Professional Documents
Culture Documents
No.1854, 17th Main, 5th Block, 30th B Cross HBR Layout I Stage, Bangalore, Karnataka, India, Pincode-
560043
GSTIN NO.:29AACCD6168M1Z3 CIN NO.:U70102KA2007PTC041508
PURCHASE ORDER
Supplier Details PO Details
Name - CLEAN ZONE PO No. - DSMAX PROPERTIES/SKSU/PO/2023/0437
Address - FLAT 105, 1ST FLOOR,TANISANDRA PO Date - 29/08/2023
MAIN ROAD, DSMAX SKYCITY,
CHOKANAHALLI, BANGALORE - 560064 - DSMAX PROPERTIES/SKSU/PR/2023/0342
PR No
Mobile No. - 8197133397
Phone No. -
E-mail - karthik8080@gmail.com
PR Date - 29/08/2023
Contact Person -
Credit Period - 0
Place Of Supply - 29 - Karnataka
Project Name - DSMAX SKYSUBHAM
Supplier GSTIN No - 29BEZPK9926H1ZG
GSTIN NO. - 29AACCD6168M1Z3
Rate in
Sr Item HSN Description of Goods Basic Disc.
Unit Qty Rate % CGST SGST Total
No. Code Code Amount Amt
(GST)
1 ADMHKP Acid - 5 Litre- Can 10.0 92.00 920.00 0.00 18.00 82.80 82.80 1,085.60
0002
2 ADMHKP Colin - 500 ml- Nos 15.0 84.00 1,260.00 0.00 18.00 113.40 113.40 1,486.80
0011
3 ADMHKP Hard broom- Nos 250.0 28.00 7,000.00 0.00 0.00 7,000.00
0013
4 ADMHKP Soap Oil - 5 Litre- Can 10.0 92.00 920.00 0.00 18.00 82.80 82.80 1,085.60
0001
BASIC AMOUNT 10,100.00
Amount in word : Ten Thousand Six Hundred and Fifty Eight Only
Total CGST 279.00
Total SGST 279.00
Total IGST 0.00
Total Freight Amount 0.00
Total Other Charges 0.00
Total Load/Unload Charges 0.00
Total Discount Amount 0.00
NET AMOUNT............................................ 10,658.00
Note On PO :
3. BILL / INVOICES:
Delivery Challan and Invoice should carry following information,(1) TIN No. (2) VAT/CST, ED No (3) PO No. & date (4) Line Item No. as per our P.O. (5)
Description (6) Quantity (7) Rate. (8) Test Certificates wherever applicable
5. INSPECTION: Page 1 of 2
DS MAX PROPERTIES PRIVATE LIMITED
No.1854, 17th Main, 5th Block, 30th B Cross HBR Layout I Stage, Bangalore, Karnataka, India, Pincode-
560043
GSTIN NO.:29AACCD6168M1Z3 CIN NO.:U70102KA2007PTC041508
Final inspection and acceptance of materials shall be carried out at our site and in case of any deviations, defects w.r.t. IS standards and/ or specifications
furnished, materials are liable for rejection and the same shall be replaced at your cost and risk.
6.WARRANTY / GUARANTEE :
The vendor shall submit all manuals, guarantee / warranty documents applicable as discussed or as applicable for full & final payment.
7. RISK PURCHASE:
During execution of this order, if any delay is observed due to reasons attributable to you other than force majeure conditions, DS MAX is at liberty to
cancel the order in
11.WEIGHT TOLERANCE:
Quantity tolerance will be considered up to +/- 0.5 perc of the total PO Qty.
Comman remarks:-
Accepted By
Page 2 of 2