slightly 2 M1
change according to fre- MOVING POINT R difference of weight between
quency, added weight and H various widths of chain. 12
environment. 100
6,5
FIXED POINT N1
60 61
®
305A
Nylon Cable Chain
with removable frames
Inner height (D) 24 mm A Separator Self-Supporting End Brackets
Capacity Diagram The end brackets set allows the two ends of the chain to be
Double share single link joining C - Unassembled Part.no S305
construction with large anti-friction
single-pin. Frames removable from
- Assembled
Pin
Part.no S305MC The maximum length of the
self-supporting capacity ( LS
2
)
attached to the equipment.
Nylon Type Bright Zinc Plated Steel
305A
Nylon Cable Chain
inner radius. Vertical separators are
2,5 24 30 Part.no PG305
in relationship to the weight Type*** with removable frames
available. Wide frames on outer radius of the cables and hoses
offer good protection. Due to its design contained per linear metre.
with double-share lateral side, the
chain is very robust, meanwhile
10
offering very low friction. 9
8
7
6
Technical characteristics A B C D R Weight/m Chain 5
4,5
when self-supported mm mm mm mm mm kg Part Number 4
3,5
54 30 30 24 50 0,85 305A008
62 63
®
305
Nylon Cable Chain
64 65
®
355A
Nylon Cable Chain
with removable frames
Inner height (D) 31 mm Self-Supporting End Brackets
A Separator
Capacity Diagram The end brackets set allows the two ends of the chain to be
Double share single link joining - Unassembled Part.no S355
C
construction with large anti-friction
single-pin. Frames removable from
- Assembled
Pin
Part.no S355MC The maximum length of the
self-supporting capacity ( LS
2
)
attached to the equipment.
Nylon Type Bright Zinc Plated Steel
355A
Nylon Cable Chain
inner radius. Vertical separators are in relationship to the weight Type*** with removable frames
available. Wide frames on outer radius 2 31 43 Part.no PG355
of the cables and hoses
offer good protection. Due to its design contained per linear metre.
with double-share lateral side, the
chain is very robust, meanwhile
offering very low friction. 10
9
8
7
1,5
For higher requirements please consult our 74 43 45 31 200 1,40 355A048 Fig. A Fig. B
technical dept. 94 43 65 31 75 1,50 355A065 1 The chain can be fixed frontally, Chain fixed outside the radius. (Fig B)
94 43 65 31 100 1,50 355A066 0 0,5 1 1,5 2 2,5 inner or outer radius. (Fig A) See end brackets mounting
LS Max unsupported length variations page 31.
94 43 65 31 150 1,50 355A067 2
94 43 65 31 200 1,50 355A068
124 43 95 31 75 1,70 355A095 LS
124 43 95 31 100 1,70 355A096 LS 55 L 40
L ø5.5
124 43 95 31 150 1,70 355A097 2 18 10
124 43 95 31 200 1,70 355A098 14.5
16
14.5
ø9 ø5.5 65
LS N R H N M The red marking in the 6,5 12
How to open the cover.
LS mm mm mm mm diagram area considers the
2 R F
75 194 140 315 difference of weight between F
40 M H
100 244 165 395 various widths of chain.
15
150 344 215 555
200 444 265 710
Chain F Chain F
For applications with LS
Length of chain (L) 2 Type mm Type mm
and weights not included in
355A C=45 59 355A C=45 50
Half travel distance ( LS ) the area of the diagram
2 355A C=65 79 355A C=65 70
plus length of curve (M) showing self-supporting 355A C=95 109 355A C=95 100
capacity, verify the possible
L= LS + M use of support rollers (see
2 Nylon Type Bright Zinc Plated Steel
page 30).
Part Numbers Type Part Numbers
Complete Set Assembled Complete Set Assembled
Chain End Brackets Chain End Brackets
Type Set Type Set
355A C=45 AN355KM 355A C=45 AP355AKM1
355A C=65 AN355KM 355A C=65 AM355AKM1
Special tool to remove the
355A C=95 AN355KM 355A C=95 AG355AKM1 connecting pivots:
Complete Set Unassembled Complete Set Unassembled Part Number PZ010.
Chain End Brackets Chain End Brackets
Type Set Type Set
355A C=45 AN355K 355A C=45 AP355AK1
355A C=65 AN355K 355A C=65 AM355AK1
355A C=95 AN355K 355A C=95 AG355AK1
*** Available on request in stainless steel
For further information please
consult Brevetti Stendalto’s
Technical Office
66 67
®
355
Nylon Cable Chain
3 Acceleration 50 m/s
For higher requirements please consult our
2
74
74
43
43
45
45
30
30
100
150
1,35
1,35
355046
355047
2
1,5
1
Fig. A Fig. B
3
technical dept. 74 43 45 30 200 1,35 355048 The chain can be fixed frontally, Chain fixed outside the radius. (Fig B)
0 0,5 1 1,5 2 2,5
94 43 65 30 54 1,45 355064 inner or outer radius. (Fig A) See end brackets mounting
LS Max unsupported length
variations page 31.
94 43 65 30 75 1,45 355065 2
!
SLIDING VERSION 2 Complete Set Assembled Complete Set Assembled
to be ordered with pivoting Chain End Brackets Chain End Brackets
end brackets set
Type Set Type Set
355 C=45 AN355KM 355 C=45 AP355KM **
355 C=65 AN355KM 355 C=65 AM355KM **
Special tool to remove the
355 C=95 AN355KM 355 C=95 AG355KM ** connecting pivots:
Complete Set Unassembled Complete Set Unassembled Part Number PZ010.
Chain End Brackets Chain End Brackets
Type Set Type Set
355 C=45 AN355K 355 C=45 AP355K **
355 C=65 AN355K 355 C=65 AM355K **
355 C=95 AN355K 355 C=95 AG355K **
** 1=Pos.1; 2=Pos.2; 3=Pos.3
For further information please
*** Available on request in stainless steel
consult Brevetti Stendalto’s
Technical Office
68 69
®
400
Nylon Cable Chain
with removable frames
Inner height (D) 25 mm A Separator Self-Supporting End Brackets
Double share single link joining C - Unassembled Part.no S400 Capacity Diagram The end brackets set allows the two ends of the chain to be
construction with large anti-friction
single-pin. Frames removable from
- Assembled
Pin
Part.no S400MC The maximum length of the
self-supporting capacity ( LS
2
)
attached to the equipment.
Nylon Type Bright Zinc Plated Steel
400
Nylon Cable Chain
inner radius. Vertical separators are 2 25 35 Part.no PG305
in relationship to the weight
Type*** with removable frames
available. Wide frames on outer radius of the cables and hoses
offer good protection. Due to its design contained per linear metre.
with double-share lateral side, the
chain is very robust, meanwhile
10
offering very low friction.
A
9
8
7
1,5
For higher requirements please consult our 62 35 40 25 150 1,10 400043 Fig. A Fig. B
technical dept. 82 35 60 25 50 1,25 400060 1
Chain fixed outside/inside the Chain fixed outside the radius. (Fig B)
82 35 60 25 75 1,25 400061 0 0,5 1 1,5 2 2,5 radius. (Fig A) See end brackets mounting
LS Max unsupported length variations page 31.
82 35 60 25 100 1,25 400062 2
82 35 60 25 150 1,25 400063
50 L 50
8 17 17 8 L 40
LS N R H N M LS
LS LS
2
mm mm mm mm
R 2
50 138 110 240 ø5,5 ø5,5
75 188 135 315 ø5,5 ø5,5 6,5
40 M H
12
100 238 160 395
150 338 210 555 How to open the cover.
F F
70 71
®
435MU
Nylon Cable Chain with opening frames
17 7 17
ø5.5 11 24 11 Bright Zinc Plated
LS Steel Type***
LS N
R H N M N1 M1 LS
LS 2 15
mm mm mm mm mm mm
2 F F
R 060 169 135 290 195 410
075 199 155 340 250 540
50 H 6,5
M 100 249 175 415 335 760
125 299 200 495 420 975 The red marking in the Chain F Chain F L 107,5
150 349 230 575 505 1195 diagram area considers the Type mm Type mm
LS 200 449 275 730 680 1635 difference of weight between 435MU040 51 435MU040 26,5
For sliding applications, MOVING POINT LS various widths of chain. 435MU050 61 435MU050 36,5 8,5 24 8,5
technical data can slightly 2 M1 R 435MU060 71 435MU060 46,5
change according to fre-
quency, added weight and H
435MU076 87 435MU076 62,5 12
6,5
environment. 140 435MU097 108 435MU097 83,5 F
For applications with LS2 435MU103 114 435MU103 89,5
FIXED POINT N1
and weights not included in 435MU125 136 435MU125 111,5
!
SLIDING VERSION
to be ordered with pivoting the area of the diagram 435MU150 161 435MU150 136,5
end brackets set Length of chain (L)
showing self-supporting
Half travel distance ( LS ) Bright Zinc Plated Steel
2 capacity, verify the possible Nylon Type Nylon Type Type Part Numbers
plus length of curve (M) or (M1) use of support rollers (see Part Numbers Part Numbers
page 30). Complete Set Assembled
L= LS + M or M1 Complete Set Assembled Complete Set Assembled A435M *KM **
2 AN435M *KM AN435KM ****
Complete Set Unassembled
Complete Set Unassembled Complete Set Unassembled A435M *K **
AN435M *K AN435K ****
Tiewrap Clamp
Tiewrap Clamp Tiewrap Clamp Part Numbers
Part Numbers Part Numbers Complete Set Assembled
Complete Set Assembled Complete Set Assembled CFC435M *KM
CFC435M *KM CFC435M *KM Complete Set Unassembled
Complete Set Unassembled Complete Set Unassembled
CFC435M *K
CFC435M *K CFC435M *K
* Inner width (C)
****1=Pos.1; 2=Pos.2; 3=Pos.3 ** 1=Pos.1; 2=Pos.2; 3=Pos.3
5=Pos.5; 6=Pos.6 *** Available on request in stainless steel
72 73
®
445MU
Nylon Cable Chain with opening frames
3 Acceleration 50 m/s
For higher requirements please consult our
2
97
103
64
64
75
81
45
45
075-100-125-150-175-200-250-300
075-100-125-150-175-200-250-300
1,76
1,79
445MU075
445MU081
*
*
3
2
1,5
The chain can be fixed frontally,
inner or outer radius. (Fig A)
Chain fixed outside the radius. (Fig B)
See end brackets mounting
variations page 31.
1- Different fixing combinations.
2- Aluminum drawn with combs.
cable gland mounted either on the
fixed point or on the moving point.
3
technical dept. 107 64 85 45 075-100-125-150-175-200-250-300 1,82 445MU085 * 1
L 83,5 3- Space created for nut housing.
117 64 95 45 075-100-125-150-175-200-250-300 1,86 445MU095 * 0 1 2 3 4
L 81
LS Max unsupported length 19,5
LS N 122 64 100 45 075-100-125-150-175-200-250-300 1,87 445MU100 * 2
LS 129 64 107 45 075-100-125-150-175-200-250-300 1,90 445MU107 * 25
2 139 64 117 45 075-100-125-150-175-200-250-300 1,93 445MU117 * LS 19,5 6,2
R 20 10
Separation System page. 196
147 64 125 45 075-100-125-150-175-200-250-300 2,01 445MU125 * LS
67 2 12
M H 158 64 136 45 075-100-125-150-175-200-250-300 2,07 445MU136 * F
172 64 150 45 075-100-125-150-175-200-250-300 2,13 445MU150 * F
Bright Zinc Plated
197 64 175 45 075-100-125-150-175-200-250-300 2,25 445MU175 * Steel Type***
222 64 200 45 075-100-125-150-175-200-250-300 2,39 445MU200 * ø6,5 12,5 35 12,5
LS
233 64 211 45 075-100-125-150-175-200-250-300 2,44 445MU211 * The red marking in the Chain F Chain F
MOVING POINT LS 247 64 225 45 075-100-125-150-175-200-250-300 2,52 445MU225 *
2 M1 R
diagram area considers the Type mm Type mm
274 64 252 45 075-100-125-150-175-200-250-300 2,66 445MU252 * difference of weight between 445MU050 63 445MU050 28
H 283 64 261 45 075-100-125-150-175-200-250-300 2,70 445MU261 * 445MU061 74 445MU061 39
200 various widths of chain. 445MU075 88 445MU075 53
308 64 286 45 075-100-125-150-175-200-250-300 2,81 445MU286 * 445MU081 94 445MU081 59 L 137
N1 445MU085 98 445MU085 63
FIXED POINT 334 64 312 45 075-100-125-150-175-200-250-300 2,92 445MU312 * 445MU095 108 445MU095 73
356 64 334 45 075-100-125-150-175-200-250-300 3,05 445MU334 * 445MU100 113 445MU100 78
445MU107 120 445MU107 85
384 64 362 45 075-100-125-150-175-200-250-300 3,18 445MU362 * For applications with LS2 445MU117 130 445MU117 95 10 35 10
*Complete the code by inserting the value of the radius (R): Ex. 445MU050 0 7 5 and weights not included in 445MU125 138 445MU125 103
445MU136 149 445MU136 114
the area of the diagram 445MU150 163 445MU150 128
For sliding applications, Length of chain (L) R H N M N1 M1 445MU175 188 445MU175 153 6,5 12
technical data can slightly showing self-supporting 445MU200 213 445MU200 178 F
change according to fre- Half travel distance ( LS ) mm mm mm mm mm mm
capacity, verify the possible 445MU211 224 445MU211 189
quency, added weight and
2 075 214 180 370 225 465 445MU225 238 445MU225 203
plus length of curve (M) or (M1) use of support rollers (see 445MU252 265 445MU252 230
environment. 100 264 200 450 340 740 445MU261 274 445MU261 239
125 314 225 530 460 1020 page 30). 445MU286 299 445MU286 264
L= LS + M or M1
445MU312 325 445MU312 290
150 364 250 605 580 1300 445MU334 347 445MU334 312
! 2
SLIDING VERSION 445MU362 375 445MU362 340 Bright Zinc Plated Steel
to be ordered with pivoting 175 414 275 685 700 1575
end brackets set 200 464 300 765 820 1855 Type Part Numbers
250 564 350 920 1055 2410 Nylon Type Nylon Type
Complete Set Assembled
300 664 400 1080 1295 2970 Part Numbers Part Numbers A445M *KM **
Complete Set Assembled Complete Set Assembled Complete Set Unassembled
AN445M *KM AN445KM **** A445M *K **
Complete Set Unassembled Complete Set Unassembled
AN445M *K AN445K **** Tiewrap Clamp
Part Numbers
Tiewrap Clamp Tiewrap Clamp Complete Set Assembled
Part Numbers Part Numbers CFC445M *KM
Complete Set Assembled Complete Set Assembled Complete Set Unassembled
CFC445M *KM SFCT445 *KM CFC445M *K
Complete Set Unassembled Complete Set Unassembled * Inner width (C)
CFC445M *K SFCT445 *K ** 1=Pos.1; 2=Pos.2; 3=Pos.3
74 ****1=Pos.1; 2=Pos.2; 3=Pos.3 *** Available on request in stainless steel 75
5=Pos.5; 6=Pos.6
®
660A
Nylon Cable Chain
with opening frames
Inner height (D) 37 mm A Self-Supporting End Brackets
Separator Capacity Diagram The end brackets set allows the two ends of the chain to be attached to the
Double share Sideband & Frame C - Unassembled Part.no S306SM
construction with large anti-friction
single-pin. Frames opening from inner - Assembled Part.no S306SMMC
The maximum length of the
self-supporting capacity ( LS
2
)
equipment. Set complete with tiewrap clamps available on request.
Nylon Type Bright Zinc Plated Steel
660A
Nylon Cable Chain
radius. As standard the chain comes Strong-hold separator in relationship to the weight with opening frames
for C > 200 mm Type***
with frames every second link, on of the cables and hoses
- Unassembled Part.no S660AH contained per linear metre.
request with frames every link.
5 37 55 3
- Assembled Part.no S660AHMC
Vertical and horizontal modular
Pin
separator system is available.
Part.no PG660 15
13
10
9
3 Acceleration 30 m/s2
For higher requirements please consult our
100
106
55
55
75
81
37
37
100-150-200-250
100-150-200-250
1,59
1,61
660A075
660A081
*
*
2,5
2
1,5
Fig. A
The chain can be fixed frontally,
inner or outer radius. (Fig A)
See end brackets mounting
Fig. B
Chain fixed outside the radius. (Fig B)
See end brackets mounting
variations page 31.
Separation System
To choose the separators see
3
technical dept. 110 55 85 37 100-150-200-250 1,63 660A085 * 1 variations page 31. page 196
120 55 95 37 100-150-200-250 1,66 660A095 * 0 0,5 1 1,5 2 2,5 3
L 59,5 114
L
125 55 100 37 100-150-200-250 1,66 660A100 * LS Max unsupported length
LS N 2
20
LS 132 55 107 37 100-150-200-250 1,69 660A107 * 15
20 How to open the cover.
2 142 55 117 37 100-150-200-250 1,71 660A117 *
R LS 17 10
150 55 125 37 100-150-200-250 1,76 660A125 * 10 32 10
LS ø5.5
50 M H 161 55 136 37 100-150-200-250 1,80 660A136 * 2
175 55 150 37 100-150-200-250 1,84 660A150 *
6.5 12
200 55 175 37 100-150-200-250 1,93 660A175 * F F
225 55 200 37 100-150-200-250 2,02 660A200 *
LS
236 55 211 37 100-150-200-250 2,06 660A211 *
MOVING POINT LS The red marking in the Chain F Chain F
2 250 55 225 37 100-150-200-250 2,11 660A225 *
M1 R
277 55 252 37 100-150-200-250 2,21 660A252 * diagram area considers the Type mm Type mm
H 286 55 261 37 100-150-200-250 2,24 660A261 * difference of weight between 660A050 61 660A050 38
200 660A061 72 660A061 49
311 55 286 37 100-150-200-250 2,38 660A286 * various widths of chains 660A075 86 660A075 63
N1 337 55 312 37 100-150-200-250 2,43 660A312 * 660A081 92 660A081 69
FIXED POINT assembled with nylon frames 660A085 96 660A085 73
359 55 334 37 100-150-200-250 2,52 660A334 * 660A095 106 660A095 83
every second pitch. 660A100 111 660A100 88
387 55 362 37 100-150-200-250 2,61 660A362 *
660A107 118 660A107 95
For sliding applications,
*Complete the code by inserting the value of the radius (R): Ex. 660A050 1 5 0 For applications with LS2
660A117 128 660A117 105
technical data can slightly 660A125 136 660A125 113
Chain equipped with nylon frame every pitch: complete the code by inserting the letter D. and weights not included in 660A136 147 660A136 124
change according to fre-
Ex. 660A050150 D 660A150 161 660A150 138
quency, added weight and the area of the diagram 660A175 186 660A175 163
environment. showing self-supporting 660A200 211 660A200 188
Length of chain (L) R H N M N1 M1 660A211 222 660A211 199
capacity, verify the possible
Half travel distance ( LS ) mm mm mm mm mm mm 660A225 236 660A225 213
!
SLIDING VERSION 2 use of support rollers (see 660A252 263 660A252 240
to be ordered with pivoting 100 255 180 415 205 470 660A261 272 660A261 249
end brackets set
plus length of curve (M) or (M1) 150 355 230 575 360 855 page 30). 660A286 297 660A286 274
660A312 323 660A312 300
200 455 280 730 535 1290 660A334 345 660A334 333 Suitable to long travel distance
L= LS + M or M1 250 555 330 885 705 1730
660A362 373 660A362 350 in frame every pitch version.
2 To choose the guide channel
Nylon Type Bright Zinc Plated Steel see page 178
Part Numbers Type Part Numbers
Complete Set Assembled Complete Set Assembled
Chain End Brackets Chain End Brackets
Special tool to remove the
Type Set Type Set connecting pivots:
660A... AN660AKM 660A... A660AKM ** Part Number PZ010.
770A
Nylon Cable Chain
with opening frames
Inner height (D) 60 mm A Separator Self-Supporting End Brackets
Double share Sideband & Frame Capacity Diagram The end brackets set allows the two ends of the chain to be
C - Unassembled Part.no S770A
construction with large anti-friction
single-pin. Frames opening from inner
- Assembled
Strong-hold separator
Part.no S770AMC The maximum length of the
self-supporting capacity ( LS
2
)
attached to the equipment. Set complete with tiewrap clamps
available on request.
770A
Nylon Cable Chain
radius. As standard the chain comes 7 60 78 5
for C > 200 mm in relationship to the weight Nylon Type with opening frames
with frames every second link, on - Unassembled Part.no S770AH of the cables and hoses
request with frames every link. - Assembled Part.no S770AHMC contained per linear metre.
Vertical and horizontal modular Pin
separator system is available. Part.no PG770
20
15
10
Technical characteristics A B C D R Weight/m Chain 8
7
when self-supported mm mm mm mm mm kg Part Number 6
3 3
3
2,5
Acceleration 30 m/s2 105 78 70 60 130-150-200-250-300 2,31 770A070 * 2
Fig. A Separation System
111 78 76 60 130-150-200-250-300 2,32 770A076 * 1,5
The chain can be fixed frontally, inner or outer radius. (Fig A) To choose the separators see
For higher requirements please consult our See end brackets mounting variations page 31. page. 196
technical dept. 115 78 80 60 130-150-200-250-300 2,34 770A080 * 1
125 78 90 60 130-150-200-250-300 2,36 770A090 * 0 1 2 3 4 L 79
LS N 130 78 95 60 130-150-200-250-300 2,36 770A095 * LS Max unsupported length 26,5
LS 137 78 102 60 130-150-200-250-300 2,38 770A102 * 2 25
2 26,5
R 147 78 112 60 130-150-200-250-300 2,39 770A112 * 20 15 How to open the cover.
LS
155 78 120 60 130-150-200-250-300 2,43 770A120 * ø6.2
70 M H LS
166 78 131 60 130-150-200-250-300 2,46 770A131 * 2
180 78 145 60 130-150-200-250-300 2,49 770A145 *
F
205 78 170 60 130-150-200-250-300 2,55 770A170 *
LS
230 78 195 60 130-150-200-250-300 2,62 770A195 *
MOVING POINT LS 241 78 206 60 130-150-200-250-300 2,65 770A206 *
2 M1 R Chain F
255 78 220 60 130-150-200-250-300 2,68 770A220 * The red marking in the
H 282 78 247 60 130-150-200-250-300 2,75 770A247 * diagram area considers the Type mm
250 770A045 61
291 78 256 60 130-150-200-250-300 2,77 770A256 * difference of weight between 770A056 72
FIXED POINT N1 316 78 281 60 130-150-200-250-300 2,82 770A281 * various widths of chains 770A070 86
770A076 92
342 78 307 60 130-150-200-250-300 2,88 770A307 * assembled with nylon frames 770A080 96
364 78 329 60 130-150-200-250-300 2,94 770A329 * 770A090 106
every second pitch. 770A095 111
392 78 357 60 130-150-200-250-300 3,01 770A357 * 770A102 118
For sliding applications, *Complete the code by inserting the value of the radius (R): Ex. 770A045 1 5 0 For applications with LS2
770A112
770A120
128
136
technical data can slightly Chain equipped with nylon frame every pitch: complete the code by inserting the letter D. and weights not included in 770A131 147
change according to fre- Ex. 770A045150 D 770A145 161
quency, added weight and
the area of the diagram 770A170 186
770A195 211
environment. showing self-supporting 770A206 222
Length of chain (L) R H N M N1 M1 capacity, verify the possible 770A220 236
770A247 263
Half travel distance ( LS ) mm mm mm mm mm mm use of support rollers (see
!
SLIDING VERSION 770A256 272
to be ordered with pivoting 2 130 338 240 555 305 685 page 30). 770A281 297
plus length of curve (M) or (M1) 770A307 323
end brackets set 150 378 260 615 340 785 770A329 345 Suitable to long travel distance
770A357 373 in frame every pitch version.
200 478 310 770 515 1220
L= LS + M or M1 250 578 365 930 690 1660 Nylon Type To choose the guide channel
2 see page 178
300 678 410 1085 865 2095 Part Numbers
Complete Set Assembled
Chain End Brackets Special tool to remove the
Type Set connecting pivots:
770A... AN770AKM Part Number PZ010.
475MU
Nylon Cable Chain with opening frames
Inner height (D) 75,5 mm A Separator Self-Supporting Bright Zinc Plated Steel End Brackets***
Capacity Diagram The end brackets set allows the two ends of the chain to
C
Chain with side-bands and holding pin. - Sfuso Part.no S309S/3178
Openable outside / inside radius - Montato* Part.no S309S/3178MCI The maximum length of the be attached to the equipment. Set complete with tiewrap 475MU
mounted on all the links.
- Montato** Part.no S309S/3178 MCE self-supporting capacity ( LS
2
) clamps available on request. Nylon Cable Chain
Strong-hold separator in relationship to the weight with opening frames
Internal separation available per C > 250 mm
and customizable. 75,5 100,5 6 - Sfuso Part.no S309HOFL of the cables and hoses
5 - Montato Part.no S309HOFLMC contained per linear metre.
S309HOFL
Pin Part.no PG475
* for chain opening outer radius 40
** for chain opening inner radius 30
20
3 3
4
Acceleration 40 m/s2
3 variations page 31.
157 100,5 119 75,5 150-180-200-250-300-350-400 3,85 475MU119 * Separation System
2
164 100,5 126 75,5 150-180-200-250-300-350-400 3,90 475MU126 * To choose the separators see
1,5
For higher requirements please consult our L 105 page. 196
technical dept. 187 100,5 149 75,5 150-180-200-250-300-350-400 3,95 475MU149 * 1
0 1 2 3 4 5 6 7
227 100,5 189 75,5 150-180-200-250-300-350-400 4,05 475MU189 *
LS Max unsupported length
262 100,5 224 75,5 150-180-200-250-300-350-400 4,15 475MU224 *
LS N 2
70
288 100,5 250 75,5 150-180-200-250-300-350-400 4,25 475MU250 * How to open the cover.
LS 15 40 15
2 312 100,5 274 75,5 150-180-200-250-300-350-400 4,30 475MU274 *
R 22
338 100,5 300 75,5 150-180-200-250-300-350-400 4,37 475MU300 *
LS
362 100,5 324 75,5 150-180-200-250-300-350-400 4,45 475MU324 * 11
105 M H LS F A
388 100,5 350 75,5 150-180-200-250-300-350-400 4,55 475MU350 * 2
412 100,5 374 75,5 150-180-200-250-300-350-400 4,60 475MU374 * 40
467 100,5 429 75,5 150-180-200-250-300-350-400 4,80 475MU429 *
Length of chain (L) 536 100,5 498 75,5 150-180-200-250-300-350-400 5,00 475MU498 *
*Complete the code by inserting the value of the radius (R): Ex. 475MU119 1 5 0
Half travel distance ( LS ) Chain equipped with nylon frame every pitch: complete the code by inserting the letter D. The red marking in the
2 Chain F
Ex. 475MU119150 D
plus length of curve (M) diagram area considers the Type mm
difference of weight between 475MU074 35
L= LS + M various widths of chains 475MU094 55
2 475MU119 80
assembled with nylon frames 475MU126 87
R H N M every second pitch. 475MU149 110
475MU189 150
mm mm mm mm For applications with LS 475MU224 185
2 475MU250 211
150 400,5 310 690 and weights not included in 475MU274 235
180 460,5 335 775
the area of the diagram 475MU300 261
200 500,5 355 840 475MU324 285
showing self-supporting 475MU350 311
250 600,5 405 995
capacity, verify the possible 475MU374 335
300 700,5 460 1155 475MU429 390
350 800,5 505 1310
use of support rollers (see
475MU498 459
400 900,5 560 1470 page 30).
Bright Zinc Plated Steel
Type Part Numbers
Complete Set Assembled
Chain End Brackets
Type Set
475... A475M]]]*KM **
Complete Set Unassembled
Chain End Brackets
Type Set
475... A475M]]]*K **
Tiewrap Clamp
Assembl. CFC475M *KM For further information please
Unassembl.CFC475M *K consult Brevetti Stendalto’s
Technical Office
* Inner width (C)
80 Version with frames mounted on every pitch. ** 1=Pos.1; 2=Pos.2; 3=Pos.3 81
*** Available on request in stainless steel
®
Guide Channel
305-355-435MU
Special Channel guide allows the use of Guide Empty Section 305-355-435
the chain for long travel distance. Section A-A
Available in galvanised steel and, on Part Number
request, in stainless steel CS305…
How to order
Chain part number 305008
Guide channel
A1=A+4 part number CS305008
Single Chain Application
96.5
CS355…
LS How to order
LS LS
2 2 Chain part number 355045
20
R A2=A+87
Guide channel
A B part number CS355045
CS435…
How to order
A B
3 3
Chain part number 435050060
GUIDE EMPTY SECTION GUIDE WITH SLIDING PLATE SECTION Guide Sliding Plate Section 305 Guide channel
Section B-B part number CS435050
Part Number
CA305…
How to order
Double Chain Application Chain part number 305008
Guide channel
A1=A+4 part number CA305008
LS
LS LS
96.5
2 2
30
R
20
A A A2=A+87
A A
GUIDE EMPTY SECTION
Guide Sliding Plate Section 355
Section B-B
Part Number
CA355…
How to order
Chain part number 355045
Guide channel
A1=A+4 part number CA355045
Channel guide is available in kit
96.5
composed by:
side walls 2 m standard length
45
joining plates
20
fixing screws A2=A+87
FIXING PLATE
50
SIDE WALL
20
82 83
Wide range of cross pieces
available in the following types:
Nylon Cable Chains Open and close, with a
“Snap-Fit” action
Heavy Series Aluminium Rods
With Pre-Drilled Holes
85
®
H45SC
Nylon cable chain with opening frames
Pin
S45HOFL
Part.no PNH45RS
50
40
* for chain opening outer radius 30
** for chain opening inner radius
20
2
Fig. A
The chain can be fixed frontally, inner and outer radius (Fig A)
POS. A
3
Acceleration 40 m/s2 163 70 125 45 075-100-125-150-175-200-250-300 2,44 H45SC125 *
105
188 70 150 45 075-100-125-150-175-200-250-300 2,52 H45SC150 * 1
For higher requirements please consult 75 79
213 70 175 45 075-100-125-150-175-200-250-300 2,60 H45SC175 * 0 1 2 3 4 5 6 7 8 F1
our technical dept. Max unsupported LS LSa
238 70 200 45 075-100-125-150-175-200-250-300 2,67 H45SC200 * e 24 24
length 2 2
22 22
263 70 225 45 075-100-125-150-175-200-250-300 2,75 H45SC225 * Separation System
For sliding applications, characteristics 24 24
techniques may vary depending on the
288 70 250 45 075-100-125-150-175-200-250-300 2,83 H45SC250 * page. 196
frequency, added weight and work environment. 313 70 275 45 075-100-125-150-175-200-250-300 2,91 H45SC275 * LS Ø9x6,5 21,5 23,5
338 70 300 45 075-100-125-150-175-200-250-300 2,99 H45SC300 * LS
388 70 350 45 075-100-125-150-175-200-250-300 3,14 H45SC350 * 2
438 70 400 45 075-100-125-150-175-200-250-300 3,30 H45SC400 * 32
F F1
*Complete the code by inserting the value of the radius (R): Ex. H45SC100 2 5 0 12 6,5
Chain equipped with nylon frame every picth: complete the code by inserting the letter D. Ex. H45SC100250 D
86 Pos. B SFCTH45*K 87
* Inner Width C
®
H57SC
Nylon cable chain with opening frames
Pin
S57HOFL
Part.no PNH57RS
C C 100
A B C D R Weight/m Chain
20 H57B
Technical Characteristics On request can be supplied
A
5 76,5 114
H80SC C
66
radius. As standard the chain comes Nylon chain with
Strong-hold Separator in admissible sagging ( LS )
with frames every link. 8 2 Nylon Type opening frame with
8 Vertical and80,5 114
horizontal modular 8 D B
80,5 114 for C > 250 mm in relationship to the a snap
separator system is available. - Unassembled Part.no SH80HOF6L weight of the cables and hoses
- Assembled 5
Part.no SH80HOF6LMC 76,5 114 contained per linear metre. POS. B
60
40
D B114 6
- Assembled** Part.no S80MCE
350 814 527 1340 1525 3445
400 80,5
914114 577 1500 1760 4000 88 80,5 Strong-hold Separator8 80,5 114 8 80,5 11411 F F1 How to open
for C > 250 mm 11 F11 F1F F1 the frame
500 1114 677 1815 2235 5115 *If the chain is in the
- Unassembled Part.no S80HOFL
600 1314 777 2125 2705 6225 S80HOFL ADMISSIBLE SAGGING Nylon Type
- Assembled Part.no S80HOFLMC
C Pin area (between GREEN and 23
23
50
23
50 29,5
5029,5 29,5 Part Numbers
LS N
Part.no PNH80RS RED area) version with
Chain F F1 Assembled
LS
2 * for chain opening outer radius frames on every link is
Type mm mm Chain End Brackets
R ** for chain opening inner radius
H80SA necessary. H80SC150 124 177,5 Type set How to release
120 M H Version with openable frame by both sides H80SC175 149 202,5 H80SC ANH80KM]** the pin junction
A B C D R Weight/m Chain The area in the diagram H80SC200 174 227,5
A AH80SC225 Unassembled
199 252,5
mm mm mm mm mm kg C
Part Number considers the difference CH80SC250 Chain End Brackets
129 114 74 80,5 200-250-300-350-400-500-600 5,99 H80SA074 ]]]* of weight between various
224 277,5
Type set
LS
149 114 94 80,5 200-250-300-350-400-500-600 6,10 H80SA094 ]]]* widths of chain with nylon
H80SC275 249 302,5
H80SC ANH80K*
MOVING 200-250-300-350-400-500-600 6,22 H80SA119 ]]]*
LS
2 H80SC300 274 327,5
POINT
M1 R 174 114 119 80,5 frame every second link. 8 H80SC325
200-250-300-350-400-500-600 6,23 H80SA1268]]]* 77 114 77 299
114 352,5
181 114 126 80,5 Tiewrap Clamp 10 mm
200-250-300-350-400-500-600 8,22 H80SA429 ]]]*
H H80SC350 324 377,5
300 484 114 429 80,5
200-250-300-350-400-500-600 8,77 H80SA498 ]]]*
Red for self-supporting H80SC375 349 402,5
FIXED POINT 120 N1 553 114 498 80,5 Complete Set Assembled
chain, green for chain in Mounting Tiewrap Clamp
*Complete the code by inserting the value of the radius (R): Ex. H80SA119 2 5 0
admissible sagging. Position set
Pos. A SFCTH80*KMA
For applications with Pos. B SFCTH80*KM
Length of chain (L)
and weights not
included in the diagram of Half travel distance ( LS ) Complete Set Unassembled Suitable to long travel distance
2 Mounting Tiewrap Clamp with covers on all the pitches.
self-supporting capacity, verify plus length of curve (M) or (M1) Position set
the possible use of support Pos. A SFCTH80*KA
rollers (see page 30). L= LS + M or M1 Pos. B SFCTH80*K
For further informations please
consult Brevetti Stendalto’s
2
* Inner Width C Technical Office
Version with frames mounted on every pitch ** 1=Pos.1; 2=Pos.2; 3=Pos.3
90 *** For 074 and 094 shares 91
assembly is only on position B
®
H110SC
Nylon Chain with opening
frame with a snap
Inner height (D) 115 mm AA Self-Supporting Bright Zinc Plated Steel End Brackets
CC Separator
Sideband construction with quickly - Unassembled Part.no S110F3 Capacity Diagram The end brackets set allows the two ends of the chain to be
removable pin. Frames openable from
either side on both inner and outer - Assembled*
- Assembled**
Part.no S110F3MCI
Part.no S110F3MCE
The maximum length of the
self-supporting capacity or
attached to the equipment. Set complete with tiewrap clamps
available on request.
H110SC
Nylon chain with
radius. As standard the chain comes
with frames every link. Strong - Hold Separator for C > 250 mm in admissible sagging ( LS
2
) Tiewrap
Clamp opening frame with
Vertical and horizontal modular 66 115155
155
155 10
115155 10 - Unassembled Part.no S110HOFL in relationship to the a snap
separator system is available. - Assembled Part.no S110HOFLMC weight of the cables and
Pin hoses contained per linear
S110HOFL
Part.no PNH110RS metre.
* for chain opening outer radius
** for chain opening inner radius 200
150
100
60
110SC150 ]]]*
78,5
Length of chain (L)
110SC275 ]]]*
LS N Max unsupported LS LSa
and
330 155 275 115 200-250-300-400-500-600-700-750 9,27 length (m) 2 2
Half travel distance ( LS )
110SC300 ]]]*
LS
2 355 155 300 115 200-250-300-400-500-600-700-750 9,38 2
110SC325 ]]]*
R
380 155 325 115 200-250-300-400-500-600-700-750 9,53 LS
plus length of curve (M) or (M1)
35
160 M H 405 155 350 115 200-250-300-400-500-600-700-750 9,70 110SC350 ]]]* LS
L= LS + M or M1 11
110SC375 ]]]*
2
430 155 375 115 200-250-300-400-500-600-700-750 9,80 2 F1 F2 Separation System
*Complete the code by inserting the value of the radius (R): Ex. 110SC350 2 5 0 page. 196
LS
MOVING A
LS
POINT 60 20
2
M1 R C Separator 20
How to open
H
- Unassembled Part.no S110F3/8687 100 the frame
350
- Assembled* Part.no S110F3/8687MCI
FIXED POINT 160 N1
- Assembled** Part.no S110F3/8687MCE *If the chain is in the Chain F1 Chain F2
6 115 155 10 Strong - Hold Separator for C > 250 mm ADMISSIBLE SAGGING Type mm Type mm
For sliding applications, characteristics - Unassembled Part.no S110HOFL/8688 area (between GREEN and 110SC150 120 110SC150 112
techniques may vary depending on the 110SC175 145 110SC175 137
frequency, added weight and work environment. - Assembled Part.no S110HOFL/8688MC RED area) version with 110SC200 170 110SC200 162
110SC225 195 110SC225 187
Pin Part.no PNH110RS frames on every link is 110SC250 220 110SC250 212 How to release
R H N M N1 M1 * for chain opening outer radius necessary. 110SC275 245 110SC275 237 the pin junction
110SC300 270 110SC300 262
mm mm mm mm mm mm SA ** for chain opening inner radius 110SC325 295 110SC325 287
200 557 418 950 855 1820 110SC350 320 110SC350 312
Version with openable frame by both sides The area in the diagram 110SC375 344 110SC375 336
250 657 468 1110 1095 2375 110SA429 399 110SA429 391
A B C D R Weight/m Chain considers the difference 110SA498 468 110SA498 460
300 757 518 1265 1335 2935
mm mm mm mm mm kg Part Number of weight between various Special widths F= C-85 Special widths F= C-93
400 957 618 1580 1805 4045
500 1157 718 1895 2280 5160 484 155 429 115 200-250-300-400-500-600-700-750 9,85 110SA429 ]]]* widths of chain with nylon
110SA498 ]]]* frame every second link. 10 mm
600 1357 818 2205 2750 6270 553 155 498 115 200-250-300-400-500-600-700-750 10,2 Bright Zinc Plated Steel Tiewrap Clamp kit mounted
700 1557 918 2520 3225 7385 *Complete the code by inserting the value of the radius (R): Ex. 110SC429 2 5 0 Type Part Number on female attachment
750 1657 968 2680 3460 7940 Red for self-supporting
Complete Set Assembled Part Number
chain, green for chain in Chain End Brackets Assembled SFCT110 *FKM
admissible sagging. type kit Unassembled SFCT110 *FK
110SC A110SC KM ** * Inner width (C)
For applications with 110SA A110SA KM **
and weights not Complete Set Unassembled Tiewrap Clamp kit mounted Suitable to long travel distance
included in the diagram of Chain End Brackets on male attachment with covers on all the pitches.
type kit
self-supporting capacity, verify Part Number
110SC A110SC K **
the possible use of support Assembled SFCT110 *MKM
110SA A110SA K ** For further informations please
rollers (see page 30). Available on request in stainless steel. Unassembled SFCT110 *MK
consult Brevetti Stendalto’s
** 1=Pos.1; 2=Pos.2; 3=Pos.3 * Inner width (C) Technical Office
See mounting variations page 31
92 Version with nylonframes mounted on every pitch 93
®
H110T
Nylon chain with aluminium draw plates
Inner height (D) 112,5 mm A Separator Self-Supporting Bright Zinc Plated Steel
Sideband construction with quickly C - Unassembled Part.no S310TCF9 Capacity Diagram End Bracket***
removable pin.
Alu-draw frames are un-screwable - Assembled
Pin
Part.no S310TCF9MC The maximum length of the
self-supporting capacity or
The end brackets set allows the two ends of the chain to be attached to
the equipment. Set complete with tiewrap clamps available on request.
H110T
from inner and outer radius. Nylon chain with
As standard the chain comes with Part.no PNH110RS
in admissible sagging ( LS 2
) aluminium draw
frames every link. 10 112,5 155 in relationship to the Bright Zinc Plated Steel Type plates
Vertical separators system available. weight of the cables and hoses Tiewrap
contained per linear metre. Clamp
200
150
78,5
LS
R H N M N1 M1 LS
LS LS N 2
mm mm mm mm mm mm
MOVING
LS LS
2 35
POINT
M1 R 2 200 557 418 950 855 1820
R
250 657 468 1110 1095 2375 11
350
H F1 F2
160 H 300 757 518 1265 1335 2935
FIXED POINT
M
160 N1 400 957 618 1580 1805 4045
500 1157 718 1895 2280 5160
Length of chain (L)
600 1357 818 2205 2750 6270
*If the chain is in the 20 60 20
700 1557 918 2520 3225 7385 100
Half travel distance ( LS ) ADMISSIBLE SAGGING
750 1657 968 2680 3460 7940
2 area (between GREEN and
plus length of curve (M) or (M1) RED area) version with Chain F1 Catena F2
frames on every link is
L= LS + M or M1 Type mm Tipo mm How to release
2 necessary. 110T200 170 110T200 162 the pin junction
110T300 270 110T300 262
The area in the diagram 110T400 370 110T400 362
considers the difference 110T500 470 110T500 462
of weight between various 110T600 570 110T600 562
widths of chain with nylon Special widths F=C-30 Special widths F=C-38
CH.10 mm
frame every second link.
Bright Zinc Plated Steel Tiewrap Clamp kit mounted
Red for self-supporting Type Part Number on female attachment
chain, green for chain in Complete Set assembled Part Number
admissible sagging. Chain End Brackets Assembled SFCT110 *FKM
Type Set Unassembled SFCT110 *FK
For applications with 110T... A110T KM ** * Inner width (C)
and weights not Complete Set Unassembled
included in the diagram of
Tiewrap Clamp kit mounted Suitable to long travel distance
Chain End Brackets
self-supporting capacity, verify
on male attachment with covers on all the pitches.
Type Set
the possible use of support Part Number
110T... A110T K ** For further informations please
rollers (see page 30). ** 1= Pos.1; 2= Pos.2; 3= Pos.3 Assembled SFCT110 *MKM
consult Brevetti Stendalto’s
*** On request stainless steel Unassembled SFCT110 *MK Technical Office
Version with Alu-draw mounted on every pitch * Inner width (C)
94 95
C
5 37 55
306SU
Nylon Cable Chain
with opening frames
AA Self-Supporting End Brackets
Inner height (D) 37 mm Separator Capacity Diagram The end brackets set allows the two ends of the chain to be attached to
Strong double share Sideband & Frame C - Unassembled Part.no S306SM
construction with large anti-friction - Assembled*
Strong-hold separator
Part.no S306SMMC
The maximum length of the
self-supporting capacity ( LS
2
)
the equipment. Set complete with tiewrap clamps available on request.
Nylon Type Nylon Type
306SU
triple-pin. Frames opening from inner Nylon Cable Chain
for C > 250 mm in relationship to the weight with opening frames
and outer radius.
5 5 D B 55
37 5 - Unassembled Part.no S660AH of the cables and hoses
As standard the chain comes with - Assembled* Part.no S660AHMCI contained per linear metre.
frames every second link, on request - Assembled** Part.no S660AHMCE
with frames every link. Pin Part.no PG307
30
* for chain opening outer radius
Vertical and horizontal modular C
** for chain opening inner radius 20
3 3
3
Acceleration 10 m/s2 inner or outer radius. (Fig A) See end brackets mounting
104 55 68 37 075-107-150-200-250-300 1,68 306SU068 * 2
variations page 31. Separation System
1,5
110 55 74 37 075-107-150-200-250-300 1,70 306SU074 * To choose the separators see
For higher requirements please consult our 1 page. 196
technical dept. 114 55 78 37 075-107-150-200-250-300 1,72 306SU078 * 0 1 2 3
L 68 L 85,5
124 55 88 37 075-107-150-200-250-300 1,74 306SU088 * LS Max unsupported length 16.5
2 22
129 55 93 37 075-107-150-200-250-300 1,74 306SU093 *
LS N 16.5
136 55 100 37 075-107-150-200-250-300 1,76 306SU100 *
LS 20 12 52
146 55 110 37 075-107-150-200-250-300 1,77 306SU110 * LS 10 32 10
2 R 154 55 118 37 075-107-150-200-250-300 1,82 306SU118 * LS
65 165 55 129 37 075-107-150-200-250-300 1,85 306SU129 * 2
ø6.5
M H 179 55 143 37 075-107-150-200-250-300 1,89 306SU143 * ø6.5 F A F A
204 55 168 37 075-107-150-200-250-300 1,96 306SU168 * Bright Zinc Plated
229 55 193 37 075-107-150-200-250-300 2,04 306SU193 * 12
Steel Type***
Length of chain (L) 240 55 204 37 075-107-150-200-250-300 2,07 306SU204 * 6.5
254 55 218 37 075-107-150-200-250-300 2,11 306SU218 *
Half travel distance ( LS ) Chain F Chain F
2 281 55 245 37 075-107-150-200-250-300 2,19 306SU245 * The red marking in the
plus length of curve (M) 290 55 254 37 075-107-150-200-250-300 2,22 306SU254 * Type mm Type mm
diagram area considers the 306SU043 61 306SU043 36
315 55 279 37 075-107-150-200-250-300 2,29 306SU279 * difference of weight between 306SU054 72 306SU054 47
L= LS + M 341 55 305 37 075-107-150-200-250-300 2,34 306SU305 * 306SU068 86 306SU068 61 L 63.5
2 various widths of chains 306SU074 92 306SU074 67
363 55 327 37 075-107-150-200-250-300 2,41 306SU327 * 306SU078 96 306SU078 71
assembled with nylon frames 306SU088 106 306SU088 81
391 55 355 37 075-107-150-200-250-300 2,49 306SU355 * 306SU093 111 306SU093 86
R H N M every second pitch. 306SU100 118 306SU100 93 102
*Complete the code by inserting the value of the radius (R): Ex. 306SU110 1 5 0 306SU110 128 306SU110 103 10 32 10
mm mm mm mm For applications with LS 306SU118 136 306SU118 111
Chain equipped with nylon frame every pitch: complete the code by inserting the letter D. 2
075 208 170 370 Ex. 306SU110150 D and weights not included in
306SU129 147 306SU129 122
12
306SU143 161 306SU143 136 6.5
107 272 205 470 306SU168 186 306SU168 161 FA
the area of the diagram 306SU193 211 306SU193 186
150 358 245 605
showing self-supporting 306SU204 222 306SU204 197 30
200 458 295 760 306SU218 236 306SU218 211
capacity, verify the possible 306SU245 263 306SU245 238
250 558 345 920 306SU254 272 306SU254 247
300 658 395 1075 use of support rollers (see 306SU279 297 306SU279 272
page 30). 306SU305 323 306SU305 298
306SU327 345 306SU327 320 Bright Zinc Plated Steel
306SU355 373 306SU355 348
Type Part Numbers
Nylon Type Nylon Type Complete Set Assembled
Part Numbers Part Numbers Chain End Brackets
Type Set
Complete Set Assembled Complete Set Assembled 306SU... A306SKM **
Chain End Brackets Chain End Brackets
Complete Set Unassembled
Type Set Type Set Chain End Brackets
306SU... AN306KM 306SU... ANL306KM ** Type Set
Complete Set Unassembled Complete Set Unassembled 306SU... A306SK **
Chain End Brackets Chain End Brackets Tiewrap Clamp
Type Set Type Set Assembl. SFCT306S *KM
306SU... AN306K 306SU... ANL306K ** Unassembl. SFCT306S *K
Tiewrap Clamp Tiewrap Clamp * Inner width (C)
Assembl. CFC306S *KM Assembl. SFCTL306]]]*KM ** 1=Pos.1; 2=Pos.2; 3=Pos.3
*** Available on request in stainless steel
96 Version with frames mounted on every pitch. Unassembl. CFC306S *K Unassembl. SFCTL306S]]]*K 97
A
C
®
30 55
306B
Nylon Cable Chain
with un-screwable aluminium rods
Inner height (D) 30 mm A Separator Self-Supporting End Brackets
Strong double share Sideband & C - Unassembled Part.no S2000F Capacity Diagram The end brackets set allows the two ends of the chain to be
Frame construction with large
anti-friction triple-pin. Alu-rod frames 30 55
- Assembled
Pin
Part.no S2000FMC The maximum length of the
self-supporting capacity ( LS )
attached to the equipment. Set complete with tiewrap clamps
available on request.
306B
3,5
2 Nylon Cable Chain
are un-screwable from inner and outer Part.no PG307
in relationship to the weight Nylon Type Nylon Type with un-screwable
radius. As standard the chain comes of the cables and hoses aluminium rods
with frames every second link, on contained per linear metre.
request with frames every link.
Vertical and horizontal separator sys-
30
tems are available. 20
15
Technical characteristics A B C D R Weight/m Chain
10
3 Acceleration 10 m/s2
For higher requirements please consult our
190
240
55
55
150
200
30
30
075-107-150-200-250-300
075-107-150-200-250-300
1,80
1,90
306B150 *
306B200 *
3
2
1,5
Fig. A
The chain can be fixed frontally,
Fig. B
Chain fixed outside the radius. (Fig B)
3
technical dept. 290 55 250 30 075-107-150-200-250-300 2,00 306B250 * 1 inner or outer radius. (Fig A) See end brackets mounting
340 55 300 30 075-107-150-200-250-300 2,15 306B300 * 0 1 2 3 variations page 31.
LS Max unsupported length
C+40 55 ..... 30 075-107-150-200-250-300 306B ** 2
*Complete the code by inserting the value of the radius (R): Ex. 306B075 1 Supplementary movable
Where: 1=075; 2=107; 3=150; 4=200; 5=250; 6=300. L 68 separators.
LS L 85,5
**Complete the code by inserting the value of the quote C and the radius (R): Ex. 306B 1 2 3 1
LS 16.5
Chain equipped with aluminium rods every pitch: complete the code by inserting the letter D. 2 22
Ex. 306B0751 D 16.5 Bright Zinc Plated
R H N M 20 12 52 Steel Type***
LS N 10 32 10
LS mm mm mm mm
2 R 075 208 170 370
ø6.5
107 272 205 470
65 The red marking in the ø6.5 F A F A
M H 150 358 245 605
200 458 295 760 diagram area considers the
12 L 63.5
250 558 345 920 difference of weight between 6.5
300 658 395 1075 various widths of chains
Length of chain (L)
assembled with rods every 102
Half travel distance ( LS ) second pitch.
Chain F Chain F
10 32 10
2 Type mm Type mm
plus length of curve (M) For applications with LS 306B075 96 306B075 71 12
2 6.5
306B100 121 306B100 96 FA
L= LS + M and weights not included in
2 the area of the diagram 306B150 171 306B150 146 30
showing self-supporting 306B200 221 306B200 196
capacity, verify the possible 306B250 271 306B250 246
use of support rollers (see 306B300 321 306B300 296
page 30).
Special widths F=A-19 Special widths F=A-44 Bright Zinc Plated Steel
Type Part Numbers
Nylon Type Nylon Type Complete Set Assembled
Part Numbers Part Numbers Chain End Brackets
Type Set
Complete Set Assembled Complete Set Assembled
Chain End Brackets 306B... A306KM **
Chain End Brackets
Type Set Complete Set Unassembled
Type Set
306B... AN306KM Chain End Brackets
306B... ANL306KM **
Type Set
Complete Set Unassembled Complete Set Unassembled
Chain End Brackets 306B... A306K **
Chain End Brackets
Type Set Tiewrap Clamp
Type Set
306B... AN306K Assembl. SFCT306B]]]*KM
306B... ANL306K **
Unassembl. SFCT306B]]]*K
Tiewrap Clamp
* Inner width (C)
Assembl. SFCTL306]]]*KM ** 1=Pos.1; 2=Pos.2; 3=Pos.3
Unassembl. SFCTL306B]]]*K *** Available on request in stainless steel
98 Version with Alu-rods on every second pitch. 99
A
C
5 47 65
307SU
Nylon Cable Chain with opening frames
Inner height (D) 47 mm AA Separator Self-Supporting End Brackets
Strong double share Sideband & Frame C - Unassembled Part.no S307S Capacity Diagram The end brackets set allows the two ends of the chain to be attached to
Part.no S307SMCI
construction with large anti-friction
triple-pin. Frames opening from inner
- Assembled*
- Assembled** Part.no S307SMCE
The maximum length of the
self-supporting capacity ( LS )
the equipment. Set complete with tiewrap clamps available on request.
Nylon Type Bright Zinc Plated Steel
307SU
and outer radius. Strong-hold separator 2 Nylon Cable Chain
in relationship to the weight
5 5 D B65
47 5 for C > 250 mm Type*** with opening frames
As standard the chain comes with - Unassembled Part.no S307SH of the cables and hoses
frames every second link, on request - Assembled* Part.no S307SHMCI contained per linear metre.
with frames every link. - Assembled** Part.no S307SHMCE
Vertical and horizontal modular C Pin Part.no PG307
separator system is available. * for chain opening outer radius
** for chain opening inner radius 30
20
Acceleration 40 m/s2 105 65 67 47 075-090-120-140-200-250 1,92 307SU067 * 3 The chain can be fixed frontally, Chain fixed outside the radius. (Fig B) Separation System
inner or outer radius. (Fig A) See end brackets mounting To choose the separators see
For higher requirements please consult our 111 65 73 47 075-090-120-140-200-250 1,94 307SU073 * 2
variations page 31.
1,5 page 196.
technical dept. 115 65 77 47 075-090-120-140-200-250 1,96 307SU077 * L 70 72.5
1
125 65 87 47 075-090-120-140-200-250 1,97 307SU087 * L
0 1 2 3 4
LS Max unsupported length 17.5
130 65 92 47 075-090-120-140-200-250 1,97 307SU092 * 2 30
LS N 137 65 99 47 075-090-120-140-200-250 1,99 307SU099 * 17.5
LS
147 65 109 47 075-090-120-140-200-250 2,00 307SU109 * LS 20 13 114
2 R 155 65 117 47 075-090-120-140-200-250 2,05 307SU117 * LS 14 32 14
166 65 128 47 075-090-120-140-200-250 2,07 307SU128 * 2 How to open the cover.
70 M H 180 65 142 47 075-090-120-140-200-250 2,10 307SU142 * ø6.5 12
ø6.5 6.5
FA FA
205 65 167 47 075-090-120-140-200-250 2,16 307SU167 * 60
230 65 192 47 075-090-120-140-200-250 2,23 307SU192 *
35
Length of chain (L) 241 65 203 47 075-090-120-140-200-250 2,26 307SU203 *
255 65 217 47 075-090-120-140-200-250 2,30 307SU217 * The red marking in the
Half travel distance ( LS )
Chain F Chain F
2 282 65 244 47 075-090-120-140-200-250 2,37 307SU244 * diagram area considers the Type mm Type mm
plus length of curve (M) 291 65 253 47 075-090-120-140-200-250 2,39 307SU253 * difference of weight between 307SU042 61 307SU042 31
307SU053 72 307SU053 42
316 65 278 47 075-090-120-140-200-250 2,47 307SU278 * various widths of chains 307SU067 86 307SU067 56
L= LS + M 342 65 304 47 075-090-120-140-200-250 2,50 307SU304 * assembled with nylon frames 307SU073 92 307SU073 62
2 307SU077 96 307SU077 66
364 65 326 47 075-090-120-140-200-250 2,56 307SU326 * every second pitch. 307SU087 106 307SU087 76
307SU092 111 307SU092 81
392 65 354 47 075-090-120-140-200-250 2,63 307SU354 * 307SU099 118 307SU099 88
R H N M
*Complete the code by inserting the value of the radius (R): Ex. 307SU117 1 4 0
For applications with LS2 307SU109 128 307SU109 98
mm mm mm mm 307SU117 136 307SU117 106
Chain equipped with nylon frame every pitch: complete the code by inserting the letter D. and weights not included in 307SU128 147 307SU128 117
075 219 180 375 Ex. 307SU117140 D the area of the diagram 307SU142 161 307SU142 131
307SU167 186 307SU167 156
090 249 195 425 showing self-supporting 307SU192 211 307SU192 181
120 309 225 520 capacity, verify the possible 307SU203 222 307SU203 192
307SU217 236 307SU217 206
140 349 245 580 use of support rollers (see 307SU244 263 307SU244 233
200 469 305 770 307SU253 272 307SU253 242
page 30). 307SU278 297 307SU278 267
250 569 355 925 307SU304 323 307SU304 293
307SU326 345 307SU326 315
307SU354 373 307SU354 343
40 65
307B
Nylon Cable Chain
with un-screwable aluminium rods
Inner height (D) 40 mm A Separator Self-Supporting End Brackets
Strong double share Sideband & C - Unassembled Part.no S307 Capacity Diagram The end brackets set allows the two ends of the chain to be
Frame construction with large
anti-friction triple-pin. Alu-rod frames
- Assembled Part.no S307MC The maximum length of the
self-supporting capacity ( LS )
attached to the equipment. Set complete with tiewrap clamps
available on request.
307B
4 40 65 Pin 2 Nylon Cable Chain
are un-screwable from inner and outer Part.no PG307
in relationship to the weight Nylon Type Bright Zinc Plated Steel with un-screwable
radius. As standard the chain comes of the cables and hoses Type*** aluminium rods
with frames every second link, on contained per linear metre.
request with frames every link.
Vertical and horizontal separator 30
*Complete the code by inserting the value of the radius (R): Ex. 307B075 1 Supplementary movable
Where: 0=090; 1=120; 2=140; 3=200; 4=250; 7=075 separators.
L 70 72.5
**Complete the code by inserting the value of the quote C and the radius (R): Ex. 307B 1 2 3 1 L
LS
Chain equipped with aluminium rods every pitch: complete the code by inserting the letter D. 17.5
Ex. 307B0751 D LS
2 30
17.5
LS N R H N M 20 13 114
LS mm mm mm mm 14 32 14
2 R 075 219 180 375
090 249 195 425 ø6.5 12
70 6.5
M H 120 309 225 520 The red marking in the ø6.5 FA FA
60
140 349 245 580 diagram area considers the
200 469 305 770 difference of weight between 35
Length of chain (L) 250 569 355 925 various widths of chains
assembled with rods every Chain F Chain F
Half travel distance ( LS ) second pitch. Steel laminar cover.
2 Type mm Type mm
plus length of curve (M) 307B075 98 307B075 68
For applications with LS2 307B100 123 307B100 93
L= LS + M and weights not included in
307B150 173 307B150 143
2 the area of the diagram
307B200 223 307B200 193
showing self-supporting
307B250 273 307B250 243
capacity, verify the possible 307B300 323 307B300 293
use of support rollers (see Special widths F=A-19 Special widths F=A-49
page 30).
Nylon Type Bright Zinc Plated Steel
Part Numbers Type Part Numbers
Complete Set Assembled Complete Set Assembled
Chain End Brackets Chain End Brackets Special tool to remove the
connecting pivots:
Type Set Type Set Part Number PZ036.
307B... AN307KM 307B... A307KM **
Complete Set Unassembled Complete Set Unassembled
Chain End Brackets Chain End Brackets
Type Set Type Set
307B... AN307K 307B... A307K **
Tiewrap Clamp
Assembl. SFCT307B *KM For further information please
consult Brevetti Stendalto’s
Unassembl. SFCT307B *K Technical Office
* Inner width (C)
102 Version with Alu-rods on every second pitch. ** 1=Pos.1; 2=Pos.2; 3=Pos.3 103
*** Available on request in stainless steel
46,5 65
®
307E
Nylon Cable Chain
with alu-drawn frames
Inner height (D) 46,5 mm A Separator Self-Supporting End Brackets
Strong side-bands chain with C - Unassembled Part.no S307EF Capacity Diagram The end brackets set allows the two ends of the chain to be
dovetailed links and triple low friction
pins. Alu-drawn frames mounted each
- Assembled Part.no S307EFMC The maximum length of the
self-supporting capacity ( LS )
attached to the equipment. Set complete with tiewrap clamps
available on request.
307E
4 46,5 65 Pin 2
in relationship to the weight
Nylon Cable Chain
second pitch full-pitch frames version Part.no PG307 Nylon Type Bright Zinc Plated Steel with alu-drawn
available on demand. of the cables and hoses Type*** frames
Special C size available on demand. contained per linear metre.
Vertical and horizontal separator
systems are available. 30
20
15
2
1,5
Fig. A Fig. B
3
technical dept. 288 65 250 46,5 075-090-120-140-170-200-250 2,35 307E250]]]* 1
0 1 2 3 4
The chain can be fixed frontally, Chain fixed outside the radius. (Fig B)
338 65 300 46,5 075-090-120-140-170-200-250 2,50 307E300]]]* inner or outer radius. (Fig A) See end brackets mounting
LS Max unsupported length
variations page 31.
C+38 65 ..... 46,5 075-090-120-140-170-200-250 307E]]]]]]** 2
*Complete the code by inserting the value of the radius (R): Ex. 307E075120
**Complete the code by inserting the value of the quote C and the radius (R): Ex. 307E123120 L 70 72.5
Chain equipped with alu-drawn frames full-pitch: complete the code by inserting the letter D. L
Ex. 307E075120D LS 17.5
LS 30
2 17.5
LS N R H N M 20 13 114
LS mm mm mm mm 14 32 14
2 R 075 219 180 380
090 249 195 425 ø6.5
6.5 12
70 M 120 309 225 520 ø6.5 FA FA
H 60
The red marking in the
140 349 245 580
170 409 275 675
diagram area considers the 35
200 469 305 770 difference of weight between
Length of chain (L) 250 569 355 930 various widths of chains How to open alu-drawn frames
Chain F Chain F
Half travel distance ( LS ) assembled with alu-drawn
Type mm Type mm
2 frames every second pitch.
plus length of curve (M) 307E075 94 307E075 64
For applications with LS2 307E100 119 307E100 89
L= LS + M and weights not included in 307E150 169 307E150 139
2
the area of the diagram 307E200 219 307E200 189
showing self-supporting 307E250 269 307E250 239
capacity, verify the possible 307E300 319 307E300 289
use of support rollers (see Special widths F=A-19 Special widths F=A-49
page 30). Supplementary movable
separators.
Nylon Type Bright Zinc Plated Steel
Part Numbers Type Part Numbers
Complete Set Assembled Complete Set Assembled Special tool to remove the
Chain End Brackets Chain End Brackets connecting pivots:
Type Set Type Set Part Number PZ036.
307E... AN307KM 307E... A307EKM]**
Complete Set Unassembled Complete Set Unassembled
Chain End Brackets Chain End Brackets
Type Set Type Set
307E... AN307K 307E... A307EK]**
Tiewrap Clamp For further information please
Assembl. SFCT307E]]]*KM consult Brevetti Stendalto’s
Technical Office
Version alu-drawn frames mounted each second pitch. Unassembl.SFCT307E]]]*K
104 * Inner width (C) 105
** 1=Pos.1; 2=Pos.2; 3=Pos.3
*** Available on request in stainless steel
A
C
®
4 57 75
308SU
Nylon Cable Chain with opening frames
Inner height (D) 57 mm Separator Self-Supporting End Brackets
A
A
- Unassembled Part.no S308C Capacity Diagram The end brackets set allows the two ends of the chain to be attached to
Strong double share Sideband & Frame C Part.no S308CMCI
construction with large anti-friction
- Assembled*
- Assembled** Part.no S308CMCE
The maximum length of the
self-supporting capacity ( LS )
the equipment. Set complete with tiewrap clamps available on request.
Nylon Type Bright Zinc Plated Steel
308SU
triple-pin. Frames opening from inner and Strong-hold separator 2 Nylon Cable Chain
for C > 250 mm
in relationship to the weight Type*** with opening frames
outer radius. As standard the chain comes 4 D B 5
with frames every second link, on request 4 57 75 - Unassembled Part.no S308SHF of the cables and hoses
- Assembled* Part.no S308SHFMCI contained per linear metre.
with frames every link. Vertical and horizontal - Assembled** Part.no S308SHFMCE
modular separator system is available. Pin Part.no PG308
C 40
* for chain opening outer radius 30
** for chain opening inner radius
20
15
Technical characteristics A B C D R Weight/m Chain
10
when self-supported mm mm mm mm mm kg Part Number 8
2
1,5
The chain can be fixed frontally,
inner or outer radius. (Fig A)
L
Chain fixed outside the radius. (Fig A)
See end brackets mounting
variations page 31.
L 78.5
Separation System
To choose the separators see
page. 196
3
117 75 73 57 135-150-180-200-230-280-300-400-600 2,54 308SU073 * 1 73
technical dept. 0 1 2 3 4 5
127 75 83 57 135-150-180-200-230-280-300-400-600 2,56 308SU083 * LS Max unsupported length 26,5
132 75 88 57 57 75
135-150-180-200-230-280-300-400-600 2,56 308SU088 * 2 21
26,5
LS N 139 75 95 57 135-150-180-200-230-280-300-400-600 2,58 308SU095 * 125 How to open the cover.
15
LS 10 45 10
149 75 105 57 135-150-180-200-230-280-300-400-600 2,59 308SU105 * LS
2 R 157 75 113 57 135-150-180-200-230-280-300-400-600 2,62 308SU113 * LS
ø6.5
80 168 75 124 57 135-150-180-200-230-280-300-400-600 2,65 308SU124 * 2 8.5 15
M H FA F A
182 75 138 57 135-150-180-200-230-280-300-400-600 2,67 308SU138 * 65
ø6.5
207 75 163 57 135-150-180-200-230-280-300-400-600 2,73 308SU163 *
232 75 188 57 135-150-180-200-230-280-300-400-600 2,79 308SU188 * 43
106 Version with frames mounted on every pitch. * Inner width (C) 107
** 1=Pos.1; 2=Pos.2; 3=Pos.3
*** Available on request in stainless steel
C
48 75 ®
308B
Nylon Cable Chain
with un-screwable aluminium rods
Inner height (D) 48 mm A Separator Self-Supporting End Brackets
Strong double share Sideband & C - Unassembled Part.no S3000F Capacity Diagram The end brackets set allows the two ends of the chain to be
Frame construction with large
anti-friction triple-pin. Alu-rod frames 4,5 48 75
- Assembled
Pin
Part.no S3000FMC The maximum length of the
self-supporting capacity ( LS
2
)
attached to the equipment. Set complete with tiewrap clamps
available on request.
308B
Nylon Cable Chain
are un-screwable from inner and outer Part.no PG308
in relationship to the weight Nylon Type Bright Zinc Plated Steel with un-screwable
radius. As standard the chain comes of the cables and hoses Type*** aluminium rods
with frames every second link, on contained per linear metre.
request with frames every link.
Vertical and horizontal separator 40
20
15
Technical characteristics A B C D R Weight/m Chain
10
when self-supported mm mm mm mm mm kg Part Number 8
3 Acceleration 40 m/s2
For higher requirements please consult our
256
306
75
75
200
250
48
48
150-180-200-230-280-300-400 3,15
150-180-200-230-280-300-400 3,30
308B200 *
308B250 *
3
2
1,5 Fig. A
The chain can be fixed frontally,
Fig. B
Chain fixed outside the radius. (Fig B)
3
technical dept. 356 75 300 48 150-180-200-230-280-300-400 3,45 308B300 * 1
0 1 2 3 4 5
inner or outer radius. (Fig A) See end brackets mounting
C+56 75 ..... 48 150-180-200-230-280-300-400 308B ** LS Max unsupported length variations page 31.
2
*Complete the code by inserting the value of the radius (R): Ex. 308B200 1
Where: 1=150; 2=180; 3=200; 4=230; 5=280; 6=400
**Complete the code by inserting the value of the quote C and the radius (R): Ex. 308B 1 2 3 1 L 73 L 78.5
Chain equipped with aluminium rods every pitch: complete the code by inserting the letter D. LS
26,5
Ex. 308B2001 D LS 21
2 26,5
LS N R H N M 125
15
LS mm mm mm mm 10 45 10
2 R 150 374 270 635
ø6.5
180 434 300 725
80 8.5 15
M H 200 474 320 790 FA F A
65
230 534 350 885
ø6.5
The red marking in the
280 634 400 1040 43
diagram area considers the
Length of chain (L) 300 675 420 1105
difference of weight between
400 874 520 1420
Half travel distance ( LS ) various widths of chains
Chain F Chain F
2 assembled with rods every Steel laminar cover.
plus length of curve (M) Type mm Type mm
second pitch.
308B100 135 308B100 93
L= LS + M For applications with LS 308B150 185 308B150 143
2 2
and weights not included in 308B200 235 308B200 193
the area of the diagram 308B250 285 308B250 243
showing self-supporting 308B300 335 308B300 293
Special widths F=A-21 Special widths F=A-63
capacity, verify the possible
use of support rollers (see
Nylon Type Bright Zinc Plated Steel Supplementary movable
page 30). separators.
Part Numbers Type Part Numbers
Complete Set Assembled Complete Set Assembled
Chain End Brackets Chain End Brackets
Type Set Type Set Special tool to remove the
308B... AN308KM 308B... A308KM ** connecting pivots:
Part Number PZ038.
Complete Set Unassembled Complete Set Unassembled
Chain End Brackets Chain End Brackets
Type Set Type Set
308B... AN308K 308B... A308K **
Tiewrap Clamp
Assembl. SFCT308B]]]*KM
Unassembl.SFCT308B]]]*K For further information please
* Inner width (C) consult Brevetti Stendalto’s
** 1=Pos.1; 2=Pos.2; 3=Pos.3 Technical Office
*** Available on request in stainless steel
108 Version with Alu-rods on every second pitch. 109
C
56,5 75 ®
308E
Nylon Cable Chain
with alu-drawn frames
Inner height (D) 56,5 mm A Separator Self-Supporting End Brackets
Strong side-bands chain with C - Unassembled Part.no S308EF Capacity Diagram The end brackets set allows the two ends of the chain to be
dovetailed links and triple low friction
pins. Alu-drawn frames mounted each
- Assembled
Pin
Part.no S308EFMC The maximum length of the
self-supporting capacity ( LS )
attached to the equipment. Set complete with tiewrap clamps
available on request.
308E
4 56,5 75
2
in relationship to the weight
Nylon Cable Chain
second pitch full-pitch frames version Part.no PG308 Nylon Type Bright Zinc Plated Steel with alu-drawn
available on demand. of the cables and hoses Type*** frames
Special C size available on demand. contained per linear metre.
Vertical and horizontal separator
systems are available. 40
30
20
15
Technical characteristics A B C D R Weight/m Chain
10
3 Acceleration 40 m/s2
For higher requirements please consult our
244
294
75
75
200
250
56,5
56,5
135-150-180-200-230-280-300-400 3,05
135-150-180-200-230-280-300-400 3,15
308E200]]]*
308E250]]]*
3
2
1,5
Fig. A
The chain can be fixed frontally,
inner or outer radius. (Fig A)
Fig. B
Chain fixed outside the radius. (Fig B)
See end brackets mounting
3
1
technical dept. 344 75 300 56,5 135-150-180-200-230-280-300-400 3,25 308E300]]]* 0 1 2 3 4 5 variations page 31.
C+44 75 ..... 56,5 135-150-180-200-230-280-300-400 308E]]]]]]** LS Max unsupported length
2
*Complete the code by inserting the value of the radius (R): Ex. 308E200135
**Complete the code by inserting the value of the quote C and the radius (R): Ex. 308E123135 L 73 L 78.5
Chain equipped with alu-drawn frames full-pitch: complete the code by inserting the letter D. LS
Ex. 308E200135D 26,5
LS 21
2 26,5
R H N M 15 125
LS N
10 45 10
LS mm mm mm mm
2 135 345 255 585
ø6.5
R
150 375 270 635 8.5 15
80 FA F A
M H 180 435 300 730 The red marking in the 65
ø6.5
200 475 320 790 diagram area considers the
230 535 350 885 difference of weight between 43
Length of chain (L) 280 635 400 1040 various widths of chains
300 675 420 1105 assembled with alu-drawn Chain F Chain F
Half travel distance ( LS ) 400 875 520 1420
How to open alu-drawn frames
2 frames every second pitch. Type mm Type mm
plus length of curve (M) 308E100 123 308E100 81
For applications with LS2 308E150 173 308E150 131
L= LS + M and weights not included in 308E200 223 308E200 181
2 the area of the diagram 308E250 273 308E250 231
showing self-supporting 308E300 323 308E300 281
capacity, verify the possible Special widths F=A-20 Special widths F=A-62
use of support rollers (see
page 30).
Supplementary movable
Nylon Type Bright Zinc Plated Steel separators.
Part Numbers Type Part Numbers
Complete Set Assembled Complete Set Assembled
Chain End Brackets Chain End Brackets
Type Set Type Set Special tool to remove the
connecting pivots:
308E... AN308KM 308E... A308EKM]** Part Number PZ038
Complete Set Unassembled Complete Set Unassembled
Chain End Brackets Chain End Brackets
Type Set Type Set
308E... AN308K 308E... A308EK]**
Tiewrap Clamp
Assembl. SFCT308E]]]*KM
For further information please
Unassembl.SFCT308E]]]*K
consult Brevetti Stendalto’s
* Inner width (C) Technical Office
** 1=Pos.1; 2=Pos.2; 3=Pos.3
110 Version alu-drawn frames mounted each second pitch. *** Available on request in stainless steel 111
A
C
®
5 75,5 100
309SU
Nylon Cable Chain with opening frames
Inner height (D) 75,5 mm A Separator Self-Supporting End Brackets
A
Strong double share Sideband & Frame C - Unassembled Part.no S309S/3178 Capacity Diagram The end brackets set allows the two ends of the chain to be attached to
Part.no S309S/3178MCI
construction with large anti-friction
triple-pin. Frames opening from inner
- Assembled*
- Assembled** Part.no S309S/3178MCE
The maximum length of the
self-supporting capacity ( LS )
the equipment. Set complete with tiewrap clamps available on request.
Nylon Type Bright Zinc Plated Steel
309SU
and outer radius. Strong-hold separator 2 Nylon Cable Chain
6 in relationship to the weight Type*** with opening frames
As standard the chain comes with 55 D B
75,5 100
for C > 250 mm
of the cables and hoses
- Unassembled Part.no S309HOFL
frames every second link, on request - Assembled Part.no S309HOFLMC contained per linear metre.
with frames every link. S309HOFL Pin Part.no PG309H
Vertical and horizontal modular C * for chain opening outer radius
separator system is available. ** for chain opening inner radius 40
30
20
15
Technical characteristics A B C D R Weight/m Chain
10
2
1,5
1
The chain can be fixed frontally,
inner or outer radius. (Fig A)
Chain fixed outside the radius. (Fig B)
See end brackets mounting
variations page 31.
Separation System
To choose the separators see
page. 196
3
technical dept. 192 100 139 75,5 150-200-250-300-350-400-500-600 4,27 309SU139 * 0 1 2 3 4 5 6 7
L 140 L 100
232 100 179 75,5 150-200-250-300-350-400-500-600 4,40 309SU179 * LS Max unsupported length
27
2
267 100 214 75,5 150-200-250-300-350-400-500-600 4,51 309SU214 * 46
LS N 293 100 240 75,5 150-200-250-300-350-400-500-600 4,60 309SU240 * 27
LS 317 100 264 75,5 150-200-250-300-350-400-500-600 4,67 309SU264 * 50 25,5
2 R 157
343 100 290 75,5 150-200-250-300-350-400-500-600 4,75 309SU290 *
LS 15 50 15
100 367 100 314 75,5 150-200-250-300-350-400-500-600 4,83 309SU314 *
M H
393 100 340 75,5 150-200-250-300-350-400-500-600 4,90 309SU340 * LS
2 ø10.5 11 22
417 100 364 75,5 150-200-250-300-350-400-500-600 4,99 309SU364 * ø10.5 FA FA
80
472 100 419 75,5 150-200-250-300-350-400-500-600 5,20 309SU419 *
Length of chain (L) 541 100 488 75,5 150-200-250-300-350-400-500-600 5,40 309SU488 * 54
Half travel distance ( LS ) *Complete the code by inserting the value of the radius (R): Ex. 309SU116 2 5 0
Chain equipped with nylon frame every pitch: complete the code by inserting the letter D. Chain F Chain F
2
plus length of curve (M) Ex. 309SU116250 D The red marking in the Type mm Type mm
309SU064 92 309SU064 50
diagram area considers the
L= LS + M R H N M
difference of weight between
309SU084 112 309SU084 70 How to open the cover.
2 mm mm mm mm 309SU109 137 309SU109 95
150 406 300 675 various widths of chains 309SU116 144 309SU116 102
200 506 350 830 assembled with nylon frames 309SU139 167 309SU139 125
250 606 400 985 every second pitch. 309SU179 207 309SU179 165
309SU214 242 309SU214 200 Protection version
300 706 455 1145
350 806 500 1300 For applications with LS2
309SU240 268 309SU240 226
and weights not included in 309SU264 292 309SU264 250
400 906 555 1460
309SU290 318 309SU290 276
500 1106 650 1770 the area of the diagram
309SU314 342 309SU314 300
600 1306 750 2085 showing self-supporting 309SU340 368 309SU340 326
capacity, verify the possible 309SU364 392 309SU364 350
use of support rollers (see 309SU419 447 309SU419 405
page 30). 309SU488 516 309SU488 474
309B
Nylon Cable Chain
with un-screwable aluminium rods
A
Inner height (D) 70 mm Self-Supporting End Brackets
C
Separator
Strong double share Sideband & - Unassembled Part.no S309C Capacity Diagram The end brackets set allows the two ends of the chain to be
Frame construction with large
anti-friction triple-pin. Alu-rod frames
- Assembled
Pin
Part.no S309CMC The maximum length of the
self-supporting capacity ( LS
2
)
attached to the equipment. Set complete with tiewrap clamps
available on request.
309B
Nylon Cable Chain
are un-screwable from inner and outer in relationship to the weight with un-screwable
Part.no PG309H Nylon Type Bright Zinc Plated Steel
radius. As standard the chain comes of the cables and hoses aluminium rods
Type***
with frames every second link, on contained per linear metre.
request with frames every link.
Vertical and horizontal separator sys- 40
20
15
Technical characteristics A B C D R Weight/m Chain
10
when self-supported mm mm mm mm mm kg Part Number 8
3 Acceleration 40 m/s2
For higher requirements please consult our
253
303
100
100
200
250
70
70
150-200-250-300-350-400-500-600
150-200-250-300-350-400-500-600
4,55
4,70
309B200 *
309B250 *
3
2
1,5 Fig. A
The chain can be fixed frontally,
Fig. B
Chain fixed outside the radius. (Fig B)
3
technical dept. 353 100 300 70 150-200-250-300-350-400-500-600 4,85 309B300 * 1
inner or outer radius. (Fig A) See end brackets mounting
0 1 2 3 4 5 6
variations page 31. Steel laminar cover.
453 100 400 70 150-200-250-300-350-400-500-600 5,20 309B400 * LS Max unsupported length
C+53 100 ..... 70 150-200-250-300-350-400-500-600 309B ** 2
*Complete the code by inserting the value of the radius (R): Ex. 309B150 2 L 140 L 100
Where: 1=150 2=200; 3=250; 4=300; 5=350; 6=400; 7=500; 8=600
**Complete the code by inserting the value of the quote C and the radius (R): Ex. 309B 1 2 3 2 LS 27
Chain equipped with aluminium rods every pitch: complete the code by inserting the letter D. LS 46
Ex. 309B1502 D 2 27
50 25,5
157
15 50 15 Supplementary movable
R H N M separators.
LS N ø10.5
LS mm mm mm mm 11 22
ø10.5 FA 80 FA
2 R 150 406 300 675 The red marking in the
200 506 350 830 diagram area considers the 54
100 M H 250 606 400 985 difference of weight between Version with aluminium
300 706 455 1145 Chain F Chain F draw plates
various widths of chains
350 806 500 1300 Type mm Type mm
assembled with rods every
Length of chain (L) 400 906 555 1460 309B100 129 309B100 87
second pitch.
500 1106 650 1770
Half travel distance ( LS )
309B150 179 309B150 137
2 600 1306 750 2085 For applications with LS2 309B200 229 309B200 187
plus length of curve (M) and weights not included in 309B250 279 309B250 237
the area of the diagram 309B300 329 309B300 287
L= LS + M showing self-supporting 309B400 429 309B400 387
2
capacity, verify the possible Special widths F=A-24 Special widths F=A-66
use of support rollers (see On request available with
page 30). Nylon Type Bright Zinc Plated Steel aluminium draw plates
Part Numbers Type Part Numbers Example Part Number:
309T * **
Complete Set Assembled Complete Set Assembled
Chain End Brackets Chain End Brackets
Type Set Type Set * Inner width (C)
** Bending radius (R)
309B... AN309KM 309B... A309KM **
Complete Set Unassembled Complete Set Unassembled
Chain End Brackets Chain End Brackets
Type Set Type Set
309B... AN309K 309B... A309K **
Tiewrap Clamp
Assembl. SFCT309B *KM
Unassembl. SFCT309B *K For further information please
consult Brevetti Stendalto’s
* Inner width (C) Technical Office
** 1=Pos.1; 2=Pos.2; 3=Pos.3
114 Version with Alu-rods on every second pitch. *** Available on request in stainless steel 115
Completely enclosed
Quickly removable design to protect chain
Nylon Cable Chains covers with a contents from steel and
“Snap-Fit” action
Protection Series wood chips, dust, etc.
117
®
H57PC
Nylon chain with opening aluminium covers
60
Technical characteristics A B C D R Weight/m Chain
40 Separation System
when self-supported mm mm mm mm mm kg Part Number To choose the separators see
20
113 85 75 53,5 180-200-250-300-350-400 4,23 H57PC075 * page. 196
Speed 8 m/s
LS N Separator
LS Ø9x11,5
Ø9x11,535 35 F23,5
8,523,5 F1
- Unassembled Part.no S57CF3
2 The area in the diagram 16
R - Assembled* Part.no S57CF3MCI
considers the difference of
90 H
H57PN - Assembled** Part.no S57CF3MCE
weight between various 18,5 8,545 F F1
M * for chain opening outer radius 8,5 F F18,5
F1
Version nylon covers ** for chain opening inner radius widths of chain. Chain 16 16 Chain F1
A B C D R Weight/m Chain Tiype mm Type mm
Red for self-supporting H57PC075 51 H57PC075 98
mm mm mm mm mm kg Part Number 18,5 45 45 18,5
18,5
H57PC100 7618,5 H57PC100 123 Easy opening of the pin junction.
LS 188 85 150 57 150-180-200-250-300-350-400 4,47 H57PN150 * chain, green for chain in
H57PC125 101 H57PC125 148
MOVING
LS
238 85 200 57 150-180-200-250-300-350-400 4,92 H57PN200 * admissible sagging.
POINT
2
M1 R H57PC150 126 H57PC150 173
288 85 250 57 150-180-200-250-300-350-400 5,45 H57PN250 * H57PC175 151 H57PC175 198 Allen key
H
250 *Complete the code by inserting the value of the radius (R): Ex. H57PN188 2 5 0 For applications with H57PC200 176 H57PC200 223 for the opening
FIXED POINT
**H57PN with R 150: not to be used in sliding applications. and weights not H57PC225 201 H57PC225 248 of the pin
90 N1
H80PC A
C
Nylon chain with aluminium covers
5 76,5 114
3 3
8
H110PC
Nylon chain with opening aluminium covers
Inner height (D) 107 mm A Separator Self-Supporting Bright Zinc Plated Steel End Brackets
C
Sideband construction with quickly - Unassembled Part.no S110F3 Capacity Diagram The end brackets set allows the two ends of the chain to be
removable pin.
Covers openable from either side - Assembled*
- Assembled**
Part.no S110F3MCI
Part.no S110F3MCE
The maximum length of the
self-supporting capacity or
attached to the equipment. Set complete with tiewrap
clamps available on request.
H110PC
Nylon chain with
on both inner and outer radius.
Vertical and horizontal modular Pin in admissible sagging ( LS 2
) opening aluminium
6 107 155 10 in relationship to the
separator system are available. Part.no PNH110RS Tiewrap covers
* for chain opening outer radius
weight of the cables and hoses Clamp
** for chain opening inner radius contained per linear metre.
200
150
100
78,5
380 155 325 107 250-300-400-500-600-700-750 14,73 110PC325 ]]]*
15,30 110PC350 ]]]*
LS N
405 155 350 107 250-300-400-500-600-700-750 LS
15,81 110PC375 ]]]*
LS
2 430 155 375 107 250-300-400-500-600-700-750 LS
R
2 35
*Complete the code by inserting the value of the radius (R): Ex. 110PC350 2 5 0
11
160 M H F1 F2
A
C Separator
LS 20 60 20
- Unassembled Part.no S110F3/8687 The area in the diagram
MOVING 100
LS
POINT
2
M1 R - Assembled* Part.no S110F3/8687MCI considers the difference of
6 107 155 10 - Assembled** Part.no S110F3/8687MCE weight between various Chain F1 Chain F2
H
350 Pin widths of chain. Type mm Type mm
FIXED POINT 160 N1 Part.no PNH110RS 110PC150 120 110PC150 112
110PC175 145 110PC175 137
* for chain opening outer radius Red for self-supporting 110PC200 170 110PC200 162 Easy opening of the pin
** for chain opening inner radius 110PC225 195 110PC225 187 junction.
chain, green for chain in 110PC250 220 110PC250 212
R H N M N1 M1 110PC275 245 110PC275 237
admissible sagging.
mm mm mm mm mm mm H110PA 110PC300
110PC325
110PC350
270
295
320
110PC300
110PC325
110PC350
262
287
312
Allen key
for the opening
250 657 468 1110 1095 2375
Version with openable frame by both sides For applications with 110PC375 344 110PC375 336 of the pin
300 757 518 1265 1335 2935 110PA429 399 110PA429 391
A B C D R Weight/m Chain and weights not 110PA498 468 110PA498 460
400 957 618 1580 1805 4045 Special widths F= C-85 Special widths F= C-93
500 1157 718 1895 2280 5160 mm mm mm mm mm kg Part Number included in the diagram of
600 1357 818 2205 2750 6270 484 155 429 107 250-300-400-500-600-700-750 16,90 110PA429 ]]]* self-supporting capacity, verify
10 mm
700 1557 918 2520 3225 7385 553 155 498 107 250-300-400-500-600-700-750 18,27 110PA498 ]]]* the possible use of support Bright Zinc Plated Steel Tiewrap Clamp kit mounted
750 1657 968 2680 3460 7940 *Complete the code by inserting the value of the radius (R): Ex. 110PC429 2 5 0 rollers (see page 30). Type Part Number on female attachment
Complete Set Assembled Part Number
Chain End Brackets Assembled SFCT110 *FKM
type Set
Length of chain (L) Unassembled SFCT110 *FK
110PC A110PC KM **
* Inner width (C)
Half travel distance ( LS ) 110PA A110PA KM **
2 Tiewrap Clamp kit mounted
plus length of curve (M) or (M1) Complete Set Unassembled
Chain End Brackets on male attachment Suitable to long travel distance.
type Set
L= LS + M or M1 110PC A110PC K ** Part Number
2 Assembled SFCT110 *MKM
110PA A110PA K ** For further information please
Available on request in stainless steel. Unassembled SFCT110 *MK consult Brevetti Stendalto’s
** 1=Pos.1; 2=Pos.2; 3=Pos.3 * Inner width (C) Technical Office
See mounting variations page 31
122 123
A
C
®
2,5 25 38
325PI
Nylon Cable Chain
with opening frames
Inner height (D) 25 mm A Separator Self-Supporting End Brackets
Single link construction with central C - Unassembled Part.no S325L Capacity Diagram The end brackets set allows the two ends of the chain to be
large anti-friction pivot, for high torsion
and tensile resistance.
- Assembled Part.no S325LMC The maximum length of the
self-supporting capacity ( LS
2
)
attached to the equipment. Set complete with tiewrap clamps
available on request.
325PI
Nylon Cable Chain
Frames opening from inner radius. in relationship to the weight Nylon Type Bright Zinc Plated Steel with opening frames
Vertical separators available. 2,5 25 38 of the cables and hoses Type***
contained per linear metre.
10
9
8
7
For higher requirements please consult our 120 38 103 25 075-100-125-150 1,70 325PI103 * 1
technical dept. *Complete the code by inserting the value of the radius (R): Ex. 325PI040 0 7 5
0,5
0 0,5 1 1,5 2 2,5
LS Max unsupported length Fig. A Fig. B
For sliding applications, technical data can 2 Chain fixed outside/inside the Chain fixed outside or inside the
slightly change according to frequency, added LS N radius. (Fig A) radius. (Fig B)
weight and environment. LS R H N M N1 M1
2 mm mm mm mm mm mm
R
!
SLIDING VERSION 2
to be ordered with pivoting MOVING POINT M1 R 40 6,5
F F2 F1
end brackets set H
140
The red marking in the
FIXED POINT N1 diagram area considers the
difference of weight between Separation System
Chain F Chain F2 F1 To choose the separators see
Length of chain (L) various widths of chain. Type mm Type mm mm page. 196
325PI...040 51 325PI...040 22 25,5
Half travel distance ( LS ) 325PI...060 71 325PI...060 42 45,5
2
plus length of curve (M) or (M1) 325PI...076 87 325PI...076 58 61,5
For applications with LS2 325PI...103 114 325PI...103 85 88,5
L= LS + M or M1 and weights not included in
2 the area of the diagram
showing self-supporting Nylon Type Bright Zinc Plated Steel
capacity, verify the possible Part Numbers Type Part Numbers
use of support rollers (see
Complete Set Assembled Complete Set Assembled
page 30). Chain End Brackets Chain End Brackets Suitable to long travel distance
in frame every pitch version.
Type Set Type Set To choose the guide channel
325PI... AN325P *KM 325PI... A325LK see page 54
Complete Set Unassembled Tiewrap Clamp
Chain End Brackets Part Number
Type Set Assembled
325PI... AN325P *K CFC325L *KM
Tiewrap Clamp Unassembled
Part Number CFC325L *K
For further information please
Assembled CFC325L *KM * Inner width (C) consult Brevetti Stendalto’s
Unassembled CFC325L *K ***Available on request in stainless steel Technical Office
124 125
®
335PS
Nylon cable chain with nylon
cover openable to snap
Inner height (D) 35 mm Separator Self-Supporting End Brackets
A
The chain has single link. Nylon cover
is opened only on inner radius.
C - Unassembled Part. no S4353 Capacity Diagram
The maximum length of the
The end brackets set allows the two ends of the chain to
be attached to the equipment.
335PS
- Assembled Part. no S4353MC Nylon cable chain
Supplementary movable separators. self-supporting capacity ( LS
2
) Set complete with tiewrap clamps available on request. with nylon cover
3 35 50 in relationship to the weight openable to snap
Nylon Type
of the cables and hoses
contained per linear metre.
15
13
3 acceleration 50 m/s2
For higher requirements please consult our
119,5 50
166,5 50
103
150
35
35
100-125-150-200
100-125-150-200
1,81
2,21
335PS103
335PS150
*
*
3
2,5
2
1,5
Fig. A
The chain can be fixed frontally,
3
technical dept. *Complete the code by inserting the value of the radius (R): Ex. 335PS050 1 0 0 inner or outer radius. (Fig A)
1
0 0,5 1 1,5 2 2,5 3
LS Max unsupported length L 87
2
17,5
LS N 15
LS R H N M N1 M1 17,5
2 mm mm mm mm mm mm
R LS 24 Ø5,5
100 250 204 420 350 790
LS 15 17
52 M H 125 300 229 500 445 1025
2
150 350 254 580 540 1260
200 450 304 735 730 1725
F F1
!
SLIDING VERSION difference of weight between
H to be ordered with pivoting Chain F F1
140 end brackets set L= LS + M or M1 various widths of chain.
type mm mm
2
FIXED POINT N1 335P...050 35 61
335P...076 61 87
For sliding applications, characteristics
techniques may vary depending on the
For applications with LS2
335P...103 88 114
frequency, added weight and work environment. and weights not included in 335P...150 135 161
the area of the diagram
showing self-supporting Nylon Type
capacity, verify the possible Part Numbers
use of support rollers (see
Complete Set Assembled
page 30). Chain End Brackets
Type Set
335 AN335P]]]*KM]**
Complete Set Unassembled
Chain End Brackets
Type Set
335 AN335P]]]*K
Tiewrap Clamp
Part Number
335 PFN335]]]* For further information please
* Inner width (C) consult Brevetti Stendalto’s
** 1=Pos.1; 2=Pos.2; 3=Pos.3 Technical Office
126 127
A
C
®
3 35 49
435PU
Nylon Protection Cable Chain
with opening covers
A Separator Self-Supporting End Brackets
Inner height (D) 35 mm Capacity Diagram
C - Unassembled Part.no S4353 The end brackets set allows the two ends of the chain to be
Sideband & Frame construction with
large anti-friction single-pin. - Assembled*
- Assembled**
Part.no S4353MCI
Part.no S4353MCE
The maximum length of the
self-supporting capacity ( LS
2
)
attached to the equipment. Set complete with tiewrap clamps
available on request.
435PU
Vertical separators are available. Nylon Protection
in relationship to the weight
3 35 49 Pin Nylon Type Nylon Type Cable Chain with
Part.no PG4353 of the cables and hoses opening covers
contained per linear metre.
* for chain opening outer radius
** for chain opening inner radius
15
13
10
9
3 Acceleration 50 m/s2
For higher requirements please consult our
80
96
49
49
60
76
35
35
075-100-125-150-200
075-100-125-150-200
1,45
1,60
435PU060
435PU076
*
*
2,5
2
1,5
Fig. A Fig. B
Separation System
To choose the separators see
page. 196
3
technical dept. 117 49 97 35 075-100-125-150-200 1,75 435PU097 * 1 The chain can be fixed frontally, Chain fixed outside the radius. (Fig B)
123 49 103 35 075-100-125-150-200 1,90 435PU103 * 0 0,5 1 1,5 2 2,5 3 inner or outer radius. (Fig A) See end brackets mounting
LS Max unsupported length variations page 31
145 49 125 35 075-100-125-150-200 2,10 435PU125 * 2
L 65 L 69
170 49 150 35 075-100-125-150-200 2,35 435PU150 *
17
*Complete the code by inserting the value of the radius (R): Ex. 435PU040 0 6 0 LS
LS 15
2
17 7 17 Bright Zinc Plated
ø5.5 11 24 11
Steel Type***
LS N
R H N M 15
LS
2 mm mm mm mm F F
R 075 199 155 340 The red marking in the
50 100 249 175 415 diagram area considers the 6,5
M H
125 299 200 495 difference of weight between L 107,5
150 349 230 575 various widths of chain. Chain F Chain F
200 449 275 730 Type mm Type mm
435PU040 51 435PU040 26,5 8,5 24 8,5
Length of chain (L) 435PU050 61 435PU050 36,5
Half travel distance ( LS ) For applications with LS2 435PU060 71 435PU060 46,5
2 6,5 12
plus length of curve (M) and weights not included in 435PU076 87 435PU076 62,5 F
the area of the diagram 435PU097 108 435PU097 83,5
L= LS + M showing self-supporting 435PU103 114 435PU103 89,5
2 capacity, verify the possible 435PU125 136 435PU125 111,5 F = A-30
use of support rollers (see 435PU150 161 435PU150 136,5
page 30). Bright Zinc Plated Steel
Nylon Type Nylon Type Type Part Numbers
Part Numbers Part Numbers
Complete Set Assembled
Complete Set Assembled Complete Set Assembled A435P *KM **
AN435P *KM AN435KM ****
Complete Set Unassembled
Complete Set Unassembled Complete Set Unassembled A435P *K **
AN435P *K AN435K ****
Tiewrap Clamp
Tiewrap Clamp Tiewrap Clamp Part Number
Part Number Part Number Complete Set Assembled
Complete Set Assembled Complete Set Assembled CFC435M *KM
CFC435M *KM CFC435M *KM Complete Set Unassembled
Complete Set Unassembled Complete Set Unassembled
CFC435M *K
CFC435M *K CFC435M *K
* Inner width (C)
****1=Pos.1; 2=Pos.2; 3=Pos.3 ** 1=Pos.1; 2=Pos.2; 3=Pos.3
5=Pos.5; 6=Pos.6 *** Available on request in stainless steel
128 129
C
45 64
®
445PU
Nylon Protection Cable Chain
with opening covers
Inner height (D) 45 mm Self-Supporting End Brackets
A Separator
Capacity Diagram The end brackets set allows the two ends of the chain to be
Sideband & Frame construction with C - Unassembled Part.no S445UF
large anti-friction single-pin.
Vertical separators are available.
- Assembled*
- Assembled**
Part.no S445UFMCI
Part.no S445UFMCE
The maximum length of the
self-supporting capacity ( LS
2
)
attached to the equipment. Set complete with tiewrap clamps
available on request.
445PU
Nylon Protection Cable
Pin in relationship to the weight Chain with opening
Nylon Type Nylon Type
of the cables and hoses
4 45 64 Part.no PG445 covers
contained per linear metre.
* for chain opening outer radius
** for chain opening inner radius
30
20
15
Technical characteristics A B C D R Weight/m Chain
10
3 Acceleration 50 m/s2
For higher requirements please consult our
97
103
64
64
75
81
45
45
100-125-150-175-200-250-300
100-125-150-175-200-250-300
2,05
2,10
445PU075
445PU081
*
*
3
2
1,5
Fig. A
The chain can be fixed frontally,
inner or outer radius. (Fig A)
Fig. B
Chain fixed outside the radius. (Fig B)
See end brackets mounting
Separation System
To choose the separators see
page. 196
3
107 64 85 45 100-125-150-175-200-250-300 2,15 445PU085 * variations page 31.
technical dept. 1
41 64
®
445PS
Nylon Protection Cable Chain
with opening covers
Inner height (D) 41 mm A Separator Self-Supporting End Brackets
Sideband construction with anti-friction C - Unassembled Part.no S445CNF Capacity Diagram The end brackets set allows the two ends of the chain to be
sigle-pin.
Covers openable only inner radius. - Assembled
Pin
Part.no S445CNFMC The maximum length of the
self-supporting capacity ( LS
2
)
attached to the equipment. Set complete with tiewrap clamps
available on request.
445PS
Vertical separator system are available. Nylon Protection
in relationship to the weight Cable Chain with
Part.no PG445 Nylon version Nylon version
of the cables and hoses
4 41 64 opening covers
contained per linear metre.
30
20
10
4
when self-supported mm mm mm mm mm kg Part Number 8
6
83 64 61 41 100-125-150-175-200-250-300 1,87 445PS061 *
3 Acceleration 50 m/s2
For higher requirements please consult our
147 64 A
125
*Complete the code
41 100-125-150-175-200-250-300 2,49 445PS125
C by inserting the value of the radius (R): Ex. Es. 445PS061 2 0 0
*
3
2
1,5
Fig. A
The chain can be fixed frontally,
inner or outer radius. (Fig A)
Fig. B
Chain fixed outside the radius. (Fig B)
See end brackets mounting
variations page 31.
3
technical dept. 1 S445CNF
0 1 2 3 4 This separator can be
LS Max unsupported length mounted in 2 ways different
2
L 81 L ensuring the same reliable
For sliding applications, characteristics 83,5
techniques may vary depending on the
4 41 64 R H N M N1 M1 19,5 resistance.
frequency, added weight and work environment.
mm mm mm mm mm mm ❶ MOBILE separator
100 264 200 450 340 740 LS
25
125 314 225 530 460 1020
LS N
LS
2
20 10 19,5
150 364 250 605 580 1300 ø6.5 12,5 35 12,5
LS 175 414 275 685 700 1575
2
R 200 464 300 765 820 1855
250 564 350 920 1055 2410 12
67 H
M 300 664 400 1080 1295 2970
The red marking in the
F F
A diagram area considers the
C difference of weight between 6,2
LS
various widths of chain.
LS
41 64
MOBILE
SLIDING4VERSION
POINT
2 M1 R Chain F Chain F
140
FIXED POINT N1
H
! to be ordered with pivoting
end brackets set For applications with LS
and weights not included
2
type
445PS 061
445PS 075
445PS 125
mm
74
88
138
type
445PS 061
445PS 075
445PS 125
mm
39
53
103
mounted outside the premises
the separator can move
Tiewrap Clamp
Part Number
4 41 64 Complete Set Assembled
SFCT445 *KM
Complete Set Unassembled
SFCT445 *K mounted inside the seats
****1=Pos.1; 2=Pos.2; 3=Pos.3 assumes a fixed position.
5=Pos.5; 6=Pos.6
For further information please
consult Brevetti Stendalto’s
Technical Office
132 133
C
45 64
®
445AU
Nylon Protection Cable Chain
with opening aluminium covers
Inner height (D) 45 mm A Separator Self-Supporting End Brackets
Capacity Diagram
Sideband & Frame construction with C - Unassembled Part.no S445UF The end brackets set allows the two ends of the chain to be
large anti-friction single-pin.
Vertical separators are available.
- Assembled*
- Assembled**
Part.no S445UFMCI
Part.no S445UFMCE
The maximum length of the
self-supporting capacity ( LS
2
)
attached to the equipment. Set complete with tiewrap clamps
available on request.
445AU
Nylon Protection
Pin in relationship to the weight Cable Chain with
Nylon Type Nylon Type
4 45 64 Part.no PG445 of the cables and hoses opening aluminium
contained per linear metre. covers
* for chain opening outer radius
** for chain opening inner radius
30
20
15
Technical characteristics A B C D R Weight/m Chain
10
3 Acceleration 50 m/s2
For higher requirements please consult our
97
103
64
64
75
81
45
45
100-125-150-175-200-250-300
100-125-150-175-200-250-300
2,49
2,59
445AU075
445AU081
*
*
3
2
1,5
Fig. A
The chain can be fixed frontally,
inner or outer radius. (Fig A)
Fig. B
Chain fixed outside the radius. (Fig B)
See end brackets mounting
Separation System
To choose the separators see
page. 196
3
technical dept. 107 64 85 45 100-125-150-175-200-250-300 2,65 445AU085 * 1 variations page 31.
117 64 95 45 100-125-150-175-200-250-300 2,79 445AU095 * 0 1 2 3 4
L 81 L 83,5
LS Max unsupported length
122 64 100 45 100-125-150-175-200-250-300 2,85 445AU100 * 19,5
LS N 2
129 64 107 45 100-125-150-175-200-250-300 2,95 445AU107 * 25
LS
2 139 64 117 45 100-125-150-175-200-250-300 3,08 445AU117 * LS 20 10 19,5
R ø6.5 12,5 35 12,5
147 64 125 45 100-125-150-175-200-250-300 3,24 445AU125 * LS
158 64 136 45 100-125-150-175-200-250-300 3,41 445AU136 * 2
67 H 12
M
172 64 150 45 100-125-150-175-200-250-300 3,61 445AU150 * F F
197 64 175 45 100-125-150-175-200-250-300 3,97 445AU175 * Bright Zinc Plated
222 64 200 45 100-125-150-175-200-250-300 4,35 445AU200 * 6,2 Steel Type***
Length of chain (L) 233 64 211 45 100-125-150-175-200-250-300 4,51 445AU211 * The red marking in the Chain F Chain F
247 64 225 45 100-125-150-175-200-250-300 4,73 445AU225 *
Half travel distance ( LS ) diagram area considers the Type mm Type mm
2 274 64 252 45 100-125-150-175-200-250-300 5,13 445AU252 * difference of weight between 445AU050 63 445AU050 28
plus length of curve (M) 283 64 261 45 100-125-150-175-200-250-300 5,26 445AU261 * various widths of chain.
445AU061 74 445AU061 39
445AU075 88 445AU075 53
308 64 286 45 100-125-150-175-200-250-300 5,63 445AU286 * 445AU081 94 445AU081 59
L= LS + M 334 64 312 45 100-125-150-175-200-250-300 6,00 445AU312 * 445AU085 98 445AU085 63 L 137
2 445AU095 108 445AU095 73
356 64 334 45 100-125-150-175-200-250-300 6,33 445AU334 * 445AU100 113 445AU100 78
445AU107 120 445AU107 85
384 64 362 45 100-125-150-175-200-250-300 6,73 445AU362 * For applications with LS2 445AU117 130 445AU117 95
R H N M 445AU125 138 445AU125 103 10 35 10
*Complete the code by inserting the value of the radius (R): Ex. 445AU050 2 0 0 and weights not included in 445AU136 149 445AU136 114
mm mm mm mm
the area of the diagram 445AU150 163 445AU150 128
100 264 200 450 445AU175 188 445AU175 153
showing self-supporting 445AU200 213 445AU200 178 6,5 12
125 314 225 530 445AU211 224 445AU211 189 F
capacity, verify the possible 445AU225 238 445AU225 203
150 364 250 605
use of support rollers (see 445AU252 265 445AU252 230
175 414 275 685 445AU261 274 445AU261 239
200 464 300 765
page 30). 445AU286 299 445AU286 264
445AU312 325 445AU312 290
250 564 350 920 445AU334 347 445AU334 312
445AU362 375 445AU362 340
300 664 400 1080 Bright Zinc Plated Steel
Nylon Type Nylon Type Type Part Numbers
Part Numbers Part Numbers Complete Set Assembled
Complete Set Assembled Complete Set Assembled A445A *KM **
AN445A *KM AN445KM **** Complete Set Unassembled
Complete Set Unassembled Complete Set Unassembled A445A *K **
* Inner width (C)
AN445A *K AN445K ****
** 1=Pos.1; 2=Pos.2; 3=Pos.3
*** Available on request in stainless steel
Tiewrap Clamp Tiewrap Clamp
Part Numbers Part Numbers
Complete Set Assembled Complete Set Assembled
CFC445M *KM SFCT445 *KM For further information please
consult Brevetti Stendalto’s
Complete Set Unassembled Complete Set Unassembled Technical Office
CFC445M *K SFCT445 *K
134 ****1=Pos.1; 2=Pos.2; 3=Pos.3 135
5=Pos.5; 6=Pos.6
®
475PU
Nylon Protection Cable Chain
with opening covers
Inner height (D) 75,5 mm A Separator Self-Supporting Bright Zinc Plated Steel
Capacity Diagram End Brackets***
Sideband & Frame construction with
large anti-friction single-pin.
C - Unassembled
- Assembled*
Part.no S309S
Part.no S309SMCI
The maximum length of the The end brackets set allows the 475PU
Nylon Protection Cable
Vertical and horizontal modular self-supporting capacity ( LS ) two ends of the chain to Chain with opening
- Assembled** Part.no S309SMCE 2
separator system is available. Pin Part.no PG475
in relationship to the weight be attached to the equipment. covers
75,5 100,5 6 of the cables and hoses
5 * for chain opening outer radius
** for chain opening inner radius contained per linear metre.
40
30
Technical characteristics A B C D R Weight/m Chain
20
when self-supported mm mm mm mm mm kg Part Number 15
112 100,5 74 75,5 180-200-250-300-350-400 4,60 475PU074 * 10
Speed 8 m/s 132 100,5 94 75,5 180-200-250-300-350-400 4,80 475PU094 * 8 Fig. A
LS N 288 100,5 250 75,5 180-200-250-300-350-400 6,50 475PU250 * LS Max unsupported length
LS
2 70
312 100,5 274 75,5 180-200-250-300-350-400 6,75 475PU274 * 15 40 15
2
R 338 100,5 300 75,5 180-200-250-300-350-400 7,05 475PU300 * 22
362 100,5 324 75,5 180-200-250-300-350-400 7,30 475PU324 *
LS 11
105 M H 388 100,5 350 75,5 180-200-250-300-350-400 7,55 475PU350 *
LS F A
412 100,5 374 75,5 180-200-250-300-350-400 7,85 475PU374 * 2
467 100,5 429 75,5 180-200-250-300-350-400 8,50 475PU429 * 40
536 100,5 498 75,5 180-200-250-300-350-400 9,20 475PU498 *
*Complete the code by inserting the value of the radius (R): Ex. 475PU119 1 5 0
Length of chain (L) Chain F
Type mm
Half travel distance ( LS ) 475PU074 35
2 The red marking in the
plus length of curve (M) diagram area considers the 475PU094 55
475PU119 80
difference of weight between How to open the cover.
L= LS + M various widths of chain.
475PU126 87
2 475PU149 110
475PU189 150
R H N M 475PU224 185
475PU250 211
mm mm mm mm
For applications with LS2
475PU274 235
180 460,5 335 775 and weights not included in 475PU300 261
200 500,5 355 840 475PU324 285
the area of the diagram
250 600,5 405 995 475PU350 311
showing self-supporting 475PU374 335
300 700,5 460 1155
350 800,5 505 1310
capacity, verify the possible 475PU498 459
400 900,5 560 1470 use of support rollers (see
page 30).
Bright Zinc Plated Steel
Type Part Numbers
Complete Set Assembled
Chain End Brackets
Type Set
475... A475P]]]*KM **
Complete Set Unassembled
Chain End Brackets
Type Set
475... A475P]]]*K ** For further information please
** 1=Pos.1; 2=Pos.2; 3=Pos.3 consult Brevetti Stendalto’s
*** Available on request in stainless steel Technical Office
136 137
A ®
36 55
660
Nylon Protection Cable Chain
with opening covers
Inner height (D) 36 mm A A A Self-Supporting End Brackets
Double share Sideband & Frame C C C Capacity Diagram The end brackets set allows the
construction with large anti-friction
single-pin. Covers are opening from 4 4 36 55 36 55 2,5 36 55
The maximum length of the
self-supporting capacity ( LS
2
)
two ends of the chain to be
attached to the equipment.
660
Nylon Protection Cable
inner radius. in relationship to the weight Chain with opening
Vertical separators are available. of the cables and hoses covers
660 600 contained per linear metre.
Separator Separator
- Unassembled Part.no S660 - Unassembled Part.no S600
- Assembled Part.no S660MC - Assembled Part.no S600MC
15
3 3
*Complete the code by inserting the value of the radius (R): Ex. 660050 1 5 0 2,5 Fig. A
For higher requirements please consult our 2 The chain can be fixed frontally,
technical dept. **Complete the code by inserting the value of the radius (R): Ex. 60015 1
4
Where: 0=100; 1=150; 2=200;36 55
3=250 1,5 inner or outer radius. (Fig A)
1
0 0,5 1 1,5 2 2,5 3
LS N 59,5 L ø5.5
R H N M LS Max unsupported length
LS 2
2 mm mm mm mm 20
R 15
100 255 180 415 20
50 M H 150 355 230 575
A LS 10 17
200 455 280 730
C LS
250 555 330 885 2 ø5.5 How to open the cover.
A
4 C 36 55
Length of chain (L)
Half travel distance ( LS ) F
2
4 of curve (M) 36 55
plus length
The red marking in the
L= LS + M diagram area considers the
2 difference of weight between
various widths of chain. Chain F
Type mm
A 660 C=50 62
C 660 C=100 112
For applications with LS2 600 C=150 162
and weights not included in
the area of the diagram
4 36 55 showing self-supporting Nylon Type
capacity, verify the possible Part Numbers
use of support rollers (see
Complete Set Assembled
page 30). Chain End Brackets
Type Set
660 C=50 AN660050KM Special tool to remove the
660 C=100 AN660100KM connecting pivots:
600 C=150 AL600KM Part Number PZ010.
138 139
A
C
5 51 78
770
Nylon Protection Cable Chain
with opening covers
Inner height (D) 51 mm A PG770 A
Self-Supporting End Brackets
Double share Sideband & Frame C C
Capacity Diagram The end brackets set allows the
construction with large anti-friction
single-pin. Covers are opening from 5 51 78
PG700
2,5 51 78
The maximum length of the
self-supporting capacity ( LS
2
)
two ends of the chain to be
attached to the equipment.
770
Nylon Protection Cable
inner radius. in relationship to the weight Chain with opening
Vertical separators are available. of the cables and hoses covers
770 700 contained per linear metre.
Separator Separator
- Unassembled Part.no S770 - Unassembled Part.no S700 20
10
Technical characteristics A B C D R Weight/m Chain 8
7
when self-supported mm mmA mm mm mm kg Part Number 6
3 3
3
2,5
Acceleration 30 m/s2 185 78 150 51 150-200-250-300 4,10 770150 * 2 Fig. A
235 78 200 51 150-200-250-300 4,50 770200 * 1,5 The chain can be fixed frontally,
For higher requirements please consult our inner or outer radius. (Fig A)
285 78 250 51 150-200-250-300 5,00 70025 **
technical dept. 5
1
51 78 0 1 2 3 4
*Complete the code by inserting the value of the radius (R): Ex. 770085 1 5 0
LS Max unsupported length
**Complete the code by inserting the value of the radius (R): Ex. 70025 1 2
Where: 0=150; 1=200; 2=250; 3=300
79 L ø6.2
26,5
R H N M LS
LS 25
N LS
mm mm mm mm 26,5
LS 2
2 R 150 378 260 615 15 20
200 478 310 770 How to open the cover.
70 A M H 250 578 365 930
ø6.2
C
300 678 410 1085
L= LS + M Chain F
2
LS Type mm
For applications with 2 770 C=85 100
and weights not included in
770 C=100 115
the area of the diagram
770 C=150 165
A showing self-supporting 770 C=200 215
C capacity, verify the possible 700 C=250 265
use of support rollers (see
2,5 51 78 page 30).
Nylon Type
Part Numbers
Complete Set Assembled
Chain End Brackets Special tool to remove the
connecting pivots:
Type Set Part Number PZ010.
770... AN770 *KM
700 C=250 AL700KM
Complete Set Unassembled
Chain End Brackets
Type Set
770... AN770 *K For further information please
700 C=250 AL700K consult Brevetti Stendalto’s
* Inner width (C) Technical Office
140 141
A
C
®
3 37 55
306CU
Nylon Protection Cable Chain
with opening aluminium covers
Self-Supporting End Brackets
Inner height (D) 37 mm A Separator Capacity Diagram The end brackets set allows the two ends of the chain to be attached to
Strong double share Sideband & Frame C
construction with large anti-friction
- Unassembled
- Assembled
Part.no S306SM
Part.no S306SMMC
The maximum length of the
self-supporting capacity ( LS )
the equipment. Set complete with tiewrap clamps available on request.
306CU
triple-pin.
2 Nylon Type Nylon Type Nylon Protection Cable
Pin in relationship to the weight Chain with opening
Covers are opening from inner and of the cables and hoses aluminium covers
outer radius. 3 37 55 Part.no PG309H
contained per linear metre.
Vertical separators are available.
30
4 57 75
308CU
Nylon Protection Cable Chain
with opening aluminium covers
Inner height (D) 57 mm A Separator Self-Supporting End Brackets
Strong double share Sideband & Frame C - Unassembled Part.no S308C Capacity Diagram The end brackets set allows the two ends of the chain to be attached to
construction with large anti-friction
triple-pin.
- Assembled Part.no S308CMCI
for chain opening outer radius
The maximum length of the
self-supporting capacity ( LS
2
)
the equipment. Set complete with tiewrap clamps available on request.
Nylon Type Bright Zinc Plated Steel
308CU
Nylon Protection Cable
Covers are opening from inner and in relationship to the weight
4 57 75 - Assembled Part.no S308CMCE Type*** Chain with opening
outer radius. for chain opening inner radius of the cables and hoses aluminium covers
Vertical separators are available. Pin contained per linear metre.
Part.no PG308
40
30
20
3 3
4
Acceleration 40 m/s2 3 The chain can be fixed frontally, Chain fixed outside the radius. (Fig A) Separation System
107 75 63 57 150-180-200-230-280-300-400-600 3,19 308CU063 * inner or outer radius. (Fig A)
2 See end brackets mounting To choose the separators see
For higher requirements please consult our 113 75 69 57 150-180-200-230-280-300-400-600 3,27 308CU069 * 1,5 variations page 31. page. 196
technical dept. 117 75 73 57 150-180-200-230-280-300-400-600 3,35 308CU073 * 1 L 73 L 78.5
127 75 83 57 150-180-200-230-280-300-400-600 3,43 308CU083 * 0 1 2 3 4 5
LS Max unsupported length 26,5
132 75 88 57 150-180-200-230-280-300-400-600 3,48 308CU088 * 2 21
LS N 139 75 95 57 150-180-200-230-280-300-400-600 3,56 308CU095 * 26,5
LS 15 125
149 75 105 57 150-180-200-230-280-300-400-600 3,67 308CU105 * LS ø6
2 R .5 10 45 10
157 75 113 57 150-180-200-230-280-300-400-600 3,77 308CU113 * LS
168 75 124 57 150-180-200-230-280-300-400-600 3,91 308CU124 * 2
80 M H 182 75 138 57 150-180-200-230-280-300-400-600 4,06 308CU138 * 8.5 15
FA F A
207 75 163 57 150-180-200-230-280-300-400-600 4,36 308CU163 * 65
232 75 188 57 150-180-200-230-280-300-400-600 4,65 308CU188 *
43
Length of chain (L) 243 75 199 57 150-180-200-230-280-300-400-600 4,78 308CU199 * The red marking in the
257 75 213 57 150-180-200-230-280-300-400-600 4,94 308CU213 * Chain F Chain F
Half travel distance ( LS ) diagram area considers the
2 284 75 240 57 150-180-200-230-280-300-400-600 5,25 308CU240 * difference of weight between Type mm Type mm
plus length of curve (M) 293 75 249 57 150-180-200-230-280-300-400-600 5,37 308CU249 * various widths of chains
308CU038 62 308CU038 -
308CU049 73 308CU049 31
318 75 274 57 150-180-200-230-280-300-400-600 5,48 308CU274 * assembled with nylon frames 308CU063 87 308CU063 45
L= LS + M 344 75 300 57 150-180-200-230-280-300-400-600 5,95 308CU300 * 308CU069 93 308CU069 51
2 every second pitch. 308CU073 97 308CU073 55
366 75 322 57 150-180-200-230-280-300-400-600 6,20 308CU322 * 308CU083 107 308CU083 65
308CU088 112 308CU088 70
394 75 350 57 150-180-200-230-280-300-400-600 6,11 308CU350 * For applications with LS2 308CU095 119 308CU095 77
R H N M 308CU105 129 308CU105 87
*Complete the code by inserting the value of the radius (R): Ex. 308CU105 1 8 0 and weights not included in 308CU113 137 308CU113 95
mm mm mm mm
the area of the diagram 308CU124 148 308CU124 106
150 375 270 635 308CU138 162 308CU138 120
showing self-supporting 308CU163 187 308CU163 145
180 435 300 725 308CU188 212 308CU188 170
capacity, verify the possible 308CU199 223 308CU199 181
200 475 320 790
use of support rollers (see 308CU213 237 308CU213 195
230 535 350 885 308CU240 264 308CU240 222
280 635 400 1040
page 30). 308CU249 273 308CU249 231
308CU274 298 308CU274 256
300 675 420 1105 308CU300 324 308CU300 282
308CU322 346 308CU322 304
400 875 520 1420 308CU350 374 308CU350 332
600 1175 750 2045
Nylon Type Bright Zinc Plated Steel
Part Numbers Type Part Numbers
Complete Set Assembled Complete Set Assembled
Chain End Brackets Chain End Brackets
Type Set Type Set
308 AN308C]]]*KM 308 A308CU]]]*KM **
Complete Set Unassembled Complete Set Unassembled
Chain End Brackets Chain End Brackets
Type Set Type Set
308 AN308C]]]*K 308 A308CU]]]*K **
Tiewrap Clamp For further information please
Assembl. SFCT308S *KM consult Brevetti Stendalto’s
Technical Office
Unassembl. SFCT308S *K
144 * Inner width (C) 145
** 1=Pos.1; 2=Pos.2; 3=Pos.3
*** Available on request in stainless steel
A
C
®
7 72 100
309C
Nylon Protection Cable Chain
with opening covers
Inner height (D) 72 mm A Separator Self-Supporting End Brackets
Strong double share Sideband & C - Unassembled Part.no S309PO Capacity Diagram The end brackets set allows the
Frame construction with large
anti-friction triple-pin.
- Assembled
Pin
Part.no S309POMC The maximum length of the
self-supporting capacity ( LS )
two ends of the chain to be
attached to the equipment.
309C
72 100 2 Nylon Protection Cable
Covers are opening from outer radius 7 Part.no PG309
in relationship to the weight Chain
Vertical and horizontal separator of the cables and hoses with opening covers
systems are available. contained per linear metre.
40
30
20
3 3
4
2
For higher requirements please consult our *Complete the code by inserting the value of the radius (R): Ex. 309C200 2 0 0 1,5
L= LS + M
2
For applications with LS2
and weights not included in Chain F
the area of the diagram Type mm
showing self-supporting 309C200 229
capacity, verify the possible 309C300 329
use of support rollers (see 309C400 429
page 30).
Nylon Type
Part Numbers
Complete Set Assembled
Chain End Brackets
Type Set
309C200 AN309C200KM
309C300 AN309C300KM
309C400 AN309C400KM
Complete Set Unassembled
Chain End Brackets
Type Set
309C200 AN309C200K
309C300 AN309C300K
309C400 AN309C400K For further information please
consult Brevetti Stendalto’s
Technical Office
146 147
A
C ®
5 75,5 100
309CU
Nylon Protection Cable Chain
with opening aluminium covers
Inner height (D) 75,5 mm Separator Self-Supporting End Brackets
A Capacity Diagram
Strong double share Sideband & Frame The end brackets set allows the two ends of the chain to be attached to
C - Unassembled Part.no S309S/3178
construction with large anti-friction
triple-pin.
- Assembled Part.no S309S/3178MCI
for chain opening outer radius
The maximum length of the
self-supporting capacity ( LS
2
)
the equipment. Set complete with tiewrap clamps available on request.
Nylon Type Bright Zinc Plated Steel
309CU
Nylon Protection Cable
Covers are opening from inner and - Assembled Part.no S309S/3178MCE in relationship to the weight Type*** Chain with opening
outer radius. 5 75,5 100 for chain opening inner radius of the cables and hoses aluminium covers
Vertical separators are available. Pin contained per linear metre.
Part.no PG309H
40
30
20
3 Acceleration 40 m/s2
For higher requirements please consult our
162
169
100
100
109
116
75,5
75,5
200-250-300-350-400-500-600
200-250-300-350-400-500-600
5,47
5,58
309CU109
309CU116
*
*
4
3
2
1,5
The chain can be fixed frontally,
inner or outer radius. (Fig A)
Chain fixed outside the radius. (Fig B)
See end brackets mounting
variations page 31.
Separation System
To choose the separators see
page. 196
3
technical dept. 192 100 139 75,5 200-250-300-350-400-500-600 5,90 309CU139 * 1
232 100 179 75,5 200-250-300-350-400-500-600 6,47 309CU179 * 0 1 2 3 4 5 6 7 L 140 L 100
LS Max unsupported length
267 100 214 75,5 200-250-300-350-400-500-600 6,97 309CU214 * 27
2
LS N 293 100 240 75,5 200-250-300-350-400-500-600 7,35 309CU240 * 46
LS 317 100 264 75,5 200-250-300-350-400-500-600 7,68 309CU264 * 27
LS
2 R 50 25,5
343 100 290 75,5 200-250-300-350-400-500-600 8,04 309CU290 * LS ø10.5
2 157
100 367 100 314 75,5 200-250-300-350-400-500-600 8,39 309CU314 * ø10.5 15 50 15
M H
393 100 340 75,5 200-250-300-350-400-500-600 8,74 309CU340 *
417 100 364 75,5 200-250-300-350-400-500-600 9,09 309CU364 *
11 20
472 100 419 75,5 200-250-300-350-400-500-600 9,98 309CU419 * F A FA
80
Length of chain (L) 541 100 488 75,5 200-250-300-350-400-500-600 10,86 309CU488 *
The red marking in the 54
Half travel distance ( LS ) *Complete the code by inserting the value of the radius (R): Ex. 309CU 2 5 0
2 diagram area considers the
Chain F Chain F
plus length of curve (M) difference of weight between
Type mm Type mm
R H N M various widths of chains 309CU064 92 309CU064 50
L= LS + M mm mm mm mm assembled with nylon frames 309CU084 112 309CU084 70
2
200 506 350 830 every second pitch. 309CU109 137 309CU109 95
250 606 400 985 309CU116 144 309CU116 102
300 706 455 1145 For applications with LS2 309CU139 167 309CU139 125
350 806 500 1300 and weights not included in 309CU179 207 309CU179 165
the area of the diagram 309CU214 242 309CU214 200
400 906 555 1460
309CU240 268 309CU240 226
500 1106 650 1770 showing self-supporting 309CU264 292 309CU264 250
600 1306 750 2085 capacity, verify the possible 309CU290 318 309CU290 276
use of support rollers (see 309CU314 342 309CU314 300
page 30). 309CU340 368 309CU340 326
309CU364 392 309CU364 350
309CU419 447 309CU419 405
309CU488 516 309CU488 474
Nylon Type Bright Zinc Plated Steel
Part Numbers Type Part Numbers
Complete Set Assembled Complete Set Assembled
Chain End Brackets Chain End Brackets
Type Set Type Set
309 AN309C]]]*KM 309 A309CU]]]*KM **
Complete Set Unassembled Complete Set Unassembled
Chain End Brackets Chain End Brackets
Type Set Type Set
309 AN309C]]]*K 309 A309CU]]]*K **
For further information please
Tiewrap Clamp consult Brevetti Stendalto’s
Assembl. SFCT309S *KM Technical Office
Unassembl. SFCT309S *K
148 * Inner width (C)
149
** 1=Pos.1; 2=Pos.2; 3=Pos.3
*** Available on request in stainless steel
Nylon Cable Chains
Triple connecting Pivot
Sliding Series Pin which offers high
integrity in high Nylon separator. Cables can be laid
performance applications apart from each other
151
A
C
®
5 37 59
326SU
Nylon Sliding Cable Chain with opening frames
LS
163 59 118 37 107-150-200-250-300 1,48 326SU118 *
LS 173 59 128 37 107-150-200-250-300 1,49 326SU128 *
2
M R 181 59 136 37 107-150-200-250-300 1,54 326SU136 * 52
MOVING POINT
10 32 10 52
192 59 147 37 107-150-200-250-300 1,57 326SU147 * 10 32 10
H
200
206 59 161 37 107-150-200-250-300 1,61 326SU161 *
12
FIXED POINT 65 N
12
231 59 186 37 107-150-200-250-300 1,68 326SU186 * 6,5 6,5
F F
256 59 211 37 107-150-200-250-300 1,75 326SU211 *
30 30
Length of chain (L) 267 59 222 37 107-150-200-250-300 1,79 326SU222 *
281 59 236 37 107-150-200-250-300 1,83 326SU236 *
Half travel distance ( LS )
2 308 59 263 37 107-150-200-250-300 1,91 326SU263 * Chain F
plus length of curve (M) 317 59 272 37 107-150-200-250-300 1,93 326SU272 *
Type mm How to open the cover.
342 59 297 37 107-150-200-250-300 2,00 326SU297 * 326SU061 58
L= LS + M 368 59 323 37 107-150-200-250-300 2,06 326SU323 * 326SU072 69
2 326SU086 83
390 59 345 37 107-150-200-250-300 2,10 326SU345 * 326SU092 89
326SU096 93
418 59 373 37 107-150-200-250-300 2,21 326SU373 * 326SU106 103
R H N M 326SU111 108
*Complete the code by inserting the value of the radius (R): Ex. 326SU118 1 5 0
mm mm mm mm 326SU118 115
Chain equipped with nylon frame every pitch: complete the code by inserting the letter D. 326SU128 125
107 272 280 625 Ex. 326SU118150 D 326SU136 133
326SU147 144
150 358 430 1000 326SU161 158
200 458 605 1440 326SU186 183
326SU211 208
250 558 775 1875 326SU222 219
300 658 945 2315 326SU236 233
326SU263 260
326SU272 269
326SU297 294
326SU323 320
326SU345 342
326SU373 370
30 59 ®
326B
Nylon Sliding Cable Chain
with un-screwable aluminium rods
Inner height (D) 30 mm A Separator End Brackets
Strong double share Sideband & C - Unassembled Part.no S2000F The end brackets set allows the two ends of the chain to be
Frame construction with large
anti-friction triple-pin. The chain - Assembled
Pin
Part.no S2000FMC attached to the equipment. One set includes two pivoting end
brackets to be installed at the moving point and two standard
326B
incorporates large sliding-skid surfaces 3,5 30 59 steel end brackets to be installed at the fixed point.
Nylon Sliding Cable
to offer durability, even with high Part.no PG307 Chain with
speed/loads. The Alu-rod frames are Bright Zinc Plated Steel Bright Zinc Plated Steel un-screwable
un-screwable from inner and outer aluminium rods
Movable Type*** Type***
radius. As standard the chain comes
with frames every second link, on (moving point) (fixed point)
request with frames every link.
MOVING POINT
Separator systems are available.
A B C D R Weight/m Chain
Technical characteristics mm mm mm mm mm kg Part Number
115 59 75 30 107-150-200-250-300 1,75 326B075 *
Speed 2 m/s 140 59 100 30 107-150-200-250-300 1,80 326B100 *
3 Acceleration 4 m/s2
For higher requirements please consult our
190
240
59
59
150
200
30
30
107-150-200-250-300
107-150-200-250-300
1,90
2,05
326B150
326B200
*
*
FIXED POINT
3
technical dept. 290 59 250 30 107-150-200-250-300 2,15 326B250 *
340 59 300 30 107-150-200-250-300 2,25 326B300 *
C+40 59 ..... 30 107-150-200-250-300 326B ** Fig. A
Chain fixed outside the radius. (Fig A)
*Complete the code by inserting the value of the radius (R): Ex. 326B100 1 5 0
**Complete the code by inserting the value of the quote C and the radius (R): Ex. 326B 1 2 3 1 5 0
Chain equipped with aluminium rods every pitch: complete the code by inserting the letter D.
Ex. 326B100150 D L 126 L 63,5
R H N M
LS 52
LS
mm mm mm mm 10 32 10 52
2 10 32 10
M R 107 272 280 625
MOVING POINT
150 358 430 1000
12
H
12
200 200 458 605 1440 6,5 6,5
F F Supplementary movable
FIXED POINT 65 N 250 558 775 1875 30 30 separators.
300 658 945 2315
Length of chain (L)
Half travel distance ( LS )
2
Chain F
plus length of curve (M)
Type mm
L= LS + M 326B075 67
2 326B100 92
326B150 142
326B200 192
326B250 242
326B300 292 Steel laminar cover.
Special widths F=A-48
4
®
57 79
328SU
Nylon Sliding Cable Chain with opening frames
A
Inner height (D) 57 mm Separator End Brackets
A
Strong double share Sideband & C - Unassembled Part.no S308C The end brackets set allows the two ends of the chain to be
Frame construction with large
anti-friction triple-pin. The chain
- Assembled Part.no S308CMCI
for chain opening outer radius
attached to the equipment. One set includes two pivoting end
brackets to be installed at the moving point and two standard
328SU
incorporates large sliding-skid surfaces - Assembled Part.no S308CMCE Nylon Sliding Cable
to offer durability, even with high
4 D B 5 for chain opening inner radius steel end brackets to be installed at the fixed point. Chain with opening
speed/loads. Frames opening from 4 57 79 Strong-hold separator frames
for C > 200 mm
Bright Zinc Plated Steel Bright Zinc Plated Steel
inner radius and outer radius. As Movable Type*** Type*** (fixed point)
standard the chain comes with frames C - Unassembled Part.no S308SHF
every second link, on request with - Assembled Part.no S308SHMCI (moving point)
MOVING POINT
frames every link. Modular separator - Assembled Part.no S308SHMCE
systems are available. Pin Part.no PG328TP
A B C D R Weight/m Chain
Technical characteristics mm mm mm mm mm kg Part Number
119 79 61 57 150-180-200-230-280-400 2,70 328SU061 * FIXED POINT
Speed 3,5 m/s 130 79 72 57 150-180-200-230-280-400 2,73 328SU072 *
3 Acceleration 8 m/s2
For higher requirements please consult our
144
150
79
79
86
92
57
57
150-180-200-230-280-400
150-180-200-230-280-400
2,76
2,78
328SU086
328SU092
*
*
Fig. A
Separation System
To choose the separators see
page. 196
3
technical dept. 154 79 96 57 150-180-200-230-280-400 2,80 328SU096 * Chain fixed outside the radius. (Fig A)
164 79 106 57 150-180-200-230-280-400 2,82 328SU106 * L 156 L 78.5
169 79 111 57 150-180-200-230-280-400 2,82 328SU111 *
LS
176 79 118 57 150-180-200-230-280-400 2,82 328SU118 *
LS 186 79 128 57 150-180-200-230-280-400 2,86 328SU128 *
2
M R 194 79 136 57 150-180-200-230-280-400 2,89 328SU136 * 65 65
MOVING POINT
H 205 79 147 57 150-180-200-230-280-400 2,89 328SU147 * 10 45 10 10 45 10
250 15
219 79 161 57 150-180-200-230-280-400 2,94 328SU161 * 15
FIXED POINT 80 N
244 79 186 57 150-180-200-230-280-400 3,01 328SU186 *
8.5 8.5
269 79 211 57 150-180-200-230-280-400 3,06 328SU211 * F F
Length of chain (L) 280 79 222 57 150-180-200-230-280-400 3,08 328SU222 *
294 79 236 57 150-180-200-230-280-400 3,14 328SU236 *
Half travel distance ( LS )
43 43
2 321 79 263 57 150-180-200-230-280-400 3,20 328SU263 *
plus length of curve (M) 330 79 272 57 150-180-200-230-280-400 3,20 328SU272 * Chain F
How to open the cover.
355 79 297 57 150-180-200-230-280-400 3,29 328SU297 * Type mm
L= LS + M 381 79 323 57 150-180-200-230-280-400 3,31 328SU323 * 328SU061 44
2 328SU072 55
403 79 345 57 150-180-200-230-280-400 3,36 328SU345 * 328SU086 69
328SU092 75
431 79 373 57 150-180-200-230-280-400 3,49 328SU373 * 328SU096 79
R H N M 328SU106 89
*Complete the code by inserting the value of the radius (R): Ex. 328SU118 1 5 0 328SU111 94
mm mm mm mm Chain equipped with nylon frame every pitch: complete the code by inserting the letter D. 328SU118 101
150 379 425 955 Ex. 328SU118150 D 328SU128 111
328SU136 119
180 439 530 1220 328SU147 130
200 479 600 1395 328SU161 144
328SU186 169
230 539 700 1655 328SU211 194
328SU222 205
280 639 875 2095 328SU236 219
400 879 1285 3145 328SU263 246
328SU272 255
328SU297 280
328SU323 306
328SU345 328
328SU373 356
328B
Nylon Sliding Cable Chain
with un-screwable aluminium rods
Inner height (D) 48 mm A Separator End Brackets
Strong double share Sideband & C - Unassembled Part.no S3000F The end brackets set allows the two ends of the chain to be
Frame construction with large
anti-friction triple-pin. The chain - Assembled
Pin
Part.no S3000FMC attached to the equipment. One set includes two pivoting end
brackets to be installed at the moving point and two standard
328B
incorporates large sliding-skid surfaces 4,5 48 79 Nylon Sliding Cable
to offer durability, even with high Part.no PG328TP steel end brackets to be installed at the fixed point. Chain
speed/loads. The Alu-rod frames are Bright Zinc Plated Steel Bright Zinc Plated Steel with un-screwable
un-screwable from inner and outer aluminium rods
Movable Type*** Type***
radius. As standard the chain comes
with frames every second link, on (moving point) (fixed point)
request with frames every link.
Separator systems are available.
MOVING POINT
A B C D R Weight/m Chain
Technical characteristics mm mm mm mm mm kg Part Number
162 79 100 48 150-180-200-230-280-400 2,50 328B100 *
Speed 3,5 m/s 212 79 150 48 150-180-200-230-280-400 2,60 328B150 *
3 Acceleration 8 m/s2
For higher requirements please consult our
262
312
79
79
200
250
48
48
150-180-200-230-280-400
150-180-200-230-280-400
2,75
2,90
328B200
328B250
*
* FIXED POINT
3
technical dept. 362 79 300 48 150-180-200-230-280-400 3,00 328B300 *
C+62 79 ..... 48 150-180-200-230-280-400 328B **
*Complete the code by inserting the value of the radius (R): Ex. 328B100 1 5 0 Fig. A
**Complete the code by inserting the value of the quote C and the radius (R): Ex. 328B 1 2 3 1 5 0 Chain fixed outside the radius. (Fig A)
Chain equipped with aluminium rods every pitch: complete the code by inserting the letter D.
Ex. 328B100150 D
L 156 L 78.5
R H N M
LS mm mm mm mm 65 65
LS 10 45 10
2 10 45 10
M R 150 379 425 955 15
MOVING POINT 15
180 439 530 1220
H
250 200 479 600 1395 8.5 8.5 Supplementary movable
FIXED POINT 80 N 230 539 700 1655 F F
separators.
280 639 875 2095
400 879 1285 3145 43 43
Length of chain (L)
Half travel distance ( LS )
2
plus length of curve (M) Chain F
Type mm
L= LS + M
2 328B100 87
328B150 137
328B200 187
328B250 237
328B300 287
Steel laminar cover.
Special widths F=A-75
6 75,5 107
319ZE
Nylon Sliding Cable Chain with opening frames
3 Acceleration 13 m/s
For higher requirements please consult our
2
180
203
107
107
116
139
75,5
75,5
200-250-300-350-400-500
200-250-300-350-400-500
4,64
4,71
319ZE116
319ZE139
*
*
Separation System
To choose the separators see
page. 196
3
technical dept. 243 107 179 75,5 200-250-300-350-400-500 4,84 319ZE179 * Fig. A
278 107 214 75,5 200-250-300-350-400-500 4,95 319ZE214 * Chain fixed outside the radius. (Fig A)
304 107 240 75,5 200-250-300-350-400-500 5,04 319ZE240 *
328 107 264 75,5 200-250-300-350-400-500 5,11 319ZE264 * L 200 L 100
LS 354 107 290 75,5 200-250-300-350-400-500 5,19 319ZE290 * How to open the cover.
LS
2 378 107 314 75,5 200-250-300-350-400-500 5,27 319ZE314 *
M R
MOVING POINT
404 107 340 75,5 200-250-300-350-400-500 5,34 319ZE340 * 80 80
H
300 428 107 364 75,5 200-250-300-350-400-500 5,43 319ZE364 * 15 50 15 15 50 15
FIXED POINT 100 N 483 107 419 75,5 200-250-300-350-400-500 5,64 319ZE419 *
552 107 488 75,5 200-250-300-350-400-500 5,85 319ZE488 * 22 11 22
11
*Complete the code by inserting the value of the radius (R): Ex. 319ZE116 2 5 0 F F
Chain equipped with nylon frame every pitch: complete the code by inserting the letter D.
Length of chain (L) Ex. 319ZE116250 D 54 54
Half travel distance ( LS )
2
plus length of curve (M) Chain F
R H N M
Type mm
L= LS + M mm mm mm mm
319ZE064 40
2 200 506 595 1345
319ZE084 60
250 606 765 1780
319ZE109 85
300 706 940 2220 319ZE116 92
350 806 1110 2655 319ZE139 115
400 906 1280 3095 319ZE179 155
500 1106 1625 3970 319ZE214 190
319ZE240 216
319ZE264 240
319ZE290 266
319ZE314 290
319ZE340 316
319ZE364 340
319ZE419 395
319ZE488 464
Sliding skid
Bright Zinc Plated Steel
Type Part Numbers
Complete Set Assembled
Chain End Brackets
Type Set
319ZE... A319KM
Complete Set Unassembled For further information please
Chain End Brackets consult Brevetti Stendalto’s
Type Set Technical Office
319ZE... A319K
160 Version with frames mounted on every pitch. 161
*** Available on request in stainless steel
®
319B
Nylon Sliding Cable Chain
with un-screwable aluminium rods
Inner height (D) 70 mm A Separator End Brackets
Strong double share Sideband & C - Unassembled Part.no S309C The end brackets set allows the two ends of the chain to be attached to the equipment. One
Frame construction with large
anti-friction triple pin. The chain - Assembled
Pin
Part.no S309CMC set includes two pivoting end brackets to be installed at the moving point and two standard
steel end brackets to be installed at the fixed point.
319B
features screwed-on interchangeable 10 70 107 Nylon Sliding
sliding skids to offer durability even Part.no PG329 Bright Zinc Plated Steel Bright Zinc Plated Steel Cable Chain
with high speed and loads. Aluminium Sliding skid Movable Type*** Type*** with un-screwable
rods are removable from inner and Part.no PAT329 aluminium rods
(moving point) (fixed point)
outer radius side. As standard the
chain comes with rods every second
link, on request with rods every link. MOVING POINT
Separation systems are available.
A B C D R Weight/m Chain
Technical characteristics mm mm mm mm mm kg Part Number
164 107 100 70 200-250-300-350-400-500 4,25 319B100 *
Speed 4 m/s Supplementary movable
214 107 150 70 200-250-300-350-400-500 4,45 319B150 *
3 Acceleration 13 m/s
For higher requirements please consult our
2
264
314
107
107
200
250
70
70
200-250-300-350-400-500
200-250-300-350-400-500
4,60
4,75
319B200 *
319B250 *
FIXED POINT separators.
3
technical dept. 364 107 300 70 200-250-300-350-400-500 4,90 319B300 *
464 107 400 70 200-250-300-350-400-500 5,25 319B400 *
C+64 107 ..... 70 200-250-300-350-400-500 319B ** Fig. A
Chain fixed outside the radius. (Fig A)
*Complete the code by inserting the value of the radius (R): Ex. 319B150 2
Where: 2=200; 3=250; 4=300; 5=350; 6=400; 7=500 Version with aluminium
**Complete the code by inserting the value of the quote C and the radius (R): Ex. 319B 1 2 3 2 draw plates
Chain equipped with aluminium rods every pitch: complete the code by inserting the letter D. L 200 L 100
Ex. 319B1502 D
80 80
R H N M 15 50 15 15 50 15
LS mm mm mm mm
LS
22
2 200 506 595 1345 22
M R 11 11
MOVING POINT
250 606 765 1780 F F
H
300 300 706 940 2220 On request available with
FIXED POINT 100 N 350 806 1110 2655 54 54 aluminium draw plates
400 906 1280 3095
Example Part Number:
Length of chain (L) 500 1106 1625 3970 319T * **
Chain F
Half travel distance ( LS ) Type mm
2 * Inner width (C)
plus length of curve (M) 319B100 76 ** Bending radius (R)
319B150 126
L= LS + M 319B200 176
2 319B250 226
319B300 276
319B400 376
Special widths F=A-88
70 107
329B
Nylon Sliding Cable Chain
with un-screwable aluminium rods
Inner height (D) 70 mm A Separator End Brackets
Strong double share Sideband & C The end brackets set allows the two ends of the chain to be
- Unassembled Part.no S309C
Frame construction with large
anti-friction triple-pin. The chain 10 70 107 - Assembled
Pin
Part.no S309CMC attached to the equipment. One set includes two pivoting end
brackets to be installed at the moving point and two standard
329B
incorporates large sliding-skid surfaces Nylon Sliding Cable
to offer durability, even with high Part.no PG329 steel end brackets to be installed at the fixed point. Chain with un-screwable
speed/loads. The Alu-rod frames are Bright Zinc Plated Steel Bright Zinc Plated Steel aluminium rods
un-screwable from inner and outer Movable Type*** Type***
radius. As standard the chain comes
with frames every second link, on (moving point) (fixed point)
request with frames every link.
Separator systems are available.
MOVING POINT
A B C D R Weight/m Chain
Technical characteristics mm mm mm mm mm kg Part.no
164 107 100 70 150-200-250-300-350-400-500-600 4,25 329B100]]]*
Speed 3 m/s 214 107 150 70 150-200-250-300-350-400-500-600 4,45 329B150]]]*
3 Acceleration 13 m/s2
For higher requirements please consult our
264
314
107
107
200
250
70
70
150-200-250-300-350-400-500-600
150-200-250-300-350-400-500-600
4,60
4,75
329B200]]]*
329B250]]]* FIXED POINT
3
technical dept. 364 107 300 70 150-200-250-300-350-400-500-600 4,90 329B300]]]*
464 107 400 70 150-200-250-300-350-400-500-600 5,25 329B400]]]*
C+64 107 ..... 70 150-200-250-300-350-400-500-600 329B]]]]** Fig. A
Chain fixed outside the radius. (Fig A)
*Complete the code by inserting the value of the radius (R): Ex. 329B150200
**Complete the code by inserting the value of the quote C and the radius (R): Ex. 329B123200
Chain equipped with aluminium rods every pitch: complete the code by inserting the letter D.
L L 210 210 L L
100 100
Ex. 329B150200D
80 80 80 80
R H N M Supplementary movable
15 50 15 15 50 15 15 50 15 15 50 15
LS 30 30 22 22
separators.
LS
mm mm mm mm
2 150 406 415 905
M R 11 11 11 11
MOVING POINT
200 506 595 1345 F F F1 F1
H
300 250 606 765 1780
FIXED POINT 100 N 300 706 940 2220 53 53 53 53
350 806 1110 2655
Length of chain (L) 400 906 1280 3095
500 1106 1625 3970
Half travel distance ( LS ) 600 1306 1965 4845
Chain F Chain F1
2 Type mm Type mm
plus length of curve (M) 329B100 76 329B100 87
329B150 126 329B150 137
L= LS + M 329B200 176 329B200 187
2
329B250 226 329B250 237
329B300 276 329B300 287
329B400 376 329B400 387
Special widths F=A-88 Special widths F=A-77
329SU
Nylon Sliding Cable Chain
with opening frames
Inner height (D) 75,5 mm A Separator End Brackets
Strong double share Sideband & CA - Unassembled Part.no S309S/3178 The end brackets set allows the two ends of the chain to be attached to the equipment. One
Frame construction with large C - Assembled* Part.no S309S/3178MCI
anti-friction triple-pin. The chain - Assembled** Part.no S309S/3178MCE
set includes two pivoting end brackets to be installed at the moving point and two standard
steel end brackets to be installed at the fixed point.
329SU
incorporates large sliding-skid surfaces Strong-hold separator Nylon Sliding Cable
to offer durability, even with high 5 75,5
75,5 107 6
100,5
for C > 250 mm Bright Zinc Plated Steel Bright Zinc Plated Steel Chain with opening
speed/loads. Frames are opening from 5 - Unassembled Part.no S309HOFL Movable Type*** Type*** frames
inner radius or outer radius. - Assembled* Part.no S309HOFLMC
S309HOFL Pin Part.no PG329 (moving point) (fixed point)
Vertical separators are available
* for chain opening outer radius MOVING POINT
** for chain opening inner radius
A B C D R Weight/m Chain
Technical characteristics mm mm mm mm mm kg Part Number
148 107 84 75,5 150-200-250-300-350-400-500-600 4,25 329SU084 *
FIXED POINT
Speed 3 m/s 173 107 109 75,5 150-200-250-300-350-400-500-600 4,33 329SU109 *
3 Acceleration 13 m/s
For higher requirements please consult our
2
180
203
107
107
116
139
75,5
75,5
150-200-250-300-350-400-500-600 4,36 329SU116
150-200-250-300-350-400-500-600 4,43 329SU139
*
*
Separation System
To choose the separators see
page. 196
3
technical dept. 243 107 179 75,5 150-200-250-300-350-400-500-600 4,56 329SU179 * Fig. A
278 107 214 75,5 150-200-250-300-350-400-500-600 4,67 329SU214 * Chain fixed outside the radius. (Fig A) How to open the cover
304 107 240 75,5 150-200-250-300-350-400-500-600 4,76 329SU240 * L L 210 210 L L
100 100
328 107 264 75,5 150-200-250-300-350-400-500-600 4,83 329SU264 *
LS 354 107 290 75,5 150-200-250-300-350-400-500-600 4,91 329SU290 *
LS
2 378 107 314 75,5 150-200-250-300-350-400-500-600 4,99 329SU314 *
M R 80 80 80 80
MOVING POINT
404 107 340 75,5 150-200-250-300-350-400-500-600 5,06 329SU340 * 15 50 15 15 50 15 15 50 15 15 50 15
H
300 428 107 364 75,5 150-200-250-300-350-400-500-600 5,15 329SU364 * 30 30 22 22
FIXED POINT 100 N 483 107 419 75,5 150-200-250-300-350-400-500-600 5,36 329SU419 *
11 11 11 11
552 107 488 75,5 150-200-250-300-350-400-500-600 5,57 329SU488 * F F F1 F1
*Complete the code by inserting the value of the radius (R): Ex. 329SU116 2 5 0
Chain equipped with nylon frame every pitch: complete the code by inserting the letter D. 54 54 54 54
Length of chain (L)
Ex. 329SU116250 D
Half travel distance ( LS )
2 Chain F Chain F1
plus length of curve (M) Type mm Type mm
R H N M 329SU084 60 329SU084 71
L= LS + M mm mm mm mm 329SU109 85 329SU109 96
2
150 406 415 905 329SU116 92 329SU116 103
200 506 595 1345 329SU139 115 329SU139 126
250 606 765 1780 329SU179 155 329SU179 166
300 706 940 2220 329SU214 190 329SU214 201
329SU240 216 329SU240 227
350 806 1110 2655
329SU264 240 329SU264 251
400 906 1280 3095
329SU290 266 329SU290 277
500 1106 1625 3970 329SU314 290 329SU314 301
600 1306 1965 4845 329SU340 316 329SU340 327
329SU364 340 329SU364 351
329SU419 395 329SU419 406
329SU488 464 329SU488 475
75,5 107
®
5
329CD
Nylon Sliding Cable Chain
with opening aluminium covers
Inner height (D) 75,5 mm A Separator End Brackets
Strong double share Sideband & C The end brackets set allows the two ends of the chain to be attached to the equipment. One
- Unassembled Part.no S309S/3178
Frame construction with large
anti-friction triple-pin. The chain - Assembled Part.no S309S/3178MCI
for chain opening outer radius
set includes two pivoting end brackets to be installed at the moving point and two standard
steel end brackets to be installed at the fixed point.
329CD
incorporates large sliding-skid surfaces Nylon Sliding Cable
to offer durability, even with high 5 75,5 107 - Assembled Part.no S309S/3178MCE Bright Zinc Plated Steel Bright Zinc Plated Steel Chain with opening
speed/loads. Aluminium covers are for chain opening inner radius aluminium covers
Movable Type*** Type***
opening from inner radius or outer Pin (moving point) (fixed point)
radius. Part.no PG329
Vertical separators are available
MOVING POINT
A B C D R Weight/m Chain
Technical characteristics mm mm mm mm mm kg Part Number
148 107 84 75,5 200-250-300-350-400-500-600 5,70 329CD084 *
Speed 3 m/s 173 107 109 75,5 200-250-300-350-400-500-600 6,11 329CD109 * FIXED POINT
3 Acceleration 13 m/s2
For higher requirements please consult our
180
203
107
107
116
139
75,5
75,5
200-250-300-350-400-500-600
200-250-300-350-400-500-600
6,24
6,62
329CD116
329CD139
*
*
Separation System
To choose the separators see
page. 196
3
technical dept. 243 107 179 75,5 200-250-300-350-400-500-600 7,33 329CD179 * Fig. A
278 107 214 75,5 200-250-300-350-400-500-600 7,96 329CD214 * Chain fixed outside the radius. (Fig A)
304 107 240 75,5 200-250-300-350-400-500-600 8,40 329CD240 * L L 210 210 L L
100 100
328 107 264 75,5 200-250-300-350-400-500-600 8,80 329CD264 *
LS 354 107 290 75,5 200-250-300-350-400-500-600 9,26 329CD290 *
LS
2 378 107 314 75,5 200-250-300-350-400-500-600 9,68 329CD314 *
M R 80 80 80 80
MOVING POINT
404 107 340 75,5 200-250-300-350-400-500-600 10,12 329CD340 * 15 50 15 15 50 15 15 50 15 15 50 15
H
300 428 107 364 75,5 200-250-300-350-400-500-600 10,55 329CD364 * 30 30 22 22
FIXED POINT 100 N 483 107 419 75,5 200-250-300-350-400-500-600 11,73 329CD419 *
11 11 11 11
552 107 488 75,5 200-250-300-350-400-500-600 12,91 329CD488 * F F F1 F1
*Complete the code by inserting the value of the radius (R): Ex. 329CD116 2 5 0
53 53 53 53
Length of chain (L)
Half travel distance ( LS ) R H N M
2 Chain F Chain F1
plus length of curve (M) mm mm mm mm Type mm Type mm How to open the cover
200 506 595 1345 329CD084 60 329CD084 71
L= LS + M 250 606 765 1780 329CD109 85 329CD109 96
2
300 706 940 2220 329CD116 92 329CD116 103
350 806 1110 2655 329CD139 115 329CD139 126
400 906 1280 3095 329CD179 155 329CD179 166
500 1106 1625 3970 329CD214 190 329CD214 201
600 1306 1965 4845 329CD240 216 329CD240 227
329CD264 240 329CD264 251
329CD290 266 329CD290 277
329CD314 290 329CD314 301
329CD340 316 329CD340 327
329CD364 340 329CD364 351
329CD419 395 329CD419 406
329CD488 464 329CD488 475
5 75,5 106,5
478MU
Nylon Cable Chain with opening frames
A B C D R Weight/m Chain
Technical characteristics mm mm mm mm mm kg Part number
112 106,5 74 75,5 180-200-250-300-350-400 3,70 478MU074 *
Speed 3 m/s 132 106,5 94 75,5 180-200-250-300-350-400 3,80 478MU094 * FIXED POINT
3 Acceleration 8 m/s2
For higher requirements please consult our
157
164
106,5
106,5
119
126
75,5
75,5
180-200-250-300-350-400
180-200-250-300-350-400
3,85
3,90
478MU119
478MU126
*
*
Fig. A
Separation System
To choose the separators see
page. 196
3
technical dept. 187 106,5 149 75,5 180-200-250-300-350-400 3,95 478MU149 * Chain fixed outside the radius. (Fig A)
227 106,5 189 75,5 180-200-250-300-350-400 4,05 478MU189 *
262 106,5 224 75,5 180-200-250-300-350-400 4,15 478MU224 * LL 105
105 LL 105
105
288 106,5 250 75,5 180-200-250-300-350-400 4,25 478MU250 *
312 106,5 274 75,5 180-200-250-300-350-400 4,30 478MU274 *
LS
338 106,5 300 75,5 180-200-250-300-350-400 4,37 478MU300 *
MOVING POINT LS 7070 7070
2 362 106,5 324 75,5 180-200-250-300-350-400 4,45 478MU324 * 1515 4040 1515
M R 1515 4040 1515
388 106,5 350 75,5 180-200-250-300-350-400 4,55 478MU350 *
2222 2222
H 412 106,5 374 75,5 180-200-250-300-350-400 4,60 478MU374 *
300
467 106,5 429 75,5 180-200-250-300-350-400 4,80 478MU429 * 1111 1111
105 F FA A F FA A
FIXED POINT N 536 106,5 498 75,5 180-200-250-300-350-400 5,00 478MU498 *
*Complete the code by inserting the value of the radius (R): Ex. 478MU119 1 5 0 4040 4040
Chain equipped with nylon frame every pitch: complete the code by inserting the letter D.
478MU119150 D
Length of chain (L)
Chain F
Half travel distance ( LS ) Type mm
2 478MU074 35
plus length of curve (M) 478MU094 55
How to open the cover.
478MU119 80
478MU126 87
L= LS + M 478MU149 110
2 478MU189 150
478MU224 185
478MU250 211
R H N M 478MU274 235
mm mm mm mm 478MU300 261
478MU324 285
180 466,5 495 1155 478MU350 311
478MU374 335
200 506,5 570 1330 478MU467 390
250 606,5 745 1765 478MU498 459
300 706,5 920 2205
Bright Zinc Plated Steel
350 806,5 1090 2640
Type Part Numbers
400 906,5 1265 3080
Complete Set Assembled
Chain End Brackets
Type Set
478MU A478M *KM
Complete Set Unassembled
Chain End Brackets
Type Set
478MU.. A478M *K
Tiewrap Clamp
Part Number
For further information please
Assembled CFC478M]]]*KM consult Brevetti Stendalto’s
Unassembled CFC478M]]]*K Technical Office
* Inner width (C)
170 Version with frames mounted on every pitch.
*** Available on request in stainless steel 171
A
C
5 75,5 106,5
478PU
Nylon Cable Chain with opening frames
MOVING POINT
A B C D R Weight/m Chain
Technical characteristics mm mm mm mm mm kg Part number
112 106,5 74 75,5 180-200-250-300-350-400 4,60 478PU074 *
Speed 3 m/s 132 106,5 94 75,5 180-200-250-300-350-400 4,80 478PU094 *
3 3
FIXED POINT
Acceleration 8 m/s2 157 106,5 119 75,5 180-200-250-300-350-400 5,10 478PU119 * Separation System
164 106,5 126 75,5 180-200-250-300-350-400 5,15 478PU126 * To choose the separators see
For higher requirements please consult our page. 196
technical dept. 187 106,5 149 75,5 180-200-250-300-350-400 5,40 478PU149 * Fig. A
227 106,5 189 75,5 180-200-250-300-350-400 5,80 478PU189 * Chain fixed outside the radius. (Fig A)
262 106,5 224 75,5 180-200-250-300-350-400 6,20 478PU224 * L L 105
105 105
105
L L
288 106,5 250 75,5 180-200-250-300-350-400 6,50 478PU250 *
312 106,5 274 75,5 180-200-250-300-350-400 6,75 478PU274 *
LS
338 106,5 300 75,5 180-200-250-300-350-400 7,05 478PU300 *
MOVING POINT LS 7070 7070
2 362 106,5 324 75,5 180-200-250-300-350-400 7,30 478PU324 * 1515 40401515
M R 1515 40401515
388 106,5 350 75,5 180-200-250-300-350-400 7,55 478PU350 *
H 2222 2222
300 412 106,5 374 75,5 180-200-250-300-350-400 7,85 478PU374 *
467 106,5 429 75,5 180-200-250-300-350-400 8,50 478PU429 * 1111 1111
105 F FA A F FA A
FIXED POINT N 536 106,5 498 75,5 180-200-250-300-350-400 9,20 478PU498 *
*Complete the code by inserting the value of the radius (R): Ex. 478PU119 1 5 0 4040 4040
5 60,5 96
60PU/R1
Nylon Cable Chain with opening frames
Inner height (D) 60,5 mm AA End Brackets
Sideband & Frame construction with CC
Separator The end brackets set allows the two ends of the chain to be attached to the equipment. One
large anti-friction single-pin. - Unassembled Part.no S60SMF
Frames opening from inner and outer - Assembled Part.no S60SMFMC
set includes two pivoting end brackets to be installed at the moving point and two standard
steel end brackets to be installed at the fixed point.
60PU
radius. Strong-hold separator Nylon Cable Chain
5 75,560,5
100,596 6 Bright Zinc Plated Steel Bright Zinc Plated Steel with opening frames
As standard the chain comes with 5 for C > 250 mm
frames every second link, on request - Unassembled Part.no S60HOFL Movable Type*** Type*** (moving point) (fixed point)
with frames every link. - Assembled Part.no S60HOFLMC MOVING POINT
Vertical separators are available Pin
Part.no PNE60-PNI60
20
18
LS
345 96 291 60,5 200-250-300-400 5,99 60PU291 *
89
49
LS 369 96 315 60,5 200-250-300-400 6,07 60PU315 *
2
M R 395 96 341 60,5 200-250-300-400 6,17 60PU341 *
MOVING POINT 65
20
10 45 10 8,5
H 419 96 365 60,5 200-250-300-400 6,26 60PU365 *
250
18
445 96 391 60,5 200-250-300-400 6,34 60PU391 *
FIXED POINT 90 N
469 96 415 60,5 200-250-300-400 6,43 60PU415 *
524 96 470 60,5 200-250-300-400 6,75 60PU470 * 8,5
F A+4
43
Length of chain (L) 593 96 539 60,5 200-250-300-400 7,08 60PU539 *
4
Half travel distance ( LS )
*Complete the code by inserting the value of the radius (R): Ex. 60PU115 2 5 0
2 Chain equipped with nylon frame every pitch: complete the code by inserting the letter D.
plus length of curve (M) 60PU115250 D Chain F
Type mm
L= LS + M 60PU115 95
2 60PU135 115
60PU160 140
R H N M 60PU167 147
mm mm mm mm 60PU190 170
200 490 715 1625 60PU230 210 Separation System
60PU265 245 To choose the separators
250 590 925 2130 see page. 196
300 690 1130 2635 60PU291 271
60PU315 295
400 890 1550 3645
60PU341 321
60PU365 345 How to open the cover.
60PU391 371
60PU415 395
60PU470 450
60PU539 519
Bright Zinc Plated Steel
Type Part Numbers
Complete Set Assembled
Chain End Brackets
Type Set
60PU... A60PKM]*
Complete Set Unassembled
Chain End Brackets
Type Set For further information please
consult Brevetti Stendalto’s
60PU... A60PK]*
Technical Office
* 1=Pos.1; 2=Pos.2; 3=Pos.3
174 Version with frames mounted on every pitch. *** Available on request in stainless steel 175
A
C
®
8 80,5 117
80PU/R1
Nylon Cable Chain with opening frames
Inner height (D) 80,5 mm AA Separator End Brackets
Strong double share Sideband & C - Unassembled Part.no S80F The end brackets set allows the two ends of the chain to be attached to the equipment. One
Frame construction with large - Assembled* Part.no S80FMCI
anti-friction single pin. The chain - Assembled** Part.no S80FMCE
set includes two pivoting end brackets to be installed at the moving point and two standard
steel end brackets to be installed at the fixed point.
80PU
features screwed-on interchangeable 8 80,5
D B117 6 Strong-hold separator Nylon Cable Chain
8 with opening frames
sliding skids to offer durability even for C > 250 mm Bright Zinc Plated Steel Bright Zinc Plated Steel
with high speed and loads. Frames - Unassembled Part.no SM80HOF6L Movable Type*** Type*** (fixed point)
opening from inner and outer radius. SM80HOF6L - Assembled Part.no SM80HOF6LMC
C (moving point) Separation System
As standard the chain comes with Pin Part.no PNE80-PNI80 MOVING POINT To choose the separators
frames every second link, on request Sliding skid see page. 196
with frames every link. Part.no PAT80
Separation systems are available. * for chain opening outer radius
** for chain opening inner radius 80R1
Nylon cables chain with
A B C D R Weight/m Chain FIXED POINT I-Roller system
Technical characteristics mm mm mm mm mm kg Part number
3 Speed
Acceleration
5 m/s
13 m/s2
195
215
240
117
117
117
115
135
160
80,5
80,5
80,5
200-250-300-400-500-700
200-250-300-400-500-700
200-250-300-400-500-700
8,60
8,67
8,73
80PU115
80PU135
80PU160
*
*
* Fig. A
3
For higher requirements please consult our
247 117 167 80,5 200-250-300-400-500-700 8,75 80PU167 * Chain fixed outside the radius. (Fig A)
technical dept. 270 117 190 80,5 200-250-300-400-500-700 8,80 80PU190 *
310 117 230 80,5 200-250-300-400-500-700 8,93 80PU230 * L 145 L 130
20
70 15
345 117 265 80,5 200-250-300-400-500-700 9,05 80PU265 *
LS
100
LS 371 117 291 80,5 200-250-300-400-500-700 9,11 80PU291 *
2
MOVING POINT
M R 395 117 315 80,5 200-250-300-400-500-700 9,17 80PU315 * 80
11
15
H 421 117 341 80,5 200-250-300-400-500-700 9,25 80PU341 * 20 40 20
300
21
445 117 365 80,5 200-250-300-400-500-700 9,33 80PU365 *
FIXED POINT 110 N 471 117 391 80,5 200-250-300-400-500-700 9,40 80PU391 *
495 117 415 80,5 200-250-300-400-500-700 9,47 80PU415 * 11 F A+8
Length of chain (L) 550 117 470 80,5 200-250-300-400-500-700 9,75 80PU470 *
619 117 539 80,5 200-250-300-400-500-700 10,00 80PU539 *
6
Half travel distance ( LS )
55
2 *Complete the code by inserting the value of the radius (R): Ex. 80PU115 2 5 0
plus length of curve (M) Chain equipped with nylon frame every pitch: complete the code by inserting the letter D.
80PU115250 D Chain F
Type mm
L= LS + M
2 80PU115 92
80PU135 112 How to open the cover.
R H N M 80PU160 137
80PU167 144
mm mm mm mm
80PU190 167
200 510 695 1555 80PU230 207
250 610 905 2060 80PU265 242
300 710 1115 2565 80PU291 268
400 910 1530 3575 80PU315 292
500 1110 1945 4580 80PU341 318
700 1510 2785 6600 80PU365 342
80PU391 368
80PU415 392
80PU470 447
80PU539 516
Bright Zinc Plated Steel
Type Part Numbers
Complete Set Assembled
Chain End Brackets
Type Set
80PU... A80PKM]* Sliding skid
Complete Set Unassembled
Chain End Brackets For further information please
Type Set consult Brevetti Stendalto’s
Technical Office
80PU... A80PK]*
176 Version with frames mounted on every pitch. * 1=Pos.1; 2=Pos.2; 3=Pos.3 177
*** Available on request in stainless steel
®
Guide Channel
445-660A-770A-326-328-20P-30P-60-H45-H57
Special guide channel allows the use of Empty Guide Section
the chain for long travel distance. Section A-A
Available in galvanised steel and, on Part Number Chain H2 H1
request, in stainless steel. CS326… mm mm
How to order 445 160 64
A1 Chain part number 326B100150 160 59
660A
S Guide channel 160 59
part number CS326B100 326
H2
770A 160 79
Single Chain Application
328 160 79
LS
20
LS LS 25 x 10 60 190 96
2 2 A2 H57 190 96
R 160 59
20P
A B 250 250 125 30P 190 81,5
H45 160 79
A B Guide with Nylon Rollers
3 GUIDE EMPTY SECTION GUIDE WITH NYLON ROLLERS Section B-B
Part Number
Chain S
mm
A1
mm
A2
mm
3
CR326… 445 1,5 A+4 A+87
How to order H45 1,5 A+4 A+87
Chain part number 326B100150 H57 1,5 A+4 A+87
Double Chain Application A1
Guide channel 1,5 A+4 A+87
S 660A
part number CR326B100
326 1,5 A+4 A+87
H2
LS
LS LS H1 770A 1,5 A+4 A+87
2 2 328 1,5 A+4 A+87
20
25 x 10
R A+87
A2 60 1,5 A+4
A A 20P 1,5 A+4 A+87
30P 2 A+4 A+88
A A
GUIDE EMPTY SECTION
Guide with Steel Sliding Plate
Section B-B
Part Number
CA326…
How to order
Chain part number 326B100150
A1
S Guide channel
Channel guide is available in assembling kit part number CA326B100
H2
composed by:
side walls 2 m standard length H1
joining and support plates 25 x 10
20
fixing screws
base A2
sliding device (nylon wheel/steel or plastic plate)
H1
FIXING PLATE
20
25 x 10
SIDE WALL
A2
JOINING AND
SUPPORT PLATE For further information please
BASE consult Brevetti Stendalto’s
Technical Office
178 179
®
Guide Channel
478-319-329-80-35P-35PC-40P-H80-H110
Special guide channel allows the use of Empty Guide Section
the chain for long travel distance Section A-A
Available in galvanised steel and, on Part Number Chain H2 H1
CS319… mm mm
request, in stainless steel.
How to order 250 107
A1 319
Chain part number 319B100200 250 107
S 329
Guide channel 250 117
part number CS319B100 80
H2
35P 250 107
Single Chain Application
35CP 250 107
LS
LS LS 40 325 161,5
20
25 x 10
2 2 478 250 107
A2
R 250 117
H80
A B 250 250 125 H110 324 155
Chain S A1 A2
A B
H2
LS 478 1,5 A+8 A+91
LS LS H1 A+92
H80 2 A+8
2 2
25 x 10 H110 2,5 A+8 A+93
20
R
A2
A A
A A
GUIDE EMPTY SECTION
Guide with Steel Sliding Plate
Section B-B
Part Number
CA319…
How to order
A1
Chain part number 319B100200
S
Guide channel
Channel guide is available in assembling kit part number CA319B100
H2
composed by:
side walls 2 m standard length H1
joining and support plates
20
fixing screws 25 x 10
base A2
sliding device (nylon wheel/steel or plastic plate)
H1
FIXING PLATE
20
25 x 10
SIDE WALL
JOINING AND A2
SUPPORT PLATE
For further information please
BASE
consult Brevetti Stendalto’s
Technical Office
180 181
®
20
2 2 25 x 10 mm mm
R H2 Guide channel
A2
part number CSA60-391 326 A+4 A+114
A B 328 A+4 A+114
A1
20
25 x 10
60 A+4 A+114
A2
A B H2 250 H57 A+4 A+114
Guide with Nylon Rollers
3 CANGUIDE EMPTY SECTION GUIDE WITH SLIDING PLATE SECTION
Section B-B 250
250
3
20
25 x 10
A1
125
250
Part Number
A2
250
CRA326…
250 How to order
H2
H1
A1
125 Chain part number 326B100150
Double Chain Application Guide channel
250
20
25 x 10 part number CRA326B100
H2 250
LS A2
H1 250
LS LS 125 CRA60...
2 2 A1
20
25 x 10 Chain part number 60PI391250
R
A2 250 Guide channel
A A H2 250 part number CRA60-391
H1
250
125
A A
20
25 x 10 A1 250
250
GUIDE EMPTY SECTION
Guide with Plastic Sliding
A2
250
Plate
Section
H2 B-B
H1 125
A1
250
Part Number
20
25 x 10 CPA326…
H2 250
A2
H1 250 How to order
A1
125 Chain part number 326B100150
20
25 x 10
Guide channel
A2 part number CPA326B100
Channel guide is available in kit composed by: H2
- side walls 2 m standard length H1
- joining and fixing plates CPA60...
20
25 x 10 Chain part number 60PI391250
- fixing screws
- base profile A2 Guide channel
- supporting parts ( nylon wheels or plastic support plate ) part number CPA60-391
2000
JOINING PLATE
182 183
Nylon Cable Chains
Robot Series Double pin; high strength
in every condition
Quickly removable
covers for easy Support guide for a correct
installation of the functioning of the chain
cables/hoses
Internal separations
for the subdivisions of
the cables/hoses
185
®
495
Circular Nylon Cable Chain
with removable frames
Inner height (D) 35 mm A Pin Steel End Brackets Support Guide
Double share Sideband & Frame C Part.no PG305 The end brackets set, containing two steel For correct functioning of the chain it is
construction with large anti-friction
single-pin. 35 45
plates screwed to the links, allows the two
ends of the chain to be attached to the
necessary that the installation is done in a
specific position.
495
Circular Nylon Cable
Frames removable from inner radius. equipment. The end brackets are installed For this reason Brevetti Stendalto has Chain
in one position offering the possibility of observed and created a support guide which with removable
0
ø2 attaching the chain externally. (Fig. A) can do this. (Fig. B) frames
For particular applications it is possible to
create support guides with attachment plates
and special dimensions.
A B C D R Weight/pitch Chain
Technical characteristics mm mm mm mm mm kg Part Number
69 45 45 35 100 0,100 495
Speed 180°/s
3 Acceleration 180°/s2
For higher requirements please consult our De
R Di De
220°
3
technical dept.
335
mm mm mm 5
Di 6.
00
100 600 755 ø
R3
5
33
R
85
R3
R Length of Chain
25
2.5
Chain Degrees No R 28
Part Numbers of Rotation of Pitches
45 5
ø6
R 305
30
495 90 13
.5
R
495 180 18 76
R3
4
495 270 22 R 345 100
SUP495
495 360 26
Fig. A Fig. B
186 187
®
500 NE
CH W
Circular Nylon Cable Chain AIN
Inner height (D) 30 mm A Separator Steel End Brackets Support Guide
Single link construction. C - Unassembled Part.no S500 The end brackets set, containing two steel For correct functioning of the chain it is
Frames opening from inner radius.
Internal separation available.
- Assembled Part.no S500MC plates screwed to the links, allows the two
ends of the chain to be attached to the
necessary that the installation is done in a
specific position.
500
Circular Nylon Cable
equipment. The end brackets are installed For this reason Brevetti Stendalto has Chain
4
30 43 in one position offering the possibility of observed and created a support guide which
attaching the chain externally. (Fig. A) can do this. (Fig. B)
MIN. 11 For particular applications it is possible to
create support guides with attachment plates
and special dimensions.
A B C D R Weight/pitch Chain
Technical characteristics mm mm mm mm mm kg Part Number
86,5 43 68,5 30 100 0,086 50010
Speed 180°/s 86,5 43 68,5 30 150 0,086 50020 220 °
3 Acceleration 180°/s2
For higher requirements please consult our
3
technical dept. R Di De
De H
mm mm mm ø9
Di
0
100 630 830
30
5
37
R.
150 630 830 R.
R. 415
R 12 R. 278
Length of Chain
37 5
32
5
R.
ø1
100
Chain Degrees No R. 375
0
110
R.
Part Numbers of Rotation of Pitches
4 R. 325
50010 90 13
50010 180 17 SUP500
50010 270 21 Fig. A Fig. B
50010 360 26
50020 90 15
50020 180 19 Chain H For applications with rotations exceeding
50020 270 24 Type 200° it is necessary to use the appropriate
50020 360 28 50010 330 accessories for supporting the cable chain.
50020 410 (see page 29).
188 189
A
C
®
4
46 55
510TN-515TN 26 27 27
3 Acceleration 180°/s
For higher requirements please consult our
2
132 55 88 46 175 0,200 515TN 400 3
technical dept. De Chain R Di De
ø9
Di Part Number mm mm mm
510TN 125 940 1220 45 5
25 R. 25
515TN 175 1060 1340 R. 5
R. 43
0 R. 625
.
R
0
50
ø1
R. 580 R.
0
20 20 645
58
Length of Chain R. 175
R
0
110
Chain Degrees No 20 80 20 R. 50
SUP510
Part Numbers of Rotation of Pitches
510TN 90 13 Fig. A Fig. B
510TN 180 17
510TN 270 22
515TN
510TN 360 27
220°
515TN 90 17
515TN 180 23
515TN 270 29 465
515TN 360 35
ø9
0
R. 68
R. 585
18 0 R. 520
R. 49
5
10 55 5
R. 555 R . 63
10 20 700 R 165
R.
110
515TN 20 R. 635 SUP515
Fig. A Fig. B
For applications with rotations exceeding
Steel End Brackets Part Numbers 200° it is necessary to use the appropriate
accessories for supporting the cable chain.
Complete Set Assembled (see page 29).
Chain End Brackets
Type Set
510TN A510TNKM
515TN A515TNKM
Complete Set Unassembled
Chain End Brackets
510TN Type Set
For further information please
510TN A510TNK consult Brevetti Stendalto’s
515TN A515TNK Technical Office
190 191
A
C
®
5 46 62
545
Circular Nylon Cable Chain
with opening frames
Inner height (D) 46 mm A Separator Steel End Brackets Support Guide
C The end brackets set, containing two steel For correct functioning of the chain it is
Double share Sideband & Frame - Unassembled Part.no S445UF
construction with large anti-friction
single-pin.
- Assembled
Pin
Part.no S445UFMC plates screwed to the links, allows the two
ends of the chain to be attached to the
necessary that the installation is done in a
specific position.
545
Circular Nylon Cable
Frames opening from inner radius. 46 62 Part.no PG545 equipment. The end brackets are installed For this reason Brevetti Stendalto has Chain with opening
5
in one position offering the possibility of observed and created a support guide which frames
attaching the chain externally. (Fig. A) can do this. (Fig. B)
For particular applications it is possible to
create support guides with attachment plates
and special dimensions.
A B C D R Weight/pitch Chain
Technical characteristics mm mm mm mm mm kg Part Number
123 62 100 46 100 0,200 545SI100100
Speed 180°/s 220 °
3 Acceleration 180°/s2
For higher requirements please consult our R Di De
3
technical dept. 320
mm mm mm
De
100 485 760
Di ø9 6
37
R.
25 R. 314
Length of Chain R. 21
0
R . 232
R
Chain Degrees No
33 54
Part Numbers of Rotation of Pitches
ø1
2
R. 334
4
0
545 90 14 15 15
0
0 14
R.
545 180 18
13
40 0
15 80 15 R. 25
4 R.
545 270 22
545 360 27 SUP545
Fig. A Fig. B
192 193
®
599
Circular Nylon Cable Chain
with un-screwable aluminium frames
Inner height (D) 59 mm A Steel End Brackets Support Guide
Strong double share Sideband & Frame C The end brackets set, containing two steel For correct functioning of the chain it is
construction with three single-pins in
steel for high torsion resistance.
5 59 85
plates screwed to the links, allows the two
ends of the chain to be attached to the
necessary that the installation is done in a
specific position.
599
Circular Nylon Cable
Alu-frames are un-screwable from inner equipment. The end brackets are installed For this reason Brevetti Stendalto has Chain with un-screwable
45 77,5 77,5
and outer radius. in one position offering the possibility of observed and created a support guide which aluminium frames
attaching the chain externally. (Fig. A) can do this. (Fig. B)
For particular applications it is possible to
create support guides with attachment plates
and special dimensions.
A B C D R Weight/pitch Chain
Technical characteristics mm mm mm mm mm kg Part Number
272 85 210 59 220 0,900 599
Speed 180°/s
3 Acceleration 180°/s2
For higher requirements please consult our De
R Di De 180°
3
technical dept. mm mm mm
Di 220 1400 2000 610
R. 1
R.
023
937
R
R Length of Chain
.8
R.
30
7 30
Chain Degrees No
0
Part Numbers of Rotation of Pitches Ø10,5 R. 770 R. 77
29 5 0.5
599 90 14 R. 97 ø1
29 R. 975 SUP599
599 180 19
599 270 23
599 360 28
Fig. A Fig. B
194 195
11,5 11,5 11,5
21,3 11,25 4 11,25
21,25 21,25
11,25 11,25
40
28
16
H80 11,25
8 42 3,5
60 11,25
11,25 4 8 8
11,5 4 21,3
26,5 21,5 11,25
31,5 16 38,25
42 11,25 16 16 28 166 55,25
4 47 19,95
57 40 6 68 11,25 11,25
80,5
11,25 11,25
309SU/CU 4 - 11,5475MU/PU 11,5 8 - 478MU/PU
60 80PU 4 13 19,95
Separation System
11,5
16.5 8 3,5
11,25 11,25 11,25
319ZE 16 -4 329SU 16 - 329CD 16
37
H57 separator. Side separator.
21,25
Halfway
21,25
separator.21,3
Halfway mobile separator.
Side16.5separator. Halfway separator. Halfway mobile Horizontal separator. Up to 6 horizontal separations.
Horizontal separator.
3,5 Up to 6 horizontal separations.
M80
11,25 11,25 11,25
26,5 26,5 26,5
42 42 11,25 11,25 42 11,25
The Separation System, proposed by Brevetti Stendalto, guarantees the perfect disposal of cables
57 inside the 57 24,75
13,75 57 38,75
21,3
53,7 35.75
chain and allows an easy opening of the frame also when the chain16.5 11,25
is already harnessed.
12.5
4
11,25 11,2512.5 11,25 16.557,25
20,5
4 8,25 46,75
11,25 35,75 11,25
7 55,25 12,95 M80
57.75
80,5
46.75
11,25 28.5 11,25 11,25 11,25 11,25 11,25 37 32,75 11,25 8,25 4 7 37
45 11,25 45 11,25 7 4 12,95 12,95 7
A wide range of horizontal separators is available in order to 16.5
obtain many different
4
12
arrangements.
28.5
4 16.5
8,25 4 8,25 7 7 7 75,5 21,3
H57 7 7
21,3 21,3
38,75 21,3
12.5 4 12.53,5 8,25 8,25 3,5 8,25 7 7 7 7
16.5 16.5 55,25 12,95 13.75 13.75 13.75
37 13,75 13,75 13,75 13,75 13,75 37 80,5
5 5 4 12,95 12,95
4 4 11,25
C
16.5 Horizontal 16.5
SP803F 11,25
S803F 5
X X X 5
28
26,5 16
H45 42 21,3 26,5 21,3 21,3
X 2
Separator 42
40 SI309 11,25
S3095F SP3095F 11,25
4.5 mm 2 44
8 57
4
57
8.5 Part Number 11,25
8
11,25
8 8,25
60 11,25 11,25
5 5 12.5 12.5 5 5
8,25 3,5 M80 3,5 H45
20,5
28.5
12 45
32,75 16.5 8,25
45
SI3083F S57C3F SP3083F SP803F S803F
SI4452FPU 28.5S4452FPU 4 8,25SI4453FPU8,25 11,25 S4453FPU 37
38,75
21,3 8,25
16.5 26,5 4
16.5 12.5 4
SP4452F
12.5
37
42 8,25 16.5
SP4453F
8,25 11,25 8,25
57 37
55,25 12,95
4 80,5 5fori 32,75
20,5
8,25 H45 45
4
16.5 4 5
SP4452F.1 (445PU) 5 11,25 4
16.5 SP4453F.1 (445PU)
3,5 11,25
H110SC/SA
12,95
- PC/PA
12,95 4 8,25 8,25
16
11,25 11,25 11,25 21,3 21,3 21,3
Side Separator. Halfway Separator. Horizontal
13.75 Separator. Up to 4 8,25
horizontal 8,2520,5
separations.
8,25
8,25 3fori
660A - 306SU/CU - 326SU
28
13,75 24.75
32,75 8,25
H57
4
408
57,25 60 46,75
770A24,75
35,75 7
S1105F
57.75
35.75
designed46.75to having4 a side 7
of 5 slots
7
7
and other side of 3 slots 3,5for many
4 separations.
8,25 8,25
45
8 8
Side separator. Halfway separator. Halfway mobile separator. Side4 separator.
7 Halfway
7 separator. Horizontal sepa- 7
11,25
7 7
13.75
75.5 8,25 8,25
11,25
8,25
16.5
16 16.5 16 16 75,5
7 7 7
Horizontal separator. Up to 2 horizontal separations.
37 37
7
rator.
7
Up to
24,75
7
4 horizontal
13,75
7
separations. 42 89,9
26,57
46.75
72,7
7
35.75
55,5 11,25
24.75
7
38,3
7
21,17 28.542 3,5
12.5
26,5 12.5
25,725
11,25
16.5 16.5 4 4 57,25 46,75 35,75 7 13.75
57.75 13.75 13.75 4 13.75 13.75 7
7 13,2 57 85,2 55,5 57
45
13,75 13,75 13,75 4 13,75 7 13,75 7 4 4 12
11,25 7 11,25
4 75.5 11,25 11,25
25,725
13,27 13,27 28.5
16.5
3,5 3,5
5
7 7 7 75,5
16
11,25 5 11,25 7 13,27 11,25 H80
13,27 13,27
115
11,25
12.528.5 4 11,25 12.5
12.5
25,7
11,25
25,725
12.5 115
7 7 7 7 28
37 13.75 13,2
13.75 13,2
13.75 13,2
13.75 13,2
13.75
40 8 3,5 3,5 45
12
16.5 4 13,75 13,75 13,75
31,5
13,75
4
13,75
21,5
8
11,5
86
M8060 21,1
38,25
21,1 21,3 21,1 21,1 21,1 5 25,8 25,8
26,5
25,725
28.5
4 47 55,25 5 19,95
5 6 6 12.5 4 12.5
3,5 16 16 16 80,5
21,3 4 13 19,95 11,25
16.5
SP3061F S3061F 11,5
55,25
11,5 38,75 11,5
12,95 21,25 21,25 21,3
S1105F SP1105F 5 S1105F
11,25
H45SP1105F
37 80,5 X
4
16.5 4 SI3061F SP770A3F 12,95 12,95
S770A3F 4,5 8,25
11,25
21,3 21,3 20,5
21,3 32,75 8,25
42 11,25
2,5
11,3
16 16 45
2,4
11,25
335LI/LE - 435MU/PU M80
28 28 4
4 8,25 8,25
25
42
26,5 40 40 8 8 325LI/LE/PI 11,25
11,3
11,25 60 60 8,25 8,25 8,25
307SU
11,25
4
11,25
4 8 8 57 8 8 308SU/CU13,75- 328SU Side separator. Halfway21,335.75
separator.
24.75 Halfway mobile
13.75 11,25
Side separator. Halfway separator. Halfway mobile
11,25
8,9
38,75 38,75 X 2,5 X
11,3
21,3 11,25
2,4
21,25
55,25 55,25 21,25 12,95 xxx
16.5 16.5 12,95 Separator Separator
M80
25
80,5 mm Part Number mm
5 5
37 3,5 80,5 3,5 115
35
37
SP3073F S3073F 4 412,95 12,95
H80 Part Number
11,3
12,95 12,95 xxx 11,25
16.5 16.5 4 4
21,3
SI3083F
21,3 21,3
S3083F
21,3 21,3
SP3083F
21,3 42
SO11031 31 SO11031 31
8,9
Large selection
of chain-frames:
- aluminium draw plates
cut to size;
- aluminium drilled
frames, according
Cable drag chains in steel for long travel distance pag. 220 to customer drawings
Special offshore applications pag. 225
199
®
20LT
Bright Zinc Plated Steel chain
with aluminium frame
Inner height (D) 32 mm A Separator Self-Supporting Bright Zinc Plated Steel End Brackets
Bright Zinc Plated Steel chain1. Part.no S20LTF Capacity Diagram The end brackets set contaning four steel plates screwed to
C - Unassembled
The maximum length of the
Aluminium draw plates with nylon
separator or Aluminium split cross piece 3 32 53
- Assembled Part.no S20LTFMC
self-supporting capacity ( LS
2
)
the links allows the two ends of thechain to be attached to
the equipment. 20LT
Bright Zinc Plated
created by design. A both can mounted in relationship to the weight Steel chain with
every second links. of the cables and hoses aluminium frame
Alu-draw frames are standard mounted 16 contained per linear metre.
and every link. You can request the
quote C with special quote.
(1)
available in Stainless Steel.
40
30
10
mm mm mm mm mm kg Part Number 8
Speed 0,5 m/s
C 3
For higher requirements please consult our 186 1053 min
1544 32 075-115-150-205-250-305
Max Ø38 4,86 20LT154 * 2
technical dept. Fig. A
236 53 3
204 32 075-115-150-205-250-305 5,15 20LT204 * 1,5
32 53 Chain fixed inner/outer the radius (Fig A)
286 53 254 32 075-115-150-205-250-305 5,45 20LT254 * 1
0 1 2 3 4 5
For sliding applications, characteristics 336 53 304 32 075-115-150-205-250-305 5,75 20LT304 * LS Max unsupported length
techniques may vary depending on the
**Complete the code by inserting the value of the quote C and the radius (R): Ex 20LT 1 2 3 2 5 0
2
44
4
LS N Chain equipped with aluminium draw plates every pitch: complete the code by inserting the letter D: LS 33
LS Es. 20LT154250 D Suitable to long travel distance.
LS 40 20 See page 220
2 R 2
8 A 8 22
75 SL Machined Cross Frame 11
M H
Machined cross frames 20LA available on request
F1 F2
for bending radius listed below. Custom solutions
53 for machined cross frames realization, based on
customer’s and/or specific requirements.
LS 10 min 4 Max Ø38 Please contact Brevetti Stendalto’s Technical The red marking in the
LS
2 M1 R
Department for further information. diagram area considers the 75
MOVING POINT
R H* N M N1 M1 difference of weight between
230
mm mm mm mm mm mm various widths of chain. Chain F1 F2
FIXED POINT 75 N1 type mm mm Supplementary movable
075 216 180 390 - - separators.
115 296 220 515 500 1080 20LT079 61 67
For applications with LS2
150 366 255 625 675 1485 20LT104 86 92
Length of chain (L) and weights not included in
205 476 310 795 885 2005 20LT154 136 142
Half travel distance ( LS ) 250 566 360 940 1030 2385
the area of the diagram 20LT204 186 192
2 showing self-supporting
plus length of curve (M) or (M1) 305 676 410 1110 1190 2825 20LT254 236 242
capacity, verify the possible 20LT304 286 292
* The height H should be increased by 10 mm/m use of support rollers (see
L= LS + M or M1 approx. because of preload. In case of limitation to Special widths
2 available space, refer to the Technical Dptm. page 30). F1=A-50 F2=A-44
200 201
®
20LC
Bright Zinc Plated Steel chain
with aluminium covers
Inner height (D) 31 mm A Separator Self-Supporting Bright Zinc Plated Steel End Brackets
Bright Zinc Plated Steel chain1. Capacity Diagram The end brackets set contaning four steel plates screwed to
C - Unassembled Part.no S20LTF
The cover is of Aluminium. The maximum length of the
You can request the quote C 3 31 53
- Assembled Part.no S20LTFMC
self-supporting capacity ( LS
2
)
the links allows the two ends of thechain to be attached to
the equipment. 20LC
Zinc plated steel
with special quote. in relationship to the weight chain with aluminium
(1)
available in Stainless Steel. of the cables and hoses covers
16 contained per linear metre.
40
30
4 4
*Complete the code by inserting the value of the radius (R): Ex. 20LC154 2 5 0
frequency, added weight and work environment. **Complete the code by inserting the value of the quote C and the radius (R): Ex. 20LC 1 2 3 2 5 0
LS 44
LS
LS N 2
LS 33 Suitable to long travel distance.
2 See page 220
R 20
R H* N M N1 M1 20
75 mm mm mm mm mm mm
M H 11
115 296 220 515 500 1080 F2
F1
150 366 255 625 675 1485
205 476 310 795 885 2005
The red marking in the
LS 250 566 360 940 1030 2385
LS diagram area considers the 75
2 M1 305 676 410 1110 1190 2825
MOVING POINT R difference of weight between
* The height H should be increased by 10 mm/m various widths of chain.
230 approx. because of preload. In case of limitation to Chain F1 F2
available space, refer to the Technical Dptm.
FIXED POINT 75 N1 type mm mm
20LC079 61 67
For applications with LS
2 20LC104 86 92
Length of chain (L) and weights not included in 20LC154 136 142
Half travel distance ( LS ) the area of the diagram 20LC204 186 192
2 showing self-supporting 20LC254 236 242
plus length of curve (M) or (M1)
capacity, verify the possible 20LC304 286 292
L= LS + M or M1 use of support rollers Special widths
2 (see page 30). F1=A-50 F2=A-44
202 203
8 W 8
SL
C
®
52 74
30LT 17
LS N
540
17
C+34
74
74
506
....
52
52
150-220-250-305-400-535
150-220-250-305-400-535
8,13 30LT506]]]*
30LT]]]]]]**
4
*Complete the code by inserting the value of the radius (R): Ex. 30LT156250 LS 15 60 15
LS Suitable to long travel distance.
**Complete the code by inserting the value of the quote C and the radius (R): Ex. 30LT123250
2 LS See page 221
R Chain equipped with aluminium draw plates every pitch: complete the code by inserting the letter D. 2 25
Ex. 30LT156250D 13
95 F1 F2
M H
A Machined Cross Frame
8 SL 8
Machined cross frames 30LA available on request
95
for bending radius listed below. Custom solutions
LS for machined cross frames realization, based on
LS
customer’s and/or specific requirements. Please The red marking in the
MOVING POINT
2 M1
R 74 diagram area considers the Chain F1 F2
contact Brevetti Stendalto’s Technical Department
for further information. difference of weight between Type mm mm
250
R H* N M N1 M1 various widths of chain 30LT106 77 83
12 min 4 Max Ø58
FIXED POINT 95 N1
mm mm mm mm mm mm assembled with frames every 30LT156 127 133
30LT206 177 183 Supplementary movable
L
150 388 290 670 830 1770 second pitch. separators.
220 528 360 890 1145 2515 30LT256 227 233
Length of chain (L) 250 588 385 980 1255 2800 For applications with 30LT306 277 283
30LT356 327 333
Half travel distance ( LS ) 305 698 440 1150 1450 3285 and weights not included in
2 400 888 540 1450 1740 4065 the area of the diagram 30LT406 377 383
plus length of curve (M) or (M1) 30LT456 427 433
535 1158 675 1880 2110 5105 showing self-supporting
30LT506 477 483
L= LS + M or M1 *The height H should be increased by 10 mm/m capacity, verify the possible
Special widths
2 approx. because of preload. In case of limitation to use of support rollers
the available space, refer to the Technical Dptm. F1=A-63 F2=A-57
(see page 30).
Bright Zinc Plated Steel
Type Part Numbers
Complete Set Assembled
Chain End Brackets
Type Set
30LT... A30LKM]**
Complete Set Unassembled
Chain End Brackets
Type Set
For further information please
30LT... A30LK
consult Brevetti Stendalto’s
** 1=Pos.1; 2=Pos.2; 3=Pos.3 Technical Office.
204 205
8 A 8
SL
C
®
52 74
30LC 17
L
*The height H should be increased by 10 mm/m 30LC256 227 233
approx. because of preload. In case of limitation to 30LC306 277 283
the available space, refer to the Technical Dptm. For applications with 30LC356 327 333
and weights not included in 30LC406 377 383
the area of the diagram 30LC456 427 433
showing self-supporting 30LC506 477 483
capacity, verify the possible Special widths
use of support rollers F1=A-63 F2=A-57
(see page 30).
Bright Zinc Plated Steel
Type Part Numbers
Complete Set Assembled
Chain End Brackets
Type Set
30LC... A30LCKM]**
Complete Set Unassembled
Chain End Brackets
Type Set
30LC... A30LCK For further information please
** 1=Pos.1; 2=Pos.2; 3=Pos.3 consult Brevetti Stendalto’s
Technical Office.
206 207
A
C
65 95
®
22,5
35LT
Bright zinc plated steel cable chain
with Alu-frames
A
Inner height (D) 65 mm C Self-Supporting Bright Zinc Plated Steel
Bright Zinc Plated Steel Cable Chain.1 Capacity Diagram End Brackets
6 A Separator The maximum length of the The end brackets set, containing four steel plates screwed
35LT
(L)
Aluminium Holed cross pieces designed 65 95
or Alu-frame are mounted each second C - Unassembled Part.no ST3500F self-supporting capacity to the links allows the two ends of the chain to be attached
link. Quote C can be in special size. - Assembled Part.no ST3500FMC Bright zinc plated
in relationship to the to the equipment.
(1)
available in Stainless Steel. steel cable chain
22,5 65 95 weight of the cables and with Alu-frames
hoses contained per linear
metre.
22,5
200
L
MOVING POINT R
mm mm mm mm mm mm 35LT204 178 186 Supplementary movable
300 200 512 65 95 880
375 1100 2360 35LT254 228 236 separators.
For applications with 35LT304 278 286
FIXED POINT 125 N1 250 612 425 1040 1310 2870 and weights not included in
300 712 480 1200 1495 3335 35LT354 328 336
22,5 350 812 525 1350 1670 3775
the area of the diagram 35LT404 378 386
Length of chain (L) showing self-supporting 35LT454 428 436
400 912 575 1510 1825 4190
capacity, verify the possible 35LT504 478 486
Half travel distance ( LS ) 450 1012 625 1670 1975 4595
use of support rollers Special widths
2 500 1112 675 1825 2120 4985
plus length of curve (M) or (M1) 600 1312 775 2140 2390 5750 (see page 30). F1=A-71,5 F2=A-63,5
65 95
35LC 22,5
200
150
Aluminium frames with nylon separators 100
L
600 1312 775 2140 2390 5750 35LC154 128 136
35LC204 178 186
*The height H should be increased by 10 mm/m 35LC254 228 236
Length of chain (L) approx. because of preload. In case of limitation to
For applications with
and weights not included in 35LC304 278 286
Half travel distance ( LS ) the available space, refer to the Technical Dptm.
35LC354 328 336
2 the area of the diagram
plus length of curve (M) or (M1) showing self-supporting 35LC404 378 386
capacity, verify the possible 35LC454 428 436
L= LS + M or M1 use of support rollers 35LC504 478 486
2 Special widths
(see page 30).
F1=A-71,5 F2=A-63,5
40LT
Bright zinc plated steel cable
chain with Alu-frames
Inner height (D) 112,5 mm A A
Separator Self-Supporting Bright Zinc Plated Steel
Bright Zinc Plated Steel Cable Chain.1 11 SL 11 Capacity Diagram End Brackets
C - Unassembled Part.no S310TCF9
The maximum length of the The end brackets set, containing four steel plates screwed
40LT
(L)
Aluminium Holed cross pieces designed - Assembled Part.no S310TCF9MC
or Alu-frame are mounted each every self-supporting capacity to the links allows the two ends of the chain to be attached
Bright zinc plated
link. Quote C can be in special quote. 112,5 145 175 in relationship to the to the equipment.
(1)
available in Stainless Steel. 10 steel cable chain
weight of the cables and with Alu-frame
hoses contained per linear
29 26 MIN 5 MAX 145
metre.
500
400
300
200
150
60
40
10
Technical characteristics A B C D R Weight/m Chain 8
6
For higher requirements please consult our 358 145 300 112,5 250-300-350-400-450-500-550-600-700-750-850 20,68 40LT300 * 2 length (m)
15 15 90
A A
LS N 11 SL 11
C
LS
2 F1 F1 F2
R
112,5 145 175 R H* N M N1 M1
30
The red marking in the 30
180 10 M H mm mm mm mm mm mm diagram area considers the
250 664 510 1150 1545 3285 difference of weight between 25 25
29 26 MIN 5 MAX 145 300 764 555 1305 1755 3790 various widths of chain.
L
350 864 605 1460 1950 4265 Chain F1 Chain F2
400 964 655 1620 2125 4715
LS 450 1064 710 1780 2295 5150 type mm type mm
LS Machined Cross Frame For applications with 40LT150 135 40LT150 144
2 500 1164 755 1930 2455 5570
M1
R
550 1264 805 2090 2605 5975
and weights not included in 40LT200 185 40LT200 194 Supplementary movable
Machined cross frames 40LA available separators
on request for bending radius listed 600 1364 855 2245 2755 6375 the area of the diagram 40LT250 235 40LT250 244
350
below. 700 1564 955 2560 3035 7155 showing self-supporting 40LT300 285 40LT300 294
180 N1 Custom solutions for machined cross 750 1664 1010 2720 3170 7535 capacity, verify the possible 40LT400 385 40LT400 394
frames realization, based on customer’s 850 1864 1105 3030 3430 8280 use of support rollers
Length of chain (L) 40LT500 485 40LT500 494
and/or specific requirements. 1000 2164 1255 3500 - -
(see page 30). Special Widths F=A-73 Special Widths F=A-64
Half travel distance ( LS ) * The height H should be increased by 10 mm/m
2 Please contact Brevetti Stendalto’s
plus length of curve (M) or (M1) approx. because of preload. In case of limitation to Bright Zinc Plated Steel
Technical Department for further available space, refer to the Technical Dptm.
information. Type Part Numbers
L= LS + M or M1
2 Complete Set Assembled
Chain End Brackets
type Set
40... A40LKM **
Complete Set Unassembled
Chain End Brackets
type Set
40... A40LK For further information please
** 1=Pos.1; 2=Pos.2; 3=Pos.3 consult Brevetti Stendalto’s
See mounting variations page 31 Technical Office
212 213
®
40LC
Zinc plated steel chain
with aluminium cover
A
Inner height (D) 104,5 mm A 14,5 SeparatorSL 14,5 Self-Supporting Bright Zinc Plated Steel
Bright Zinc Plated Steel Cable Chain C C
- Unassembled Part.no S310TCF9 Capacity Diagram End Brackets
with aluminium cover and the quote The maximum length of the The end brackets set, containing four
40LC
(L)
- Assembled Part.no S310TCF9MC
C can be in special size. Available it self-supporting capacity steel plates screwed to the links allows
104,5 145 104,5 145 Zinc plated steel
can be done in Stainless steel. 10 in relationship to the the two ends of the chain to be chain with
weight of the cables and attached to the equipment. aluminium cover
29 30 MIN 5 MAX 115 hoses contained per linear
metre.
500
400
Speed 0,5 m/s 258 145 200 104,5 250-300-350-400-450-500-550-600-700-750-850 23,84 40LC200 * 10
8
6
Acceleration 2 m/s2 308 145 250 104,5 250-300-350-400-450-500-550-600-700-750-850 25,20 40LC250 * 4
3
For higher requirements please consult our 358 145 300 104,5 250-300-350-400-450-500-550-600-700-750-850 26,56 40LC300 * 2
Fig. A
technical dept. 458 145 400 104,5 250-300-350-400-450-500-550-600-700-750-850 29,28 40LC400 * 1 Chain fixed outer radius (Fig A)
0 1 2 3 4 5 6 7 8 9 10 11 12 13
558 145 500 104,5 250-300-350-400-450-500-550-600-700-750-850 31,01 40LC500 * See mounting variations page 31
LS Max unsupported
C+58 145 .... 104,5 250-300-350-400-450-500-550-600-700-750-850 40LC ** 2 length (m)
*Complete the code by inserting the value of the radius (R): Ex. 40LC150 2 5 0 180 180 160 160
4 **Complete the code by inserting the value of the quote C and the radius (R): Ex. 40LC 1 2 3 2 5 0
LS
2
LS
4
LS N
LS R H* N M N1 M1 Suitable to long travel distance
75 75
2 See page 233
R mm mm mm mm mm mm
250 650 510 1150 1545 3285 15 15 90 25 90 25
180 M H 300 750 555 1305 1755 3790
The red marking in the 30 30
350 850 605 1460 1950 4265
400 950 655 1620 2125 4715 diagram area considers the
450 1050 710 1780 2295 5150 difference of weight F1
between F1 F2 F2
500 1150 755 1930 2455 5570 various widths of chain.
L
LS
LS 550 1250 805 2090 2605 5975
2 M1 600 1350 855 2245 2755 6375
MOVING POINT R
700 1550 955 2560 3035 7155 For applications with
350 750 1650 1010 2720 3170 7535 and weights not included in Chain F1 F2
850 1850 1105 3030 3430 8280 the area of the diagram Supplementary movable
FIXED POINT 180 N1
1000 2150 1255 3500 - - type mm mm separators.
showing self-supporting 40LC150 144 135
* The height H should be increased by 10 mm/m capacity, verify the possible
approx. because of preload. In case of limitation 40LC200 194 185
Length of chain (L) to the available space, refer to the Technical use of support rollers 40LC250 244 235
Dptm. (see page 30). 40LC300 294 285
Half travel distance ( LS )
2 40LC400 394 385
plus length of curve (M) or (M1) 40LC500 494 485
Special Widths
L= LS + M or M1 F1=A-64 F2=A-73
2
Bright Zinc Plated Steel
Type Part Numbers
Complete Set Assembled
Chain End Brackets
Type Set
40LC A40LCKM *
Complete Set Unassembled
Chain End Brackets
Type Set
40LC A40LCK For further information please
** 1=Pos.1; 2=Pos.2; 3=Pos.3 consult Brevetti Stendalto’s
Mount Variant page 31 Technical Office
214 215
15 W 15
SL
C
®
138 175
42LT 33
For higher requirements please consult our 358 175 300 138 250-300-350-400-450-500-550-600-700-750-850
138 175 24,22 42LT300 * 4
3
technical dept. 458 175 400 138 250-300-350-400-450-500-550-600-700-750-850 25,15 42LT400 * 2
4 4
*Complete the code by inserting 2 length (m)
techniques may vary depending on the
frequency, added weight and work environment. **Complete the code by inserting the value of the quota C and the radius (R): Es. 42LT 1 2 3 2 5 0
110
110
Suitable to long travel distance
A A Machined Cross Frame
LS
11 SL 11 See page 220
C LS
2
LS N Machined cross frames (42LA) available on 15 15
25 2590 9025 25
LS request for bending radius listed below.
30 30
175 Custom solutions for machined cross frames
2
112,5 145
10 R
realization, based on customer’s and/or
F1 F1 F2 F2
180 M
specific requirements. Please contact Brevetti
H Stendalto’s Technical Department for further
29 26 MIN 5 MAX 145 The red marking in the
information.
diagram area considers the
R H* N M N1 M1
difference of weight between
mm mm mm mm mm mm Chain F1 Chain F2
various widths of chain.
L
LS
LS 250 720 510 1150 1545 3285 Type mm type mm
2
MOVING POINT
M1
R 300 820 555 1305 1755 3790
350 920 605 1460 1950 4265 For applications with 42LT150 144 42LT150 135
350 400 1020 655 1620 2125 4715 and weights not included in 42LT200 194 42LT200 185
450 1120 710 1780 2295 5150 42LT250 244 42LT250 235
FIXED POINT 180 N1 the area of the diagram
500 1220 755 1930 2455 5570 42LT300 294 42LT300 285
550 1320 805 2090 2605 5975 showing self-supporting
42LT400 394 42LT400 385
600 1420 855 2245 2755 6375 capacity, verify the possible
42LT500 494 42LT500 485
Length of chain (L) 700 1620 955 2560 3035 7155 use of support rollers Special Widths F=A-64 Special Widths F=A-73
750 1720 1010 2720 3170 7535 (see page 30).
Half travel distance ( LS ) 850 1920 1105 3030 3430 8280
2 1000 2220 1255 3500 - -
plus length of curve (M) or (M1) Bright Zinc Plated Steel
*The height H should be increased by 10 mm/m Type Part Numbers
L= LS + M or M1 approx. because of preload. In case of limitation to
2 the available space, refer to the Technical Dptm. Complete Set Assembled
Chain End Brackets
type Set
42LT... A42LKM **
Complete Set Unassembled
Chain End Brackets
type Set
42LT... A42LK For further information please
** 1=Pos.1; 2=Pos.2; 3=Pos.3 consult Brevetti Stendalto’s
See mounting variations page 31 Technical Office
216 217
23,5 W 23,5
SL
C
®
182 220
45T 45
CA
400
690 220 600 182 400-600-800-1000-1250-1500 42,97 45T600 * 1 variations page 31.
0 1 2 3 4 5 6 7 8 9 10 11 12 13
C+90 220 .... 182 400-600-800-1000-1250-1500 45T **
20 min. 6 max. 180 LS Max unsupported length
*Complete the code by inserting the value of the radius (R): Ex. 45T300 4 0 0
4 4
2
**Complete the code by inserting the value of the quote C and the radius (R): Ex. 45T 1 2 3 4 0 0
LS N 130
LS
23,5 A 23,5
2 R SL LS
R H* N M LS 13
250 2 20
M H mm mm mm mm 200
220 25 7575 25
F
400 1060 770 1760
40
600 1460 970 2390
800 1860 1170 3020 Supplementary movable
20 min. 6 max. 180 1000 2260 1370 3650 500 P = 250 100 separators.
1250 2760 1620 4430
The red marking in the
Length of chain (L) Machined Cross Frame diagram area considers the
1500 3260 1870 5220
Half travel distance ( LS ) Machined cross frames (45LT) available
* The height H should be increased by 10
difference of weight between
2 on request for bending radius listed Chain F
plus length of curve (M) mm/m approx. because of preload. In case of various widths of chains
below. limitation to the available space, refer to the Type mm
Custom solutions for machined cross assembled with aluminium
Technical Dptm. 45T300 285
L= LS + M frames realization, based on customer’s draw plates every second pitch.
45T350 335
2
and/or specific requirements.
For applications with LS2
45T400 385
Please contact Brevetti Stendalto’s and weights not included in 45T450 435
Technical Department for further the area of the diagram 45T500 485
information. showing self-supporting 45T600 585
Special widths F=A-105 Steel laminar cover.
capacity, verify the possible
use of support rollers (see
page 30). Bright Zinc Plated Steel
Type Part Numbers
Complete Set Assembled
Chain End Brackets
Type Set
45... A45KM **
Complete Set Unassembled
Chain End Brackets
Type Set
45... A45K
** 1=Pos.1; 2=Pos.2; 3=Pos.3 For further information please
See end brackets mounting variations consult Brevetti Stendalto’s
page 31. Technical Office
218 219
®
Sliding
cable
chains in
bright zinc
plated steel
20LPT with aluminium draw plates 30LPT with aluminium draw plates
Sliding low-friction skids
A A
A A A A fastened to the links allow
13 13 SL SL 13 13
Technical characteristics C C C 13,5 SL 13,5 chains running on
when self-supported themselves, all the while
3 3 D D B B B B
granting them to get more
Speed 2 m/s 4 D B B
longer strokes. Aluminium
Acceleration 2 m/s2 Draw Plates with nylon
21 21 10 10 MINMIN
4 4 MAXMAX
ø38 ø38
For higher requirements please consult our 22,5 12 MIN 4 MAXø58 separarions or aluminium
technical dept. split cross piece created by
design. Separators system
A B C D R Weight/m Chain A B C D R Weight/m Chain
available.
mm mm mm mm mm kg Part Number mm mm mm mm mm kg Part Number (1)
Available in Stainless steel
121 58,5 79 32 115-150-205-250-305 4,82 20LPT079 * 151 81,5 106 52 150-220-250-305-400-535 6,71 30LPT106]]]*
146 58,5 104 32 115-150-205-250-305 4,97 20LPT104 * 201 81,5 156 52 150-220-250-305-400-535 6,95 30LPT156]]]*
196 58,5 154 32 115-150-205-250-305 5,27 20LPT154 * 251 81,5 206 52 150-220-250-305-400-535 7,20 30LPT206]]]*
246 58,5 204 32 115-150-205-250-305 5,57 20LPT204 * 301 81,5 256 52 150-220-250-305-400-535 7,44 30LPT256]]]*
296 58,5 254 32 115-150-205-250-305 5,87 20LPT254 * 351 81,5 306 52 150-220-250-305-400-535 7,68 30LPT306]]]*
4 346
C+42
58,5
58,5
304
....
32
32
115-150-205-250-305
115-150-205-250-305
6,17 20LPT304
20LPT
*
**
401
451
81,5
81,5
356
406
52
52
150-220-250-305-400-535
150-220-250-305-400-535
7,92
8,16
30LPT356]]]*
30LPT406]]]*
4
*Complete the code by inserting the value of the radius (R): Ex. 20LPT154 2 5 0 501 81,5 456 52 150-220-250-305-400-535 8,41 30LPT456]]]*
**Complete the code by inserting the value of the quote C and the radius (R): Ex. 20LPT 1 2 3 2 5 0 551 81,5 506 52 150-220-250-305-400-535 8,65 30LPT506]]]*
Chain equipped with aluminium draw plates every pitch: complete the code by inserting the letter D: Ex. 20LPT154250 D C+45 81,5 .... 52 150-220-250-305-400-535 30LPT]]]]]]**
Aluminium split cross pieces created by design *Complete the code by inserting the value of the radius (R): Ex. 30LPT156250
**Complete the code by inserting the value of the quote C and the radius (R): Ex. 30LPT551250
A B R Chain
Chain equipped with aluminium draw plates every pitch: complete the code by inserting the letter D: Ex. 30LPT156250D
mm mm mm Part Number
SL+26 58,5 115-150-205-250-305 20LPA *** Aluminium split cross pieces created by design
***Complete the code by inserting the value of the quote SL and the radius (R): Ex. 20LPA1 5 0 2 5 0
A B R Chain
mm mm mm Part Number
SL+27 81,5 150-220-250-305-400-535 30LPA]]]]]]***
***Complete the code by inserting the value of the SL and the radius (R): Es. 30LPA1 5 0 2 5 0
A A C SL
14,5 SL 14,5
C
4 D B B
3 D B B
220 221
®
Sliding
cable
chains in
bright zinc
plated steel 35LPT with aluminium draw plates 40LPT with aluminium draw plates
A B C D R Weight/m Chain
A A A A mm mm mm mm mm kg Part Number
Technical characteristics 21 21 SL SL 21 21 230 161,5 150 112,5 250-300-350-400-450-500-550-600-700-750-850 20,71 40LPT150 *
C C
when self-supported 280 161,5 200 112,5 250-300-350-400-450-500-550-600-700-750-850 21,17 40LPT200 * Sliding low-friction skids
330 161,5 250 112,5 250-300-350-400-450-500-550-600-700-750-850 21,63 40LPT250 * fastened to the links allow
Speed 2 m/s 6 6D DB B B B
380 161,5 300 112,5 250-300-350-400-450-500-550-600-700-750-850 22,09 40LPT300 * chains running on
Acceleration 2 m/s2
480 161,5 400 112,5 250-300-350-400-450-500-550-600-700-750-850 23,02 40LPT400 * themselves, all the while
34 34 15 15 MIN 5 MIN 5 MAX ø70
MAX ø70
580 161,5 500 112,5 250-300-350-400-450-500-550-600-700-750-850 23,94 40LPT500 * granting them to get more
For higher requirements please consult our
technical dept. A B C D R Weight/m Chain C+80 161,5 .... 112,5 250-300-350-400-450-500-550-600-700-750-850 40LPT ** longer strokes. Aluminium
mm mm mm mm mm kg Part Number *Complete the code by inserting the value of the radius (R): Ex. 40LPT150 2 5 0 Draw Plates with nylon
**Complete the code by inserting the value of the quote C and the radius (R): Ex. 40LPT 1 2 3 2 5 0 separarions or aluminium
172 107 104 65 200-250-300-350-400-450-500-600 11,49 35LPT104 *
222 107 154 65 200-250-300-350-400-450-500-600 11,86 35LPT154 * Aluminium split cross pieces created by design split cross piece created by
272 107 204 65 200-250-300-350-400-450-500-600 12,23 35LPT204 * A B R Chain design. Separators system
322 107 254 65 200-250-300-350-400-450-500-600 12,60 35LPT254 * mm mm mm Part Number available.
372 107 304 65 200-250-300-350-400-450-500-600 12,97 35LPT304 * SL+44 161,5 250-300-350-400-450-500-550-600-700-750-850 40LPA]]]]]]***
(1)
Available in Stainless steel
422 107 354 65 200-250-300-350-400-450-500-600 13,33 35LPT354 * ***Complete the code by inserting the value of SL and of the radius (R): Ex. 40LTA 1 5 0 2 5 0
472 107 404 65 200-250-300-350-400-450-500-600 13,70 35LPT404 *
522
572
107
107
454
504
65
65
200-250-300-350-400-450-500-600 14,07 35LPT454
200-250-300-350-400-450-500-600 14,44 35LPT504
*
*
40LPC with aluminium covers
230 161,5
mm
C
150
D
mm
104
R
mm
250-300-350-400-450-500-550-600-700-750-850
Weight/m
kg
Chain
Part Number
23,96 40LPC150 *
40LPT
4
**Complete the code by inserting the value of the quote C and the radius (R): Ex. 35PT 1 2 3 3 5 0 A
Chain equipped with aluminium draw plates every pitch: complete the code by inserting the letter D. Ex. 35LT154350D 280 161,5 200 104 250-300-350-400-450-500-550-600-700-750-850 25,33 40LPC200 *
22 S
C
330 161,5 250 104 250-300-350-400-450-500-550-600-700-750-850 26,69 40LPC250 *
Aluminium split cross pieces created by design 380 161,5 300 104 250-300-350-400-450-500-550-600-700-750-850 28,05 40LPC300 *
D B
480 161,5 400 104 250-300-350-400-450-500-550-600-700-750-850 30,77 40LPC400 * 10
A B R Chain
580 161,5 500 104 250-300-350-400-450-500-550-600-700-750-850 33,50 40LPC500 * 37 MI
mm mm mm Part Number 40
C+80 161,5 .... 104 250-300-350-400-450-500-550-600-700-750-850 40LPC **
SL+42 107 200-250-300-350-400-450-500-600 35LPA ***
*Complete the code by inserting the value of the radius (R): Ex. 40LPC150 3 5 0
***Complete the code by inserting the value of SL and the radius (R): Ex. 35LPA 1 5 0 2 5 0 **Complete the code by inserting the value of the quote C and the radius (R): Ex. 40LPC 1 2 3 3 5 0 40LPA
A
A
22 SL 22
C
A W A A 37
A A 40
MIN 5 MAX 115
21 SL 21 22 22 SL SL 22 22
C C C
40LPC
6 D B B B B A
10 D 10 D B B
22 S
C
37
A B C D R Weight/m Chain A B C D R Weight/m Chain 40
MI
222 223
Cable Drag Chains in Steel Special off-shore
for Long Travel Distance Applications
The use of cable chains in applications with a fixed bracket and a movable towing bracket. The Brevetti Stendalto steel cable chains have On request cable chains of special dimensions
particularly long travel distances offers many A secondary similar closed loop, made of steel been used in Off-shore applications for many which have been personalised according to the
benefits .The possibilities of the combined wire rope, drives the supporting frame along years. The high standard of quality required and clients needs are being used.
transportation of high power cables, signal the entire travel at a suitable speed, thus the special materials needed are characteristics .
cables and hydraulic hoses, together with ease ensuring a continuous support to relieve all in these kinds of applications.
of use and no need for maintenance, are the stresses. In addition to this a trough is arranged
unquestionable advantages of the system. to contain and guide the chain system along
Specific applications, characterised by the total travel. The chains are fitted with
Platform “Oseberg”
particularly aggressive conditions in the wheels on ball bearings, to keep to a minimum A
environment, require cable chains in steel. the friction on the supporting frame. The A: 45 chain in
stainless steel 316L
Brevetti Stendalto has offered for many years, supporting frame can be made both in
with positive results their own system based on galvanised steel, or if requested, in stainless B: 45 chain in
stainless steel 316L for rota-
the use of two steel drag chains and a travelling steel. tions of ± 180°
internal supporting frame. The chains are
arranged in a closed loop configuration, having
4 B
4
35 chains with
supporting frame applied
to De Icing equipment at
München airport
(Germany).
The length of the travel
distance is 90 m and it’s Platform “Tiffany”
velocity is 90 m per minute.
Specially designed chains in
stainless steel 316L
Length of travel
distance: 27 m
Total weight of the chains:
13 Ton.
224 225
Steel Cable Conduit
227
Steel Cable Conduit Steel Cable Conduit
Flanges Determining conduit length Flanges and mounting versions
5 X
Position 4
FS
5
FRONTAL FLANGES TYPE F2 Position 4 F1-2-3
DIMENSIONS and CHARACTERISTICS
A P LS
Frontal flanges type 2
ØD Part number LS/2 LS/2
A B P T U Z ØD Thk.
Z B
GPC015... 54 34 30 90 75 15 7 2,0
U Sp GPC038... 90 50 45 120 105 30 7 2,0
T GPC069... 120 65 60 160 140 35 9 2,0 F1-2-3
FR R
GPC140... 180 85 80 220 200 40 9 2,0
M
Position 5 FS
FS
FRONTAL FLANGES TYPE F3
DIMENSIONS and CHARACTERISTICS
A P Position 5 - 6
Frontal flanges type 3
ØD Part number
A B L M ØD P Q R Thk.
R M B Conduits can be supplied up to a Conduit length
GPC015... 54 34 85 65 7 30 70 50 2
GPC025... 54 54 85 85 7 30 70 70 2
maximum length of 5 m. L = LS/2 + M F1-2-3
Q Sp GPC038... 90 50 120 80 7 45 105 65 2 If the unsupported length (LS/2) is
L
GPC042... 70 70 100 100 7 45 105 85 2 more than 2.5 m, it is necessary to Bend
use support rollers. M
GPC051... 90 65 120 95 7 45 105 80 2 radius
GPC069... 120 65 150 95 9 60 135 80 2 70 290 Position 6 FS
GPC092... 120 85 150 115 9 60 135 100 2 100 414
GPC126... 145 95 175 125 9 60 160 110 2 120 497
GPC140... 180 85 210 115 9 80 195 100 2 130 538
GPC154... 145 115 175 145 9 80 160 130 2 170 704
GPC193... 180 115 210 145 9 80 195 130 2 180 745
GPC242... 225 115 255 145 9 100 240 130 2 250 1035 F1-2-3
228 229
Flexible Cables
for Cable Chains
Characteristics
(1)
The Brevetti Stendalto
cables have been tested
with accelerations
exceeding 20 m/s 2 and
speed of 6 m/s.
231
Flexible Cables
2- Check the minimum allowed bending radius 5- The cables/hoses must be installed and
of the chosen cable and compare it with the fixed using the appropriate accessories (see
bending radius of the chain. For a correct pages 226/227), at both extremities of the
installation, the last mentioned should be chain.
larger compared to the bending radius of the With Hydraulic Hoses
cable. 6- Verify the installation of the cables in the
chains with Brevetti Stendalto’s technical On request chain ready to be used with
3- There must be at least 10%-20% free space office or request a personalised project by
between the cable diameters and the filling in the appropriate module (page 229). hydraulic hoses.
internal dimensions of the chain. Install the Please contact our sales departments for
cables/hoses symmetrically in the chain with further information.
the larger and heavier towards the
outside and the smaller and lighter in the
centre. Further, it is necessary to separate
the cables using the separators, available for
all the chains, or the split cross pieces with
holes done in the appropriate sizes accord-
ing to the external diameter of the cable.
Custom-Built Packaging
6 Fig. 1 Fig. 2 For very large chains, example offshore packaging, for save transport and facilitated
applications, harbour cranes, steel mills, Brevetti assembling on-site.
6
MIN 10% MIN 20% Stendalto offers on request custom-built
D D
232 233
®
The plastic counter pressure cradle with the plastic insert, 2 double sided cradles and 1 counter pressure cradle COUNTER
PRESSURE
Part.no Diameter mm L H max~ CRADLE
Doublesided cradle
Part.no Diameter mm Part.no Diameter mm
6201012 10-12 6202426 22-26
6201214 12-14 6202830 26-30
6201416 14-16 6203034 30-34
6201618 16-18 6203438 34-38
6201822 18-22 6203842 38-42
X Ø inner
Page of Page
LS
Price/ LS LS
item no. Part number Description Unit Q.ty unit 2 2
Øo
R ute
r
Ø inner
Horizontal movement Vertical movement circular movement with 1 chain circular movement with 2 chains
mm Kg/m mm mm Kg/m mm
mm Kg/m mm mm Kg/m mm
mm Kg/m mm mm Kg/m mm
mm Kg/m mm mm Kg/m mm
mm Kg/m mm mm Kg/m mm
Signature/stamp mm Kg/m mm mm Kg/m mm
mm Kg/m mm mm Kg/m mm
Delivery time: mm Kg/m mm mm Kg/m mm
Products Range
page from to from to from to mm mm from to max m kg inner outer inner outer
mm mm mm mm mm mm mm mm radius radius mm mm
40 200 12 35 12 - 18 41 15 17 18 40 0,90 0,1 - - - - - - - - - -
42 250L/LI/LE 15 50 17 - 26 61 23 29 28 100 1,30 0,1 - • • - o - - - - -
44 325LI/LE 40 103 25 - 57 120 38 45 50 150 1,90 0,5 o • • - o - - - - -
46 325L 40 103 25 - 57 120 38 45 50 150 1,90 0,5 o - - - o - - - - -
48 335L/LI/LE 40 150 35 - 56,5 166,5 50 52 65 200 2,20 1 o • • - o - - - - -
50 339 40 76 39 - 60 96 50 35 50 100 2,20 1 o - - - o - - - - -
58 300A 15 75 18 - 27 87 23 30 40 120 1,70 0,1 - • - - - - - - - -
60 300 14 36 18 - 30 52 23 30 40 120 1,55 0,1 o - - - - - - - - -
62 305A 30 50 24 - 54 74 30 35 50 150 1,40 1 - • - - o - - - - -
64 305 30 50 23 - 52 72 30 35 50 150 1,90 1 o - - - o - - - - -
66 355A 45 95 31 - 74 124 43 40 75 200 2,30 1 - • - - o - - - - -
68 355 45 95 30 - 74 124 45 40 75 200 2,30 1 o - - - o - - - - -
70 400 40 60 25 - 62 82 35 40 50 150 1,60 1 - • - - o - - - - -
72 435MU 40 150 35 - 60 170 49 50 60 200 2,20 1 o • • - o - - - - -
74 445MU 50 362 45 - 72 384 64 67 75 300 3,70 1 o • • - o o o - - -
76 660A 50 362 37 - 75 387 55 50 100 250 2,45 1 o • - - o o o - - -
78 770A 45 357 60 - 80 392 78 70 150 300 3,80 1 o • - - o o o - - -
80 475MU 74 498 75,5 - 112 536 100,5 105 150 400 4,75 1 o • • - o o o - - -
86 H45SC 75 400 45 - 113 438 70 75 75 300 3,00 1 o • • o o o o - - -
88 H57SC 75 500 57 - 113 538 85 90 150 400 5,00 1 - • • o o o o o - -
90 H80SC 64 400 70 75,5 120 456 100 120 200 750 6,00 1 - • • o o o o o - -
92 H110SC 200 600 112 - 260 660 150 160 200 750 9,00 1 - • • o o o o o - -
96 306 43 355 30 37 79 391 55 65 75 300 3,10 1 - • • o o o o o - -
100 307 42 354 40 47 80 392 64 70 75 250 3,90 1 - • • o o o o o - -
106 308 38 350 48 57 82 394 75 80 150 400 4,95 1 - • • o o o o o - -
112 309 64 400 70 75,5 120 456 100 100 200 500 6,50 1 - • • o o o o o - -
118 H57PC 75 400 53,5 - 113 438 85 90 180 400 4,00 1 - • • • o o o - - -
118 H57PN 150 250 57 - 188 288 85 90 150 400 4,00 1 - • • • o o o - - -
120 H80PC 150 375 77 - 205 430 114 120 200 600 4,20 1 - • • • o o o - - -
120 H80PA 74 498 77 - 129 553 114 120 200 600 4,20 1 - • • • o o o - - -
122 H110PC 150 375 107 - 205 430 155 160 250 750 6,50 1 - • • • o o o - - -
122 H110PA 429 498 107 - 484 553 155 160 250 750 6,50 1 - • • • o o o - - -
124 325PI 10 103 25 - 57 120 38 45 75 150 1,70 0,5 - • - • o o o - - -
126 335PS 40 150 35 - 56,5 166,5 50 52 65 200 2,00 1 - • - - o - - - - -
128 435PU 40 150 35 - 60 170 48 50 75 200 2,10 1 - • • • o o o - - -
130 445PU 50 362 45 - 72 384 64 67 100 300 3,35 1 - • • • o o o - - -
132 445PS 61 125 45 - 83 147 64 67 100 300 3,35 1 • • • • o o o - - -
134 445AU 50 362 45 - 72 384 64 67 100 300 3,35 1 - • • • o o o - - -
136 475PU 74 374 75,5 - 110 410 100,5 105 180 400 4,45 1 - • • • o o o - - -
138 660 50 150 36 - 79 179 55 50 100 250 2,30 1 - • - • o o o - - -
140 770 85 250 51 - 120 285 78 70 150 300 3,45 1 - • - • o o o - - -
142 306CU 43 355 37 - 79 391 55 65 107 300 2,70 1 - • • • o o o - - -
144 308CU 38 350 57 - 82 394 75 80 180 400 4,00 1 - • • • o o o - - -
146 309C 200 400 72 - 256 456 100 100 200 500 5,80 1 - - • • o o o - - -
148 309CU 64 488 75,5 - 120 544 100 100 200 500 6,00 1 - • • • o o o - - -
152 326 61 373 30 37 89 416 59 65 107 300 - - • • • o o o o o - -
156 328 61 373 48 57 116 428 79 80 150 400 - - • • • o o o o o - -
160 319 64 400 70 75,5 128 464 107 100 200 500 - - • • • - o o o o - -
164 329 64 488 75,5 - 128 552 107 100 150 600 - - • • • o o o o - - -
170 478 74 498 75,5 - 112 536 106,5 105 150 400 - - • • • o o o o - - -
174 60PU 115 539 60,5 - 165 589 90 90 150 400 - - • • • - o o o - - -
176 80PU 115 539 80,5 - 195 619 117 110 200 700 - - • • • - o o o - - -
186 495 45 - 35 - 69 - 45 - 100 - - - - • - - - - - - 600 755
188 500 68,5 - 30 - 86,5 - 43 - 100 150 - - - • - - o - - - 630 830
190 510TN 88 - 46 - 132 - 55-77 - 125 - - - - • - - • - - - 940 1220
8 190
192
194
515TN
545
599
88
62
210
-
-
-
46
46
59
-
-
-
132
123
272
-
-
-
55-77
62
85
-
-
-
175
100
220
-
-
-
-
-
-
-
-
-
-
-
-
•
•
•
-
-
•
-
-
-
•
•
•
-
o
o
-
o
o
-
-
-
1060
485
1400
1340
760
2000
8
200 20LT 79 304 32 - 111 336 53 75 75 305 3,90 1 o - - o • o o - - -
202 20LC 79 304 32 - 111 336 53 75 115 305 4,20 1 o - - o • o o - - -
204 30LT 106 506 52 58 140 540 74 95 150 535 5,50 1 - - - o o o o • - -
206 30LC 106 506 52 - 140 540 74 95 150 535 5,00 1 - - - • o o o - - -
208 35LT 104 504 65 70 148 548 95 125 200 600 7,25 1 - - - o o o o • - -
210 35LC 104 504 65 - 148 548 95 125 200 600 7,00 1 - - - • o o o - - -
212 40LT 150 500 112,5 - 208 558 145 180 250 850 12,90 1 o - - o o o o • - -
214 40LC 150 500 104,5 - 208 558 145 180 250 850 11,8 1 o - - • o o o - - -
216 42LT 150 500 138 - 208 558 175 180 250 850 12 1 o - - - o o o - - -
218 45T 300 600 182 180 390 690 220 250 400 1500 13,00 1 - - - o o o o • - -
238 •= standard; O= on request 239
All rights reserved. No part of this publication may be reproduced, translated or transmitted in any form or by any means.
All informations contained in this publication should be taken only as a guide for the use of Brevetti Stendalto products; no responsability can be
accepted for any error or omission. Brevetti Stendalto S.p.A. reserved the rights, without notice, to change design and construction of any products.
Printed by July 2018.
240
CABLE CHAINS CABLE CHAINS CABLE CHAINS CABLE CHAINS
www.brevettistendalto.com