sinc
MAX SIDE LOAD 75kN
17 mm HORIZONTAL RAIL ADJUSTMENT.
reFNo. | X | ¥ We 2
[oars [oe [ [ow | a
|S Ceubber) | nawirao pan vo
LH (rubber) | Rai WITHOUT PAD PLAN. 21mm
1: RAIL WITH PAD 2: RAIL WITHOUT PAD
COMPONENTS
1. Special washer
2. Forging steel clip Minimum assembly width - W = Rail width (F) + 147mm
3. Vulcanized rubber block
SINCHOLD 3120/17/38Sd
A
SINCHOLD Bolted Fixing
F c A RAIL | 1. CLIPREFERENCE | 2. CLIP REFERENCE
mm | mm | mm | WEIGHT | FOR RAILWITHPAD | FOR RAIL WITHOUT
(kg/m) PAD
Qu 70 azo | 70 | 120 | 528 | 3120/17/38 (s) | 3120/17/38 (H)
Qu 80 330 | 80 | 130 | 6369 | 3120/17/38 (S) | 3120/17/38 (H)
P50 132 | 70 152 51.514 | 3120/17/38 (Ss) | 3120/17/38 (H)
S37 az) 63 | 122-372 | 3120/17/38 (S) | 3120/17/38 (H)
uicsa ao | 70 | 159 | Saas | 3120/17/38 (S) | 3120/17/38 (H)
vic 60 aso | 72 | 472 60.21 | 3120/17/38 (S) | 3120/17/38 (H)
56E1 40 | 70 | 159 | 5627 | 3120/17/38 (S) | 3120/17/38 (H)
$33 305 | 58 | 134 | 33.47 | 3120/17/38 (S) | 3120/17/38 (H)
sai as | 67 | 138 | 414 | 3120/17/38 (S) | 3120/17/38 (H)
$49 ms || @ 3a | 49.43 | 3120/17/38 (s) | 3120/17/38 (H)
$54 as | 67 | 154 | 545 | 3120/17/38 (S) | 3120/17/38 (H)
AGS 175 65 15 43.1 3120/17/38 (S) | 3120/17/38 (H)
ATS 200 | 75 35 56.2 | 3120/17/38 (s) | 3120/17/38 (H)
A100 200 | 100 | 95 743 | 3120/17/38 (S) | 3120/17/38 (H)
41 kg AS a7 | 65 | 1365 | 40.7 | 3120/17/38 (s) | 3120/17/38 (H)
50 kg AS a7 | 70 | 154 | 508 | 3120/17/38 (S) | 3120/17/38 (H)
53 kg AS 146 (| 70 i | 3120/17/38 (S) | 3120/17/38 (H)
IScR 60 105 | 60 | 105 40 | 3120/17/38 (S) | 3120/17/38 (H)
IscR 80 130 | 82 | 130 | 644 | 3120/17/38 (S) | 3120/17/38 (H)
‘AFNOR 46 aaa | 62 | a5 «46.36 | 3120/17/38 (S) | 3120/17/38 (H)
BV50-S150 153. | OS 50 | 3120/17/38 (S) | 3120/17/38 _(H)
This clip can be used for a wider sele
fastened with botted or welded base
of ralls than illustrated. Please contact SICNCHOLD forthe full range of possible rals ll alls can be
ips. SINCHOLD may change or improve their products and also alte specifications without notice.
BOLT_CONFIG!
The hexagon headed fixing bolt can TIGHTENING TORGU
be inserted from above or below the bolt 3
supporting structure ~ see adjacent 0.9 bolt 600Nm
Configurations, Please contact SINCHOLD
It itis desired to fix the clip with a {or full installation instructions.
z= |
welded stud, this may be possible.
Please consult SINCHOLD for guidance.
SINCHOLD Port Engineering Co.,Ltd
Tel: 0086-510-83768896 Fax: 0086-510-83768826
E-mail: sales@sinchold.com
‘Add: No.82 Dongzhuang Industrial Park,Yangiao Street, oLD
Huishan District, Wuxi City,Jiangsu Province,P.R.China www.sinchold.com
SINCHOLD 3120/17/38