Professional Documents
Culture Documents
Haldia Petrochemicals Limited states that the product fully conforms to the requirement of IS 7328:2020.
Properties of the product are tested in accordance with Scheme of Inspection and Testing contained in the BIS Certification
Marks License CM/L No. 5100208172
Additional Requirements: This complies with the requirements, recommendations, or communications of:
IS 10146:1982 on Specification of Polyethylene for its safe use in contact with Foodstuffs, Pharmaceuticals and
Drinking Water
IS 16738:2018 on Positive lists of constituents of Polypropylene, Polyethylene, and their Copolymers in contact with
Foodstuffs, Pharmaceuticals and Drinking Water. The total quantity of Antioxidant used in this grade is less than 0.3%.
21CFR 177.1520 of US FDA. According to our information, all additives and constituents used in the grade meets the
requirements of their respective FDA regulations and 21 CFR 177.1520
The tested value presented herein are of representative samples from the lot in accordance with BIS Scheme of Inspection and Testing. Prior to use, buyer shall ensure independently through
tests and trials, that HPL products can be handled and used by them legally, safely, and suitably for their intended operation and end-use application. No warranty or guarantee expressed or
implied is made regarding performance or otherwise. In no event shall HPL be liable for any damage, loss or injury directly or indirectly suffered as a result of use of product or information
provided herein. The information & data contained herein are reliable to the best of our knowledge on the date of release of the document and is subject to change without prior intimation based
on research & development work undertaken by HPL.