You are on page 1of 1

Operator Daily inspection

51001

zzz
Operator’s Daily Inspection Log C4000
Cargot ec

Model______________ Serial No.______________ Week Beginning______________


Shift No. ____________________
Mark appropriate box with X OK
OK Requires Service Unit No._____________________
Inspect the Combilift before each shift. If the Combilft is found to need service or if during operation the Combilift becomes unsafe report the situation
immediately to the designated authority. Do not operate the Combilift or attempt to service it. Service is to be performed by a qualified service technician.

Mon Tues Wed Thurs Fri Sat Sun


Damage
bent, dented, or broken parts OK OK OK OK OK OK OK
Leaks
hydraulic lines, mast, hoses OK OK OK OK OK OK OK
Tires
chucks missing, loose lug nuts OK OK OK OK OK OK OK
Forks
bent, damaged, warn OK OK OK OK OK OK OK
Chains, Cables, Hoses
leaks, greased, warn OK OK OK OK OK OK OK
Hour Meter
Operating OK OK OK OK OK OK OK
Engine
smell, sound, belts tight, warn OK OK OK OK OK OK OK
Engine Oil Level
Acceptable range OK OK OK OK OK OK OK
Engine Coolant
Acceptable range OK OK OK OK OK OK OK
Hydraulic Oil Level
Acceptable range OK OK OK OK OK OK OK
Safety Devices
warning lights, work lights, seat belt, motion alarms OK OK OK OK OK OK OK
Horn
operates OK OK OK OK OK OK OK
Mode Change (standard & sideward)
Wheels rotate smoothly, no binding, no unusual noise OK OK OK OK OK OK OK
Steering
standard & sideward mode, no excessive play or restriction OK OK OK OK OK OK OK
Travel ( forward / reverse)
no unusual noise, smooth shift of lever OK OK OK OK OK OK OK
Hydraulic Controls
forks-lift/lower, mast-in/out, tilt, attachment functions OK OK OK OK OK OK OK
Inching Pedal
stops travel, smooth deceleration OK OK OK OK OK OK OK
Parking Brake
functions and releases OK OK OK OK OK OK OK
Limit Switches
allows travel when activated OK OK OK OK OK OK OK
Hour Meter Reading
Operator's Initials
Supervisor' s Approval

NOTES (regarding repair or adjustment)

You might also like