Professional Documents
Culture Documents
Created by:
Phone:
Date: 07/07/2023
Qty. Description
1 NKG 100-65-315/295 AA1F2KESBQQEVW1
Non-self-priming, single-stage, centrifugal pump designed according to ISO 5199 with dimensions and rated
performance according to ISO 2858. Flanges are PN 16 with dimensions according to EN 1092-1. The pump has an
axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the
motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework.
The unbalanced rubber bellows seal is according to DIN EN 12756.
The pump is fitted with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common
base frame.
Controls:
Frequency converter: NONE
Pressure sensor: N
Liquid:
Pumped liquid: Water
Liquid temperature range: -25 .. 120 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³
Technical:
Pump speed on which pump data are based: 2978 rpm
Rated flow: 167.1 m³/h
Pump with motor (Yes/No): Y
Rated head: 109.8 m
Actual impeller diameter: 295 mm
Nominal impeller diameter: 315
Type of impeller: Standard
Code for shaft seal: BQQE
Mechanical seal type: Single
Curve tolerance: ISO9906:2012 3B
Bearing design: Standard
Materials:
Pump housing: Stainless steel
EN 1.4408
ASTM CF8M
Wear ring: Stainless steel
Flange: Cast iron
EN-GJS-500-7
ASTM 70-50-05
Impeller: Stainless steel
EN 1.4408
ASTM CF8M
Internal pump house coating: No coating
Shaft: Stainless steel
EN 1.4401
Date: 07/07/2023
Qty. Description
1 AISI 316
Installation:
Maximum operating pressure: 16 bar
Pipe connection standard: EN 1092-1
Type of inlet connection: DIN
Type of outlet connection: DIN
Size of inlet connection: DN 100
Size of outlet connection: DN 65
Pressure rating for connection: PN 16
Coupling type: Flexible w/o spacer
Base frame design: EN/ISO
Code for base frame: 10C ST
Grouting (Yes/No): Y
Electrical data:
Rated power - P2: 75 kW
Number of poles: 2
Motor No: 92910027
Others:
Minimum efficiency index, MEI ≥: 0.65
Net weight: 1050 kg
Gross weight: 1140 kg
Shipping volume: 2.25 m³
Date: 07/07/2023
130
295 mm
120
110
100 100
90 90
80 80
70 70
60 60
50 50
40 40
30 30
20 20
10 10
0 0
0 20 40 60 80 100 120 140 160 180 Q [m³/h]
Pumped liquid = Water
Liquid temperature during operation = 20 °C
Density = 998.2 kg/m³
P2 NPSH
[kW] [m]
80 40
70 35
60 30
50 25
40 20
30 15
20 10
10 5
0 0
Date: 07/07/2023
H NKG 100-65-315/295, 50Hz eta
Description Value [m] [%]
General information:
Product name: NKG 100-65-315/295 130 295 mm
AA1F2KESBQQEVW1
120
Product No: On request 110
EAN number: On request 100 100
Technical: 90 90
Pump speed on which pump data 2978 rpm 80 80
are based:
70 70
Rated flow: 167.1 m³/h
60 60
Pump with motor (Yes/No): Y
50 50
Rated head: 109.8 m
40 40
Actual impeller diameter: 295 mm
30 30
Nominal impeller diameter: 315
20 20
Type of impeller: Standard
10 10
Shaft diameter: 42 mm
0 0
Code for shaft seal: BQQE 0 20 40 60 80 100 120 140 160 180 Q [m³/h]
Mechanical seal type: Single Pumped liquid = Water
Liquid temperature during operation = 20 °C
Curve tolerance: ISO9906:2012 3B
Density = 998.2 kg/m³
Pump version: A1 P2 NPSH
[kW] [m]
Bearing design: Standard
Materials:
70 35
Pump housing: Stainless steel
Pump housing: EN 1.4408 60 30
730
330 1164
=
415
130
848
90
6
x
28
280
100
19
19
4
8
x
65
140
125 1524
0 0
Impeller: ASTM CF8M
Internal pump house coating: No coating
Material code: K
1524
Code for rubber: E 125 140 65
4 x 19
Installation:
130
415
830
890
Date: 07/07/2023
Description Value
Controls:
Frequency converter: NONE
Pressure sensor: N
Others:
Minimum efficiency index, MEI ≥: 0.65
Date: 07/07/2023
280 415
130
19
4 x
65
19
x
8
890
848 830
140
330
=
28
x
6
1164
1824
1524
=
90
330
125
730
100
Date: 07/07/2023
Order Data:
Position Your pos. Product name Amount Product No Total
NKG 100-65-315/295 1 On request Price on
request
Date: 07/07/2023
Qty. Description
1 NKG 100-65-315/295 AA1F2BESBAQEVW1
Non-self-priming, single-stage, centrifugal pump designed according to ISO 5199 with dimensions and rated
performance according to ISO 2858. Flanges are PN 16 with dimensions according to EN 1092-2. The pump has an
axial suction port, a radial discharge port and horizontal shaft. It is of the back pull-out design enabling removal of the
motor, coupling, bearing bracket and impeller without disturbing the pump housing or pipework.
The unbalanced rubber bellows seal is according to DIN EN 12756.
The pump is fitted with a foot-mounted, fan-cooled asynchronous motor. Pump and motor are mounted on a common
base frame.
Pump and motor are mounted on a common steel base frame in accordance with ISO 3661. The back pull-out design
makes it possible to service the pump when the pump housing is still connected to the inlet and discharge pipes.
1) Remove the bolts in the bearing bracket support foot and motor foot.
2) Remove the bearing bracket and the motor from the pump housing.
Pump
The pump housing has both a priming and a drain hole closed by plugs. The impeller is a closed impeller with
double-curved blades with smooth surfaces. The impeller is statically balanced according to ISO 1940-1 class G6.3
and hydraulically balanced to compensate for axial thrust.
The pump is fitted with an unbalanced rubber bellows seal with torque transmission across the spring and around the
bellows. Due to the bellows, the seal does not wear the shaft, and the axial movement is not prevented by deposits
on the shaft.
Seal faces:
• Rotating seal ring material: carbon graphite, metal-impregnated
• Stationary seat material: silicon carbide (SiC)
Due to the favourable lubricating properties of carbon graphite, the seal is suitable for use even under poor lubricating
conditions, such as hot water.
However, under such conditions, wear on the carbon graphite face can be expected, and seal life will be reduced .
The material pairing is not recommended for liquids containing particles as this will result in wear on the SiC face.
Secondary seal material: EPDM (ethylene-propylene rubber)
EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.
The shaft is made of stainless steel and has a diameter of 42 mm where the coupling is mounted.
The pump uses a standard coupling between the pump and motor shaft.
Date: 07/07/2023
Qty. Description
1
The base frame is prepared for grouting. Grouting improves the contact of the base frame with the foundation and
stiffens the base frame construction. This changes the vibration level.
Grouting is mandatory for all base frame types for all 2-pole pumps equal to and above 55 kW to fulfill the max
vibration level requirements stated in standards. For other pump motor combinations grouting of the base frame is
optional.
Motor
The motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DIN standards. Electrical
tolerances comply with IEC 60034.
Technical data
Controls:
Frequency converter: NONE
Pressure sensor: N
Liquid:
Pumped liquid: Water
Liquid temperature range: 0 .. 120 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³
Technical:
Pump speed on which pump data are based: 2978 rpm
Rated flow: 167.1 m³/h
Pump with motor (Yes/No): Y
Rated head: 109.8 m
Actual impeller diameter: 295 mm
Nominal impeller diameter: 315
Type of impeller: Standard
Code for shaft seal: BAQE
Mechanical seal type: Single
Curve tolerance: ISO9906:2012 3B
Bearing design: Standard
Materials:
Pump housing: Cast iron
EN-GJL-250
ASTM class 35
Wear ring: Brass
Impeller: Bronze
CuSn10-C
Internal pump house coating: CED
Shaft: Stainless steel
EN 1.4301
Date: 07/07/2023
Qty. Description
1 AISI 304
Installation:
Maximum operating pressure: 16 bar
Pipe connection standard: EN 1092-2
Type of inlet connection: DIN
Type of outlet connection: DIN
Size of inlet connection: DN 100
Size of outlet connection: DN 65
Pressure rating for connection: PN 16
Coupling type: Flexible w/o spacer
Base frame design: EN/ISO
Code for base frame: 10C ST
Grouting (Yes/No): Y
Electrical data:
Rated power - P2: 75 kW
Number of poles: 2
Motor No: 92910027
Others:
Minimum efficiency index, MEI ≥: 0.65
Net weight: 1040 kg
Gross weight: 1130 kg
Shipping volume: 2.25 m³
Date: 07/07/2023
130
295 mm
120
110
100 100
90 90
80 80
70 70
60 60
50 50
40 40
30 30
20 20
10 10
0 0
0 20 40 60 80 100 120 140 160 180 Q [m³/h]
Pumped liquid = Water
Liquid temperature during operation = 20 °C
Density = 998.2 kg/m³
P2 NPSH
[kW] [m]
80 40
70 35
60 30
50 25
40 20
30 15
20 10
10 5
0 0
Date: 07/07/2023
H NKG 100-65-315/295, 50Hz eta
Description Value [m] [%]
General information:
Product name: NKG 100-65-315/295 130 295 mm
AA1F2BESBAQEVW1
120
Product No: On request 110
EAN number: On request 100 100
Technical: 90 90
Pump speed on which pump data 2978 rpm 80 80
are based:
70 70
Rated flow: 167.1 m³/h
60 60
Pump with motor (Yes/No): Y
50 50
Rated head: 109.8 m
40 40
Actual impeller diameter: 295 mm
30 30
Nominal impeller diameter: 315
20 20
Type of impeller: Standard
10 10
Shaft diameter: 42 mm
0 0
Code for shaft seal: BAQE 0 20 40 60 80 100 120 140 160 180 Q [m³/h]
Mechanical seal type: Single Pumped liquid = Water
Liquid temperature during operation = 20 °C
Curve tolerance: ISO9906:2012 3B
Density = 998.2 kg/m³
Pump version: A1 P2 NPSH
[kW] [m]
Bearing design: Standard
Materials:
70 35
Pump housing: Cast iron
Pump housing: EN-GJL-250 60 30
730
330 1164
=
415
130
848
90
6
x
28
280
100
19
19
4
8
x
65
140
125 1524
0 0
Shaft: Stainless steel
Shaft: EN 1.4301
Shaft: AISI 304
1524
Installation: 125 140 65
4 x 19
415
830
890
Connect code: F
Liquid:
Pumped liquid: Water
Liquid temperature range: 0 .. 120 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³
Electrical data:
Rated power - P2: 75 kW
Number of poles: 2
Motor No: 92910027
Controls:
Frequency converter: NONE
Pressure sensor: N
Others:
Date: 07/07/2023
Description Value
Minimum efficiency index, MEI ≥: 0.65
Date: 07/07/2023
280 415
130
19
4 x
65
19
x
8
890
848 830
140
330
=
28
x
6
1164
1824
1524
=
90
330
125
730
100
Date: 07/07/2023
Order Data:
Position Your pos. Product name Amount Product No Total
NKG 100-65-315/295 1 On request Price on
request