Now we will see a way to change the panel inside Femoyer,
assuming we have this orphan video for CV358H.B42 1366 x
768 , and we have a screen with Rzlothoon FHD 1920x1080, we have seen the knowledge of the full board certified within the video of course disassembly, we will see the change in Hex directly, but before this must be selected Bnal fits the site you want , for example , what you find inside the Panel folder path tvconfig.img \ config \ panel \
start with the opening Customer_1.ini file, and note that
the roads for many Balhecs and I am not a professional, but he tries to work each consider the most direct route
copying line Bannal fully accredited , for example , and we search
Balvemuar It has been found inside the line Alvemuar go back up quietly for the first line Customer_1.ini file Open Customer_1.ini Pal Notepad2 and th new name o rectifying Bannal disposable b tvconfig.img \ config \ panel We change the name PNL_DEFAULT_1920X1080 as mentioned above and record the file with another name, for example Customer_1_FHD.ini Now open Customer_1_FHD.ini Hex and copy its content and replace Customer_1.ini inside Vimware but with respect to the length of the paragraph Hex .
[ Peace be upon you,
Professor Mohammed has opened us a door was locked from the time and the keys that were not used in the opening of my permanent propaganda to you success and long life allow me to raise this picture that I was the first to give us the key and a thousand thanks
I am not sure about this. I am very diligent and share what I am
with.
We go for the system.img \ framework \ framework-res.apk \ res
The
first VMware is for CV338H-T42 and supports all languages.
************************************************** ***** The
second Vimware was published in the forum as old as
TP.MS338.PB801, and the complaint was that it does not support non-Chinese
Explanation in favor of Mainat as well as Cvxxx Msxxx, Onroyd
and Processors Mstar for dismantling, usb untested on Msxxx
Service Menu: Source + 2580
to save the definition Bannal
move to save the remote
Unpacking or otherwise unpacking Unpack
explained the paths for finding a Customer_1.ini file for Panama,
the three files for the remote mdrv-ir.ko / PM / rc-keymap-tv.ko, 7zip To change Bannal only adjust Customer_1 as image, and after the completion of the USB Keep your TV will show you a message has been Updat config ok Auto restart Balbnal defined above
*********************** *************
to change the remote Ir we are developing a new file and call it