Professional Documents
Culture Documents
2 / 77
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5 Page. 3 / 77
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu
TABLE OF CONTENTS
Dais is a official distributor of truck body builders, a trailer and semi-trailer manufacturer.Satisfied
customers using our vehicles are the proof hereof. Many years of experience and a high innovation ability
are the basis to offer tailor-made designed transport solutions to our customers. Our carefully selected,
world-wide recognized system suppliers, too are combined in our extensive quality management system.
Certification according to DIN EN ISO 9001:2000 guarantees a high quality level of ROHR vehicles for
commercial use also in future. Economic efficiency as well as safety for human beings and the
environment is our main precept; the highest possible customer satisfaction always our main target.
Road Tankers Semi-trailer type offer a maximum pay-load
ROHR produces semi-trailers for mineral oil supply to petrol stations with a tank capacity of up to 50.000
l. Tanks are shaped either in the well-known cylindrical/round and box-type shape or, and this in new, in
a cylindrical/elliptical shape. The weight-optimized ROHR-design is well developed, tried and tested and
offers an empty weight reduction of 10 % and a vehicle length of less 1 m compared to conventional
designs. A low high-centre of gravity point and a tipping-over safety device, build-in in series, ensure a
safe and excellent road performance, even in fringe range conditions. More pay-load due to the reduced
empty-weight for lower logistic costs and positive economic side effects.
SEME-TRAILERS:
Technical
Material Aluminum alloy 5764
Seals Acryl-nitril or Viton
Temperature -20ºC to +70ºC
3
Max air flow 7000m /h at 0.35bar
Weight 9.5 kg
Standarts EN13314, EN13317, ADR 6.7
(CW) T400-249217GJ – 20”
Size
(58D) T400-240017GJ – 20”
10” PAF
With locking system
Hose for overfill sensor
Hole for P/V valve w/ flamearrester
Security facility for padlock, wire or plastic seal
Automatic sealing of the P/V vent in a roll over situation
Secure 24-bolt fixing as required by ADR
Manhole covers
T400-249217GJ (CW) 20” alum
T400-240017GJ (58D) 20” alum, type 58D
Т400-PFC01A PAF 10” with lock
ACCESOIRES
58-41-84 20" WELD RING ALU, 5.3 MM
6835 20" WELD RING Steel
NV3000E High-flow P/V vent, EN14595
LC01013 Dip tube assy, 2m
12022 O-ring 10” for PAF, pos.9
11728 Spring, pos.7
11730 Latch Roller, pos.15
11732 Roller Pin, pos.16
11740 O-Ring for PAF, Viton, pos11
51-30-32 Seal 20” for manlid
58-00-28 Plug 1 ¼” for 58-00-28D
Part # Price
AH-1155101
PFN-1BA
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 10 / 77
Pneumatic accessories
PN-REG16 Fastener
Selection:
TECHNICAL CHARACTERISTICS:
1 2 3 4 5 6
Working pressure: 10 bar.
FFBV- A 80- F F- V
Test pressure: 15 bar
Burst pressure: 50 bar 1. Name: FFBV
Materials: 2. Orientation: S – globe, A – angle, T – T-type
Body: aluminum 3. Size: 50, 80, 100
Flanges: Alum, steel 4., 5. Connection: F - flange PN 10/16, M – Male thread, F – Female
Internal parts: ALU, SS thread, T – TW flange, W – for welding, R – wafer type
Seals: VITON, TEFLON 6. Seals: V – Viton, T – PTFE
Size/sphera: DN50/45, DN80/70, DN100/98 7. Actuator /Option/: A
ZVA32 Nozzle
EA305 Piston assembly
EA389 Lever assembly 55 mm
ED237U Seal 16 x 5 x 5 PU
EF184 Hold-open latch
EK324 Plastic cover (scuffguard) black
EO271-VI O-ring 35 х 2,5, Viton
EO301 O-ring
EO317 O-ring
ER312 Spout 39 x 185
EU226 Washer dia. 16 mm
HIFLO-Automatic nozzle DN 32 (1¼"), flow rate up to
200 l/min. Working
pressure 1,5 - 6 bar. For
gasoline, diesel, fuel oil,
petroleum, Avgas and
Jet-A1. N o t suitable
for viscous oils and
water or solvents.
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 15 / 77
You can find hose ends, swivels and fitting in catalog “FITTINGS”. Suitable hose you can find in
catalog “HOSES”
SPARE PARTS FOR ZV 400/500
Part # Name Price
EA400 Piston assembly standard
EB401 Stem
EB405 Pull rod
EB533 Lever pin
EB534 Split pin
EC408 Circlip 51 x 2
ED357 Sliding washer 40x30x1
EF162 Main spring 86 x 2 mm
EF411 Check valve spring
EG403 Lever
EG407 Stem bearing
EG467 Plastic glass insert
EK413 Check valve poppet
EK415 Bellow
EM551 Ring nut M 30
EO447 O-ring
EU406 Washer dia. 21 mm
EV402 Piston
EW6 Assembling tool
GSD-50-NBR Seal for TW-50
TWK-50AG-MS Crown, 2” М thread
TWK-5040AG-MS Crown, 1 ½” М thread Other flat seals you can find in catalog “Fittings”
TWM-50-MS Ring for TW w/ lever Other ZVA parts – in catalog “STATIONS”
VD-24/11-PE Flat seal PU 24/11 Other couplings – in catalog “Fittings”
VD-47/34-PE Flat seal PU 47/34 Hoses – in “HOSES”
VD-48/39-PE Flat seal PU 48/39
VD-60/49-PE Flat seal PU 60/49
Swivels
Price
Inlet Outlet Bar Part #
-MS -SS
1”AG 1”AG 10 36SLD-5 / DG-100100-MS
1 ½”AG 1 ½”AG 10 DG-150150-AA-
1 ½”AG 2”AG 10 DG-150200-AA-
2 “AG 2”AG 10 DG-200200-AA-
2”AG 1 ½”IG 10 DG-200150-AI-
1”IG 1”AG 10 36SLD-4 / DG-100100-MS
1”IG 1”M NPT 25 DG-100100-IN-
1”F NPT 1”M NPT 25 DG-100100-NN-
1 ¼”IG 1 ¼”AG 10 DG-125125-IA-
1 ½”IG 1 ½”AG 10 DG-150150-IA-
2”IG 2”AG 10 DG-200200-IA-
For special application as JET, biodiesel, chemicals, AdBlue and others please contact the office.
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 16 / 77
Vent valves
• Material: aluminum Т195SVE Vapor recovery vent, EN13083
• Internal pressure: 500 mbar 1995RK Repair Kit 1995RK
• Working t° : -20°C to +70°C VAPOR-LINE VENT WITH TW-FLANGE
1995TWD-2B
• Flow rate: 950 m3h @ 55 mbar (replaces 1995TWD-2)
• External pressure: 2 to 7 bar 1995TWD-2BRK Repair kit 1995TWD-2B
• Connection: 3” TW VAPOR-LINE VENT (SMART VENT) WITH
199TWD-SV
• Self opening at: 60 mbar TW-FLANGE
• Seal: Viton GFLT 1995TWD-RK Repair Kit 199TWD-2
VAPOUR HOSE, LENGTH 15 CM, EXCL
LC-94021
CLAMPS.
SK-088 Clamp 80-85mm, for LC-94021
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 17 / 77
PKVF Vent valve, pneumatically actuated for tank venting leak-proof in case of overturned tank.
PKVF-65/1B . sequence control, prepared for flamearrester
AH-1231398
LTD … tº= -25ºC ÷ 70ºC
PKVF-65/1B-N. sequence control, prepared for
AH-2180897
flamearrester LTD … tº= -40ºC ÷ 60ºC
PKVF-65/1B-C. sequence control, with mounted cover. tº=
AH-1640697
-25ºC ÷ 70ºC
PKV-65/1B. parallel control, prepared for flamearrester
AH-1052604
LTD … tº= -25ºC ÷ 70ºC
LTD Flamearresters. For mounting on PKVF
AH-2180904 LTD-3B-60, 3”, low profil, TW. Conn. DN60.
AH-1667811 LTD-1B-60, 3”, TW. connection DN60.
AH-1320960 LTD-1B, 3”, TW. Conn. oval flange
AH-1321079 O-ring 95x2 NBR for LTD-1B and LTD-1B-60
AH-1320994 Screen Glas for LTD
AH-1320986 Ring for LTD. 3 holes
PVRVF Coaming vacuum safety vent
PVRVF 4 A1 – Vapour-transfer-valve with sequence
control, pneumatically actuated, for mineral oil tankers,
AH-1362581
non-corrosive vapours. for DN 80 hose, Self-opening at
vacuum 30-40 mbar, Temperature range: -25 to 70°C
PVREV Coaming vacuum safety vent with End-of-Line Flame Arrester
DAIS provides all spare parts for valves and flamearresters. For more information call the office phone.
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 18 / 77
DAIS offers a full range of sensors, testers, connectors and other equipment systems against
overfilling. Both optical and thermistor.
The OPWFTG Civacon Liberty
overfill prevention system is designed for tank
trucks, tank-truck loading bays, storage depots
and service stations. In the event of a possible
overfill situation sensed by the Liberty sensors,
the Liberty rack monitors output relay will send
a signal to a terminal automation system to
shutdown the loading operation.
The Liberty failsafe and self-checking
electronic sensors are available as 2-wire
Thermistor, 2-wire quick start Optic, or 5-wire
Optic.
Directive 94/63/EC 20.12.1994 taken to
control emissions of organic substances during
storage and transport. The important points are:
• 4.3. Referenced connectors must be located on one side of the vehicle.
• 5. Safety lock
• 5.1. Filling is prohibited until there permissive signal from the combined overflow monitor and
grounding. In case of overflow or loss of grounding, the control unit must close drip valve.
• 5.2. Filling hose is permitted only for vapours is not connected to the truck and the free passage
of vapours laundering system to the oil terminal.
• This means that the connectors must be equipped with a pressure sensor. Despite the directive in
the EN13922 for overflow protection writes that the plug must be 10-pin with 4-J slots and a black cap.
ADR cable, oil resistant, ozone and weather resistant, black, 5-wire, according to optic
sensor wire colors
ADR5075-1 Per meter
ADR5075-100 Roll 100 meters
COUPLUNGS AND ACCESSOIRES
API PATTERN OPTIC SOCKET, 6-PIN, BASEEFA, 3 J-
4103E
SLOTS, replaces 4100E.
4103E WITH PRESSURE SWITCH CONFORM VOC 94/63C.
4103E-PS
Replaces 4100PS
4150-4150 Blue cap and cable for 41030E
10-PIN THERMISTOR SOCKET, GREEN CAP, 4 J-SLOTS.
4403E
Replaces 4101E
4450-4450 Green cap and cable for 4403E
10-PIN optic/thermistor socket w/ pressure switch, conform
4403B
EN13922 & VOC 94/63C, 4 J-SLOTS. Replaces 4101B.
Part # Price
ERV-G50-TW
ERV-G65-TW
ERV-G80-TW
ERV-G100-TW
Selection: ERV-G50-TW
1 2 3 4
ERV- G 50- TW
1. Name
2. Type: G-Yellow. For light fuels.
3. Size /DN/: 50, 65, 80, 100, 125, 150, 200
4. Connecting: TW – with TW flanges fro tank trucks
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 20 / 77
2 Wire
The SCS sealed parcel delivery system Sensors
SCS monitor
1.12. HOSES
2” 2 ½” 3” 4”
1м
1,5м
2м
3м
3,5м
4м
4,5 м
5м
5,5 м
6м
The price of the hose ends are included male thread.
Hoses are available in sizes that are not listed in the table.
DAIS offers a hose equipped with a desired quick link from the catalog "FITTINGS".
1. GGE Product name
Selection: GGE-030040-FTDB 2. Lenght: in cm, from 0100 to 3000 /100cm to 3000cm/.
3. Size: 10 – 1”, 15 – 1 ½”, 20 – 2”, 25 – 2 ½”, 30 – 3”, 40 – 4”
1 2 3 4 5 4. First end: BF – male thread; FT – flange; KM – quick connector
KAMLOK, TW, Storz; TD – DDC
GGE- 0300 40- FT DB
5. Second and: as pos 4.
# Part # Price
I.D. O.D. WP BP W Bend R
1. IH36531012 32 42 10 bar 30 bar 0,98 190 mm
2. IH36531002 38 48 10 bar 30 bar 1,13 240 mm
3. IH36530205 50 60 10 bar 30 bar 1,46 300 mm
4. IH36531001 63,5 75 10 bar 30 bar 2,09 380 mm
5. IH36530208 75 87 10 bar 30 bar 2,68 450 mm
6. IH36530211 100 114 10 bar 30 bar 4,02 600 mm
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 23 / 77
# Part # Price
I.D. O.D. WP BP W Bend R
1. IH36522309 19 31 16 bar 64 bar 0,60 125 mm
2. IH36522310 25 37 16 bar 64 bar 0,89 150 mm
3. IH36522311 32 44 16 bar 64 bar 1,00 175 mm
4. IH36522312 38 51 16 bar 64 bar 1,30 225 mm
5. IH36522313 50 66 16 bar 64 bar 2,00 275 mm
6. IH36522314 63.5 79.5 16 bar 64 bar 2,40 300 mm
7. IH36522315 75 91 16 bar 64 bar 2,80 350 mm
8. IH36522316 100 116 16 bar 64 bar 3,80 450 mm
# Part # Price
I.D. O.D. WP BP W Bend R
1. TW19 19 31 20 bar 30 bar 0,8 70 mm
2. TW25 25 37 20 bar 30 bar 0,9 80 mm
3. TW32 32 44 20 bar 30 bar 1,2 90 mm
4. TW38 38 51 20 bar 30 bar 1,4 100 mm
5. TW50 50 66 20 bar 30 bar 2,1 130 mm
6. TW63 63 79 20 bar 30 bar 2,8 160 mm
7. TW75 75 91 20 bar 30 bar 3,3 180 mm
8. TW80 80 96 20 bar 30 bar 3,5 190 mm
9. TW100 100 116 16 bar 25 bar 4,7 250 mm
For hoses with steel helix ELAFLEX XTW, LTW, hoses w/o steel helix HD, FHD, XHD and other hoses please consult
office.
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 24 / 77
DAIS presents industry leader for reels Alfons Haar. We offer spare parts and
elements.
Reels are operated manually, pneumatically or
hydraulically. You can find and very compact reels
that seamlessly installed between the cab and the
vessel to tanker.
Operation:
Part # Name Price
AH-1627178 Operation kit. Chain, plate, etc..
AH-1629634 Handle HK92
AH-S118591 Hydraulic motor 11 cm³/rev MZFS
AH-S118559 Hydraulic motor 16 cm³/rev MZFS
AH-S104140 Hydraulic motor 19 cm³/rev MZFS
AH-1662275 Pneumatic motor AirSTAR 237
For a concrete offer for the reel with or without drive please contact our office.
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 25 / 77
BLACKMER TX
Pumps series Blackmer TX are specialy designrd for hydrocarbons – gasoline, diesel, kerosene, light
fuels, light oils, JET. Positive displacemet. Double shaft. Integrated by-pass. Макс. pressure 8.6 bar.
SBM150G + VEGA T Electric head: VEGA T with options: temperature compensation , pre
set, valve control
High precision flowmeter SBM150
- 3”; Flow rate from 100 to 1300 l/min
- Material: aluminum
- Accuracy: +/- 0,1 %; Repeatability: 0,01%
- Certifications: MID, ATEX and PED
Equipped with: strainer; air separator; pneumatic check valve;
pneumatic 2-stage control valve; plate
Application: for pump or pump discharging with or without pre set
SBM75 + VEGA T
Electric head: VEGA T with options: temperature compensation , pre
set, valve control
High precision flowmeter SBM75
- 2”; Flow rate from 50 to 500 l/min
- Material: aluminum
- Accuracy: +/- 0,15 %; Repeatability: 0,02%
- Certifications: MID, ATEX and PED
Equipped with: strainer; air separator; check valve; pneumatic 2-way
control valve; plate
Application: for pump discharging with or without pre set
SBM150 CEE
Mechanical head VR7887
High precision flowmeter SBM150 CEE
- 2”; Flow rate from from 100 to 1300 l/min
- Material: aluminum
- Accuracy: +/- 0,1 %; Repeatability: 0,01%
- Certifications: MID, ATEX and PED
Equipped with: strainer; air separator, check valve;
Application:for gravity discharging w/o pre set
ACCESSOIRES
VEGA-T
Precision Electric head suitable for SBM32, SBM75, SBM150, P9000.
Specially designed for tanks with large display. Iintuitive controls, Ex,
power battery, temperature compensation. Preset amount.
Suitable for connection to any meter.
GRAVICOMPT advantages
• High accuracy, repeatability & reliability
• Efficient double pulse transmitter for low flow control
• Very low pressure drop, optimum flow-rate
• Flow range: 8-80 m3/h, TTMA flanges, Sight glass
• Reverse flow 150 m3/h for bottom loading
• Category: Ex II 2 G
• Pulse transmitter: 2H00: Ex II 2 G (m) or Ex II 1 G (ia)
ELECTRONIC HEAD
• Category: Ex II 2 (1) G
• Compliance with OIML R. 117 & EMC
• Controls delivery operations, flow regulation, quantitypreset
• Connection to Cab Printer, Bill of delivery, Bills,Reports
• Allows compartment Sealing, connection to on-boardcomputer
• Bright and large display, robust Push-Buttons, easyto-use
1.16. Manifolds
CF1x-yy
x – Number of compartments
yy – distance between center of API adapters: 11”
(2800mm); 14” (356omm)
CF2x-yy
x – Number of compartments
yy – distance between center of API adapters: 11”
(2800mm); 14” (356omm)
- At around this time, a new alternative fuel Liquid Petroleum Gas (LPG) came onto the market. OMSP
Macola recognised the importance of this product because of its new properties which were better for the
environment. Thus we began to focus on designs for LPG and this led in 1978 to OMSP Macola bringing
out the first LPG trucks for road transportation.
- To do this, the company needed more space and equipment so we expanded to a second factory near
Padua’s industrial zone.
- We soon consolidated our position in the market, stopped manufacturing goods for the petroleum sector,
and started to specialise in making self-supporting tanks for transporting liquefied gases by road.
- We began to manufacture for the European market and were soon known throughout most of Europe,
the Middle East and Northern Africa.
- 1997 was a turning point for OMSP Macola because we moved offices (600 m2) and production plant
(4,200 m2) to a new site of 23,000 m2 in the industrial zone of
Saonara near Padova, 800 m from the exit to Padua’s industrial
zone on the Venice-Bologna motorway.
- In 2005 OMSP Macola opened a subsidiary in Romania for the maintenance and servicing of our large
fleet of gas tankers sold in eastern Europe.
- Today we are ISO 9001 certified, have doubled the surface with a second workshop and office building
on the Saonara site and have become a leader at EU level in the gas road tanker industry with a
production of approximately 150 gas road tankers per year, for LPG, CO2, LIN, LAR LOX transport.
This production is exported throughout Europe and in parts of Africa and the Middle East.
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 39 / 77
ELAFLEX LPG
Hose Construction
Tube: Nitrile rubber (NBR), black, seamlessly extruded, electrically conductive,
diffusion resistant
Reinforcement: 2 textile braids/2 crossed tinned copper strands
Cover: Chloroprene (CR), black, perforated, electrically conductive, flame and
abrasion resistant, ozone - UV and ageing resistant.
# Part # Price
I.D. /mm/ O.D. /mm/ Work P Burst P Weight /kg/ Bend R
ROBUR
1. IH36520565 19 39,5 50 bar 620 bar 1,03 100 mm
2. IH36520566 25 38,5 50 bar 560 bar 1,41 150 mm
3. IH36520567 32 45,6 30 bar 440 bar 1,82 200 mm
4. IH36520568 38 52 30 bar 340 bar 2,00 280 mm
5. IH36520569 51 66,5 30 bar 320 bar 2,86 350 mm
GASTRUCK 1762
6. IH36520580 19 31 25 bar 100 bar 0,61 160 mm
7. IH36520581 25 38 25 bar 100 bar 0,83 200 mm
8. IH36520582 32 45 25 bar 100 bar 1,00 250 mm
9. IH36520583 38 52 25 bar 100 bar 1,27 320 mm
10. IH36520584 50 66 25 bar 100 bar 1,84 400 mm
LPG
11. LPG19 19 31 25 bar 40 bar 0,6 100 mm
12. LPG25 25 38 25 bar 40 bar 0,8 150 mm
13. LPG32 32 45 25 bar 40 bar 1,0 175 mm
14. LPG38 38 52 25 bar 40 bar 1.2 200 mm
15. LPG50 50 66 25 bar 40 bar 2,0 250 mm
For other hoses see catalog INDUSTRIAL HOSES.
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 40 / 77
Reducion Female ACME x Male NPT for liquid phase (w/o vapour equalizing), brass
Part # NPT thread ACME thread Price
3175B ½” M NPT 1 ¾” Female ACME
3175 ¾” M NPT 1 ¾” Female ACME
3175A 1” M NPT 1 ¾” Female ACME
A3175A 1” M NPT 1 ¾” Female ACME, steel
3185 1 ¼” M NPT 2¼” Female ACME
A3185 1 ¼” M NPT 2¼” Female ACME, steel
3195 2” M NPT 3¼” Female ACME
Reducion Female ACME x Male NPT for liquid phase (with vapour equalizing), brass
3171 3/8” NPT 1¼” ACME
3171А ½” NPT 1¼” ACME
3181 ¾” NPT 1¾” ACME
3181А 1” NPT 1¾” ACME
3191 1 ¼” NPT 2 ¼” ACME
Elaflex
Accessoires
Part # Bar Body Thread Height Price
Cap
3127G ¼” 50 -
17.2
3129G ½” 66 3129-10*
3127H MS ¼” 50 -
19 7545-40
3129H ½” 66 3129-10*
3127P ¼” 50 -
20.7
3129P ½” 66 3129-10*
3127J ¼” 50 -
24.1 MS 7545-40
3129J ½” 66 3129-10*
3127K ¼” 50 -
25.9 7545-40
3129K ½” 66 3129-10*
3125L MS 40 included
¼” -
3127L 27.6 50 7545-40
3129L ½” 66 3129-40P 3129-10*
3127U ¼” 50 -
31 MS 7545-40
3129U ½” 66 3129-10*
Needle Valves 1224, 1316 and 1318. Inlet male NPT x outlet male NPT
Part # Inlet Outlet Price
1224WA ¼” male NPT ¼” male NPT
1316WA 9/16” male NPT 1/8” male NPT
1318WA 9/16” male NPT ¼” male NPT
Vent Valves
Part # Connection Operation Price
TSS3169 Tee Handle
3165C ¼”NPT Knurled
3165SC Slotted
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 46 / 77
DAIS presents internal foot valves REGO. Suitable for LPG and NH3. They
can be manually or pneumatically driven and have built excess flow valve.
DAIS offers full range of repair kits, maintenance kits, seals and tools for ReGo products. For more
information contact the office.
Tools
Part # Name Price
А8434-40 Tool for А8434
А8436-40 Tool for А8436
3195-50 Aluminium key for ACME thread
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 49 / 77
VEGA T
Precision Electric head suitable for BM200GPL, SBM75GPL.
Specially designed for tanks with large display. Iintuitive controls, Ex,
power battery, temperature compensation. Preset amount.
Suitable for connection to any meter.
LPG-Tronic
Get all the advantages of a Turbine Meter :
- Long life reliability, more than 10 years without parts to change
- High accuracy and stability, stop loosing product !
- Small and light, easy to install, easy to calibrate
ETALCOMPT
Mobile flowmeter for LPG. 2”,connection on ACME thread.
Accuracy +/- 0.5%, Repeatability 0.02%
Working pressure 40 bar (tested at 60 bar)
Flow rate from 6 to 30 m3/h
MA7-A. LPG Meter with mechanical register, differential valve, air
eliminator and strainer
Size: 50mm / 2 "
Flow Range 38-380L/min
Max. Pressure 25Bar/350PSI
Accuracy ±0.2%
Repeatability ≤0.05%
Seal & Gasket Buna"N";Viton;Teflon available
Stranier Mesh 200M LPG only
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 50 / 77
2.11.1. Pumps
Standard mobile pumps for LPG. With a double shaft for direct coupling to the PTO or hydraulic
pump. With built-in by-pass. Full range of spare parts for LPG pumps in stock.
TLGLF3 and TLGLF4 pumps are designed for connecting directly to the flange of the container truck.
This reduces the need for piping, valves, external vazduhootdeliteli that reduce flow and introducing air.
As a result, we have a long life and reliability.
The pumps are equipped with a shaft on both sides. They also have a second emergency drain
output. In addition, both pumps have internal valve reduces noise and vibration
LGLF3 is compact and very easy to work truck. Flow rate from 227 to 416 ref / min.
Pressure up to 8.62 bar.
Blackmer are manufacturer and by-pass valve for LPG. Dimensions are 1 ", 1 ½", 2 ".
2.12. Compensators
ORANGE BAND expansion joints for LPG acc. to EN 589. For tank trucks and refuelling stations.
Temperature range -20°C up to +90°C, temporarily up to 100°C. Electrically dissipative.
Liner: NBR (nitrile), seamless; Reinforcement: PA textile cord; Cover: CR, pricked; Marking: Orange
band, ERV DN .., PN 25, production date; Flanges: Swiveling, DIN 2635/PN 40 carbon steel, zinc plated
Pos Description Qty Part No Price Pos Description Qty Part No Price
1 Crankcase Assy – with Oil Filter (std) 1 BM-792100 20 Bearing Cover Plate 1 BM-793106
Crankcase Assy – no Oil Filter BM-792103 21 Oil Seal 1 BM-793143
Crankcase Assy - with Ext. Shaft BM-792155 22A Bearing Adjustment Shim Kit 1 BM-793133
Crankcase Assy - Ext Shaft&Oil Filter BM-792171 30 Oil Filter Fitting 1 BM-794725
1A Crankcase 1 BM-792102 60A Gasket - Oil Screen * 1 BM-792136
2 Oil Intake Screen 1 BM-792135 60B Gasket - Oil Screen Plug * 1 BM-792123
2B Oil Filter 1 BM-794726 60C Gasket - Inspection Plate * 1 BM-792122
2C Breather Filter 1 BM-792070 60D Gasket - Bearing Carrier Assy 1 BM-792124
3 Oil Screen Plug 1 BM-792145 60L Gasket - Oil Pump Cover * 1 BM-794721
5A Oil Pump Kit 1 BM-794760 61A O-Ring - Oil Screen * 1 BM-792175
7 Oil Pressure Gauge 1 BM-790012 61D O-Ring - Oil Bayonet * 1 BM-792174
11 Oil Bayonet Assembly 1 BM-792162 63C Capscrew - Hex Hd 4 BM-793116
12A Inspection Plate 1 BM-792105 63D Capscrew - Soc Hd 4 BM-790559
13A Bearing Carrier 1 BM-792104 63E Capscrew - Hex Hd 4 BM-792093
15A Bearing Cup 2 BM-793126 63U Capscrew - Hex Hd 6 BM-792093
16 Crankshaft Assy (w\ 18A,19,96B) 1 BM-792157 72B Elbow 1 BM-790453
Crankshaft Assy-Ext (w\ 18A,19,96B) BM-792191 73A Pipe Plug 1 BM-792166
18A Bearing Cone 2 BM-793142 96A Pipe Plug 1 BM-790488
19 Orifice 2 BM-792146 96B Pipe Plug 2 BM-790309
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 58 / 77
DAIS offers all consumables and spare parts for the products of ETA, France, butterfly valves, hoses,
special milk armored and special rubber lining of food, different sizes, and electric centrifugal pumps,
flow meters for food.
DAIS also offers a machine for cleaning the inside of tanks, specially developed and patented by the
company ETA, France.
Rubber Hose Parker. Different size - 1 ', 2', 3 ', etc.. For more
information you can find in the catalog HOSES. Models:
DRINKPRESS WB/L10, GAMBRINUS WB, ENOTRIA,
FALERNO, MILK SM, RESILO, suitable for different products.
Certificates F.D.A. Coupled with appropriate fittings and clamps
PVC hoses Parker ; Models ALIREX, ENOREX, APERSPIR,
VINITPRES, ITTIREX. Certificates F.D.A., coupled with
appropriate fittings and clamps.
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 60 / 77
NOTE! For special applications please contact our office, also about certificates for a concrete food
product.
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 61 / 77
# Part # Price
I.D. O.D. WP BP Weight R min
1. IH30351256 25 37 30 bar 90 bar 0,88 150 mm
2. IH36351250 32 44 30 bar 90 bar 0,95 320 mm
3. IH36351251 38 51 30 bar 90 bar 1,20 380 mm
4. IH36351253 50 66 30 bar 90 bar 1,93 500 mm
# Part # Price
I.D. O.D. WP BP Weight R min
1. IH36811530 25 37 16 bar 64 bar 0,87 230
2. IH36811531 32 44 16 bar 64 bar 1,07 260
3. IH36811532 38 51 16 bar 64 bar 1,35 340
4. IH36811534 50 66 16 bar 64 bar 2,29 410
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 62 / 77
Ball valves for stainless steel. Seals from PTFE. Many types..
Butterfly valves model 899, PTFE liner, Disc from SS, stainless steel scrape
244, seals from Viton..
899-DI50-01 DN50, with handle, cast iron body
899-DI80-01 DN80, with handle, cast iron body
899-DI100-01 DN100, with handle, cast iron body
899-SS50-01 DN50, with handle, stainless steel body
899-SS80-01 DN80, with handle, stainless steel body
899-SS100-01 DN100, with handle, stainless steel body
Butterfly valves with wide range of seals. Cast iron body, stainless steel disc
TM-1152050 DN50, NBR seal
TM-1152065 DN65, NBR seal
TM-1152080 DN80, NBR seal
TM-1152100 DN10, NBR seal
TM-1157050 DN50, Silicone seal
TM-1157065 DN65, Silicone seal
TM-1157080 DN80, Silicone seal
TM-1154050 DN50, Viton seal
TM-1154065 DN65, Viton seal
TM-1154080 DN80, Viton seal
Butterfly valves, Teflon coating on the inside, scrape stainless steel fully
Teflon, Teflon seals. Suitable for sulfuric, hydrochloric and nitric acids.
TM-1155050 DN50, PTFE seal
TM-1155050 DN65, PTFE seal
TM-1155080 DN80, PTFE seal
5.3. Fittings
Hose fittings: KAMLOK, TW and many others. Stainless steel and type
FSL from catalog „FITTINGS”
Teflon flanges.
Teflon male and female threaded ends
Teflon Swivels, reductions, nipples, flanges and more.
Teflon couplings: KAMLOK, TW, STORZ, GUILLEMINE,
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 63 / 77
5.5. Flowmeters
Stainless steel flow meters ISOIL. Kit with air separator, strainer,
check valve.
Mechanical or electronic control head. Sizes 2” up to 6”. Approved
type.
DAIS offers full range of spare parts.
Approved for commercial metering.
VEGA-T
Precision Electric head suitable for INOX meters. Specially designed
for tanks with large display. Iintuitive controls, Ex, power battery,
temperature compensation. Preset amount.
Suitable for connection to any meter.
5.6. Compensators
Rubber joints ERV-GRxx (green). For acids and bases and
aggressive materials, where xx is the diameter of 25, 32, 40, 50, 65,
80, 100, 125, 150, 200, 250, 300, 350, 400, 500, 600. Operating
pressure 16 bar to size DN150, and 10 bar above DN150. Swivel
flanges PN10/16. Are not suitable for drinking water. Please consult
the chemical compatibility.
ERV-GR50-10 DN50, steel flanges
ERV-GR65-10 DN65, steel flanges
ERV-GR80-10 DN80, steel flanges
ERV-GR50-10 DN50, stainless steel flanges
ERV-GR65-10 DN65, stainless steel flanges
ERV-GR80-10 DN80, stainless steel flanges
NOTE! For special applications and chemical compatibility of the chosen items please do not hesitate to
contact our DAIS office.
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 65 / 77
You can find a lot of hose ends, quick qouplers, manometers, valves, etc. in our catalogs
6.3. COMPRESSORS
DAIS represent on the Bulgarian market screw compressors BLACKMER
Mounting on the tractor directly with cardan shaft or
hydraulic motor, if there is no possibility for shaft
drive. Flow rate of 250 to 1500 m3 / h Suitable for
cement, flour, lime, grain, limestone, sand, sugar,
gravel, feed, PVC granules
More information can be found in the catalog "Bulk
tanks and equipment" in our office and on the addresses www.cisterni.eu
and www.vintovikompresori.com
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 66 / 77
6.4. Hoses
# Part # Price
I.D. O.D. W.P. B. P. Weight Bend Rad
CEMENT SM 10
1. IH36923105 75 93 10 bar 30 bar 3,53 450
2. IH36923102 100 118 10 bar 30 bar 4,80 600
CEMENT 713 10
3. IH36822217 75 93 10 bar 30 bar 2,92 900
4. IH36822220 100 120 10 bar 30 bar 4,29 1200
LIBECCIO EN ISO 3861
5. IH36820209 80 105 10 bar 40 bar 4,32 800
6. IH36820211 100 125 10 bar 40 bar 5,30 1000
ZD
7. ZD75 75 91 6 bar 30 bar 3,0 400
8. ZD100 100 120 6 bar 30 bar 4,5 550
# Part # Price
I.D. O.D. W.P. B. P. Weight Bend Rad
AIRTEMP 220
1. IH36346012 65 83 10 bar 30 bar 2,40 455
2. IH36346013 75 93 10 bar 30 bar 2,62 550
KS
1. KS65 65 83 10 bar 30 bar 2,40 455
2. KS75 75 93 10 bar 30 bar 2,62 550
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 68 / 77
VII. COUPLINGS
DAIS offers a full range of hose ends and all types of fittings, such as: KAMLOK, KAMVALOK,
DRYLOK, TW, STORZ, GUILLEMINE and others.
In the catalog "FITTINGS" you will find complete information about fitting, materials and
dimensions.
7.1. KAMLOK
SS MS AL SS MS AL
633A ½"
¾"
633B ½"
¾"
1" 1"
1¼" 1¼"
1½" 1½"
2" 2"
2½" 2½"
3" 3"
4" 4”
5” 5”
6” 6"
SS MS AL SS MS AL
633C ½"
¾"
633D ½"
¾"
1" 1"
1¼" 1¼"
1½" 1½"
2" 2"
2½" 2½"
3" 3"
4” 4”
5” 5”
6” 6”
SS MS AL SS MS AL
633E ½"
¾"
633F ½"
¾"
1" 1"
1¼" 1¼"
1½" 1½"
2" 2"
2½" 2½"
3" 3"
4” 4”
5” 5”
6” 6”
SS MS AL SS MS AL
634A ½"
¾"
634B ½"
¾"
1" 1"
1¼" 1¼"
1½" 1½"
2" 2"
2½" 2½"
3" 3"
4” 4”
5” 5”
6” 6”
7.2. TW
Coupling Adappter
VK-5040-MS
MK-50-MS VK-50-MS
MK-80-MS VK-80-MS
MK-100-MS VK-100-MS
VK-5040-SS
MK-50-SS VK-50-SS
MK-80-SS VK-80-SS
MK-100-SS VK-100-SS
Chain
K200 TWH-50-MS
TWH-80-MS
GSD-…-.. Seal for high pressure or suction from a great height. Different material for
making
7.3. GUILLEMINE
Information on size, materials and spare parts for GUILLEMINE you will find in the catalog
"FITTINGS" or consult the office. DAIS offers reductions to other connectors.
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 70 / 77
VHV - Hose fittings (ferrule MHV - Hose fittings (ferrule VC - Male hose couplings
MC - Female hose fittings
type) , male thread, suitable type) , female thread, suitable with re-usable safety
with re-usable safety clamps.
for self-assembly for self-assembly clamps
SK-E Single bolt clamps SZ- Double bolt clamps SC – Safety clamps
7.5. Reductions
DAIS offers a full range of reductions, reducers, flanges and nipples, stainless steel, brass or
aluminum. For more information see catalog "FITTINGS" or call us for consultation at the office.
Reductions Double nippel Nippel reduction Socket Socket reduction
8.1. Flanges
Square flange kit: two flanges, two seals and bolts. TQFA-ST91
For BLACKMER pumps and strainers. Without rim TQFA-ST115
for welding TQFA-SS91
TQFA-AL77
DAIS, accept requests for production of road signs of the Bulgarian language oversized,
special, agricultural and other goods. Please if you do not find your desired product in our catalog do
not hesitate to contact us for more information by phone.
9.1. Standard and folding embossed panels
Embossed panel SS Neutral device 300х400x1 Horizontal folding SS Embossed panel SS, convertible petrol –
automatically convertible mm, alum-vertical folding holder 300х400, for diesel. 300x400 + 300x80
petrol - diesel, 300x400 with bracket numbers 70x118mm
BC-91452 BC-91207 BC-92110 BC-91451
Warning triangle box 430 x Wheel chock appoved DIN 76051 Hodel for wheel chock with Wheel chock appoved DIN
65 x 35 mm plastic hook 76051 with holder
BC-70090 BC-95805 BC-95807 BC-95806
Eyewash bottle Eyewash bottle with 200 Eyewash liquid 200мл First aid kit
saline solution
BC-95503 BC-95504 BC-95517 BC-95603
Dangerous substances for the Self-adhesive flammable gases Self-adhesive flammable gases Self-adhesive inflammable
environment cl. 2 cl. 3 gases on contact in water cl. 4
BC-99639 BC-99628 BC-99602 BC-99605
Self-adhesive toxic gases cl. 2 Self-adhesive inflammable solid Self-adhesive comburent or Self-adhesive spontaneously
cl. 4 organic reroxides cl. 5.2 inflammable substances cl.4
BC-99629 BC-99603 BC-–99636 BC-99604
Self-adhesive radioactive Self-adhesive corrosive Self-adhesive non inflammable Self-adhesive general danger
substances category 2, cl.7/B substances cl.8 compressed gas cl.2 cl.9
BC-99611 BC-99614 BC-99601 BC-99615
Self-adhesive fissile material Self-adhesive toxic substances Self-adhesive biological danger Self-adhesive radioactive
cl.7 cl.6.1 and decaying matter cl.6.2 substances category 1, cl.7/A
BC-99630 BC-99607 BC-99609 BC-99610
Self-adhesive radioactive Self-adhesive radioactive cl.7/D Self-adhesive signal for Self-adhesive comburent or
substances category 3, cl.7/C transport over 20°C, cl.9 organic reroxides cl. 5.1
BC-99612 BC-99613 BC-99624 BC-99625
Sofia 1528, No.3 Poruchik Nedelcho Bonchev Str., fl.5
T.+359 2 973 2370, +359 2 973 2665, F.: +359 2 973 2665
email: office@daisglobal.eu, www.daisglobal.eu Page. 76 / 77
Rear reflecting/reflecting truck panels with conformity with regulation ECE 070 amendmend 01
0.8mm alum 0.8mm alum 1.2mm alum 2mm alum стикер
Fig.1. BC-90151 BC-90154 BC-90095 BC-90157 BC-99204
Fig.2. BC-90152 BC-90155 BC-90086 BC-90158 BC-99205
Fig.3. -- BC-90156 BC-90088 BC-90159 BC-99206
Rear reflecting/fluorescent truck panels with conformity with regulation ECE 070 amendmend 01
0.8mm alum 0.8mm alum 1.2mm alum 2mm alum стикер
Fig.1. BC-90160 BC-90163 BC-90094 BC-90168 BC-99207
Fig.2. BC-90161 BC-90164 BC-90166 BC-90169 BC-99208
Fig.3. -- BC-90165 BC-90167 BC-90170 BC-99209
Rear reflecting/reflecting truck panels with conformity with regulation ECE 070 amendmend 01
0.8mm alum 0.8mm alum 1.2mm alum 2mm alum стикер
Fig.4. BC-90171 BC-90174 BC-90096 BC-90177 BC-99214
Fig.5. BC-90172 BC-90175 BC-90090 BC-90178 BC-99215
Fig.6. -- BC-90176 BC-90092 BC-90179 BC-99216
Rear reflecting/fluorescent truck panels with conformity with regulation ECE 070 amendmend 01
0.8mm alum 0.8mm alum 1.2mm alum 2mm alum стикер
Fig.4. BC-90180 BC-90183 BC-90093 BC-90188 BC-99217
Fig.5. BC-90181 BC-90184 BC-90186 BC-90189 BC-99218
Fig.6. -- BC-90185 BC-90187 BC-90190 BC-99219