Professional Documents
Culture Documents
You have made an investment, a good one, Our watch care programme 11
and the aim of this handbook is to help you
Keeping in touch 12
make the most of that investment during what
I hope will be a lifetime of ownership.
Christopher Ward
1
C60 Trident Day Date COSC
Introducing a complication long sought after Over the years, the Trident has become a cornerstone
by our customers, the Trident Day Date is the collection for Christopher Ward, thanks to its modern
latest addition to the Trident family. dive watch aesthetic and robust build quality.
The Day Date is the most practical addition to the
Whilst sharing a number of features with the Trident range yet; exclusively limited to 200 pieces, its place
Pro 600 – it has the same marine-grade stainless in the Trident canon is assured.
steel case, guilloche dial and signature seconds hand
Trident counter-balance – the Day Date has undergone
a number of changes, aesthetic and mechanical.
2
C60 Trident Day Date COSC
Technical information
Features Technical
1 2 3 4
4
How to operate your C60 Trident Day Date
For a superior water resistance your crown is PLEASE NOTE: Date correction should not be
of the screw-in type. The crown should sit carried out between 20.00 hr and 02.00 hr as
flush to the case (position 1) in order to maintain the watch gearing will already be aligning itself
water resistance. to change the date. The crown should always be
pushed in after adjustment, and it is best to do
• First unscrew the crown anti-clockwise from the so from position 3 to avoid advancing beyond
case to position 2 for winding in power. Wind in the desired date.
a clockwise direction to re-power the watch.
Your C60 Trident has a maximum power reserve You must always ensure the crown is fully
of 38 hours when fully wound. Normal wearing tightened before any use in water.
will allow the rotor to start re-powering the
watch over time after putting it on your wrist.
• Pull gently into position 3. For rapid day
correction, turn in an anti-clockwise direction.
For rapid date correction, turn in a clockwise
direction.
• Pull gently into position 4. This position is used
for handsetting and stopping of the second hand.
For precise time setting it is recommended to
pass beyond the desired minute and to set the
hand backwards.
5
How to operate your C60 Trident Day Date
If using the bezel for a dive and let‘s say the recognised
maximum “no-stop time” is 55 minutes, then in this
example (shown right) the time at the surface immediately
before the dive is 10.08am.
–
You can now read that the 55 minute no No decompression limit
decompression limit will occur at 3 minutes
past the next hour. Start of dive
6
7
How to operate your C60 Trident Day Date
3.
Thread the strap through
the opening to the desired
position. Close the clasp.
8
How to operate your C60 Trident Day Date
9
How to operate your C60 Trident Day Date
For these reasons, the water resistance rating of your 30 ATM (300 metres)
watch (as shown) should only ever be considered Ideal for experienced divers and
a guideline and we strongly recommend they are those practising scuba-diving.
always adhered to.
60 ATM (600 metres)
Professional divers, experiencing
prolonged exposure underwater.
11
Keeping in touch
From small beginnings just a few short years ago As the owner of a Christopher Ward watch,
(our first workshop was actually a refurbished if ever you need to get hold of us we are at
chicken shed!), Christopher Ward has won a worldwide your service. We have listed some useful
following for his eponymous watch brand and can contact details on the back cover.
justifiably claim to manufacture the most affordable
luxury watches in the world. There is also always something new going on at
our website at www.christopherward.co.uk
For many, the philosophy behind the brand, of trying and, if you haven’t already discovered the
to put luxury watches within the reach of everyone, independent forum dedicated to our brand at
is as attractive as the watches themselves, as www.christopherwardforum.com we would
is the very open approach of the business which recommend a visit. Informative and fun,
means that Chris and the team spend a lot of time it’s a great place to hear the unexpurgated
communicating personally with our customers – view of Christopher Ward.
many of whom have become friends.
12
Head Office
1 Park Street, Maidenhead,
Berkshire SL6 1SL
United Kingdom
Customer Services
UK: +44 (0)1628 763040
USA: +44 (0)1.877.226.8224
customerservices@christopherward.co.uk
technical@christopherward.co.uk
christopherward.co.uk